How to Use A Speed Square and Bevel Gauge to Find Angles in Woodworking

Рет қаралды 530,241

4 жыл бұрын

I show you how to use a speed square and a bevel gauge to capture, transfer, and measure angles.
Don't waste your hard-earned money on unnecessary tools. My Free checklist will show you exactly what tools and accessories you need for the beginner to advanced woodworking shop. Download it Free:
⏩ learn.outoftheww.com/woodwork...
Browse my Free project plans:
⏩ www.outoftheww.com/project-plans
Step-by-step details of this video:
⏩ www.outoftheww.com/projects/h...
Discounts on great products (Affiliate Links - I make a small commission at no extra cost to you):
Save 10% on TotalBoat epoxy with code 'otw10'
⏩ www.totalboat.com/product/thi...
Save 15% on Starbond CA glues with code 'OUTOFTHEWOODWORK15'
⏩ www.starbond.com/?rfsn=455729...
Save 10% site-wide on great INTOTHEAM shirts and other clothing:
⏩ intotheam.com/otw10
Special materials used for this project (Affiliate Links):
Speed square - amzn.to/31xHhAb
Bevel Gauge: amzn.to/2KNM22M
Digital Angle Finder: amzn.to/33S1lz7
Tools and other accessories I use:
⏩ www.outoftheww.com/tools-i-use
Follow Out of the Woodwork on these channels:
Instagram: / outofthewoodwork_tommy
Facebook: / oothewoodwork
Music:
Soundstripe.com
About this video:
Today, we generally let the miter saw measure and make our angle cuts. But, learning to capture, transfer, and measure angles is a foundational woodworking and DIY skill that will serve you well.

Пікірлер: 213

@OutoftheWoodwork 4 жыл бұрын

Here's a great jig that turns your circular saw into a do-almost-everything tool and there's a free plan available: kzfaq.info/get/bejne/n5mqha1pzpyrdXU.html Got more speed square, bevel gauge, or angle finding tips and tricks? Put them down here!

@jonathontsamantanis 4 жыл бұрын

You really helped me understand how they determine angles for that bevel tool will come in very handy thank you

@MrNncon 3 жыл бұрын

can you recommend any book's I do renovations finishing and general construciton.. however im always forgetting techniques like this.. short of writing my own book with diagrams etc.. on techniques for install work and tool techniques can you recommend any? books are fine on site. people look at you funny if you watch videos.

@Jorjibou 3 жыл бұрын

Here is one, no one has said so far: suppose you need to transfer a line all around a piece of wood, for instance a 2 X 3. Trace your first line, flange down. Then, holding tight your speed square, scribe along the edge of the flange. There you are on the next side of your stud. Extend the line. And soooo on...

@MarcDeBrauwer 3 жыл бұрын

And for the rest off the world except Myanmar (also known as Burma), Liberia and the US. one inch is 2.54 cm

@jacobjones7814 Жыл бұрын

You are the only one I've seen on KZfaq that has actually done the math.. bravo! I'm union carpenter 25 yrs in. My dad, uncles, grandad all Carpenters. Unfortunately we all were not smart enough to do anything else but we were and are intelligent enough to do the math... In which no one nowadays seems to know how to do. The bevel is used to determine your angle first, not to just only transfer a line to a board. Do the math as well, you will find it's simple. If anyone happens to read this then pay attention, this man is telling you right 👍 Thank you

@hp3078 8 ай бұрын

Love the family tradition & union carpenter 🙏🏽

@xixoxixa 3 жыл бұрын

I've used speed squares for years, and you are the first person I've ever seen explain the angles in relation to a 90 degree line, not the edge of the board the speed square fence goes against. Superb work. Very intuitive and easy to follow.

@OutoftheWoodwork 3 жыл бұрын

Thanks, Brendan! Very kind of you!

@diversedad7954 3 жыл бұрын

This video is gold! It's amazing how long you can use a tool before you actually learn more about it.

@thomasgregory4871 3 жыл бұрын

2:50 - You can also calculate the angle without moving/rotating the speed square. With the speed square flush against the wood, subtract the angle shown from 90. In this case it is 55, so 90 - 55 = 35. It's pretty much what you went through ~5:10. Less worry about errors resulting from moving the speed square.

@Parabellum-X Жыл бұрын

Bro, where have you been all my life?!... For almost 2yrs, I have been trying to teach myself how to use a speed square to make angled cuts on lumber, in order to learn how to cut rafters. I couldn't figure this crap out for NOTHING! ...until I came across this video of yours! It wasn't until you mentioned that the cut is actually in reference to your 90° that I finally had that light-bulb-turned-on moment happen inside of my head. THANK YOU SOOOOOO MUCH!!!

