Canik Mete MC9 - out of battery issue Fixed!!

Рет қаралды 49,232

Жыл бұрын

I am a gunsmith and USPSA Open Master sponsored shooter at a local gun store in Crete, Illinois. My job is to diagnose issues with firearms and make guns reliable. This is what I found with my personal Canik Mete MC9. With my first 4 magazines through the gun, I found five failure to go into battery issues. Upon inspecting it further, I was able to resolve the issue and shoot 500 rounds after that without an issue and here’s what I found. Thank you for watching and let me know if you have any questions. I would love to hear your feedback if it solved your issues.

Пікірлер: 323

@phantom.fusion 3 ай бұрын

I've had the gun for about 3 weeks now as a edc. and I've range fired about 473 rounds so far... not a lot I know but that's 473 rounds with no issues. has always returned to battery and ejected very cleanly and quickly. I think its people who either aren't holding it correctly when firing or honest just got a dud. but I saw all the "issues" with this gun before purchasing and still decided to buy it. and it was a very good decision because the gun has performed amazingly since purchase and about 500 rounds.

@theflair3314 3 күн бұрын

I’ve still got a lot more to learn when it comes to firearms, but what about the grip causes out of battery? I’ve never had a problem with out of battery, but for some reason, I was using snap caps earlier today and the out of battery issues became present.

@normanpersing2475 9 ай бұрын

Update. I used very fine 900grit paper and sanded the polymer top rail so they were even with the metal guides and a couple of quick swipes on the inner side of the extractor. Went to the range and it worked perfectly! Thanks to videos like this that point us in the right direction!

@TheDubinov Ай бұрын

Bro, don’t listen to the annoying ass commenters mentioning “m’kay” or what ever. You went out of your way to provide useful info and I appreciate it. I’m having this issue with my brand new $1000 TTI combat and I tried what you recommended here (except for polish) . I’ll see how it goes at the range tomorrow. Keep up the good work man

@tacticalbert Ай бұрын

Thanks for the support. We’ve had several tti combats come thru my store now. I shoot a lot of compensated guns in competition and you gotta remember to use hotter ammunition to cycle any compensated gun. Break in the gun with some 124nato and that should do the trick.

@Nghthawkk 29 күн бұрын

How did it work out? I am having the same issue with my TTI combat.

@tacticalbert 28 күн бұрын

@@Nghthawkkuse hotter ammo. There’s also another recoil spring in the box. Try that one.

@Nghthawkk 28 күн бұрын

@@tacticalbert The other recoil spring that came with the TTI made the out of battery malfunction happen more frequently. I think the problem is something to do with the extractor.

@geodarkknight27 10 ай бұрын

About time someone came out with a video explaining all this! When people were first getting this firearm and started complaining about ALL of these issues, every KZfaqr was like "I don't have any issues, this gun is awesome!" Yeah, ok. When the gun actually works, it's extremely accurate. Looks like I'll be having my gunsmith fix these issues. Thanks for the video. You get a like and a subscribe from me!

@crabjoe 9 ай бұрын

I hope this fixes everyone's issue, but no consumer should have to take their new gun to a gunsmith nor should they have to fix these issues themselves. Assuming this is the problem, it's a QC issue with Canik and this should have been caught during testing. Most people buy these for self defense. The gun not working properly is a gigantic problem, if it doesn't fire, when it's needed.

@FineEpicArt777 7 ай бұрын

GREAT, great video! I love my Mete and have had NO issues with it but I've been scared about what I have been hearing from others. Nice to see this easy fix that you might be able to DIY if you have these issues.

@MattWooten-lu1by 6 ай бұрын

Fantastic video! Perfectly described and your step by step is flawless. Thanks for fixing my Canik for free with this video!

@1414lildude 11 ай бұрын

couldnt figure out where to start diagnosing the issue so this video helps out TREMENDOUSLY. awesome work man really appreciate the time you took to make this vid.

@jsublett8871 6 ай бұрын

I have as of Dec 8, 1300 rounds through mine. I have had no issues at all. I just do regular maintenance as i do to all my guns.

