CANON C70 RIG BUILD
Рет қаралды 47,008
3 жыл бұрынCustom C70 Luts (used in this video): sellfy.com/griffin-conway/p/g...
Follow along on Instagram:
griffinconway
To hire me for Director of Photography work, please email: griffin@visioncreativeco.com
(Business inquires only)
CAMERA: bhpho.to/3xeRzoS
SMALL BUILD:
1" Mini XLR Cable: bhpho.to/3MHGUdA
Top Plate: bhpho.to/3xj2sX2
Side Plate: bhpho.to/3Al91tM
Ronin S/Manfrotto Compatible Bottom Plate: bhpho.to/3dxnTvq
Stock Canon Top Handle Adapter: bhpho.to/3wiPsPS
Smallrig Cold Shoe: bhpho.to/3dE3VPQ
RUN-N-GUN / DOCUMENTARY BUILD:
Top Plate: bhpho.to/3xj2sX2
Side Plate: bhpho.to/3Al91tM
Ronin S/Manfrotto Compatible Bottom Plate: bhpho.to/3dxnTvq
Top Handle: bhpho.to/366ardZ
Shotgun Mic: bhpho.to/3dB5I8c
Lav Mic: bhpho.to/2TkUHkF
Monitor: bhpho.to/2TkV1zT
Monitor Mount: bhpho.to/3dD7LZj
Monitor Cage: bhpho.to/3h9H68z
Canon Batteries with D Tap: bhpho.to/3hvLdL8
STUDIO/COMMERCIAL BUILD:
Full Cage Setup: bhpho.to/3Awmijw
Matte Box: bhpho.to/3AoHE1Z
Micro V Mount Setup: bhpho.to/2V0qZSl
D Tap to C70 Cable: bhpho.to/3yleNtw
Red Tool: bhpho.to/3ykKsLZ
Label Maker: amzn.to/3wbPTuX
Black Labels: amzn.to/367e7Mj
@GriffinConway 2 жыл бұрын
1" Mini XLR Cable: bhpho.to/3MHGUdA
@JasKenMoore 2 жыл бұрын
Thanks for this. But what camera did you use to shoot video and how did you achieve this lifting that only covers your frontal view and doesn't reflect behind you?
@nateperaccini8912 Жыл бұрын
This cable looks awesome. What's the mounting unit for the Low-Profile XLR-3 and the AVX-MKE2 receiver?
@leoleibo 8 ай бұрын
Hi@@nateperaccini8912 Did you find the answer? Thanks
@daviderin 3 жыл бұрын
Your channel is one of my favorites. I always get so much good info and I appreciate that you keep the fluff and hype out and just put together helpful videos. Thanks for all the work you're putting into these! Blessings.
@GriffinConway 3 жыл бұрын
Thank you! That’s what I’m going for a little more straight to the actual point of the video haha
@tatenaugle 3 жыл бұрын
Love the C70 content!
@GriffinConway 3 жыл бұрын
Awesome! Thanks for watching Tate
@Dannyhallfilms 3 жыл бұрын
Great video griffin! I love how easy it is to break down from one set up to the other!
@GriffinConway 3 жыл бұрын
Same! I love how it can be fully built up and then back down in about 30 seconds. Thanks for watching Danny!
2 жыл бұрын
So much value in your videos, Griffin. Thanks a lot for sharing your knowledge & tips. I learned a lot about the C70 from you and can't wait to finally start using it! Keep up the good work 👌
@GriffinConway 2 жыл бұрын
Thanks so much!
@hughchal 3 жыл бұрын
Time and time again I come to this channel for gems. Love your stuff Griffin.
@GriffinConway 3 жыл бұрын
Always appreciate the kind words Hugh! Thanks a lot, and really glad you are enjoying the content!
@BryanGregson Жыл бұрын
Thanks for this! This is precisely what I needed, a quick, fast, efficient way to go from gimbal to "client" rig. Bright Tangerine for the win! I do appreciate the quick pacing and the reasonings of your tutorials.
@GriffinConway Жыл бұрын
Thanks Bryan! And yes about a year later still totally love using the bright tangerine kit and find it indispensable
@romain_do 3 жыл бұрын
Great built! Love the versatility of it! Thanks for sharing
@GriffinConway 3 жыл бұрын
Thanks Romain! I apprecite you watching
@StephenBell_video 2 жыл бұрын
I will now call my c70 rig the “Griffin Rig” - thanks for the tips! 🙏🙏
@AdamSzarmack 3 жыл бұрын
Loving all your videos lately man.
@GriffinConway 3 жыл бұрын
Thanks so much Adam!
