Mustie, for the love of God, whoever said your videos are getting too long does not speak for the rest of us. It would be awesome to see you do a live video and chat with the audience as you do it. Maybe not a super in-depth repair but something simple.

I really don't mind the longer videos. It's like having an old friend wrenching with you in the shop showing you new tricks. I've learned a lot about both small and automotive engines through this channel.

Best quote of the week, “Brakes are for quitters”. Cracked me up right there!

hey Mustie, don't worry about the length of the video's, just keep them coming, it is like my highlight of the week every sunday, it is relaxing , interesting and inspiring every time.

Mustie, you're the only channel that I can watch a 2 hour video and it doesn't feel long. That's when you know you're good...👍😊

"That why women live longer than men" LOL … The perfect phrase at the perfect moment.

Almost two hours of Mustie? YES!!! One of the highlights of my Sundays!

I appreciate the last 10 minute update! You answered a ton of questions that were none of my business. I spend my Sunday morning watching whatever you put up for inspiration for what I do next. 1 1/2 hours is not too long . It really flies by. Great channel! Great format! Great humor! What a great guy!

Love the longer videos. A cup of tea and a slice of cake, I am in heaven.

When I was very young, my grandmother used to make me go keep my grandfather company down into the basement. I wanted to go fishing, but dragged myself down there and watched him rebuild torches and regulators. The basement was loaded (and many other buildings and properties) with tons of "junk". At the time I would have given just about anything to be outside fishing with my brothers. I miss that time with my grandfather very much, now that I'm 60. Thank you for all you do on this channel. Your way of talking to us while working is genuine. Thanks again

I love how at first you tippee-toed around your grenadeable press spring compression setup and about 30 seconds later you were whacking it with the handle of a mallet. It reminded me of Bugs Bunny checking for duds at the bomb factory.

I stray away from other videos that run long. I have been a mechanic/bodyman all my adult life. I look forward to watching your projects no matter how long they run.

I couldn't add comments on my TV. I've learned so much from watching these videos. Thank you

As someone that designed spring parking brakes and worked in a facility with a dent in the 20ft ceiling, springs require respect.

The socket/ vice grip is like a deadly jack in the box

Can’t believe how good that chain looked. Never would have won that bet.

With the high number of 10mm that go missing everyday across the country. It hurt to hear of a sacrifice

That chain-case should have gear oil in it up to the level hole on the bottom. Boy that engine sound brings some flashbacks.

CONGRATUALTIONS!!! I hereby grant you the Alabama Shady Tree Mechanic Award for creative use of a 2X4 in recreational equipment repair. You'll be replacing Bill Bob Guthry who won last year's award for creative use of low grade explosives in the removal of seized pilot bearings. Your award comes with one month free pass to Sizzler. NO UNLIMITED DESERTS!

The fuel pickup tube can be unscrewed and modified if necessary. (If I remember well) I really enjoy these videos because I faced all the same quirks and traps of my 65 Ski Doo when I was 17-18 yo. That was a great education for me back then. I mean, I practiced swearing a lot.

This episode is the essence of “That’s just stupid enough it might actually work!” lol glad that clutch didn’t kill you!

It looks like those black and green handle Snap-On screwdrivers you scored when you got that VW I think a couple years ago.. they turned out to be life savers in a FEW videos now since you scored those.. nice!!

I remember when I was a kid being stuck in the bush trying to get those engines going. Ah, memories.

LOL….I love the way Mustie was ‘we’….’we’re doing this or that’….and yet ‘we’ are only watching and enjoying….

It's so comforting to see a knowledgeable, talented, experienced mechanic dropping tools and parts just like I do.

Compressing the spring belongs to the group of things that you never should do sober😂

Allis-Chalmers orange used to be called "Persian Orange", I worked for A-C for 17 years and believe I have orange blood!

THE QUALITY of the fasteners of that era is amazing. There's nothing made of fancy stainless steel, it's all "ferrous" mild steel fasteners but the snowmobile isn't fighting you. It is coming apart with relative ease and nothing has snapped or broken off. I've seen this before in older vehicles, but newer stuff is the reverse.