@tophersadvice 11 ай бұрын

Thanks for the heads up, definitely field striping thr MC9 at the LGS before I pick mine up to inspect the polymer for burs haha

@CyKo176 7 ай бұрын

I’m probably going to do this just in case. Thank you for the video. I saw someone comment a gun smith talked about this fix. I haven’t shot mine yet but definitely going to look. I know people say you shouldn’t have to work on your gun out of the box but honestly if you don’t have a choice and it’s a good gun. I don’t know doesn’t seem like a big deal being that it just requires some love and minor fixing. Thanks again!

@mattbradyfitness 11 күн бұрын

Excellent summary and fix of issue thanks! Subscribed

@dieselawake 2 ай бұрын

Awesome review..very tempted to pick one of these up

@luny_mrg8868 11 ай бұрын

I know it’s only $450 pew pew but we shouldn’t have to modify or “fix” it.

@tacticalbert 11 ай бұрын

100% agreed. We’ve been testing two mc9’s at our store and the other one works perfect. Both have nearly 500-800 rounds now. Mine had issues like many I’ve seen on KZfaq and this was just a quick video to help people learn more about their $450 investment.

@gloriamaletta8667 11 ай бұрын

If you don't own one you won't have to modify it big modification running a fine file over the plastic to remove some plastic burrs that probably happened when the trigger and rail system was installed your right it should have been taken care of at the factory it's a simple fix you don't need to take it to a gunsmith

@tacticalbert 11 ай бұрын

@@gloriamaletta8667 I manage a gun store, and you would not believe the amount of customers we see that won’t even field strip their gun for cleaning. Some people are just afraid of working on their guns.

@gloriamaletta8667 11 ай бұрын

@@tacticalbert l do a basic pistol breakdown of every new gun slide barrel guide rod and frame submerge the parts in 1/2 gallon of mineral spirits mixed with 4 ounces of Marvel Mystery oil solution and scrub everything with a tooth brush scrub barrel with nylon barrel brush the amount of dirt and dark grit is unbelievable from a new gun when finished pour it back into bottle through a funnel with a coffee filter to reuse many times when new it has a pink red color over time it turns brown after 7-8 uses then l discard it and make a fresh batch oil slide rails well and slide rail channels after cleaning l run my guns well oiled even pull slide back to slide catch and oil inner guide rod shaft then work the slide 5-6 times and wipe it down well

@gloriamaletta8667 11 ай бұрын

@@tacticalbert I've ran 300 trouble free round through my Canik MC9 but did check plastic just before slide rails and noticed the plastic on both front rails were slightly higher and the right back side took 15 minutes to file them down even with the metal with a small file then took mothers aluminium polish polished the shit out of slide rail tabs and feed ramp and chamber of barrel it's all slick and extremely smooth to the touch after watching your video and then oiled smooth is always better for guns thanks for the heads up info

@boricuanet6481 Ай бұрын

Greetings. I followed the instructions, wearing down the polymer a little. And my problems are over. Of a hundred bullets, none jammed. Thank you very much for this video.

@jeffmabe4158 6 ай бұрын

Really appreciate this video. I was actually planning to go get this as my new EDC tomorrow morning and was somewhat concerned about some of the issues I’ve been seeing but thanks to your video I’m good to go on it now!

@tacticalbert 6 ай бұрын

Quite honestly, like I’ve said, in other comments, this only happens to a few. And they are few and far in between. These are just reliability checks that I do anyway.

@whathehec 4 ай бұрын

Hey did you ever end up buying it? I’m in the same boat and really hoping the newer versions are good out of the box!

@jetjaguarXP 3 ай бұрын

Excellent sleuthing sir! You are the guy who is good at his job. Canik must have hired the other guy.

@JOSEATJG 2 ай бұрын

Amazingly helpful. Thank you kind sir.

@DougZ73 7 ай бұрын

Great video. My next EDC purchase was going to be between the TP9 Elite SC and the METE MC9. With that said, I saw all of the issues related to the MC9 and was worried about buying it and having issues. The Elite SC is a great gun too, but really really like the small size of the MC9 and the 12/15 capacity of the each, but not the size of the SC. I have a TP9SF, and love it and the trigger on it. And I shoot much better with it, compared to a Taurus G3C I just recently bought for EDC. The Taurus is getting sold and I am going with the MC9. Interestingly enough, this is not the first time I have heard this exact issue, the poly frame behind metal frame rails, being the issue. The timing if seeing this video is also great coming up in my feed, as I am looking to purchase next week, and hoping to get a good Black Friday deal on the MC9. Thanks for making this video.

