Cam TRUCK NORRIS install on LS Swap Dodge Challenger

Рет қаралды 450

Жыл бұрын

This is a 2012 dodge Challenger LS Swap with a 6.8L Stroker motor that I'm building in this video. I'm putting a truck norris cam ( link down low) and picking out a color to paint the engine block.
Motor came out of a 2005 Pontiac GTO
My family and I earn commision on the links provided, and it helps us with being able to keep making videos, thank you for supporting the channel.
Tuck Norris Cam a.co/d/eXMLWO3
Gold Flake engine Paint a.co/d/3M0pTx9
Welder I use a. co/d/4w7yj59-
Assembly lube amzn.to/3V9tCvz
Thank you for watching the episode Please like and subscribe for more, thanks.

Пікірлер: 3

@mraycgz Жыл бұрын

Good choice. Challengers are heavy anyway. You’ll get more out of a cam line than than a monster on the top end anyway.

@james10739 Жыл бұрын

I mean I don't think you'd be disappointed with the ss2 you'd trade about 20 ft/lbs down low for about 20hp with a little more rpm the ss2 is better after about 4900rpm I mean you probably wond be disappointed with the truck norris either but the ss2 would have saved you like $160 or something you probably would have spent like $20 more for springs but that image from Richard holder was comparing the truck norris to a btr stage 4 truck cam not the sloppy stage 2 and also the best came is right around there too

@thatguysgarage323 Жыл бұрын

Yea I didn’t realize it was the wrong picture I put up, but I compared the two ratings that btr put out, and they were both same price from btr and didn’t want to go with a cheap China one for $100 because I didn’t want to have something wipe out the cam and ruin the motor, and yea stage 2 cam would sound better no lie, but it’ll be fine, just have to get the rpm to match up and make it sound decent either the truck Norris cam