Can This Fit Inside? MPG GUNGNIR 110R Build

Рет қаралды 142,499

Күн бұрын

In todays video, I wanted to change things up a little. MSI has offered us to do a PC build with their new case and AIO cooler plus motherboard.
Amazon link USA to MSI MAG CoreLiquid 360 AIO (PAID): amzn.to/3lXIxqT
Amazon link USA to MPG-GUNGNIR-110R (PAID): amzn.to/3fEztos
Amazon link USA to MSI MAG B550 TOMAHAWK: amzn.to/3fEPv1E
Amazon link CAD to MSI MAG CoreLiquid 360 (PAID): amzn.to/3dOV8cI
Amazon link CAD to MPG-GUNGNIR-110R (PAID):amzn.to/3mgHAKb
Amazon link CAD to MSI MAG B550 TOMAHAWK(PAID):amzn.to/2Jnw4y1
More Reviews: www.realhardwarereviews.com/
Facebook: / realhardwarereviews
Twitter: / real_hardware
Discord: / discord
Check out our channel at: / realhardwarereviews
Be a Patron on our Patreon where we run Patreon only giveaways and more: / realhardwarereviews
Music: www.epidemicsound.com

Пікірлер: 389

@aryans4519 3 жыл бұрын

Thank you so much brother. I've the same case and I didn't know that we could actually remove the front case and mesh. It really helped me a lot for cleaning the dust. You earned a sub👍

@Realhardwarereviews 3 жыл бұрын

Glad I could help

@zk-55 2 жыл бұрын

This case is really nicely laid out and clean cable runs can be easily achieved. Haven’t built a computer in over 10 years and things have come a long way. I wasn’t too keen on getting tempered glass RGB anything, but cost/ performance balance kept narrowing my selections down to this style as it’s the most common available.

@Petee 2 жыл бұрын

Niceeeee!! I just have a 240 cooler on mine. You're right about the front with the little air intake so I just leave front cover off and have the front filter in.

@ttattx Жыл бұрын

I got this case in a MSI prebuilt Aegis ZS ... the 120AIO busted after 8 mo. of very light use - CPU hitting 100c - so sent in to MSI for RMA... I am happy to have found this, because I was thinking to not re install whatever they send me, and instead put a 360 up front, but never seen it done, with my case - so thank you for this vid!

@the1umberjack13 Жыл бұрын

Thank you so much for this video it helped me since this is the almost exact build of mine except the motherboard and gpu

@DCandtheInsectobytez Жыл бұрын

Alright Dave, your video sold me on this. I will buy this case and have a look!

@cakedon Жыл бұрын

I love the look of the white Gungnir. Thanks for the video.

@DavidJung03 3 жыл бұрын

Thanks for showing me that the HDD caddy can be moved over. I was pretty miffed when the Corsair H110i 240mm radiator didn't fit on the top or the front before the caddy was moved.

@Realhardwarereviews 3 жыл бұрын

Glad I could help

@tensaixp 2 жыл бұрын

Were you able to get the 240mm radiator on the top? I am thinking of getting this case and mounting my current H100i on the top.

@Drumaier Жыл бұрын

Oh, what a nice touch, pointing the camera elsewhere while removing the front panel, exactly what I want to check out.

@Realhardwarereviews Жыл бұрын

I'll make sure to not point up next time! Mistakes were made.

@ttattx Жыл бұрын

Just pull. It will just un seat. I am sure by now tho, you've firgured it out?

@ArtGarcia1880 2 жыл бұрын

Looks like you have one (daisy chain) cable plugged in to your gpu... You'll want to use two separate cables so you don't grin into power issues or start a fire if you have a higher power gpu.

@ttattx Жыл бұрын

adding, that the vented version of the front grill is a must... air flow is nearly non existent with the glass - I swapped mine immediately

@districtverifiedyt7581 3 жыл бұрын

Just bought this case, but I have the 240mm aio and 550m mortar. But thanks for the video brother.

@920ka3 3 жыл бұрын

كل زق

@newzer8382 3 жыл бұрын

thinking about buying the 240mm aio. Does it fit in your case in the top or the side?

