I second this.

Yes I’d buy it again in a heartbeat. The option to have it partially open is perfect

Okay sweet. Thanks for the replay.

Just the seal

They absolutely do. Instead of putting the bolts in from the outside and using supplied nuts, I put the bolts on from the inside through to use the mirrors to tighten.

@@RustbeltMechanic great info! thanks

I'm wondering that myself.

The hole was already there from where the mirrors would mount before, I just used a little longer bolt from the inside going out into the mirrors.

@Rustbelt Mechanic i did the same, i did not drill out though and use the spacers, i didn't think necessary using the mirrors larger mounting area

No, the weather seal at minimum needs trimmed. I’ll show in an upcoming video what I did

@@RustbeltMechanic any chance you could post a photo on your IG page please?

@@PaulMinster message me on IG and I’ll send some pics later this week.

I would love to see a picture of how it looks around the intrusion bar mounts as well

@@jarradneilson1946 send me a message on Instagram

I had just turned the two mount bolts for the frame around that utilized the same two mirror mount holes. The windshield bolts then held on the mirrors.

Grind the little spacer down like 1/4 inch or so

Did you check to see if there is power getting to it? Always check power and ground before anything else.

@@RustbeltMechanic hey would you be able to send me a picture of the back of your switch wires? Mine came loose so I took them out and for got which place they go in. It’s a 10 pin connection I’m only use to 6 pin. If you can post it here or email me a picture at chert023@gmail.com thank you

I’d love to see them be able to add a modular wiper to this but it does not exist... 2 reason... 1. This isn’t a hard glass. The wiper would break down the “hardened plexiglass coating” and eventually damage it. 2. The current wiper system mounts to the body below the windshield. You would not be able to use the power flip function without unbolting the wiper arm

Ordered mine with one..

@@RustbeltMechanic canam make a washer and wiper kit for the screen now

@@mzwak2001 have you installed it yet?

@@PaulMinster yes I have and really like it, it does have the wiper and so far no issues!

Just the weatherstrip/trim

No it doesn’t touch anywhere else and yes you definitely could do that

HI Did you manage to trim around the intrusion bar brackets and if so how did you seal around.Also is this windscreen compatable with the aluminium sport roof?...Is there another video to demostrate.I,m Keen to order and install one on my X3 but still like to keep my intrusion bars one.Kindly advise

@@dezgovindasamy6145 it’ll fit with intrusion bars and aluminium roof.

I wanted to and thought I had but double clicked the camera so only got 2 seconds lol

Yes it really would

They offer one for it!

@@mzwak2001 they do for the power flip one now??

@@RustbeltMechanic dont listen to him!!!! You can not put a wiper on a poly windshield it will destroy it in one day. You can only use a wiper on glass. You would have so many scratches on that it wouldn’t be funny.

Please check the Can Am website it’s listed as an option.

Very nice 👍🏻

I understand you man, but it’s not ever gonna be ALL tools and shop talk. Yes a lot of it will be, but I’m ALWAYS gonna have a project vehicle and such... this is the current project

@@RustbeltMechanic I get that, but 2 things, 1 it's not even a car, like side hustle, project cars, or a build even makes sense. 2 you have done lots of videos about it lately, not much else. On a far lessrelevant note I think side by sides are the Subaru and vape mod of the woods, and can am? Really? There such garbage.. Mho.. Just hoping to fix the ratio and get the content the kid and I miss..