@jmsdfilms 3 жыл бұрын
Another banger camera rig setup form the great Griffin. Awesome my dude. I’ll be getting a C70 soon! Ywaaah!
@GriffinConway 3 жыл бұрын
Awesome! You are going to love it Joh Mark!
@christianely 3 жыл бұрын
Whenever I get buyers remorse with the C70, I just go to griffin and he makes everything better.
@Jimmy87268 3 жыл бұрын
May I ask what causes your buyers remorse? Like what do you miss or are not satisfied with? Just curious.
@GriffinConway 3 жыл бұрын
Haha thanks Christian!
@christianely 3 жыл бұрын
@@Jimmy87268 Nothing negative about the C70, more just spending $6k on another camera when I know my C200 gets most jobs done! But now with my C70 I can get more dynamic shots and also not fill up my hard drives every 15 minutes lol.
@GriffinConway 3 жыл бұрын
@@christianely I feel this haha. That’s the main reason I wanted to upgrade
@cuboirs 2 жыл бұрын
@@christianely how much of a difference is it as far as how much data or space taken between the c200 & c70? If you had to buy 1 today which would you go with?
@BrandonDejon 3 жыл бұрын
Thanks! This was great!
@GriffinConway 3 жыл бұрын
Thanks so much Miller!
@MichaelDrowley 3 жыл бұрын
Thanks Griffin! Good easy setup and looks like a baby c500 when fully rigged up
@GriffinConway 3 жыл бұрын
Exactly!!
@goldman7267 3 жыл бұрын
Thank you Griffin, this was the one I voted for in your poll
@GriffinConway 3 жыл бұрын
Awesome!
@anthonyreilly8814 3 жыл бұрын
Great video brother. Keep the c70 content coming.
@GriffinConway 3 жыл бұрын
Thanks for watching Anthony!
@TheRausing1 2 жыл бұрын
Man this channel is sick, you’re the real deal bro
@GriffinConway 2 жыл бұрын
Thank you!
@Cinematographer_brenton 3 жыл бұрын
love this so much bro! I've been recommending the c70 to a few people lately because it's so versatile. Keep making videos dude!
@GriffinConway 3 жыл бұрын
Same here! Glad you enjoyed it
@julienajarry 3 жыл бұрын
Nice modularity dude and it’s refined.
@GriffinConway 3 жыл бұрын
Thanks Julien! Trying to get on your rig building level bro!
@matthewmaccarthy8542 3 жыл бұрын
Great video. Congrats on the B&H approval.
@GriffinConway 3 жыл бұрын
Thanks Matthew!
@POVmotoVIDS Жыл бұрын
Monitor goes wiggle wiggle. Serious note, great videos, for sure helpful especially the one comparing fx3 to c70.
@renaldojackson136 2 жыл бұрын
AWESOME rig Im looking into CanonC70 now...
@GriffinConway 2 жыл бұрын
Thanks Renaldo! The c70 is such a great camera
@TannerGrandstaff 3 жыл бұрын
Love it, Griffin! My heart broke a little when you mentioned the client’s comment because I’m considering the C70 for my next cam
@GriffinConway 3 жыл бұрын
It’s a great cam, and I just had a shoot yesterday with it fully rigged out and the client was stoked on it. He was taking bts pics with the cam and tagging his sponsors. Goes to show with a little rig build out you can definitely change the perception!
@mat4123 3 жыл бұрын
Hi Griffin, would love a more detailed look at how you mount and convert the AVX receiver. It looks very neat
@GriffinConway 3 жыл бұрын
Hey Mat! It’s the cold shoe adapter that is included with the avx wireless kit goes directly on to the cold shoe on the bright tangerine side plate. Then for cabling, I had a custom 1” mini xlr to full size xlr made from a company called cable techniques. You can Google them and order off their website. Unfortunately there is no direct link for that. You just need to write them an email and ask for the custom length
@christophermcguinness 2 жыл бұрын
I just ordered the Label Maker with black Ink on white in your links. I have been writing on white camera tape for years, but I like how clean the black with white ink looks... You ROCK Griffin! Thank you.
@GriffinConway 2 жыл бұрын
Thanks Christopher! My handwriting sucks so I had to find a better solution haha
@christophermcguinness 2 жыл бұрын
@@GriffinConway I feel you, my hand writing also sucks , lol, so this will be welcome! TY
@TFaminu 3 жыл бұрын
And great video breakdown!
@GriffinConway 3 жыл бұрын
Thank you Tola!
@ChrisFrancis Жыл бұрын
black label hack is genius, just ordered!
@GriffinConway Жыл бұрын
I love that upgrade! So cheap and so good haha
@KirthNoel 2 жыл бұрын
Thanks for your tips man. im currently looking to get this camera so im doing my research and got lost in your videos. Very well presented. Good luck.