@tacticalbert 7 ай бұрын

Honestly sometimes the internet just blows up these issues and makes it seem like a bigger thing than it really is. You might not have any issues at all.

@davidbradley7032 11 ай бұрын

Great video. Have about 500 rounds through mine. No issues. Love this gun. But great info. Thanks.

@zack8819 11 ай бұрын

I purchased mine about a week ago and put 250 rounds through it. I tried to replicate every issue I have seen and could not get any to replicate. It just ran everything I could put through it.

@tacticalbert 11 ай бұрын

this video was just for people who had issues. glad yours doesn't!

@Mike_The_Hog_A_Nator 9 ай бұрын

Good find. I seen on Colion's Video at I believe the 5:39 mark, you can see this happening but they didn't catch it. It's definitely out of battery

@firestonestonefire8374 10 ай бұрын

Thank you for sharing ..I'm having that issue. At least I know where and what to look for so I can enjoy it more. Can you make some videos how to switch triggers please.

@SplashCG16 10 ай бұрын

Man, that was a great video. Thanks

@stopthephilosophicalzombie9017 11 ай бұрын

Excellent video.

@tacticalbert 11 ай бұрын

Thank you very much!

@JohnnyBFlossin 11 ай бұрын

Thank you so much for you detailed explanation. I feel more confident purchasing an mc9 now. Will be inspecting the canik at the store before purchase and if they have a problem with that I will go somewhere else. I personally think that trigger looks great and looks like it improves the mush considerably. Not that caniks need an aftermarket trigger, but improvement is always good. Love my Mete SFX pro and hope to add the baby brother shortly.

@brandonbrown2202 11 ай бұрын

You don’t necessarily have to go somewhere else you can always ask the people working there if they do gunsmithing

@farhan.naushad 11 ай бұрын

It might be worth testing it with an optic on. In some cases, the optic screws can interfere with the extractor and it gets so tight that it stays behind the round instead of capturing the slot by the rim.

@johnshepherd9676 9 ай бұрын

I didn't want to sand the polymer rails until I tested the new spring Century sent me. I had 3 failures in the first 500 rounds and none afterwards. If you shoot 1500-2000 rounds through the pistol it wears down the excess materiial on its own. Although I am now satisfied with my Canik's reliabilty a 2000 round breakin period is unacceptable. I could have bought a VP9 for the cost of additional test ammo.

@tacticalbert 9 ай бұрын

I’ve got just about that round count through my gun now and no issues. So sometimes all you need is a little TLC so you don’t have to burn through all that ammo for “break in”.

@johnshepherd9676 9 ай бұрын

@@tacticalbert You sped up the process by sanding down the frame. I was reluctant to do that. I typically do not buy a carry piece that requires gunsmithing to make it work.

@user-nm7ru9nf9h 2 ай бұрын

@@johnshepherd9676 So you do not use Glocks or 1911s? I kid...I kid!!

@johnshepherd9676 2 ай бұрын

@@user-nm7ru9nf9h I use both.

@normanpersing2475 9 ай бұрын

Bought an MC9 a few days ago. Ran 40 rounds through it. I had 2 failures to go into battery. The salesman said it needs to run about 200 rounds to break in. Not satisfied with that response, I found this video and sure enough the slide rails had those raied edges. I trimmed them down level with the metal and oiled it up. The slide is much smoother when racking. I'll be heading to the range soon to try it out. I have high hopes for this pistol. Thanks for the great video!

@tacticalbert 9 ай бұрын

Make sure you polish the extractor as well

@stern2701 6 ай бұрын

“ Ok 👌 “ lol, but that’s really good to know about. I’ll spread the news. You have my dream job and I love the knowledge you have. How does one get into gunsmithing and managing a gun store?

