I just ran into the same issue you did. Unit is not turning on and I’m getting the red led instead of the green one. I’m going to reach out to Victor in support for help. Thanks for the install video bud!!
@VictorVectorJKU3 жыл бұрын
Thank you J! Dang that is a bummer, fortunately seeing my issue helped you diagnose yours! And yeah their support is very good to work with, hopefully they get the new unit to you quick so you can get up and running! I am glad my video was able to help you out!
@blackdiamondrob2 жыл бұрын
i didnt read all the comments here but i just got the JK100 for the jk and it comes with the digital panel that comes off that nasty footmans loop box...in other words it is the exact kit you have for the JL except the mount for the under hood module is made for the jk.. i think i will be making a video on that since there arent very many out there. also i noticed yours came with 40 amp relays, mine came with all 30s
@VictorVectorJKU2 жыл бұрын
Nice! And yeah they didn’t have the JK100 when I was doing my install last year but it’s nice that VoSwitch made one to match for the JK! And good deal, I’d be interested in checking that out when you get it uploaded! Thanks for checking out my video mofo_rob!
@White.Elemant3 жыл бұрын
Great videos, you need to get more subscribers mate, ppl are missing out good stuff!
@VictorVectorJKU3 жыл бұрын
Hey Juri, thanks a lot bud! I really appreciate that!
@Georgia4Low4 жыл бұрын
Wish I had went this route, I went cheap and built all my harnesses with relays and fuses for all my lights. I'm hear to tell you it took me forever, turned out great just time consuming.
@VictorVectorJKU4 жыл бұрын
Yeah I wouldn’t have minded making my own but having the programmable option was desirable for me. But awesome that you made it yourself!
@Georgia4Low4 жыл бұрын
@VictorVectorJKU I won’t do it again!! lol
@VictorVectorJKU4 жыл бұрын
Did you meant “won’t” do it again?
@Georgia4Low4 жыл бұрын
VictorVectorJKU yes lol, edit it. Thanks
@usarmyalaskanick4 жыл бұрын
Awesome tutorial dude.
@VictorVectorJKU4 жыл бұрын
Thank you Overlanding11B!
@johnhollis25654 жыл бұрын
How did you mount the switch to your vector bar?
@VictorVectorJKU4 жыл бұрын
I used the RAM® Tough-Claw™ Small Clamp Base with Ball in the B-size (www.rammount.com/part/RAP-B-400U) to clamp to the Vector JKE Dock. The VoSwitch switch panel came with a like sized ball on the back of it and a similar medium length double socket arm.
@lovablepersona50003 жыл бұрын
Why do you not have anything mounted to you vector bar?
@VictorVectorJKU3 жыл бұрын
I didn’t have anything to mount at the time nor did I have the ram mounts that I do now. Currently I have the VoSwitch panel mounted to the extreme left, a phone mount left of center and a camera mount right of center!
@lovablepersona50003 жыл бұрын
Gotcha. I was confused. I thought you worked for vector off-road. I was like you should have that thing full!
@VictorVectorJKU3 жыл бұрын
Yeah I guess my account name could be a little deceiving! 😅 I am just an individual out here building my Jeep! But yeah I need to get a video up about my interior, I have had a number of requests via Instagram for it.
@brianbills15853 жыл бұрын
Hey man, great video!!! Just ordered one of these. Quick question, if you don't use the ACC wire to turn the unit on and off with the key and just have it "on" all the time, will pressing the middle "power" button on the switch panel kill power to the unit or just the switch? Hopefully that makes sense. Just want to be able to turn on accessories without the jeep being on but don't want a parasitic draw. Thanks again man!
@VictorVectorJKU3 жыл бұрын
Hey thanks a lot Brian, and also thanks for checking out my video! Yes I think I understand your question, so if you elect to not use the ACC to switch the unit on and off with the key then yes you would have to use the power button in the center. When you hit that button it will turn off all of the accessories wired through the VoSwitch. Now you will need to turn the unit off when you turn off your vehicle otherwise the backlighting will remain on even if all of your accessories are off. To speak of the parasitic load however, I am not sure how much it draws but I know there must been some very small amount due to a small LED in the box. So far I have not had any issues with my Jeep not starting with this unit installed tho. I hope that I answered your question, if not let me know! Also if you have any other questions feel free to reach out again! Thanks again for checking out my video Brian!
