Had that little yellow angle finder for 10 years, now I finally know how to use it! Thank You!

Hey man I know topics like this seem rudimentary to some but for guys like me who forget things or "been awhile" since I've done angles with a miter this video was the perfect refresher! Thank you for making this. This was explained super easy not only to comprehend but using many tools of today made your demonstration very easy to remember!!! Oddly enough I just needed a refresh finding a odd angle on some aluminum pipe I'm cutting pie cuts from and just needed to see someone use basically and specifically all these tools you used and just made me life soooo much easier!! Thank you

I think this video has saved me! Now I can install my dollhouse baseboards and crown molding with more precision. You have no idea how much I appreciate this upload. I hope you live a charmed life, Caliber8 Tools.

Oh my, I couldn't believe my eyes when I saw the yellow angle finder on your video. I'm like other, I've h ad one for years and had no clue how it works. Thanks for sharing this video.

Good job with this video. I thought the General angle Finder I have would be simple and easy to use. I always was puzzled by it. You clarified things well and your presentation was very easy to follow. 👏

Thank you so much for this video. It will be a great help in my dollhouse now I finally know how to use my yellow angle finder!

Thank God! You are a blessing from above. I wish I had you as my teacher 50 years ago when I was in class. I could have become a star pupil instead of a struggling dunce. I had to teach myself geometry in my mid-30s because I enjoy DIY projects and I wanted to be better at them. You simplified what can be considered as difficult.

Wish my shop teacher in high school was this eloquent. Oh had a play back button.

You're a great teacher!

"Machined to tolerances beyond belief" 😂😂😂 I'm going to think of that every time I'm measuring something now

Thanks for keeping it simple. Really helped me.

Really like your clear & thorough approach to explaining tbings

Very clear explanation! Did not know how to use the yellow one. Thank you!!

Fantastic job explaining the use and purpose of these angle finders. Thank you.

Thanks, Mister, it never hurts to get a refresher. Definitely has been a while since I was doing production machinist wotk

Excellent video, man. I appreciate you explaining everything and not assuming we understand the basics. 👍🏻

Thank you for taking the time to produce this very informative video. It's very helpful. Have a great life and don't ever stop teaching. Bill

Thanks for posting this how-to-video. I'm using the yellow analog device. Your explanation on using it is excellent.

Thanks so much for doing this. Very clear explanation. Couldn’t make sense of these tools before. Appreciate it.

Looking forward to maybe a future video explaining the use of the other surfaces uses and how-to's!

So incredibly helpful!! Thank you!!! You are an excellent teacher.

Nice, now I have new skill! Thanks

Such a great teacher... wow!!! I finally get it about angles.

Thanks for your videos. They are very helpful and you are a good teacher. What you do matters!

You do a fantastic job teaching!! Very very good!!

I found exactly than I was looking for!!! Thank you so much for the info.

Best video on how to use the empire tool. Thanks so much for this!

Bill, great video. Your a natural teacher.

Straight to the point. Not a lot of chit chat. Tx.

Very good video. I've been away from using these devices for a few years. This is a great refresher.

This helped A LOT.

Brov. Thank you! Now I can go out and finish my kiln :)

Great teaching video.

Great job, just what I needed

Great video! Keep up the good work!

Thanks! Very informative, your video cleared up a lot of confusion for me.

You are a good teacher. Wish I knew you or met you a long time ago. TY :)

You are so smart and this video is very informative. Thank you for sharing. 👍🏻

Great video, thank you!

Very useful. Thank you

This is exactly what I needed. I am trying to hang a wooden bird nesting box in my yard on a wall that has cedar shakes. Cedar shakes are thin at the top and thick at the bottom. I want my bird box to hang straight and not lean back and could not figure out how I was going to figure out the angle to then know how thick of a shim I will need. I am going to pick up the first one you showed tomorrow. Problem solved. Thank you so much for a very useful video.

Thank you for sharing.

thanks my brother, a great video, step by step. great for people with ADHD, me.

Thanks man I subscribed and liked your video. Keep it coming.

Thank you for your content!

Really useful - thanks!

Great video, thanks for sharing.

Great content! Thank you!

Very helpful. Thanks.

This is an incredibly detailed and helpful video. Thanks for putting this together. A question- can you scribe an angle onto a long, flat panel of wood using the analog angle finder? Or would that be a better job for the machinist's protractor? Asking because I need to cut an angled notch out of some wainscoting due to an irregular wall corner shape. And it seems like the analog angle finder is good at identifying the angle, but not as good as scribing an angle line that I can cut along.

Thank you bro. I’m trying to get the right angle for legs on a table . Thankagain

Very helpful,thankyou!

Thanks alot bud! Very helpful 👌

Absolutly useful ❤🌼🌻👌🙏🙌👍👏

Man, Good Job. More videos like this

Thank you!

Thanks for the video it helped me out a lot

Thank you sir i am only ten but using this tool I like your effort Kepp its up!

Good video about how to read angles using angle finders and showing the different types. Two suggestions: #1) show just a little simple geometry with a right triangle and show the 3 angles created when scribing a line - where you scribed a 60-degree angle, also show the viewers the 90 degree angle, and the 30-degree angle, which leads into #2) show viewers how to translate the 60-degree angle you scribed on the 2x4 to the proper angle set-up on a mitre saw, which would be 30-degrees (i.e. 90-60 = 30). One criticism: saying 92.2 is close to 90 is not accurate. Actually, 89.6 or 90.3 is close to 90. In the beginning of your video you mention that being off by a few degrees can be bad, so your video should reflect that when you say you're "close" to something. As a positive, the "90" degree angle you measured, at first glance, looks square, but you're measurement showed otherwise. Looks can be deceiving, so "always measure twice and cut once..."

GREAT VID!

Cool tutorial!

Great video. Please consider to review the sound volume...getting higher especially on the intro part. If you are wearing an earphone...there is a sudden surge of volume.

great stuff

Super helpful Ty

Question so I'm cutting baseboards. When I find the angle as you have shown do I cut both boards at a 50 degree angle or do I divide by 2 and cut both at 25? I'm new to this as you see lol

Can you do one using this to cut crown molding? I have a project later today doing that

I learned a lot. give it time and your channel with grow. you just earned another subscriber :)

Subbed!!

Thank you

Great video for a refresher in basic geometry! There is nothing worse than an ugly angle opposed to acute angle🤣🛫

Thank You…🙌

I hoping to learn more about angle's

Great tutorial; but I am curious on finding angle on a cleaver knife. Thanks

How can you measure an angle on a diameters using the second to the angle gauge?

Hi why we need to check reverse $ Thanks

Wow, glad I found your channel. I have to two non-digital angle finders but never understood them. Thank you for the great explanation!

can you post videos on knifes. Thanks

Drill ka angle kasa sat kari

Security at evergreen.. I see you know your tools..

Finally!! A black guy that knows his stuff.

The first measure, 150, was not flush on both arms. It would have been 135 and 45 or 180. Measure again

Great video, but damn that intro music is loud AF

Why would I "Hit the like button" before watching it Too many presenters assume they are a Billy Big Bollocks whose content automatically deserves a thumb up Everybody knows how it works and you'll get a 👍if it is good

Too much Discourse or speech

Please,check you audios, they are realy bad.

lol! a "how to" video that does it wrong!!! For this tool the object your measuring has to be touching both LEGS. And not a the leg and protractor plate that is shown @4:45. if you do it correctly then your acute angle would read less than 90 like it should.

Wow that was bad...

Well done!