@garyK.45ACP 11 ай бұрын

Same fixes for the same problems with 1911s. Polish the feed ramp, extractor hook and guide rails. My guess is, the problem on this gun is the extractor and/or burrs on the frame. While polishing the feed ramp and chamber mouth are fine, the 9mm is a tapered cartridge, rather than a straight cartridge like the .45 ACP, and tends to feed into the chamber easily. But again, a polished feed ramp never hurt anything. Be sure to use only a felt polishing "bob" and a mild abrasive polishing compound. I use "Mother's Mag and Aluminum Polish". Do not use any sort of abrasive burr or wheel.

@millerman9178 11 ай бұрын

Thank you so much for this video!!!

@tacticalbert 11 ай бұрын

Glad it was helpful!

@mack11beats 9 ай бұрын

I just shot 200 rounds at a ranger yesterday after buying it last week it shot perfectly , so far so good

@krodriguez1641 9 ай бұрын

Yup. Was about to buy one today. Good thing I actually do quality control before buying. 😂.

@dirkbrand5767 6 ай бұрын

Awesome... Thank you for the video.

@mountainskyaerialphotograp3921 9 ай бұрын

Yeah, I just purchased this gun. (After some great reviews). Well, the honeymoon is over. I took it out today. Shot some basic range 9mm (Blazer "brass", 115gr) and also some Atlanta 115gr range ammo. So, not good. Stove pipes, failure to feed, Not ejecting, sometimes no slide hold open after last shot. This coming from a retired LEO of 20 years, firearms instructor at the local\state\ and federal level, graduate of the FBI HRT swat schools and I have never in my life had a gun so bad right out of the box as this Canik Mete MC9. It functions with some of the defensive 115 gr Altalnta, but that was it. I was going to make this my EDC carry, but not at the moment. The magazine not dropping out of the mag well is disappointing. So, I have contact Canik and requested advise on these issues. I have a Holosun 407k and the accuracy is superb. At this moment though, I would not carry the Mete MC9, nor can I recommend this gun until these issues are resolved.

@scottlazar9731 6 ай бұрын

that frame polymer standing proud of the metal seems to be the big fix. Saw someone else who swapped to a lighter striker spring and said that helps...... what I wonder is, while your solution makes sense for a new pistol having issues in the first 100 rounds.... how would either of these issues present at the 700+ round count? I would think "burrs and spring issues" would resolve after 700+ rounds, not get worse....maybe a weak spring gets weaker, but not over sprung.... either way GREAT info, restores some faith in this pistol.....

@dr.stevenpennym.d.3241 8 ай бұрын

Excellent video. Thank you.

@VagPoop_ 25 күн бұрын

m'kay

@littlet7556 11 ай бұрын

Good find. Bad insert molding.

@tacticalbert 11 ай бұрын

very possible. i'm leaning more towards the extractor

@Broken_Arrow58 10 ай бұрын

First I've heard of this and will now think twice before purchase. Most all the reviews were so glowing. Okay?

@dragonrider385 8 ай бұрын

A great and easy fix. 👍👍

@InvidiousIgnoramus 11 ай бұрын

Hm, wasn't aware they were having this issue. Good info, I'm still interested in getting one. Unless by the time I get around to it the HK VP9CC makes it stateside. Pretty sure that will end up being the best all around micro 9 for me, especially since they're apparently going to have paddle release grip modules available.

@hutchmx9288 10 ай бұрын

I’ve enjoyed my thus far but still plan on getting a Glock, no regrets for my canik 200 rounds in and loving it.

@carlosortiz-sn2yd 10 ай бұрын

I was messing with the extraction spring on mine and improved the action a lot, but after Canik sent me a replacement recoil spring it fixed it 100% Seems like that’s all that needed in most cases.

@tacticalbert 10 ай бұрын

It’s probably a combination of both. I’m leaning towards the extractor spring tension.

@allenc4909 10 ай бұрын

Fantastic vid. Thanks.

@BabaNovac792 10 ай бұрын

You should have filmed those things - "the before"....not only show "the after"...and I'm not talking about the filling process,we all know how KZfaq censorship works. It is somewhat good that you put this out eitherway

@rodneydavis8454 Ай бұрын

Glock perfection at a 100 percent have a good day.