@karanshetty2530 3 жыл бұрын
Love the flexibility of the rig, I like a similar operation and currently working towards deciding my next camera. I would love to own the C500Markii but in all honesty it will be something like the C70. Will bookmark this video as it might come handy later. Awesome video as always and sick background setup.
@GriffinConway 3 жыл бұрын
Awesome Karan! Glad you enjoyed it. I love the flexibility too. I call it my baby c500 when it’s all rigged out haha
@karanshetty2530 3 жыл бұрын
@@GriffinConway Efficiency is always appreciated on set for sure. Hahah it is a baby c500, cuts really well together.
@brandonbrodie4547 3 жыл бұрын
Great video, Griffin! This is the video I was waiting for. Just picked up the kit from B&H using your affiliate link. Appreciate you.
@GriffinConway 3 жыл бұрын
So awesome Brandon! Really appreciate the support bro. Let me know what you think of it! Which one did you go for?
@brandonbrodie4547 3 жыл бұрын
@@GriffinConway Ended up getting the expert kit. Seemed like the perfect fit for my needs. Definitely costly but I am sure it's going to be a huge time saver!
@kmshairstay 2 жыл бұрын
Damn that’s a lot of tubes in the background sheeeshhh 😍
@banemeathleticclub 2 жыл бұрын
Fantastic build! Glad I found this video - definitely earned a subscribe! Can we hear more about that lens though!?
@shzammpatapon9865 3 жыл бұрын
those one with no cage build is the one I'm going for. tq. using the canon top handle is fine for me
@GriffinConway 3 жыл бұрын
For sure! That’s still a solid setup
@christhompsonphotography6783 2 жыл бұрын
Black Labels for the win!
@josephberkeley Жыл бұрын
Hi, Griffin. Thanks for this video. I just used your affiliate links to order the basic Bright Tangerine build for the C70. Enjoy your work and your point of view on the craft.
@hectorgonzalezh.3980 5 ай бұрын
At that price. Obviously it has to be a really cool camera.
@TylerEdwards 3 жыл бұрын
Such clean builds bro! Ahhh the C70 is tempting me so bad haha
@MichaelDrowley 3 жыл бұрын
Same! Griffin is selling it to me one video at a time
@GriffinConway 3 жыл бұрын
Lets gooo!
@GriffinConway 3 жыл бұрын
Haha awesome!
@WaltervanDusen 3 жыл бұрын
I found this video because I was searching for Misfit Kick Matte Boxes and almost didn’t watch it because you use Canon (Sony user 😳😜😬). I’m really happy that I watched this video along with your extremely informative BTS videos. You share really great tips and nuggets that I’m now a very happy subscriber to your channel. Have a great day.
@GriffinConway 3 жыл бұрын
Thanks a lot Walter! Are there any bts videos you would like to see in the future? I’m always looking for new ideas
@WaltervanDusen 3 жыл бұрын
@@GriffinConway I love the BTS videos that you are releasing. I’m personally in my audio learning journey so any videos about audio I’m extremely interested in. I own the MIXPRE3 and several wireless audio devices plus wireless audio boom pole; now I have to learn and get much better with my audio.
@dna8269 3 жыл бұрын
I second this. Audio tips would be great
@DanielMann 3 жыл бұрын
Such a clean rig. I use a C70 for work and those exact radio mics. What full size to mini XLR adaptor is that? Only have the long black magic ones which are very messy.
@GriffinConway 3 жыл бұрын
That’s awesome Daniel. It’s a custom 1” cable from cable techniques
@DanielMann 3 жыл бұрын
@@GriffinConway thought it must have been a custom job, very tidy indeed!
@SheldonCharron 3 жыл бұрын
@@GriffinConway Love that cable. Pick up a C70 and R5 tomorrow, so I'm going to look for one of them. I'm in Beverly Hills, but might be moving to OC, so perhaps I will see you around. Cheers.
@JimFeeley 2 жыл бұрын
@@GriffinConway sorry I didn't see that you'd already answered my question. D'oh!
@tiggermedia 2 жыл бұрын
Thanks for this video Griffin. Could you give a link to that clamp that is holding that radio mic?
@frontfoot1035 2 жыл бұрын
So I went and copied this rig 95%. Its amazing and thank you for sharing it. Curious how the shotgun mic is attached. Thanks!
@frasermacmannis614 3 жыл бұрын
I want to get a cage for the c70, but just ordered a laser cut Jason case. I do mostly talking heads/quick b-role. Love my bright tangerine cage on my c500ii tho!