Ski-doo had a special grease for lubricating the clutch shaft. It was graphite based rubbery goo - couldn’t believe it would work but it did

Dennis Kirk has a ton of parts for those old obsolete sleds. I had an old Massey Ferguson years ago they had all the parts i needed to get it going.

Mustie, I can’t believe you did all this with the cowl on!!!

I dig the long videos!! Between you and Taryl, I’ve got almost 3 hours of drinkin coffee and relaxing watching someone else accomplish something. Thanks Mustie!!!

A spring that has coil spacing like that can also be part of its design as a variable rate spring. The more it is compressed, the "stiffer" it will get. Awesome video as always! On another note, some of the the reasons your channel is so popular is that your videos are not heavily edited, there is no Bull$hi!, and you do keep it as real as possible. If the videos are long, I certainly don't care and I'll bet thousands or even tens of thousands of other people don't care either. You can't please everyone every time or all the time. Please keep up the awesome work!

I am literally protecting my face and head while watching you with that spring in the press

A family friend back in the 70's said we could borrow their snow machines if we got em runnin'. Me and my bro worked on em for several days, as you see there's no belt guard, went like a 1/2 mile and had to jump off cuz splodey. cool rig that sux

I grew up riding one of those exact sleds. 67 Olympic and a 69 sno-jet. The snow jet looked better but the olympic was absolutely unstoppable even in snow deeper than the sled itself. I'm REALLY hoping you can save it, it looks like it has good bones.

We had an Olympique 320 of the same vintage, was a great running machine for years, lots of good memories. With a dog sled pulled behind, it took a family of 5 through lots of trails in northern Wi in the Tomahawk area.

Love these vintage sleds. My first was a 73 Yamaha sl338. It’s fun to hear them come back to life. Looking at that rust damaged crank shaft though….cant say I want that spinning between my legs at a 5000 rpm if it lets loose 😳

The cut out on the socket, great idea.

Thanks for the update on your other projects, good to see they are still moving forward. Good to hear your taking better care of your health, I think the more medication you take, the more problems they cause, keep medication down to a minimum. Maybe you just need a camera man to tag along a video as you go so you can work at your own pace without having to move the camera around. Maybe you could make a access panel on the gas tank to clean it out. Have a great day.

My ex-brother in law had the exact same sled, kind of slow but steady engine. Didn’t catch the CC size of the engine, but I think I remember ( it’s been 48 years) it was a single cylinder/250cc engine.🇨🇦👍. P.S.: I’ve been subscribed since there were only 44,000 people enjoying this channel

To hold back the spring on the driven pulley , I would cut a groove in the pulley shaft. You could retain the spring on the shaft with a c-clip similar to a c-clip on a axle shaft. Assemble it, then pull the c-clip to release the spring.

Mustie's wonderful smile at 1:37:11 was the sunshine of my day.

Finally, finally finally Mustie1 said it again “SAFETY THIRD.” After all these many years. I always liked that quip-line. Makes me laugh.

The clutches on those Rotax engines are installed on a threaded crank. So the inner part actually spins off the crank.

Glad to hear that you have gotten a handle on your health. Sometimes the amount of meds that we take is the problem. Once again, great project. Keep up the great work!!!

A friend of mine had this exact machine he got from somebody I couldn't get it to run because of the crank seals back in 1998, I've talked to old guys when I was a kid 25 years ago, they said you can put a heavier spring in your clutch on those and it would make it engage at higher RPMs or a lighter spring would make it engage at lower RPMs for whatever application you wanted, Ski-Doo sold the springs back then.

Mustie is up to his trickery again! Good job 👍

that's great news on the engine for the possible swap.... I forgot how sweet that truck is , nice fab work :)

You kept mentioning Wile E. Coyote while compressing that spring. I was thinking more about Foghorn Leghorn whenever things went wrong: "Fortunately, I keep my feathers numbered for just such an occasion."