@richki.24 11 ай бұрын

thanks for the info

@chriscarlisle499 10 ай бұрын

I had the same issue but canik sent me a new recoil spring and problem solved. No issues since.

@drjj1289 6 ай бұрын

Me too. Free new spring. Canik is great

@johnwagner47 5 ай бұрын

Great video explaining this issue..but seems to me to be serious quality control issue..

@texasrigged5875 3 ай бұрын

Someone said just keep putting rounds threw it and it fixes it self which kinda makes sense just need time for those plastic bits to where down

@kickingworld 6 ай бұрын

Very informative. Thank you Mr. Mackey.

@austinsoto7247 3 ай бұрын

the comment I was looking for 🤣

@ontherunwriters Ай бұрын

thanks for the fix! mmkay.

@Caligari87 10 ай бұрын

any recommended tutorial on _how_ to polish parts like this? I assume it's a bit more than just attacking the feed ramp with some sandpaper.

@DangBobby 10 ай бұрын

Perfect video

@milesrost6674 Ай бұрын

Amazing. Thanks

@adamxiong5643 11 ай бұрын

Mkay Mr.Mackey

@tacticalbert 10 ай бұрын

Ok ok ok. 😄🤣

@ertert3693 11 ай бұрын

tnks bro

@tonyb-m839 10 күн бұрын

For you guys having issues going into battery, change the striker spring. Canik’s striker springs are over sprung, that’s the reason why it stays out of battery but when you press the trigger it will come forward because is releasing the pressure of the striker. If it was a problem with the frame or the feed ramp the slide wouldn’t come forward after pressing the trigger, it will remain in the same position. Go to Galloway Precisions and order the 4 pounds striker spring.

@Phatso11212 11 ай бұрын

Good information 🦾🦾🦾👍🏾

@tacticalbert 11 ай бұрын

Glad it was helpful!

@user-fp1nb5fs4o Ай бұрын

I’ve shot 175 rounds out of it so far. Out of battery issue about 35ish times. I went in knowing this may be an issue though. We’ll see if I can fix it. I appreciate the pointers. You’re the best.

@aaronq19 Ай бұрын

Hey man can you provide an update were you able to get it fixed

@user-fp1nb5fs4o 29 күн бұрын

@@aaronq19 Too early to tell but it’s had no problems the last 125 rounds I put through it. I took a small file and trimmed down some of the plastic until it was flush or below the metal rails. I also emailed century and they sent a new spring.

@aaronq19 29 күн бұрын

@@user-fp1nb5fs4o awesome I polished my feed ramp but also shaved down the polymer. I have a new recoil spring in the way and I’m also going to polish the top of the inside of my slide because there’s brass on it. I don’t know the name of it but the long metal part on the inside of the slide.

@user-fp1nb5fs4o 28 күн бұрын

@@aaronq19 I never had to polish the feed ramp. The 1st hollow point I tried chambering failed but since then I’ve had no failure to feeds with hollow points. I only had 20 rounds at the time but I rechambered them multiple times.

@PeterPan-kz2si 3 ай бұрын

Continually being out of battery is a serious issue it would been nice to see these burrs so they could be perhaps traced back to a bad batch this particular store recived I’ve over 2,500 with little to no issue.

@monteh842 11 ай бұрын

It appears Canik has quality control issues. The fix for mine was to replace the heavy Canik factory striker spring with a Glock 6lb striker spring. 6lb spring also improves trigger pull. My recoil spring is 16lb.

@Balticblue93 11 ай бұрын

That is one hell of a find. I am an Advanced Glock armorer and would have never thought to try a Glock 6lb spring. That sounds awesome, I am going to try that out on one of my test MC9's. I usually buy two. One stock and one to modify and upgrade various ways. Nice find!

@tacticalbert 11 ай бұрын

Ive now tried the Glock 6lb and a taran tact 4.5 hahahah. The 6lbs improved the pull weight tremendously. The 4.5 was just ridiculous. 6lb tested fine with 5 different rounds. Didn’t test the 4.5 yet. But I would never carry it.

@douglassantos8918 7 ай бұрын

can u please share the link for it. I just got a Canik tp9 elite SC and I am having the same issue and I am thinking about trying the striker spring for it.