@GriffinConway 3 жыл бұрын
Dude those Jason Cases are so sick. I was looking at one yesterday. Let me know how you like it Fraser!
@TristanErvin 3 жыл бұрын
Nice setup man - thanks for this video. Just bought my C70 last week and looking for a way to mount my Ninja V with my Rode NTG 4+
@davecooper6173 3 жыл бұрын
I just got my C70 and am building it out now as minimally as possible. I'm also searching for a solution to mount the Rode shotgun mics that accommodates my Shinobi 7" monitor. I've got the Smallrig C70 small kit (baseplate, top plate, handle). Haven't found a solution yet.
@motionbymike 2 жыл бұрын
@@davecooper6173 I'm using the small rig kit too and I just use the shotgun mic adaptor that came with the C70 and I mount it to the left cold shoe. It doesn't interfere with the monitor when it's on the small rig handle either
@davecooper6173 2 жыл бұрын
@@motionbymike Never mind I figured it out. I had NO IDEA that adapter was useful. I ignored it. Thank you again!
@maggie3458 3 жыл бұрын
Thanks for the video! Commenting to help grow your channel. Love the content, especially BTS videos :)
@GriffinConway 3 жыл бұрын
Thanks so much!
@RossHarrisonFilm 2 жыл бұрын
Tip for anyone considering moving to the AVX system from a radio wireless - older DPA mics may cause interference and be unusable, my DPA 4060 lav does.
@SoundItOutFilms 3 жыл бұрын
Great video! I haven't pulled the trigger on a cage yet because the only accessory I really want to add is my Teradek. Right now I awkwardly attach it to the top handle via the cold shoe. Any suggestions for possible configurations?
@GriffinConway 3 жыл бұрын
Thank you! When I run my teradek on top of the camera with no monitor/mic/other accessories I just use this: bhpho.to/3hiDqSl Now that I have the cage though I mount it to the v mount plate
@AndyTran 2 жыл бұрын
Great video! Do you have a video on how to set it up with the ninja V? Do you record from ninja v or do you still record from c70?
@dalelasoul8359 3 жыл бұрын
I'm more stoked on the cart haha, is that an Inovativ cart? Great breakdown as always man! Would be dope to see some c70 + vintage lens comparisons for the optic nerds!
@GriffinConway 3 жыл бұрын
Haha ya the cart is great! It's the Inovativ Voyager 42 nxt. I am planning some more content around lenses. DZO's, Leicas, Iron Glass Helios, Kowas, etc
@dalelasoul8359 3 жыл бұрын
@@GriffinConway Oh I'm liking that lens lineup! I have a personal set of Canon FD L series as well as my 35mm Lomo Squarefront, if you're open to some lens invitations! :)
@GriffinConway 3 жыл бұрын
@@dalelasoul8359 where are you based out of? Those lomo square fronts are amazing
@frank-herzmann 2 жыл бұрын
Hey Griffin, thank you so much for making these informative Videos. I have a simple Question: Which Memory Card can you recommend for professional work with the C70?
@laurencegrant2882 2 жыл бұрын
Thanks for video. Do you ever feel you need a left side handle for stability?
@AjushiPhotography 2 жыл бұрын
Great Video! But, what do you use for a follow focus in any of the builds? I do not anything in the description?
@johnclay7644 3 жыл бұрын
Interesting.
@GriffinConway 3 жыл бұрын
🤙
@MattHarder 3 жыл бұрын
Hey damn nice rig ! So you plug in the D-tap 14.8 V from the V-Mount Battery into the 24 V DC port of the Camera ? Is there any problem doing this ? Thanks for your video and your help !
@damiencooper 2 жыл бұрын
Finally coming around to watching this. Great idea with the battery. Didn't know that existed... Could make for a really clean run&gun rig when paired with the speedbooster. You're still using that, right?
@GriffinConway 2 жыл бұрын
Hey Damien! Yes I just used it actually to film a concert. Works great when you need the rig to be smaller, and only one battery to think about for the monitor and camera.
@damiencooper 2 жыл бұрын
@@GriffinConway I don't think you can get these here in europe though. :/ I might actually look into the whole C70 with speedbooster for a smaller lighter setup that gives me wider lens choices!
@janvolbracht6362 2 жыл бұрын
@@damiencooper you can get the Core SVX Batteries in Germany from video data for example. And there is an option from Händel wich you can get from calumet.