@MarcusT86 3 жыл бұрын

I absolutely love you from the bottom of my heart for this video. For real!

@hdcrook1 3 жыл бұрын

Thank you. This was really well done. Very good explanations, especially when you made clear what the angles are in reference to.

@rockm0001 2 жыл бұрын

Thanks for clarifying all that!!

@lenk132 2 жыл бұрын

Excellent Presentation - Easily understood.

@daxicab1217 Жыл бұрын

Thank you for the visual. Helps so much!

@mazewho7950 4 жыл бұрын

Your a great teacher thank you for going out of your way to pass on your knowledge this has been really helpful. Much appreciated you've gained a new fan my friend. Going to create some angles on a few blocks as guides for when I'm sharpening my chisels and plane blade.

@OutoftheWoodwork 4 жыл бұрын

I'm glad it helped you out and its great to have you!

@woodbutcher Жыл бұрын

I love absolutely everything about your content, dude!

@MorrMedia1 4 жыл бұрын

Wish I had such a clear explanation like this when I was trying to figure out how to use a bevel gauge. Great explanation and tips.

@OutoftheWoodwork 4 жыл бұрын

Thank you!

@MrBollocksChops Жыл бұрын

Very useful video, thanks so much for putting it out!!

@DjCreekboy 4 жыл бұрын

Thanks for the video, learned lots!

@OutoftheWoodwork 4 жыл бұрын

Jesse, glad it helped you out!

@bradmattix4914 2 жыл бұрын

Very informative! Thank you.

@marshallkapell9310 4 жыл бұрын

very thorough and helpful. thank you.

@OutoftheWoodwork 4 жыл бұрын

You are welcome...thanks so much!

@derekharp2805 Жыл бұрын

That's was very educational! Thank you

@drumcrazy72 Жыл бұрын

Great work. Thank you.

@patricktkeegan 4 жыл бұрын

Thanks for the video. I found a bevel gauge in some hand me down tools and wasn't sure how to use it. Now I know!

@OutoftheWoodwork 4 жыл бұрын

It's a great tool when you need it!

@art58wong 3 жыл бұрын

Just adding to the chorus of appreciation. Well done sir.

@OutoftheWoodwork 3 жыл бұрын

Thanks so much!

@tonygilbert2373 2 ай бұрын

Thank you for the great tutorial!

@tcjensenjr Жыл бұрын

Great learning tutorial!

@kerrybolton8881 3 жыл бұрын

Thank you, now I know how to use them properly. Neither came with any info so these simple tips are so worthwhile. Sure helps someone who never had any training or help in explaining their uses. Great.

@davidwolf1814 4 жыл бұрын

Clear and straight forward...Thanks

@OutoftheWoodwork 4 жыл бұрын

Thanks!

@jimleishman785 4 жыл бұрын

I appreciate the clear and informative information. Just subscribed

@OutoftheWoodwork 4 жыл бұрын

That means a lot, Jim, thanks!

@robertgregory6012 3 жыл бұрын

Excellent demonstration of essential tools!

@OutoftheWoodwork 3 жыл бұрын

Glad it was helpful!

@olajikiemi5910 3 ай бұрын

Absolutely top class . Thanks

@DillonMW 4 жыл бұрын

Subbed from just this video! I look forward to watching more.

@OutoftheWoodwork 4 жыл бұрын

Glad to have you, Dylan!

@chriswatson143 Жыл бұрын

Nice easy to understand stuff man

@thomasfoyle2669 3 жыл бұрын

Great video. Thank you.

@johnarwingacis6287 2 жыл бұрын

very helpful video this is what i looking for..im building a wall right now and its steep..thanks a lot

@liaison66 3 жыл бұрын

excellent overview. I am doing a project right now and this will help out a lot!

@OutoftheWoodwork 3 жыл бұрын

Great to hear!

@dplatts14 3 жыл бұрын

Agree with other comments, super clear and to the point - great stuff :)

@OutoftheWoodwork 3 жыл бұрын

dplatts14 thanks!

@spot---8966 2 жыл бұрын

Great explain!!

@williammontgomery4787 Жыл бұрын

Great video!

@zavoina 4 жыл бұрын

Interesting. Thank you.

@OutoftheWoodwork 4 жыл бұрын

Thank you, Andy

@Harossi79 4 жыл бұрын

Finally someone who explained the angle measurements using a speed square clearly-that is in reference to the vertical axis. Thank you!

@OutoftheWoodwork 4 жыл бұрын

Thanks for noticing! I'm sure I'm far from the first or only one to mention it, but I never hear anyone talk about it.