@monteh842 7 ай бұрын

@douglassantos8918 Sorry, there is no link to share. Caniks were originally set up to run NATO 124 gr full power ammo. They replaced the 18lb recoil spring with the 16lb spring for our weaker 115 gr loads. They should have also gone with a lighter striker spring . It's all about the ammo & springs working together.

@denmar355 Ай бұрын

How does a striker spring affect slide velocity and going forward into battery?

@chucwgn68 9 ай бұрын

This is why I wait to see if they get the bugs worked out. I don’t care what anybody says, you should not have to be a kitchen table gunsmith with a brand new gun.

@gregorybankston6806 7 ай бұрын

Amen!

@ericr2066 10 ай бұрын

Great video. Mine started having the same issue at 500 rounds, along with failure to feed issues. I sent it back to Canik and all they did was replace the recoil spring. I got it back last week and I'm still having the same issues. I'm following the instructions in your video now. Just polished the feedramp. What file did you use for the extractor?

@tacticalbert 10 ай бұрын

Just used a basic file to make sure it wasn’t too sharp. You’re not removing material. Just polish it smokth.

@nYdGeo 2 ай бұрын

I'm down with the polishing and smoothing the extractor. But, if you mic the slide and the rails, and you'll find that the slide shouldn't even come into contact with the plastic by the metal rails. So, I find that part confusing. I'm about a month and 500-rounds in, zero issues of any type. I did order the 29-newton striker spring from Sprinco and install that a couple hundred rounds ago, and still no issues. (OEM Striker spring was nuts!) Glad you worked out the issues and thanks for the tips.

@tacticalbert 2 ай бұрын

I thought the same about the rails. But when I took out the barrel, recoil spring, firing pin, and just inserted the slide, I was able to recreate the out of battery friction. After sanding it down, it was smoother.

@nYdGeo 2 ай бұрын

@@tacticalbert well done, and thank you.

@tacticalbert 2 ай бұрын

So yeah, I get it. Canik’s way to approach this issue was to give you a stronger recoil spring. . It will slam that slide forward, negating any of the extractor spring or plastic issues.

@nYdGeo 2 ай бұрын

@@tacticalbert Indeed, cycling the slide on this pistol is the most difficult of any that we have, including my wife's P365XL Rose. The Rose is stiff, but nothing like the MC9. The Canik still cycles the slide quite reliably, likely due to the super low slide mass, and it works in a weird way. Perhaps its just because the backstrap fills and fits my hand better, but I find the MC9 more pleasant to shoot than the P365XL. That surprised me.

@DavidHBurkart 10 ай бұрын

Thank you

@aaronpat123 10 ай бұрын

Did you after polishing ramp clean and lube before using?Normally solves all issues.

@MikeV671 2 ай бұрын

Thanks for figuring this out! It’s been 9 months now and was just wondering if people are still running into this issue? I’m looking for my first firearm and the mc9 was really going to be my first choice… until watching some videos about this particular problem. Is it worth it taking the chance with this firearm?

@tacticalbert 2 ай бұрын

Anyone who had an issue and went to canik about it got a recoil spring and they said it worked fine after that. I don’t see why you shouldn’t get one. They shoot awesome.

@TheCap10Jmoski 11 ай бұрын

I have the same issue. I’m just going to trade mine in because I don’t feel comfortable having to fix a brand new pistol

@tacticalbert 11 ай бұрын

yeah the problem is, with most gun stores, you're gonna take a big hit with a trade-in. if youre not comfortable working on your own gun, just send it back to canik for repair.

@TheCap10Jmoski 11 ай бұрын

@@tacticalbert that’s a great point! Just super frustrating. First time I’ve had a firearm with issues

@tacticalbert 11 ай бұрын

@@TheCap10Jmoski if this is your only carry gun, then, yes, get it fixed and don’t carry it until you’re comfortable and tested it with several hundred rounds. Just don’t give up on it. Mine works fantastic now. This past weekend, I went head to head on a dueling tree against a guy who was shooting with a CZ scorpion, and I still beat him with this mc9.

@Shenmue06 11 ай бұрын

@@tacticalbert You probably beat him because you're a better shooter not because of the actual gun.