@gb4639 Жыл бұрын
Thanks for the video Griffin. I just assembled my expert tangerine rig on the C70 and found a design flaw. First, if your using the HDMI clamp, you can't turn the side screw above the quick release clamp used to tighten the dovetail plate. So, you must first remove the HDMI clamp but even then the side screw to tighten the dovetail will not fully turn 360 degrees because it hits the quick release clamp. You can still make it work but its really an inconvenience. I noticed in your video that you were able to completely turn your side screw but you didn't have the HDMI clamp on. My clamp might be an isolated case or did you have to shave down the side screw handle in order to turn it 360 degrees?
@Mike_AfterTen 2 жыл бұрын
Love the Content Griffin!! Subscribed!! Question - Do you ever build and use a shoulder rig for the C70 ??
@GriffinConway 2 жыл бұрын
Thank you! No I don’t like shooting off the shoulder because I’m 6’5” so it always looks like I’m looking down from the camera at people haha
@williamsitton 2 жыл бұрын
Send that c70 in for repair before that hinge causes further frustration while working! I just got mine replaced and it took 4 days to get repaired and sent back to my home. They will service it for free. it may be wiggly and still work now but it puts major stress on the ribbon cable connecting the monitor. It will eventually break.
@GriffinConway 2 жыл бұрын
I already got it serviced and it’s working great now!
@RVEastCoast 3 жыл бұрын
Thank you so much for making these videos Griffin. I noticed around 2:04 how much the LCD monitor moves, it looks flimsy, can you tell me about it, please?
@GriffinConway 3 жыл бұрын
I need to take it in for repair. Canon fixes it for free under warranty
@RVEastCoast 3 жыл бұрын
@@GriffinConway Do you think it's a design flaw or it was just an accident?
@D_L_J_83 Жыл бұрын
Hi Griffin. Has your rig evolved this past year?
@JordynDunseath 2 жыл бұрын
Hi Griffin! Thank you so much for this video! I just bought the full studio rig off of your links so I hope that gives you a nice payout 😊! I have been trying to figure out how you powered the ninja and camera off of one dtap, would you mind sharing how you did that? Also, do you have full trust in that wooden camera cable over a dummy battery? Thank you so much Griffin!
@GriffinConway 2 жыл бұрын
Thanks for that! I appreciate it. I power the camera off of the D tap port on the IDX battery plate using the wooden camera c70 to d tap cable. I have used it for several hundred hours without issue. To power the monitor I use a NPF dummy battery to d tap and plug it in to the second d tap port on the other side of the IDX battery plate. Hope that makes sense!
@JordynDunseath 2 жыл бұрын
@@GriffinConway that makes perfect sense! Thank you so so much! I have one more question if you don’t mind. I hate rushing things but all normal c70 batteries are on backorder, and the vmount kit you suggested won’t arrive in time for me for a big shoot. Do you have an alternative recommendation for a vmount plate/battery that I could possibly get through Amazon prime? You can send me an affiliate and I can buy off of that! No worries if you don’t have time for this…don’t want to bombard you. I appreciate you answering my first two questions 😊
@caquirin 2 жыл бұрын
How do you manage all of your cords for things like shotguns and mics? I guess one issue for me is that I already had audio equipment using XLR cords, so once I add mini XLR to XLR adaptors into the mix, it's a mess. This is my biggest issue when I use small cameras-- the cords are everywhere
@aspiresaadi 2 жыл бұрын
I bought the bright tangerine dji dovetail for my c70 but for some reason it wont go in all the way and jams in the middle . Have you faced any similar issues when first installing it
@threethroneproductions5498 2 жыл бұрын
Hey Griffin, Nice video. I got a standard V month battery and smallrig plate holder ( with any connector). When I plugged the V mount to my c70, nothing happened. What did I do wrong. ( V mount battery is 14.8V 99 Wh)
@HippyCheez11 3 жыл бұрын
hey what elbow adapter is that you using to attach ur senheisser lav remote? I have the cord mini to large but that looks clean!
@alexmainwaring Жыл бұрын
Hey Griffin, do you think it would be possible to hook up 2x Sennheiser AVX receivers in the mini xlr jacks w/ adapters or is there not enough room to rig them?
@JoshBirman 2 жыл бұрын
What XLR cable are you using to connect your AVX Wireless receiver? It's so tiny and amazing!
@GriffinConway 2 жыл бұрын
I had it custom made! Now they sell it since so many people requested the same one haha www.cabletechniques.com/product-page/1-low-profile-xlr-3f-to-canon-eos-c70-cable
@jessejayphotography 2 жыл бұрын
That C70 screen flopping around like a fish. What was canon thinking...
@persvanstrom 2 жыл бұрын
I'm an amateur KZfaqr hoping to progress into professional jobs. I'm currently working on R6 but want to up my video value. As you are both a pro and Canon user, would you recommend the Ninja V for my R6 or directly to a C70? I only got RF glass atm and planning my first rig
@Papa_EP 2 жыл бұрын
I like the Core battery with Dtap option. What charging system are you using for that battery? Seems like there are lot of complaints online about it's ability to sit on the BP block.