@920ka3 3 жыл бұрын

@@newzer8382 he fit in the top

@blakerichardson8778 3 жыл бұрын

How do you take the bottom dust filter off

@stat1stick Жыл бұрын

I'm wondering if you could take the glass panel out and have some holes cut in it. Maybe just some nicely placed vent slots. I don't know how to do this or how much it would cost to have done but I intend to look into it.

@baragionnaugri 2 жыл бұрын

Hi there! You helped me a lot with vid! Thx!! I would like to know if you could tell me if and/or when we would need to connect both of the two PSU connectors on the x570 Unify motherboard?? And which power supply would be able to do that. Cheers!

@DeWellstein 2 жыл бұрын

Hi I am currently building a similar setup. I was wondering, do you need additional spacers in the case ATX screwing positions for the motherboard or are the integrated spacers sufficent?

@IMPRTNS 9 ай бұрын

The spacer are enough, I have the same case

@kentwood2914 3 жыл бұрын

Good video. Can you comment on whether you could/should have chosen to flip the radiator so that the lines run down to the bottom of the case. Would something prevent that orientation?

@Realhardwarereviews 3 жыл бұрын

There wouldn't be enough space for that sadly.

@farb2009 2 жыл бұрын

Hi David, thank you very much for making this video, I'm not sure if you mentioned how to or where to plug the USB type C connector, mine has a "MSI MPG X570 GAMING EDGE WIFI Motherboard"

@eliseohernandez6378 2 жыл бұрын

thank you for learning how to build msi i am make sure for you :)

@Realhardwarereviews Жыл бұрын

No problem!

@charlesnorris2993 3 жыл бұрын

love how there case fans that came with the tower was all set to exhaust.

@Realhardwarereviews 3 жыл бұрын

Hmm are they? :D

@charlesnorris2993 3 жыл бұрын

@@Realhardwarereviews watch 1st part of the vod, you'll see the face of the fans are on the inside.. meaning they was in exhaust lol and so was the back case fan, but once you put the rad in you fixed that.. alot of company's are doing this now days. friend of my got a new pre built.. has 2 fans on the MB side.. there exhaust.. the rear fan si exhaust .. i was like dude.. swap them or add 2 intakes to the top lol

@charlesnorris2993 3 жыл бұрын

@@Realhardwarereviews go to 5.01 in the vod.. you can see them

@ChillzAus 3 жыл бұрын

I’d really like to know what the temps were like with having your aio mounted at the front of the case and not the top I want to mount mine to the front but was a bit worried about air flow

@Realhardwarereviews 3 жыл бұрын

Wish I keept a record of the temps but I seem to have lost them. Sadly, I no longer have the case :(

@fourstringsamurai5616 2 жыл бұрын

How did you get the caddy over there? The wires coming out of power supply are preventing the caddy from moving far enough...

@JohevanPeralta 3 жыл бұрын

Did you use the build-in fans with the AIO or did you unmount the build-in fans and and mounted the AIO's fans?

@Realhardwarereviews 3 жыл бұрын

I used the AIO fans that came with the cooler.

@RmX. 3 ай бұрын

Wonder if 280mm radiator fits on top from Arctic. MSI states on their site max 240mm radiator or 280mm fans. But it looks like it would fit

@-Tac0caT- 3 жыл бұрын

I am mid process of an install with this case. The pwr for the 3 front fans works with the daisy chain. What did you do with the rear fan pwr, just plug into a header on the mb? I don't see how it is linked with the front 3 (if that is even a thing). Next (and related), I have a CM 212 rbg cooler. The pwr connects to the cpu fan. But where do you put the rgb cable? Does it somehow connect to the rgb controller of the case? There is an extra pin on it, I think. I have an argb on the mobo (Asus Tuf gaming pro 570x wifi 6), which I assume the case argb controller goes into. If I plug in the cm212 rgb into the mobo regular rgb, it won't be controlled with the case fans, right?

@slipstream4572 Жыл бұрын

not sure if you want to have liquid cooling pipes at the top of your radiator? where air in the system can limit how effective they works and the noise? I would move fans from behind dust filter to infront of case, and have the radiator flipped with pipes at bottom

@robertlange2385 3 жыл бұрын

Is there enough space for a 240R in the top of the case instead of the 360R in the front? This was my idea for the build.. I would also go with the 100M, the Mesh-Version of the case.