Hey Mustie. My Dad bought us a 3 year old '70 SkiDoo 292 TNT. Substantially the same machine as this one. Single cylinder Rotax with the Devil's own Tillotson carb. Recoil starter was junk. Hard to start, sometimes impossible, but when it ran, it ran hard. I would crowd up on the engine and ride it full out on icy road with one hand on the high speed needle, tweaking it for more power. It could make a terrifying 60 MPH. Snowmobiles changed and improved so fast in this era that by 1975 it was a Model T. But much fun was had.

To fit the undersized bearing, run the engine on half throttle and take 20 thousands off the shaft with emery and freeze it with an ice pack for an interference fit ;) I loved this one Mustie1, you always rise to a challenge. Like many commentators, I love your long videos, I'm old enough to not require instant gratification :) Spot on with the doing buzz opposed to having to film everything, that why I took a year off YT. I got so much done with a buzz, LOL.

remind me never to do suspension work with you, especially if we need spring compressors!! methylated spirits (Denatured alcohol for you maybe?) will help that water evaporate from the tank. thanks for all your effort, mate, I really do love your videos!

This is the luckiest dude on the planet, if this had been me taking this thing apart, every nut, bolt and spring would have broke. Cool video.

Really like the long videos!! Mustie, been watching for a few years now, love the videos. I wish there was someway of posting a picture on this comment. In June 2022 I was on a cross country ride on my motorcycle with a buddy. We had to stop at the Honda motorcycle shop in Steamboat Springs Colorado to get my buddies tire fixed. I have a picture of almost the same yellow Skidoo that your working on, it’s on display at the dealer with all there other new ones. Looks almost the same!

I don't mind the long videos either. I'm retired so every day is a Sunday or Saturday, whatever. Sunday is my down day so your videos are fair game. Thank you for the update on the other projects. Keep on wrenching! Cheers Terry

My dad bought us a similar model in 1969..our model's name was Olympic and it was 18 hp. Btw SKI DOO offered three models in 69, Elan 12 hp, Olympic 18hp and TnT 27hp..Thanks I have been enjoying you bringing it back to life.

Darren, glad you're getting a handle with you health concerns. Wife #2 never met a pill that she didn't need. I got her and her doctor to evaluate her needs and she went from about 15 pills to 6 a day. Unfortunately, her health took a turn for the worse, and she required surgery. She finally was on the road to recovery when she contracted covid in the hospital ICU. This Saturday will be 3 years since she passed. Wife #3 got off most of her meds and has never been better. We really have a drug problem in America, and it's not only illegal drugs. Be well, my friend!

Darren's stash is full of bits 😂

Seeing this old machine brings back a lot of memories of the same model Ski Doo we had when I was a kid in the early 70's.

Awesome on the Econoline. Every time I see it in the background, I think how cool it would be to see the restoration go forward.

Mustie and Andrew Camarata I can watch for hours.

The most important thing… take care of yourself. We enjoy new videos but only if you feel like it, only if you can , have the time and strenght for it. If you need a break from filming, you should take it. You have Done soooo many videos, we can survive forever with those… Take care of yourself!!!! Thank you again!!

Mustie, your videos is excellent Sunday afternoon(Where I am on the planet) entertainment. Please dont make them shorter:)

Olympique 340 was a great sled for me and my 5 siblings here in the Adirondacks of Northern NY. We had 3 sleds from 72-85 Allouette K295, Polaris Colt 120, and Skidoo Olympique340. We rode them everywhere including The World Series of Snowmobiling in Boonville,NY was a favorite event.

You're missing the real experience of 60s sledding. This should be done in the middle of a lake at midnight with some blowing snow at -15 F 5 or 10 miles from home. Some of those carbs were like a 5 layer cake. Lots of fun.

Thank You for the update at the end of the video. I understand that it takes longer to film everything. but an update like you did at the end keeps us up to date on the projects.

Thanks for the update, and yes glad you are taking two days a-week to free-wrench.

Some of us remember being a kid and there dad taking them for a ride back in the early 70's. Mustie bring back those memories.

Evapo-rust should donate a drum with dipping basket to your channel. Great stuff!