@GriffinConway 2 жыл бұрын
I have four of those batteries and exclusively use the canon c70 charger with it. Works great for me
@TFaminu 3 жыл бұрын
What are those lights in the background my brother! Quasar or Astera? Love those.
@GriffinConway 3 жыл бұрын
Quasars! bhpho.to/3dDC8Pf
@OB_shredder Жыл бұрын
Which Helios 42-2 is that? And what metabones are you using?
@robwhitmore3040 3 жыл бұрын
Hey Griffin, my work is looking at getting a few C70s for us to shoot with (we do mostly doco style stuff) and currently we're all running with C200 for video and 1Dx MK3s for stills. I'd love to know if you're still using the 1Dx Mk3 and what file types you shoot as well as how you process them. The camera seems to have been shunned by the photo/video community so I'm struggling to find help on how to get good video results with it.
@GriffinConway 3 жыл бұрын
I still love my 1dx3. it's a beast and it excels in tough environments (rain/snow/sand etc). I never have to worry about that camera where other cameras I have to get a cover for them. What makes it challenging are the codecs (raw looks great but massive files / h.265 is hard to edit), the lack of proper exposure tools (false color, waveform), 30 min record limit, and no flip screen. I greatly prefer to use the c70 for professional video, and it really excels in a documentary type shoot.
@RossHarrisonFilm 2 жыл бұрын
Have you experienced the C70 freezing when using the RS2 camera control button to start/stop recording? Seems other people online have this issue and it was really bugging me on my last shoot - needing to unplug battery to restart C70!
@GriffinConway 2 жыл бұрын
I have heard of that happening a lot with the rs2 and c70. I heard DJI needs to do an update
@JimFeeley 2 жыл бұрын
Hey Griffen, thanks for the video. So where did you get that short mini-XLR/TA3M to XLR adapter cable? DIY? Off the rack? Thanks!
@GriffinConway 2 жыл бұрын
I custom ordered it through cable techniques. Just go to their website and order the mini xlr to full xlr and add a comment in the order notes to make the cable 1” or however long you want it
@jasontrembath9342 3 жыл бұрын
Awesome video Griffin! thanks for sharing I got a lot out of this. What's your thoughts on the Bright Tangerine vs the Kondor Blue Canon C70 cage? Is there a reason you went Bright Tangerine here?
@GriffinConway 3 жыл бұрын
Hey Jason, thanks a lot! I like the Kondor Blue one better than most of the other cages. A few reasons I chose the bright tangerine cage over the kondor blue 1) it fully supports the weight of the camera with the side plate connecting the top and bottom. 2) it natively supports manfrotto/ronin s2 baseplate (instead of the arca type that won’t work with my tripods) 3) front to back counterbalancing for bigger / smaller lenses 4) The bright tangerine cage can work with larger Arri dovetail setups like my c500 cage can 5) I prefer the color / design of the bright tangerine cage
@jasontrembath9342 3 жыл бұрын
@@GriffinConway Perfect, thanks very much for the detailed answer on the comparison, that's greatly appreciated mate! (I'm definitely now going Bright Tangerine!) I'm a big fan of your channel and videos, just subscribed!
@matthewclark3023 2 жыл бұрын
Hi Griffin, just ordered this setup via your link, thanks for the idea. One question, how did you attach the Deity to the top handle in the Run-N-Gun build?
@jordanbeaujour4529 2 жыл бұрын
Hey griffin was wondering the same thing here
@tycooper7780 2 жыл бұрын
@@jordanbeaujour4529 Matthew asked 4 months ago, Grif is no longer on this planet.
@aho6172 2 жыл бұрын
Hi Griffin, I'm looking to find a solution on how to power my SmallHd 702 montior from my batteries with dtap. I'm struggling to find the right cable to do that. Can you help me with that? :) I've seen in another video that you guys are also using a small hd monitor, so maybe you know! Thanks so much in advance! Tom
@PrezzMr 2 жыл бұрын
Hi Griffin, thank you for this video! I have a question, I am currently in pre-production for a documentary and I need to travel across the states for a few interviews. Unfortunately, it is a hassle to travel with gear and I'd like to know what cases you'd recommend for this, I'm also planning to bring two lights along with me and a two tripods as well, if you know of any cases that fit light stands and tripods let me know, thank you!
@GriffinConway 2 жыл бұрын
kzfaq.info/get/bejne/iryPY5letd3eep8.html. check this video! It's pretty much made to answer this exact question (I had the same question as well haha)
@avtoportret 3 жыл бұрын
Thanks for the video! Pain to watch how the C70 monitor is almost falling apart.
