Canon Printer Not Printing Color Correctly -Solved- Canon G3000/G3010/G2010/G2000

Рет қаралды 709,165

3 жыл бұрын

Canon Printer Not Printing Color Correctly Solved If you have the Canon G3000/G3010/G2010/G2000 and its not printing colors correctly or you are missing one color or you have some issue with the printing. Do as shown in the video and solve the problem.
Watch the video and be inspired.
Watch the entire series if you have not seen the previous videos.
• Successful Entrepreneu...
Subscribe to the channel as i will be uploading a new video every day.
/ @topevt
Like share subscribe.
This has been Jamie for TopEvt
You have a nice day.
All money earned and will be earned from this channel will be donated to Charity!
topevt.com/
Twitter @TopEvt / topevt
Instagram @topevt / topevt
Google+plus.google.com/1140419784053...
Minds @topevt www.minds.com/topevt
If you need Business advice, Entrepreneurship advice, or success Motivation advice setup a phone appointment with me by sending a Whatsapp message on the number below.
Charge is 1000₹ per 30 minute of phone consultation
For Paid motivational Speaking and Paid Business Consulting please Contact
#CanonPrinter #WirelessPrinter #Problem

Пікірлер: 860

@kristyburns428 Жыл бұрын

THANK YOU SO MUCH!!!! I messed with my printer FOR HOURS trying to find out how to fix it!!! I wasted A LOT of paper and time. My son told me to ask KZfaq how to fix it and I found your video, followed your instructions AND IT WORKED right away!! I am so happy that it's working properly again!

@TopEvt Жыл бұрын

Glad I could help!

@Ashlafler402 Жыл бұрын

I've been trying to fix this for weeks!!!! Tried this and it FINALLY WORKS AGAIN!!! Thank you SOOOO MUCH!!! You're an absolute life saver! Now I can FINALLY print my diagrams for class!!!!

@TopEvt Жыл бұрын

Glad it helped. You are welcome.

@heatherhowell4559 Жыл бұрын

Thanks from Arkansas! Canon could make it this easy but you’re the one that did it instead. Much appreciation for your time.

@stuartdear3585 2 жыл бұрын

Fantastic! You’re a star. I followed your easy to understand instructions and it all works perfectly now! I’ve put up with it being wrong for weeks! Thank you.

@TopEvt 2 жыл бұрын

Glad it helped!

@headbanger1428 2 жыл бұрын

Canon software sucks! It kept saying I had an error with my printer and needed service. I used your 5-flash amber light technique, and my color jets cleared. I’ve been printing holiday photos now for a while on my Canon Pixma G2400. Legit video! Thank you!

@timmortimer7785 2 жыл бұрын

It worked for me too! Saved my daughters 10pm colour printing emergency. Well done great video. I will remember the routine for next time. Thanks!

@TopEvt 2 жыл бұрын

Glad it helped!

@simoncrase5360 Жыл бұрын

Jamie, thank you! You've saved me from making an expensive call to the repairman!

@achillesdumbeldore 3 жыл бұрын

Bro, that is amazing information in such a short video. Incredible! Thank you so much!!

@TopEvt 3 жыл бұрын

Glad it was helpful!

@yahjah2472 2 жыл бұрын

Thank you very much for your time and sharing this information. I have the Canon g3202 and I try running it twice a week at least. Never had issues since I purchased it until last week when I forgot to run it then I noticed the colors was off. Your video was the first I found and the issue was corrected. So again, thank you very much😊

@TopEvt 2 жыл бұрын

Glad it helped

@YINGIsHere Жыл бұрын

I also have the 3202 and rn my magenta isn't printing. I wonder why it's such a common issue.

@anthonymccolgan3547 2 жыл бұрын

Brilliant! Thank you, I was on the way to thinking I would have to send it away (as stated in the manual) when your simple remedy solved the problem. Wish you all the very best, tidy or untidy!!

@TopEvt 2 жыл бұрын

Glad it helped!

@andrevalentine5332 2 жыл бұрын

@@TopEvt Test print not working on PIXMA G2411. Please assist

@mymail523 3 жыл бұрын

Hey ! This works for pulling ink through for airlocked pipes.! Others use/purchase syringes to pull it though! This maintenance mode (10 mins +) is much more advanced than the normal! So brilliant dude! Sorts the poor print AND airlocks! You can see it bubbling through the chambers! Note: Mine is a G3501, and to get it into 'Service mode' is slightly different!

@stevepowers1964 2 жыл бұрын

I followed these steps and it worked like a charm! Thank you

@asgharali3672 2 жыл бұрын

The amount of ink this process takes is insanity. Thank you for the very good video regardless. Great video!

@TopEvt 2 жыл бұрын

Glad it was helpful!

@jinweigan6934 2 жыл бұрын

@@TopEvt why the ink is becoming lesser?

@ayonbiswas4186 Жыл бұрын

@@jinweigan6934 Because it is flooding the pipes, driving out all the air from it.