@Realhardwarereviews 3 жыл бұрын

Great choice with the Mesh-Version. A 240R should fit nicely on top.

@shivambatra7747 Жыл бұрын

Only problem with the case is the intake at the front but that can be resolved by just taking off the front plastic bit, and leave the dust panel in

@ttattx Жыл бұрын

I actually bought the other grill design in where in place of the glass, it's a steel mesh screen.... changed temps on stock config by significant amount.

@derekhu9451 3 жыл бұрын

Good job! I was wondering how to take the front panel off the entire time I had the case. Glad my question was answered and I managed to clean the front panel dust filter before it clogged up. On a side note that might not be relevant to others, an Intel Core i9-10940X cooled by an MSI MAG CoreLiquid 240R in the Gungnir 110R maxes out at 80 degrees Celsius when clocked to 4.1 GHz on all cores while running Cinebench R23. I tried it myself, and as I first-time overclocker, I was scared that something would blow, but everything was alright. :)

@Realhardwarereviews 3 жыл бұрын

I’m glad that I could help with the video. Front panels can be a bit tricky to pull off.

@endlessfart3374 11 ай бұрын

My question is if u have a gpu 320mm while this case has 340mm space for gpu, does it still fit if u put this liquid cooler radiator in front?

@gutsthestruggler3052 2 жыл бұрын

Great video 👍👍 can you turn off RGB lights ?

@JR-wn8cl 3 жыл бұрын

How did you get your rgb lights to work ? I got everything but that little header you have. I got the rgb 1 to 3 splitter and also got a cpu fan 1 to 3 splitter too. I have a msi b550m pro mother board with a rainbowrgb 3 pin port and a jrgb 12v 4pin port and none the fans led lights turns on.

@jamesreid-lourie5636 3 жыл бұрын

love my case :)

@warmachine6988 3 жыл бұрын

I love mine too :)

@brianveltri 3 жыл бұрын

Hi, thank you for the video. Do I need to swap the pre-installed front fans with the fans that came with my MSI 360 radiator? They look to be nearly the same fans.

@Realhardwarereviews 3 жыл бұрын

I did mainly because the AIO fans usually are a bit more beefier. I think they can spin at a faster rate but don't quote me on it haha.

@brianveltri 3 жыл бұрын

@@Realhardwarereviews Got it. Thank you

@SLO_MZ3 3 жыл бұрын

@@brianveltri then you have one spare and two fans up top for exaghst

@Jj-yw4mw Жыл бұрын

@Brian Veltri hey, did you manage to fit your 360 in the front in the end? Tysm

@pilot-vp1 Жыл бұрын

I have this case with the stock fans. Is there anyway to control the rear exhaust fan as its always running full blast and it doesnt appear in the bios or anywhere ?

@footm78 Жыл бұрын

Thanks

@MrMatt0329 Жыл бұрын

Can you tell me how to take off the front panel for this case? I've had it for months and have no clue how to take it off as this was a bought build. If you could give some advice on how to also clean the back filter too that would be great. Thanks!

@ttattx Жыл бұрын

just pull, hold top and pull on bottom edge... it will unseat.

@seanleastria4478 2 жыл бұрын

Thanks thumbs up. Will the dual-120 water cooler fit at the top?

@ttattx Жыл бұрын

nope, 8 holes in all - so you can got 2 sizes, but only 2 fans

@manuelquez 2 жыл бұрын

It says can only support up top 240mm radiator on top, but it also has the holes for a 280mm as well, would check if can be supported?

@soravs5496 3 жыл бұрын

I am planning to buy msi 360r with this case, can the tubes reach the cpu when you rotate it and have tubes reaching from bottom?

@JAE-yq3bz 3 жыл бұрын

Hey man how did u plug your argb fans? I am using the same case and I cant control the rgb lighting.. only the pump, gpu, ram are in-sync. I would appreciate a reply. Thanks

@Realhardwarereviews 3 жыл бұрын

Hey Jae, sorry for the late reply. You should be able to control it once you plug it in the fan controller header in the back of the case. Keep me posted.

@SakkiDuran 13 күн бұрын

did you case came with all the screws? My mobo needs 9 but the case came only with 6...

@rick3y_bobby 2 жыл бұрын

Hey. So I have this case. And bought the arctic freezer ii 360. Not sure if it will fit can you give some insight?