@ridinoutfilms866 3 жыл бұрын
I noticed the monitor flopping around also. I sent mine back to Canon for repair, got it back within a week so hope it holds up.
@GriffinConway 3 жыл бұрын
Im about to send it in for repair soon
@johnduarte1270 3 жыл бұрын
Hey Griffin, what RF TO PL mount adapter do you use for the C70? Might need one for an upcoming project.Thanks ahead of time for any help. Appreciate your videos. Super well done.
@GriffinConway 3 жыл бұрын
Thank you. I use this one: bhpho.to/3AStBlM
@johnduarte1270 3 жыл бұрын
@@GriffinConway Thanks man!
@FoxWeddings 3 жыл бұрын
This may sound dumb but how are you able to use the back screen to change your setting when it's fully built out? We picked up a c70 a month ago and I am still building it out. We mostly shoot weddings but our style of reception coverage demands us to have a light rig that we can shoot hand-held during all of the craziness of the receptions.
@GriffinConway 3 жыл бұрын
If I were shooting weddings I would use my documentary style build which would allow full access to the screen. That said, I usually use all the buttons on the side instead of the screen just out of personal preference
@FoxWeddings 3 жыл бұрын
@@GriffinConway Thank you for responding! How are you not able to use the screen? Are you able to display all of your setting on your Ninja? I have not found out how to see my iso, shutter speed, ect. on my ninja.
@saiaint1443 2 жыл бұрын
Hey Griffin could you tell where to get the equipment?
@GriffinConway 2 жыл бұрын
Everything I talked about is linked in the description of the video 🤙
@lukecatena7567 3 жыл бұрын
Love the rig especially the AVX compact setup you have. However your screen looked soo loose at 2:05 which is worry-some. How have you found it holding up in a professional environment because seeing so many other examples of it breaking I feel like I can't trust it
@dustinschmidt2752 3 жыл бұрын
Same thought here. Wow that screen looked loose.
@GriffinConway 3 жыл бұрын
Thanks Luke! Yep I need to send mine in for repair unfortunately, but wanted to get the video out this week! We have 2 others in the production and they seem fine.
@GriffinConway 3 жыл бұрын
100% Dustin it's on full sketchy mode right now lol
@scottievee7467 3 жыл бұрын
Good stuff Griffin. Thanks. I couldn't help but notice your LCD screen bouncing around? Mine is still rigid. I hear people sent it back for repairs. I'm assuming yours is still 1st gen??
@GriffinConway 3 жыл бұрын
Hey Scottie! Yes I need to send mine in badly but I wanted to get the video out first haha
@attilafilmhouse6345 3 жыл бұрын
Hi, is there a 2nd generation LCD screens? Do they ship the new cameras with the updated version?
@TruthReviews 2 жыл бұрын
Great videos. Does the flip out screen wobble a bit?
@GriffinConway 2 жыл бұрын
Thank you. It did but I sent it in to canon and they fixed it for free
@TruthReviews 2 жыл бұрын
@@GriffinConway thank you for the reply. Watched almost all the c70 videos. Great content and really enjoyable to watch.
@joshuamartinstudios 3 жыл бұрын
Loved watching this build but bro that flip out screen has me worried haha it was wiggling A LOT
@GriffinConway 3 жыл бұрын
Lol! Ya I need to take it in. I had a few shoots this week so I couldn’t be without it, but I’m taking it in soon. Warranty will cover it so not a huge deal
@ColemanWorld 2 жыл бұрын
So you record audio twice with the sennheiser and the deity?
@GriffinConway 2 жыл бұрын
I like to have redundant audio and then choose which one sounds best in the edit
@jakehorgan2477 Жыл бұрын
Hey Griffin, what RF to PL adapter system do you use and how do you support it while using the Bright Tangerine RS2 quick release baseplate? Having trouble finding a stable configuration. Thanks man!
@GriffinConway Жыл бұрын
I use the metabones RF to PL and it's great. bhpho.to/3AStBlM
@D_L_J_83 2 жыл бұрын
How do you mount the transmitter on the C70 for wireless with your monitor?