@JT4R__3 жыл бұрын
Hey what’s up man so I got the voswitch and I noticed that I have only 3 strobe settings while others have 6 so I was wondering maybe you can help me figure that out
@VictorVectorJKU3 жыл бұрын
Hey there JCR, thanks for checking out my video! So I am curious if they have 6 strobe settings with the VoSwitch or if it is 6 settings? I believe I have 3 strobe settings slow, medium, and fast. Then I have a SOS strobe along with a momentary switch and a typical switch making the total of 6 settings. I hope this helps, if not comment back and I can see if I can be of more assistance!
@be.exploring3 жыл бұрын
Does that green led indicator light on the board remain lit at all times, ignition key on or off? And if so do you notice any power draw issues if the jeep isn't started for a while?
@VictorVectorJKU3 жыл бұрын
Hey thanks for checking out my video Brandon! Yes the green indicator light remain on all the time, it indicates power to the VoSwitch unit. I have not had issues with start up due to battery draw. Keep in mind this is a single LED and the output/draw is negligible. I expect if you were to have issues, the battery or some other system would be at fault.
@farsleytex35374 жыл бұрын
Hi Victor 🖐 so would you say the only reason it's sold for the JL rather than JK is switch pod mounting bracket? Their Facebook site says a JK100 is coming out soon but as I have a RHD diesel CRD, the mounting bracket won't be correct for me on the JL100 or JK100 I would guess.
@VictorVectorJKU4 жыл бұрын
Hey there Farsley Tex! So the JL100 is specific for the JL in two ways, first is the mounting bracket under the hood is designed for the JL fender structure but I showed how to add a hole to make it work with the JK. The second like you stated is the bezel for the top of the dash. There is a JK version but it is just a rocker style switch which I didn’t care for as much as the programmable controller. I am not sure about the future offerings of from VoSwitch but if they are developing a JK version of the programmable controller that is great! Otherwise to know if you could make it work in your Jeep I would need to know if it is a JK or a JL? I am curious if you would be able to in mount the bracket from the control unit and mount it at 180 degrees to allow the bracket to mount on the RH side versus the LH with the LH drive. I can provide you with an email if you would like to share some photos with me if your engine bay and we can evaluate the feasibility to make it work if you are interested!
@GilBal53 жыл бұрын
Hello Victor, How do you keep your engine bay so clean? I need to clean mine 😵💫
@GilBal53 жыл бұрын
The Voswitch I-ordered arrives tomorrow 😂
@VictorVectorJKU3 жыл бұрын
So when I recorded this video my jeep was only a matter of months old from when I purchased it from the used car dealer. It is much dirtier now! And awesome! I hope that my video makes your install easy!
@GilBal53 жыл бұрын
Thanks Victor, I am sure this video and others I have seen from you will help me with this install and other mods I am working on ! Keep it up! You are doing great videos and will keep following you. Thanks
@VictorVectorJKU3 жыл бұрын
I really appreciate it Gilberto! Best of luck to you on ur build! Let me know if you have any questions that come up during your install!
@onemorep63 жыл бұрын
Exactly what I want to do to my jku, been waiting for the jku version, but waiting no more. How do you plan to mount the switch panel? Thanks
@VictorVectorJKU3 жыл бұрын
Thanks for checking out my video! So I purchased the JKE Dock by Vector Offroad and I am using a ram ball mount between the JKE Dock and the switch panel.
@timweaver83964 жыл бұрын
Hi Victor!👋🏻
@VictorVectorJKU4 жыл бұрын
Hi Tim!
@JT4R__3 жыл бұрын
Could I still use this for my Toyota 4Runner even though it’s meant for Jeep’s ?
@VictorVectorJKU3 жыл бұрын
Yes! The only item that makes this system Jeep specific is the mounting bracket so you will have to either modify it or create a new one to mount it where you want it. I think they also have generic kits as well but I am not sure what the cost difference is.
@JT4R__3 жыл бұрын
@@VictorVectorJKU okay thanks for the quick response !! I had to ask because the universal one day unavailable on amazon