@altonfernandes4957 3 жыл бұрын

Did you connect the usb type-C to the motherboard header pin???

@sakuraimizuki559 3 жыл бұрын

Did I only get 3 pin fan strips and the adapter is 4 pin? I really am afraid of this cables. I managed to connect these two but it doesnt seem to me to be the right way so i didnt turn the pc on.

@darronandrews777 Жыл бұрын

hnm....the 3 fans in front are on backwards there...they are set as exhaust instead of intake....seems like its set up as negetive pressure instead of intake from the front and out the back

@renzopostma5108 11 ай бұрын

wait how did you set up the rgb cause i can only have 2 fans light up and i have the same case and motherboard

@benitojimenez8730 3 жыл бұрын

How important is that AIO cooler? The thing is, i'm planning on building my first PC that consists of the same graphics card (MSI GeForce RTX 2070), CPU (Ryzen 5 3600), and motherboard (b550 Tomahawk), and wondering if these components really require an AIO cooler. Your advice is much appreciated. Thank you. I've also taken on your recommendation of grabbing the same case but with the mesh in front. Thanks.

@Realhardwarereviews 3 жыл бұрын

You really don't need an AIO unless your looking into overclocking the CPU. Even then its not worth the hassle. A regular air cooler would still work. It all depends on what you think is the best for aesthetics as well.

@bfredd3333 3 жыл бұрын

With a ryzen 5 you can use the cooler it comes with

@2006palabras 2 жыл бұрын

@@bfredd3333 No, the stock cooler doesn't worth it. I've changed it in two months because temperatures were so high.

@richardatanasov8575 2 жыл бұрын

I have the same case and stock cooler of Ryzen 5 5600x is not enough. Im actually getting the same cooler as in the video tomorrow. :)

@marcandrevienneau1319 3 жыл бұрын

can you show me how you wire set up im having a hard time with the wire

@derekhu9451 3 жыл бұрын

I'm not the best at explaining, but here's a video from JayzTwoCents that really helped me out! kzfaq.info/get/bejne/mZmUmsqf0Mepo2w.html

@matiasbarrios3247 3 жыл бұрын

WTF I was thinking of getting the same build haha. Dude a question, will there be much difference in temperatures if I put a msi coreliquid 240mm AIO? I was thinking of putting the 360mm but I like the way the 240mm looks on the top of the cabinet better.... What do you recommend me to do..? nice video :)

@Realhardwarereviews 3 жыл бұрын

Thank you Matiaz! If your planning to overclock your CPU then get the 360 AIO. If not the 240 is plenty. Plus with the 240 you wont be constrained with your GPU since mounting it on the front of the case robs you of some space for your GPU to be mounted.

@matiasbarrios3247 3 жыл бұрын

@@Realhardwarereviews Ok thank you very much, I was thinking of putting a RTX 3090 on it which are very big and I was hesitating with the AIO and the cabinet. Really, thank you very much for the help!

@navarrete710 3 жыл бұрын

@@matiasbarrios3247 i was planning to buy the 240 aswell does it fit properly at the top of the case?

@val_kyo 2 жыл бұрын

Hello! I am building with similar hardware like the gungnir 110r, MSI AIO, and MSI MOBO. I don't really understand the wiring with the RGB, Pumps, Etc.)

@reviewforthetube6485 2 жыл бұрын

Can I ask why you did the aio on the side?

@Will-cr4fh 2 жыл бұрын

500w with a 2070 and a ryzen 5 you should consider upgrading the power supply

@potatochobit 2 жыл бұрын

Are you blowing water cooler air into the case?

@baragionnaugri 2 жыл бұрын

Hi! another question. I am really having a hard time getting the little button for switching the RGB Fans to work! I am going crazy with this one. What I did is, I installed the fans of the AIO on the Radiator, and the Fans that were in the MSI Gungnir 110M in the Top and rear of the case. I can control the Cooler Fans with the MSI Software, but I do NOT know how to connect the Chasis Fans of the MSI Gungnir 110M so that the button on the case would switch the colors. Can you give me guidance how to do it, so that the button finally wokrs? How did you do it? Thank you in advance!

@dans4125 2 жыл бұрын

I'm going to assume you didn't plug the rainbow1 connector to the board or sata power to the front of the case

@luismachado7714 2 жыл бұрын

Hi. This case have 4 fans, and 1 fan spliter of 3 slots. This means that my motherboard shoud have 2 fan conectors? Or am i missing something? It my first case of this type.

@STOEmma 3 жыл бұрын

I'm looking at building my first PC and looking at putting an RTX 3070 and Ryzen 7 5800X in it (once they're in stock again, won't pay scalper prices) with a top mounted 240mm aio for the CPU, how bad (or maybe good) would this case be? I prefer the tempered glass look at the front over the mesh, but I know the thermals are going to be more important. And if not this case, is there a case you would recommend for a first time PC builder? Sorry for the bombardment of questions, first time finding your channel and I enjoyed the video

@Realhardwarereviews 3 жыл бұрын

The case is great but I would watch out on the size of your graphics card. I found that fitting a 360 AIO plus a larger graphics card that I had wouldn’t fit in. In your case you should be good putting the AIO on top.

@STOEmma 3 жыл бұрын

@@Realhardwarereviews Thank you for the help! Since it's my first build, I really want to get it right and you helped put my mind at ease a little bit in terms of the combo I'm going for.

@StardustCrusad3r 2 жыл бұрын

@@STOEmma im buying my 1st pc soon, and im also using an RTX 3070, Ryzen 7 5600x, as well as a top mounted 240 aio cooler, how did your build come out for you? any issues? how was cooling with the glass front?

@STOEmma 2 жыл бұрын

@@StardustCrusad3r The only issue I had was that the pump in the aio I chose failed. I've got a temporary air cooler while I find a more reliable aio, and I have no thermal issues. I did change the parts, due to availability at the time, I've got a RX 6700 XT and a Ryzen 9 5900x

@StardustCrusad3r 2 жыл бұрын

@@STOEmma how long did the pump live before failure? which brand/model did you have?

@willmorrell291 2 жыл бұрын

Where did you connect the led switch lead to on the MB?

@elisamdam 2 жыл бұрын

I just mounted the computer with this box but I can't get the LED button to work. Any suggestions?? Thank you

@742Timbox 10 ай бұрын

You put that together almost opposite from the way I would do 😊🤭

@-Tac0caT- 3 жыл бұрын

You suggested that air is restricted by the front panel. Curious if you could confirm it. Run tests as is, then without the front panel on. Then we would know.

@Realhardwarereviews 3 жыл бұрын

Wish I still had the case. Sadly it was a loaner. I would have confirmed it with you otherwise.

@bobthecooldad 3 жыл бұрын

I have unscrewed the metal side and the temps dropped by 3 degrees and the fans stopped struggling. (5900x + x62 Kraken), Would be better if they did a mesh side for it as a replacement.

@-Tac0caT- 3 жыл бұрын

@@bobthecooldadInteresting. my 5600x and rtx 2070 super hasn't caused the temps to get into the 70s (60s only). I haven't done stress testing beyond OC of memory and cpu. As long as the fans aren't audible, which they aren't, I don't really care.

@areyoumadbroxd6861 3 жыл бұрын

So why didn’t you mount the water cooler on the top? It would look better than on the side that way you can see all the fans and have even more of them.

@Realhardwarereviews 3 жыл бұрын

Sadly it doesnt fit on the top. You can only fit a 240 AIO on top.

@ghostpy7280 2 жыл бұрын

Does the ASUS ROG Strix B550-F Gaming (WiFi 6) motherboard also fit inside this case?

@luismachado7714 2 жыл бұрын

Hi..do you know if i could install a Triton 240 cooling system of Antryx in the top of this case?. Y have a msi b460 mortar mainboard. I was reading that is impossible because collides with the ram. Thanks.

@channels740 Жыл бұрын

Not sure why the front fans were mounted to exhaust rather than pull in fresh air through the intake filter.

@2senz Жыл бұрын

Will this case support vertical gpu mount?

@danielmora3843 3 жыл бұрын

Did the case come with the front three fans installed as exhausts??

@MrHdradeon Жыл бұрын

They are intake, hot air to the inside. I though he was going to flip them around.

@Encyledus Жыл бұрын

If I install an AIO on top would that be better for cooling the pc, along with all of the fans included?