@tabassumshaikh2732 3 жыл бұрын

Thank you for such an easy solution.... I was thinking of opening the whole printer.. 😂😂😂

@TopEvt 3 жыл бұрын

Glad I could help!

@bristitalukdar768 3 жыл бұрын

Me also 😂

@kengamsrinivas3818 2 жыл бұрын

Bro it's taking 30 minutes time and it's also blinking the lights What is the solution

@MsMobian 2 жыл бұрын

I tried this multiple times whenever I got these issues and every time this video helps. Thanks!!!!!

@KishanSingh-ow1cc 2 жыл бұрын

Dekhne me to lagta h....bass fekk rahe ho....prr bhaishaab sachme kaam karta h ye tarekka, error 5200 dekha raha tha...jab deep cleaning ki kosis kare to, laga tha gaya 2-5 hazar, prr apke video ne bacha liya...STOP button dabaya 10 minute wait and done. bahut bahut dhanyvad. Keep on the good work thankssss bhaishaab

@atifsiddique1016 2 жыл бұрын

Sir, you are genius. I followed your instructions, within 10 mins my problem was solved saved my Rs. 400/- technician service charge. Thank you god bless.. channel subscribed:)

@TopEvt 2 жыл бұрын

You are most welcome

@PetriaBROOKE-CARR 2 ай бұрын

Thank you so much!!! I spent all day trying to sort this problem and in the evening came across your video. Problem solved in just moments! Ink colour working! Phew!!

@annfifield2587 Жыл бұрын

So relieved (and amazed)....your a star and many thanks for making the effort to put this on youtube.

@vlackpevrl7247 2 жыл бұрын

This is gonna be funny but... At first, I thought my printer is colorblind XD

@TopEvt 2 жыл бұрын

lol

@adityagaike8889 2 жыл бұрын

lol XD

@icarussam6884 2 жыл бұрын

I did as you said, but it's still not printing color got any other fixes or tips to help solve the issue?

@TheGuyFromCali 10 ай бұрын

I have a Cannon G7020 and it worked. I got to the setting a little differently, via the LCD, but I did this exact same reset and it corrected the issues. Thank you

@avinash770017 Ай бұрын

A Big Thank You. ✌Was really struggling and unable to figure out what was wrong with the printer, but your video really helped not only to identify but also to rectify it.

@amishamunda1448 3 жыл бұрын

I'm literally crying😭 Thank you for making this video!! It was really helpful.

@TopEvt 3 жыл бұрын

You're so welcome!

@oscato9580 2 жыл бұрын

Thank for the tip.

@SuperBhag 2 жыл бұрын

Thanks. Solved my problem

@emr7391 2 жыл бұрын

Yo! This works great! I followed the guide online that told me to do the light then the heavy nozzle clean (which is 2 and 3 blinks respectively) but they didn't work. I did this and it was fixed! Thanks a lot man!!

@TopEvt 2 жыл бұрын

Glad it helped!

@afsarmohamed7142 2 жыл бұрын

Thanks man! I was very worried after an error occured on the printer and it hasnt even been 1 year since purchase. I tried troubleshooting methods and none worked. However your'e method worked perfectly. Really recommend this channel

@TopEvt 2 жыл бұрын

Glad I could help

@Tassy202 5 күн бұрын

Coming back to this video every time this happens, thank you

@LucretiaRingane 2 жыл бұрын

MAGIC!!!!! It worked. I was even thinking of buying a new printer. Thank you the great content.

@TopEvt 2 жыл бұрын

You're welcome!

@L1FEOUTLOUD 28 күн бұрын

Amazing - been trying fix this problem all night. Appreciate your video - thanks mate.

@selamawitaraya2617 Жыл бұрын

Thanks, man! Was worried about having to buy a new printer. This was very helpful!

@TopEvt Жыл бұрын

You are welcome!

@pramathsingh7357 2 жыл бұрын

Thank you for the video, it was really helpful and resolved my printing issue.

@TopEvt 2 жыл бұрын

You're welcome!

@sabyasachichakraborty9213 Жыл бұрын

Thanks - This was absolutely what I was looking for.

@TopEvt Жыл бұрын

Glad it was helpful!

@riggedbynick7873 6 ай бұрын

Thank you so much - I was cursing this machine and thought it was another printer to send back... this fixed me right up!

@ruppaul6678 2 жыл бұрын

Thank you so much for this wonderful tip🙏🙏I was really worried but it worked perfectly after following your instructions.... Thanks so much bro❤️

@TopEvt 2 жыл бұрын

You are welcome 😊

@pranavjain2222 2 жыл бұрын

thank you this was extremely helpful. Saved my last minute emergency for project :)

@adriennelefaivre2228 3 жыл бұрын

Thank you for posting this, seriously, thank you!!

@TopEvt 3 жыл бұрын

You're very welcome!

@memecentral4171 2 жыл бұрын

Thanks bro just solved my printer's issue in just 11 minutes (magenta ink was not coming out ) . