Can-Am X3 CAT Delete..We Try again!

Рет қаралды 18,493

One Off Garage

5 жыл бұрын

Our 2nd shot at the DIY Cat delete on the Can Am X3. This time it went a bit better!!

Пікірлер: 30

@doondood2362 5 жыл бұрын

I just drilled mine out last weekend. Used all kinds of drill bits and tools but it came out pretty clean. Crazy it could breathe enough to run with all that crap in there. It's definitely cooler in the engine/ bed area now. Sounds better too 👌🍻

@oneoffgarage 5 жыл бұрын

We tried that method. Didn't come out well. But we're good now.

@doondood2362 5 жыл бұрын

@@oneoffgarage Haha ya i saw. Was going to buy a pipe but figured wth, its gotta come off anyway. Your way looked much easier

@ricardolopez2940 5 жыл бұрын

you don't have tu tune it? when you buy an aftermarket downpipe or get rid of the cat?

@oneoffgarage 5 жыл бұрын

@@ricardolopez2940 both are machines were tuned before the delete. I would check with your tuner to be sure. Call the guys at wick it perfomance. Good dudes to work with

@sxsmarine4075 4 жыл бұрын

ricardo lopez no you don’t. Don’t buy in to that shit

@johnbecham4326 3 жыл бұрын

Old wood chisel works great same thing I used lol then tig it all back up like new

@alfredthesavage7793 5 жыл бұрын

now you can tune it more. YAA!

@OldSouthernBuzzard 5 жыл бұрын

Great video! How do you have that cooler secured to the deck?

@oneoffgarage 5 жыл бұрын

turnbuckles on each side, eye hook into the cooler and eye hook bolted into the bed. Solid as a rock

@loue9374 4 жыл бұрын

i did kinda the same i only cut one side off an took it all out that way an it was a big Paine getting it all out still that way also

@BIGSCOTTY732 Жыл бұрын

Is that stainless?

@johnnyricketts1772 3 жыл бұрын

Did you have to tune after the delete?

@oneoffgarage 3 жыл бұрын

Nope. No additional tune needed

@dennisdelaney3596 4 жыл бұрын

How much louder is it from stock.

@oneoffgarage 4 жыл бұрын

Just a bit louder, we thought it had a deeper tone.

@Isaacgagne207 4 жыл бұрын

One Off Garage is that with the stock muffler?

@oneoffgarage 4 жыл бұрын

@@Isaacgagne207 yes it is

@cbgranger11 4 жыл бұрын

Well im lazy, went with evo cat delete pipe....but still took all mandatory beer breaks!

@oneoffgarage 4 жыл бұрын

Heck yeah, we put the evo in the first machine too. This was more of an experiment that went well

@rodneyfox30 5 жыл бұрын

Come on just one beer pre break man up

@rodneyfox30 5 жыл бұрын

good job, how about another beer break for saving 300.$

@oneoffgarage 5 жыл бұрын

LOL, no shortage of beer breaks in our garage!

@sxsmarine4075 4 жыл бұрын

You can drill that out with a wood drill in 5 mins and put the pipe back on

@oneoffgarage 4 жыл бұрын

I've heard that, we tried. It's in an earlier video. It just didn't work. I can't see how you can get 100% out with a drill bit. But people claim you can.

@sxsmarine4075 4 жыл бұрын

One Off Garage I have done it about 6 times on my own and friends it’s easy.

@ryanwong1930 3 жыл бұрын

What size wood bit?

@sxsmarine4075 3 жыл бұрын

@@ryanwong1930 kzfaq.info/get/bejne/bMWBlcuoybvFlmg.html. Any size you want. I think I used a 1”1/4

@mandytuning 3 жыл бұрын

@@sxsmarine4075 i tried with concrete bit and hammer drill with no luck,spend 3 hours with a 3/4 chisel and Ball hammer to finally hallow the cat,never thought about a wood drill bit