@ttattx Жыл бұрын

I just watched a video on that - and it seems for GPU fan/rad placement don't matter (if open air GPU) but in the experiment, it showed marked difference in CPU temps (10c cooler with front mount rad) which make since pulling in ambient air and opposed to eating already hot air when up top.

@vldude93 2 жыл бұрын

Do you think I could fit a 3090 and a 360mm AIO

@fredyssantosortega5914 3 жыл бұрын

Thanks for the video, a 290 mm GPU would fit perfectly then? Got and x570 mobo, 240mm fan and planning on getting 3060ti aorus master which is 290mm as I read in the comments the msi gaming trio won't fit :(

@warmachine6988 3 жыл бұрын

Yeah I have this excact case with a msi rtx3060ti triple fan it fits perfectly, you just can't have the front AIO in then, I use a top one

@tate7610 3 жыл бұрын

Nice video! But how does it sound? Is it Quiet?

@Realhardwarereviews 3 жыл бұрын

Yup, its silent. You can always adjust your fan curves if you want it to be whisper quiet.

@tate7610 3 жыл бұрын

Thanks!

@bearmanroar7117 Жыл бұрын

Dang does the MSI rtx 3090 ti suprim graphics card fit in this case with a radiator in the front of the case? It seems tight

@Realhardwarereviews Жыл бұрын

That card is hefty. It wouldnt fit in this case.

@kentwood2914 3 жыл бұрын

Are you sure the front fans are starved or just assuming so. Without calculating the fan cfm and the slots/vents allowable of cfm etc, how can you state the fans will be starved of air?

@Realhardwarereviews 3 жыл бұрын

Simple physics. Having more vent holes will increase airflow.

@ukaszgasek3132 Жыл бұрын

Hi. Is it possible to install core mag liquid 280r on the front ?

@andreapelegrin 3 жыл бұрын

How do you connect the cooler in frontal panel, i can connect the aio fans with the radiator(sorry my bad english)

@Realhardwarereviews 3 жыл бұрын

You should be able to connect it to the fan controller at the back of the case.

@KlNGSNEVERDlE 2 жыл бұрын

The radiator blows hot air into the case :D

@MrHdradeon Жыл бұрын

In was wondering the same, I have the same case with the same cooler but 240mm on top and the fans are blowing air up top, not like this.

@tywo7879 3 жыл бұрын

Are the pre-installed fans pwm? If so, I'm sold on this one

@Realhardwarereviews 3 жыл бұрын

Let me check with MSI. I sadly dont have the case anymore.

@bobthecooldad 3 жыл бұрын

All Fans Included are DC (3 pins with low control within the msi fan software)

@humbertozamarripa8745 2 жыл бұрын

I just built a computer using this case and yes, airflow is an issue. The cpu gets up to 80 Celsius. I think the problem is the front panel, I’m gonna remove it and see how it works.

@wg69 2 жыл бұрын

No It’s your cooler, it’s probably garbage as mine with the stock cooler was 60-70c while over clocked but I switched it with an aio

@Galedan-C1029 2 жыл бұрын

I've never had air flow issues with this case

@user-qp1bt8ny8u 2 жыл бұрын

There are 4 fans 3 front 1 back. Where the back fan can go?

@benitojimenez8730 3 жыл бұрын

Whats the hybrid button on the back?

@sathishchinthana 2 жыл бұрын

is their any space in upper to have 240mm cpu cooler

@haroldlopez3821 2 жыл бұрын

Can cpu air cooler ( Noctua NH-D15 Chromax.Black) will fit in that case?

@Somethingelse506 3 жыл бұрын

Can you control the built in fans with a program ? And not the button

@manpreetsandhu8933 3 жыл бұрын

Yes

@ibrahims949 Жыл бұрын

I have gungnir 110r and 3070ti suprim x the graphics card is literally huge can 360r fit in this case

@facundex54 2 жыл бұрын

will this fit an ROG thor 850w Platinum with the hdd cage on?

@mr.wooper6605 Жыл бұрын

With corsair vengeance pro rgb, does is fit a radiator on the top?

@pauls.5815 2 жыл бұрын

Could you not have put the extra fans up top as an exhaust? Just a thought.