@GriffinConway 2 жыл бұрын
There is a cold shoe on the side of the cage that I use
@peterthehusky8165 2 жыл бұрын
I checked the prices... I would describe it as "outrageous" instead of "pricey" XD
@joedoe7506 Жыл бұрын
What is the attachment for low profile xlr-3f to canon cable called? Thanks
@GriffinConway Жыл бұрын
I linked it in the description if you are looking for it 🤙
@user-nu8bf3bf9m 3 жыл бұрын
your rs2 looks super interesting! Do you use vmount battery with that tilta plate? Also I spot a little silver thing on the back handle. Does that mean youre using rs2 with easy rig? Please go over your rs2 setup next time !! (:
@GriffinConway 3 жыл бұрын
This ronin s2 is actually @kevinreyes personal one. Shoot him a dm and he will have all the details for ya
@user-nu8bf3bf9m 3 жыл бұрын
@@GriffinConway Got it! Thank you as always (:
@GriffinConway 3 жыл бұрын
My pleasure
@heavymeowtal7638 3 жыл бұрын
About the red Multitool, the Red Sidewinder ( bh link) doesnt have the holes on each side as your Red Multitool Is this version discontinued or just a different model?
@GriffinConway 3 жыл бұрын
I think it is just the updated version. I never really use the side holes anyway
@chadkonik 2 жыл бұрын
OCD kicking in seeing that lens in bottom right with no cap on lol
@GriffinConway 2 жыл бұрын
You would hate seeing how my cart usually looks on shoots 🤪😂😂😂
@pixelreflexmedia Жыл бұрын
Thanks for making this video it was the deciding factor for me to order the expert kit and the Micro V Mount setup. I am also looking to get an external monitor. Do you use the Ninja V regularly, or would you recommend another?
@GriffinConway Жыл бұрын
Thank you! I would go for a different monitor other than the ninja. I don’t like the way it handles color. Probably an offering from smallhd is what I would reccomend
@pixelreflexmedia Жыл бұрын
@@GriffinConway Thanks for the recommendation for the Small HD monitor. I purchased the 702 Touch. Question about the V Micro battery. I've been using it without issue, but yesterday I got a low voltage warning from the C70, and it shut down. Is it because it's drawing too much power with the monitor and the camera? The battery was at half power when it happened. I switched to a CORE powerbase Edge Pro X14.8, and it worked for the rest of the shoot.
@trufocusproductions Жыл бұрын
@@GriffinConway With your external monitor that you mention at 7:31. Is that a Small HD? Also what are you using as you Wireless Transmitter & Receiver System to see the other camera?
@DanYang 2 жыл бұрын
Griffin, how did you get the Deity D3 to work with your C70? When I use the regular TRRS cable it stays in standby and does not work? Did you have to purchase a 3rd party cable and if so which one? Thanks!
@GriffinConway 2 жыл бұрын
Turn on plug in power on the c70 it’s in the audio settings
@Media523 3 жыл бұрын
What codec are you recording to with the Ninja?
@GriffinConway 3 жыл бұрын
I usually just use it as a monitor unless I am capturing bts and want to show my screen overlays
@stefanthorndahl1666 3 жыл бұрын
I like your stuff :) this is totally off topic, but have you ever shot on film? (if so, what and why?) :)
@GriffinConway 3 жыл бұрын
I haven’t! I want to though. My friend bought a super 8 film camera off Craigslist and it’s so cool.
@RickyTheCreator 3 жыл бұрын
its looks like the c70s have replaced the c200 arsenal! Do you still use your c200s now that you have the c70s?
@GriffinConway 3 жыл бұрын
Hey Ricky! We still use four c200’s in our studio. For run n gun, commercial, and documentary work I prefer the c70 though. I still like the c200 because it has sdi and we need that for our switcher
@lionroots11 2 жыл бұрын
Hi Griffin the hole where tripod fit on the c70 is bigger then Normal how do I fix that?
@GriffinConway 2 жыл бұрын
It is a 3/8” screw hole instead of 1/4”. I would suggest buying a bright tangerine c70 baseplate, and if that’s not an option I would just get a 1/4” to 3/8” adapter. They cost only about $1
@lionroots11 2 жыл бұрын
@@GriffinConway thank you it's a little confusing. Would it be much to ask to post a link under this comment for both. I just want to make sure I buy the right things I am not sure what they look like. This is the first I've encounter somthing like this. Thanks for helping
@lionroots11 2 жыл бұрын
@@GriffinConway hi is this this the adopter
@only2tym 2 жыл бұрын
Hi Griffin, what parts are you using to 1) hold your sennheisser lav mic receiver to the side plate, and 2) connect the lav mic receiver to your camera?
@a9m0i0r Жыл бұрын
Also wondering this!
@a9m0i0r Жыл бұрын
to answer #1, it looks like it's held to the plate by the cold shoe adapter included with the Senheisser lav. Photos below www.onerivermedia.com/blog/reviewing-the-sennheiser-avx-mke2-wireless-audio-system/
Poly Holy Yow Spanish
Рет қаралды 28 МЛН