Can-am BRP secondary / driven clutch torsional spring install

Рет қаралды 89,799

AirdamClutches

11 жыл бұрын

How to properly assemble the new 2012+ Can-am BRP secondary driven clutch with the new torsional spring.

Пікірлер: 19

@Yippa391 Жыл бұрын

Been fighting this damn spring for a month. Thank you!!

@kbone7913 4 жыл бұрын

Thanks for the tips! I had purchased my a 2011 Cam Am Commander from a private party, who had an issue with the rear differential they had purchased from Mudd N Wheels. I had sent the diff in and they honored the warranty, however we still couldn't get the car to in gauge under load. So when I inspect the belt I found that the Tightening Bolt for the secondary clutch had back all the way out. I hope once I reinstall with red lock tight, I'll have the issue corrected.

@HossTexan 11 жыл бұрын

Great video adam thank you!

@voip3704 5 жыл бұрын

Thanks man!

@viper7077 3 жыл бұрын

this video just saved my ass!

@Bamabrute85 11 жыл бұрын

Do you do clutch work for the Brute Force? Didnt see it on your website.

@teontaveal35 3 жыл бұрын

Standard or fine thread ?

@vanessalewis1023 2 жыл бұрын

Can I use the spring that don't have the pins on a secondary and helix that has the holes in them

@AirdamClutches 2 жыл бұрын

yes you can use a torsional spring or a flat bottom compression spring in these applications, can-am uses both and the stock secondary and helix will accept either.

@bradhartman7402 3 жыл бұрын

When you use the red locktite do you have trouble getting the bolt back out

@AirdamClutches 3 жыл бұрын

yes, if you use red loctite it can be almost impossible to get out by double-nut method. you will need to weld a nut to the end of the stud

@204_RENNY Жыл бұрын

If I bought a new replacement bolt, would I still need to use loctite?

@AirdamClutches Жыл бұрын

ALWAYS use loctite on the secondary bolt or its going to back out.

@williamblair35 10 жыл бұрын

3rd video?

@jeffbelanger1596 Жыл бұрын

@bengalscin 3 жыл бұрын

I’ve got a 2016 maverick. But the spring don’t have that extra tit to hold it in place ? Suggestions?

@AirdamClutches 3 жыл бұрын

not all can-am have torsional springs. You can watch some of my other install videos to see how to put together a secondary with a standard compression spring like the stock Maverick spring.

@bengalscin 3 жыл бұрын

@@AirdamClutches thanks

@vanessalewis1023 2 жыл бұрын

@@AirdamClutches can I use the spring that does not have the tips on it but my helix and back of secondary