Was wondering about the truck. Not being inpatient on it, but glad you had an explanation. Its so funny, I pass one exactly like that every day on my commute. And every day I go... Hmmmm wonder if..... Great video and thanks for showing some alternate methods on how to solve problems without taking everything apart. As a sailboat owner I can sympathize.

Hope we see an update on the skidsteer. Been looking for one too, and your videos help with guidance.

33:15 -That was more entertaining than a Japanese Steak House! Love how, no matter what, that pulley was coming oiff, impressive escalation!

You killed me with laughter, when you were loosening the spring on the press with the cut socket & vise grips, " YOU SUCK", damn that chuckle Brother thank you for taking us along for the ride in you Sunday video trip.

Good for Mustie1 for taking time for himself. He deserves it.

Another GREAT job bud. In N.J. we called that 'Chill Shocking', but only on Steel, not Cast Iron. Heat up the exterior material, then cool it down with water to 'shock it'. Worked every time.

Unbelievable patience and persistence- you amaze me!

Happy you decided to push on instead of scrapping the machine and stealing the engine.. i’d love to see this back to full glory!

Love the channel. I would recomend using "Freeze Off" made by CRC for the quench phase of any bolt removal or component. The reason why is the CRC has penetrating oils in the spray, so when it is cooled instantly it pulls the oils into the corroded areas as well as the capillary effect. I have saved many an outboard run in salt water with this technique.

Enjoyed this one. One of your best. Lancashire, England by the way!

Nearly 2 hours,excellent longer the better,watching from australia

That Wile E Coyote line had me laughing hard. Absolutely love that character.

Longer the videos the less the honey do list to complete ..KEEP the long videos coming Darren !!

Mustie, Glad things have improved with regard to the migraines. Also VERY glad for the update on the other projects including the panel work on the wee forward control!

Good morning everyone !!

Usually listen to these at work so longer videos are the best ones

This is why I love this channel. HE CAN MAKE ANYTHING RUN. Next time it's a couch.

The original Skidoo tool kit that came with the sled had a little wrench with a 90 degree bend in it for the carb.

Thanks for the update on the Gia and Econoline. It pays to watch the whole video until the end. Video length is no problem here, it's just a great way to start my Sunday.

Hey appreciate the glimpse into your work /filming routine by mentioning that you are going to take 2 days per week to work WITHOUT filming. I always wondered how much of your work, or how much time, you did film. I assumed the vast majority of your work was NOT filmed! Apparently I was wrong. Totally get the thrill and momentum of working on things as you solve or discover and troubleshoot new obstacles without having to worry about filming, lighting, the angle(s) of the shot(s), audio, etc. Appreciate your time and effort to create content that SO many of us enjoy, look forward to and learn from. It's more invaluable that you, or we, will likely ever know. 🔧👍👍

This is a base “Olympique”. The next model up in 1967 was the “Super Olympique “ with a 300cc Rotax (16 HP) and a removable hood with 4 wing nuts. It also had a triangular fibreglass back rest.

Wow, that driveshaft was as pitted as I've ever seen ! I was almost convinced that clutch was there to stay. I like the long videos, gives me time for 2 coffees while I watch !

Don't worry about the longer videos if it's something I don't want to watch I can always skip ahead but that never seems to happen. 3 of my favorite channels come out Sunday mornings and you're one of them👍 keep them coming your fans will always enjoy.

Ive been watching your channel for 4 or more years. I dont mind the long videos at all. Its the dragging it out and repeating the same thing over and over that makes them seem so long now.

This is my every early Sunday morning. My wife gets up about 3 hours later than me.

Love your videos . Calm voice / accent makes 2 hours fly by . As a kid, I would watch the new Yankee work shop for hours. To be honest, I could give two shits about wood working . It was just his narration and passion for his work that kept me watching. Now, finding you working on mechanical stuff that I really do love it is a perfect fit. Thank you for filming your projects . MATT

The level of problem solving is always worth the price of admission. ! Great content Sir

Wanna see you working on the truck. Miss those videos. Like watching you do metal work.

Fantastic as always you certainly made me chuckle Mustie with the that's why women live longer than men.

I'm here for the sketchy shit... I was not disappointed. 🤣🤣🤣