@ttattx Жыл бұрын

I know he mentioned it, so maybe just didn't include that in the vid? I am planning to modify my MSI pre build that has this case, and do exactly that - replace sucky 120 rear aio for another brand 360 up front, and use the case fans wherever I can...

@jonathanelbers9943 3 жыл бұрын

Am i able to change the RGB colours of the fans in other pc cases ?

@Realhardwarereviews 3 жыл бұрын

You can. Shouldnt be a problem.

@-kr1su 2 жыл бұрын

Would you say this case is enough for a Ryzen 5 5600X and MSI GeForce RTX 3060 Ti GAMING X? I’m looking to build a full MSI build.

@Realhardwarereviews Жыл бұрын

Yes, hopefully you already built your pc by now :)

@-kr1su Жыл бұрын

@@Realhardwarereviews I actually got a Ryzen 5 5600 not the X because it’s basically same performance when overclocked a bit (and i saved like 50€ by going for the non-X). I have not bought the graphics card yet tho since the prices went going down so i decided to wait. I have a MSI GeForce GTX 1060 6GB Gaming X for now (got it for cheap from my friend) but soon i am going to get a 3060 or a 3060 Ti. For motherboard i chose the MSI MAG B550 TOMAHAWK and for my CPU cooler i got a MSI MAG Coreliquid 240R V2.

@whoisjoe8555 3 жыл бұрын

Will I have any problems with my specs: GIGABYTE GeForce RTX 3070 VISION OC 8G GDDR6 and ryzen 7 3700x? Not looking forward to overclock cpu or gpu btw

@Realhardwarereviews 3 жыл бұрын

Great specs! I don’t see any issues. Make sure to get fast ram above 3200mhz

@whoisjoe8555 3 жыл бұрын

I have 3600mhz for ram

@Realhardwarereviews 3 жыл бұрын

Your golden

@whoisjoe8555 3 жыл бұрын

Hey one last thing, I am new to building pcs so my brother is doing it for me and he says I need a hard drive. What kind of hard drive do I need for that and what hard drive do you suggest

@Realhardwarereviews 3 жыл бұрын

@@whoisjoe8555 Get a 1tb nvme drive if you can afford it, and a regular HDD for mass storage.

@cadenboles2974 2 жыл бұрын

Wdym when you say “ you can connect the 3 to 1 adapter to the cpu fan”?

@iotaman2178 2 жыл бұрын

11:46 you should REALLY not place your radiator that way : since any air inside will rise to the top, the water has to push through it when getting in, which produces gurgling noises and wears out the material faster. you should place your radiator with the pipe entry at the bottom rather than at the top in order to avoid this :)

@hoodmeister_9076 2 жыл бұрын

Did you look at the case before writing this comment? There is no other way to mount it.

@ashnthree 2 жыл бұрын

that is the best spot yes, but it wont really matter as long as the pump is not higher then then the radiator. If you place where the pipe runs up you would barely notice a difference.

@ashnthree 2 жыл бұрын

just watch greg's video on it

@treverrash2795 5 ай бұрын

My guy the pump is at the bottom

@-shinigami5900 2 жыл бұрын

Nice ^^

@kyamyutsu235 Жыл бұрын

Could the RTX 3070 Ti fit in this case?

@andreshernandez1779 Жыл бұрын

Does that cooler fit with a 3080?

@val_kyo 2 жыл бұрын

How did you remove the legs?

@bradkelly2339 3 жыл бұрын

hi, i was thinking about getting this case, how are the fans are they quite loud ?

@Realhardwarereviews 3 жыл бұрын

Not too noticeable as far loudness goes. Should be fine, but if your planning on overclocking your rig then adjust your fan curves.

@bradkelly2339 3 жыл бұрын

@@Realhardwarereviews nah I just went a better case, I’m using a budget case atm

@mrMamaboy17 3 жыл бұрын

I'm kind of stuck with the RGB controller at the back... I've got the SATA & the front panel button plugged in at the correct spots as well as the 4 fans into 4 of the 6 headers. But I can't figure out where to plug the cable coming from the aRGB header of my MB ? Would really appreciate an answer! Thank you in advance :)

@Realhardwarereviews 3 жыл бұрын

Did you manage to figure it out?

@JAE-yq3bz 3 жыл бұрын

Same issue. Pls help