@tacticalbert 11 ай бұрын

@@Shenmue06 both ;).

@hernanmarin3904 8 ай бұрын

Good video thanks...question, did you use a dremel tool or a dimon for the filing? thanks in advance!

@tacticalbert 8 ай бұрын

Simple flat file works.

@Saanonymous80 4 ай бұрын

I always polish feed ramps/extractors with every new firearm

@tacticalbert 4 ай бұрын

Same here. But apparently everyone thinks that a gun should work perfect from the factory with the thousands of variations of 9mm out there.

@lgwappo 10 ай бұрын

I think this is happening with my new Canik TP9SF after about 700 rounds. It seems like a light primer strike but it's no primer strike.

@nyskydiver03 9 ай бұрын

Thanks for the video. After installing the new trigger did you trigger bar rub ever so slightly? After I installed my Freedomsmith trigger I noticed with the firearm assembled the trigger pull was ever so slightly gritty and found the back “flange” is rubbing ever so slightly. How could I fix that if possible?

@tacticalbert 9 ай бұрын

Find me on IG: tacticalbert and we’ll talk over DM. Show me where you think it’s rubbing.

@nyskydiver03 9 ай бұрын

I sent the message on IG with a couple videos. Thank you.

@slanderous.j 4 ай бұрын

Striker spring. Change to 29 Newton for less hot rounds and will solve the battery issue as well.

@Liquids.Armaments 6 ай бұрын

Change to a lighter striker spring and that will solve all the Canik out of the battery issue

@ChocolateStranger 7 ай бұрын

Really appreciate the video wanted to ask u for a 4 month update, are u still issue free, did you have to do any other modification/part replacement? Thanks for your time

@tacticalbert 7 ай бұрын

Thank you for asking. I’ve carried this gun daily and I train about 10 minutes a day dry firing and whenever I’m at the range I make sure to send a couple of mags through it. I have had no more issues. The other employee at my shop has no issues with his either. We have since installed the springco walther/canik trigger springs - making the freedomsmith even better.

@dr.bonscott3962 3 ай бұрын

By process of elimination, my recoil spring was messed up but it wasn't the entire problem. I replace the messed up recoil spring and still had the same issues. I removed the extractor, same problem. Removed the firing pin.. no problem. There's something goofy going on with the firing pin assembly. (I need to dig further into it).. 1st impression shows the main spring on it being too long and buldging against the firing pin bushing.

@tacticalbert 2 ай бұрын

let me know what you think it is.

@dr.bonscott3962 2 ай бұрын

@tacticalbert I did remove the recoil spring.. heated it up & pressed flat the end of it. Also, I did shorten the striker spring but I think I removed too much so I'm using a g19 striker spring. It runs like a champ now.. coincidentally, Century Arms sent me a new recoil spring assembly about a week after I got it running good. So now I guess I have a back up. It has its bugs but is an excellent compact once those bugs are worked out.

@fpav4049 11 ай бұрын

Mine has a problem with certain JHP ammo. The round jams into the bottom of the ramp when the slides back, insert the loaded magazine and release the slid lever. It makes 9mm ammo into 380 size rounds.

@tacticalbert 11 ай бұрын

The simple solution first is to try other hollow point ammo. Before you address anything on the gun. Not all guns like all ammo.

@fpav4049 11 ай бұрын

@@tacticalbert already did that. Barnes works great and is a very good self defense round.

@disel1983va 3 ай бұрын

hi sir info for the aftermarket trigger please nice video!

@tacticalbert 2 ай бұрын

this is a freedomsmith trigger

@mchlcordell 7 ай бұрын

If you gotta be a DYI gunsmith to fix what they should’ve addressed it’s a no go 🙅‍♂️ hopefully it improves in the near future.

@59juangonzalez 6 ай бұрын

What about the drop test issues I’ve been hearing about

@kevinmast5832 11 ай бұрын

Mkay

@tacticalbert 10 ай бұрын

Ok. Ok. Ok 😉

@adoptdontshop3916 8 ай бұрын

It is my opinion that Canik firearms should recall all Mete mc9.

