MEP 802A - Fuel level sender replacement w/improved parts

  Рет қаралды 2,839

CallMeColt

CallMeColt

6 жыл бұрын

Step-by-step on how to replace the fuel level sending unit on a MEP 802A.
Link to the fuel sender on Amazon;
amzn.to/3b9tPJz
As an Associate I earn from qualifying purchases on some of the links that I share.

Пікірлер: 13
@xlandscaper
@xlandscaper 6 жыл бұрын
Nice video. Not to many repair vids of this gen set out there. Keep em coming if you ever work on it. I'll be sure to do the same 👍
@CallMeColtLLC
@CallMeColtLLC 6 жыл бұрын
As I repair things, I plan to do so because of the lack of videos. Share them with anyone you might know that needs them! Planning to do some general use videos as well for those that don't know the features.
@webbac8491
@webbac8491 Жыл бұрын
Great video and information. Many thanks for sharing!
@CallMeColtLLC
@CallMeColtLLC Жыл бұрын
Glad it was helpful!
@serverman328
@serverman328 3 жыл бұрын
@CallMeColt I have been thinking about replacing the sender on my 831a with one of these. Do you remember the Ohms range on that sender for your 802a?
@CallMeColtLLC
@CallMeColtLLC 3 жыл бұрын
I tried to get one for the 831A & the gauge on there isn't compatible. I talked about it in my MEP-831A repair videos. You could also change the gauge & you'd probably be able to get it to work.
@Lordhumongus
@Lordhumongus Жыл бұрын
Have 2 of these. Skid mounted. Very low hours. Both run excellent. One of them randomly says low fuel but I can start it for 3 seconds and then light comes on and it shuts down. Fuel is full to the brim. Gage shows same. What do I need to do?
@CallMeColtLLC
@CallMeColtLLC Жыл бұрын
I have another video showing how to fix that with a link in the description to the item needed. kzfaq.info/get/bejne/pctndNF0kp_LmJc.html
@justinkirk5449
@justinkirk5449 4 жыл бұрын
What do you think is the most common problem of a stuck past Full fuel indicator? I'm thinking open circuit. Wire or Sender?
@CallMeColtLLC
@CallMeColtLLC 4 жыл бұрын
Probably open circuit. Check to see if the float is physically free. Then check the wires. Test the guage & sender. The Technical Manual is extremely usefully. Can be confusing because there's a lot of information in it but it will help you out.
@americanmade389
@americanmade389 5 жыл бұрын
Do you know if that sensor will work on a mep 004a?
@CallMeColtLLC
@CallMeColtLLC 5 жыл бұрын
I can't say as I've never worked on one.
@justinkirk5449
@justinkirk5449 4 жыл бұрын
I guess next all search a video on how to replace a engine on the space shuttle.
MEP 802A - Double float switch replacement
11:44
CallMeColt
Рет қаралды 1,3 М.
MEP 531A & 501A  - Priming fuel system
10:54
CallMeColt
Рет қаралды 1,9 М.
Fast and Furious: New Zealand 🚗
00:29
How Ridiculous
Рет қаралды 45 МЛН
MEP 802A & 803A Well Nut Upgrade
13:15
CallMeColt
Рет қаралды 1,5 М.
MEP 802A MEP 803A Remote Start Kit
28:59
Kurt Klopp
Рет қаралды 9 М.
Getting my Auction MEP-802A Generator Started - First Start
27:42
Diesel Pack Garage
Рет қаралды 10 М.
5 KW MEP 802A full and part load test Oct 1 2016
7:58
Mil Gen
Рет қаралды 16 М.
ROCKET that LITERALLY BURNS WATER as FUEL
19:00
Integza
Рет қаралды 1,9 МЛН
MEP-802a Cold Start, very cold start
5:34
Joe S
Рет қаралды 37 М.
MEP 802A - Fuel tank well nut replacment
8:28
CallMeColt
Рет қаралды 1,9 М.
MILITARY GENERATOR MEP802A GAUGE REPLACEMENT/LOAD TEST
13:49
Xlandscaper
Рет қаралды 2,1 М.
DEMO MEP802a 5kw Military generator walk around features
4:53
NoNonsenseKnowHow
Рет қаралды 43 М.
MEP 803A Rebuild - Part 2
17:50
CallMeColt
Рет қаралды 6 М.