@canadianbeech 4 жыл бұрын

Thank you!

@pianoman6639 Жыл бұрын

Absolutely brilliant video and not over complicated a steady speed allowing the viewer to keep up and comprehend what’s going on . Perfect for me a novice but this has really helped many thanks

@Jrdzpr 3 жыл бұрын

Thank you!! Excellent teacher.

@OutoftheWoodwork 3 жыл бұрын

Thank you!

@jimmiepetsel8813 2 жыл бұрын

This has been one of the most useful videos I've had a chance to see in a while. Something so basic and simple yet was alluding me and this made the light bulb pop thank you and I look forward to checking out more of your videos.

@OutoftheWoodwork 2 жыл бұрын

Glad it helped!

@ebmarson 3 жыл бұрын

Thank you very much. Excellent teaching video

@OutoftheWoodwork 3 жыл бұрын

Thanks so much, Eddy

@MOSTAFA131160 3 жыл бұрын

helpful video, thank you

@wemcal 3 жыл бұрын

Great video and information

@kalania14 7 ай бұрын

Good stuff...Mahalo for posting

@roy1m664 2 жыл бұрын

Just subbed!!! Thanks for sharing!!

@usernamemykel 3 жыл бұрын

Excellent.

@houstonsam6163 3 жыл бұрын

Many thanks for the clear explanation of measuring the angles against the 90. Also for the similar clear principle that a miter is described as the angle cut out, not the angle retained.

@buyznthehood1914 3 жыл бұрын

great info! this will really help me cut the fiber cement siding on my current rehab project's gables. i did it by trial and error. going to buy a bevel gauge tomorrow!

@OutoftheWoodwork 3 жыл бұрын

Glad it helped!

@zanechapman6994 4 жыл бұрын

Used the bevel gauge to help me find that angle to cut my spindles, thanks!

@OutoftheWoodwork 4 жыл бұрын

Glad it was helpful!

@mustafashaun2949 3 жыл бұрын

Thanks alot, great master.

@tonio909 4 жыл бұрын

A wealth of information here, thank you for taking the time to explain all this.

@OutoftheWoodwork 4 жыл бұрын

No problem...thanks for the kind comment!

@FullPictureMedia 2 жыл бұрын

Very concise. 👍

@jackjenkins6305 2 жыл бұрын

Great Video and audio!!!! I needed to find an angle on one of my project, and after watching you video, now I know how. Thank you! I look forward to more of you videos.

@CedricKarlFonk 3 жыл бұрын

Thank you so much for making this video. Through you, I'm learning a lot about woodwork, the tools and instruments used.

@OutoftheWoodwork 3 жыл бұрын

You're welcome!

@jeffwhitney3369 3 жыл бұрын

Damn that was informative as hell dude!

@mabbrey Жыл бұрын

great stuff

@foos.998 3 жыл бұрын

Wow, so much great information in one video. Thanks so much for this!

@ronswoodshack3855 3 жыл бұрын

Thank you

@MrRenoman2011 3 жыл бұрын

Great Video thanks alllot

@gregghernandez2714 3 жыл бұрын

Great video! Here is a pretty cool tip for using a speed square to find the center of the board, especially for wider boards. Start by drawing a straight square line on each side of the both ends of the board. You will use these lines as reference lines. Then take the square, and using the square draw a 45 degree line from the straight line, flip the square over and draw another 45 degree line from the opposite end of the straight line. What you end up with is basically an X with a line on top if that makes sense. Do this on each side of the board. You can now use a straight edge or a chalk line to draw a line exactly from each center of the X. Congrats, you now know exactly where the center is of your board. I hope this makes sense.

@findingalpha1 4 жыл бұрын

This was really great! Thanks for taking the time to make this!

@benjamincullifer165 4 жыл бұрын

This is cool but I was looking at more from a metal fabricators point. I have to fab stuff w all kinds of angles so much some times but this really helped. Thanks.

@OutoftheWoodwork 4 жыл бұрын

Thanks Benjamin! Always cool to hear it helped in a different application

@MrEmanon1233 4 күн бұрын

GREAT. EXPLANATION. 😊😊

@deanbrooks929 4 жыл бұрын

This cleared things right up for me! Awesome information!

@OutoftheWoodwork 4 жыл бұрын

I'm so glad it helped Dean. Thanks!

@rockon5320 4 жыл бұрын

Very well explained. Simple to understand and useful. Thanks for taking the time for beginners.

@OutoftheWoodwork 4 жыл бұрын

You're welcome!