@triGRIMM 10 ай бұрын

Dang I really really wanted to get one but now I'm not so sure...... Nah. I'll still get one 😅

@theflair3314 13 күн бұрын

I am only experiencing light strikes, do you know what would be causing this and what I can do to fix this issue?

@carsons3224 10 ай бұрын

Tried to do this and forgot to cover the pin and it shot out and hit me in the eye😂

@wafdaddyrocks7028 4 ай бұрын

Yes I got it cheap but spent 100 bucks on tools to finish building the gun. Believe I'll keep looking at compacts from ruger or sig.

@kousinkoolaid 11 ай бұрын

Great video. All I can say is. Ok?

@tacticalbert 10 ай бұрын

Hahaha. I say ok a lot. Yes. But I don’t care. I’m a pretty quiet guy and I love working on guns in peace. Making videos like these are a bonus for me.

@hutchmx9288 10 ай бұрын

This doesn’t appear to be everyone across the board, I have about 200 rounds through mine now and zero issues. Not to say they aren’t coming but it is a newer pistol I think some issues are expected and this is in my opinion a fairly minor issue for it being so new. Still plan on picking up a Glock 43x and p365 I shot all 3 together at range and have no regrets for the canik purchase. Also price isn’t bad at all 399 I paid before taxes.

@tacticalbert 10 ай бұрын

Mine has passed all the tests and I’m feeling pretty confident carrying it. Shoots great and very accurate

@getsmartpaul 9 ай бұрын

Hi Albert, as a new shooter, I got the Canik SFT Mete last year. Recently at the range, the Holosun Green Dot would NOT turn on ! Is this what you mean by "out of battery" issue ? Removing the battery and re-seating it seems to fix the battery not turning on. Here you describe burrs in the plastic interfering with the slide process ( Do those burrs occur from the heat of firing ? ). How does fixing the burrs fix the battery not turning on issue ? Additionally, I had a few shots not firing but started working again.I need to check that the slide action is good and the firing mechanism. Thanks :)

@getsmartpaul 9 ай бұрын

Duh, "out of battery" has NOTHING to do with batteries but the gun barrel not in the correct position on the slide right ?

@tacticalbert 9 ай бұрын

Hah. It’s ok. We all start somewhere and we all learn the terminology eventually. In this case, “out of battery” means the slide isn’t fully forward and something is preventing the slide from going fully into the closed position. With your holosun issue, I’ve seen holosuns lock up and not react to any button presses. Simply taking out the battery resets it and should work fine after putting it back in.

@stopthephilosophicalzombie9017 11 ай бұрын

The trigger seems excellent, but it definitely looks weird.

@tacticalbert 11 ай бұрын

I put freedomsmith triggers on all my caniks.

@stopthephilosophicalzombie9017 11 ай бұрын

@@tacticalbert I'm sure I'll get used to the looks.

@tacticalbert 11 ай бұрын

It may look goofy but it definitely feels 👌👌👌

@peterbrosseau4458 11 ай бұрын

It's the extractor keeping it from going into the battery. been there, trust me, this isn't the only model that has this problem

@tacticalbert 11 ай бұрын

yeah... i wonder why canik thinks it's the guide rod spring. a stronger spring certainly helps but filing/polishing the extractor should solve it.

@tacticalbert 10 ай бұрын

I think the extractor spring is also over-sprung. It’s too strong.

@gregorybankston6806 7 ай бұрын

I don't feel like I need to work on a new gun to make it right. I am not a gunsmith!

@stbeeze 7 ай бұрын

Thank you very much for explaining this. You certainly get a like and a subscribe from me my friend. 👍

@kevinmast5832 11 ай бұрын

This could be a drinking game, Mkay.

@tacticalbert 10 ай бұрын

Ok. Ok. Ok

@jasontrauer 2 ай бұрын

Isn't the greater issue that the gun is able to release the striker when not in battery?

@MikeC-dj4iu 14 күн бұрын

This video is 1 years old. Is it safe now to buy this gun? Canik sorted all quality problems?

@tacticalbert 14 күн бұрын

To my knowledge they only deal with a fix if they have to. Anyone getting an out of battery is receiving a guide rod. Or you don’t have any issue at all.