@ron1martens 4 жыл бұрын

Great tips. I'm a plasterer and have to take on jobs just to work. I'm building a pergola for a client. With him. Also brick paving removing paving and modifying. Splitting the angle is useful which I had to do. I have the festool winkel. It's an angle finder visual. Im considering getting the small digital angle finder. Looks useful. Also looked into getting the Bosch electronic angle level.

@diyhacksandmore2644 3 жыл бұрын

Probably the MOST informative video I've ever watched!! You got yourself a new sub

@OutoftheWoodwork 3 жыл бұрын

Thank you and glad to have you around!

@diyhacksandmore2644 3 жыл бұрын

@@OutoftheWoodwork I just got into woodworking and this was the first time I learned so much about such simple tools! Thank you

@peachfilms 4 жыл бұрын

Incredibly helpful. Thanks for making this video.

@OutoftheWoodwork 4 жыл бұрын

You're welcome!

@sasanabdipour 4 жыл бұрын

I am building a Deck in my backyard and the finding angle and transferring it to cut was a challenge . your video is right to the point and solved my problem easily ! thanks a lot !

@OutoftheWoodwork 4 жыл бұрын

Sasan Abdipour You're welcome!

@johnbalogna803 4 жыл бұрын

thanks for sharing your wisdom and making it sound easy lol

@OutoftheWoodwork 4 жыл бұрын

Ha! You're welcome

@kule510 7 ай бұрын

Good video!

@onwardsandupwards3492 3 жыл бұрын

great teacher

@Cybergrip1 Жыл бұрын

Quite handy ~

@TateBugs 3 жыл бұрын

This was super helpful!!! Thank you!

@danitafunk9236 Жыл бұрын

Hi, thank you for being a really good teacher, and for the free plans. I'm sincerely grateful!!

@SALLEN-kn8pw 3 жыл бұрын

Thank you tommy for this video I have watched alot of videos and more confused when I watched them but you are a good teacher thanks for your help

@OutoftheWoodwork 3 жыл бұрын

Thank you...I'm glad it was helpful!

@nalawattagepinto3939 2 жыл бұрын

Very bad teacher he doesn’t know how tip technology wood work are you bla bla 👎🏿

@catfish24 3 жыл бұрын

Great informative video

@OutoftheWoodwork 3 жыл бұрын

Thanks, David!

@MD-cd7em 4 жыл бұрын

GOOD VIDEO..THANKYOU

@OutoftheWoodwork 4 жыл бұрын

M D thanks!

@AB_in_CO 3 жыл бұрын

This is super informative! Thanks for making this video

@durumbadiwe1171 Жыл бұрын

Nice lecture

@TheKellisunshyne 3 жыл бұрын

Thank you for all the knowledge you shared here...you earned a sub!!!

@NWBushman 4 жыл бұрын

This was a really good explanation!!Thank you! Super helpful!!

@OutoftheWoodwork 4 жыл бұрын

Thanks so much!

@juniorlewis9173 2 жыл бұрын

You are such a talented, kind, and very cool guy. You share your plans for free in the description. I wish Glen from DIY Creators would have done that. He offers his woodwork plans for sale on his website. Thanks for being such a wonderful person.

@jk12428 Жыл бұрын

EXCELLENT🌟‼️

@Samurai9901 3 жыл бұрын

Never thought I'd use one as I do wood working as a hobby but I can definitely see how that would be useful. Most informative video I've found on bevel gauges.

@OutoftheWoodwork 3 жыл бұрын

Glad it was helpful!

@tatakatakashi 2 жыл бұрын

Super easy to understand! Thanks!

@paulmaryon9088 7 ай бұрын

Hi great video, thank you, interesting theory on the slot on the bevel, I thought it was to enable getting the opposite angle, and to allow the blade to tuck back into the body of the tool, also another mistake people often make when using the mitre saw is that 0 is actually 90. Thanks again keep 'em coming

@thomashamilton3rd 4 жыл бұрын

Whelp, I wish I had seen this before I spent 2 hours miss-cutting my trim last night... This was a wonderful explanation.

@OutoftheWoodwork 4 жыл бұрын

TJBH sorry you had trouble! Hopefully next time will be better!

@noelv1976 3 жыл бұрын

I definitey need to get that bevel gauge. Trying to use a speed square to get accurate angles really messing me up..should have never skipped geometry class!

@jamesmccornell87 2 жыл бұрын

Dope video I thought it would be for ever before learned how to use these 2 tools 😃👏

@Gary-ts6dh 4 жыл бұрын

Thanks for the bevel guage tut! I have a Swanson SpeedSquare I use a lot ; but, just recently inherited a bevel gauge. Now I don't have to 'figure out' how to use it.

@OutoftheWoodwork 4 жыл бұрын

You're so welcome, Gary, glad it helped!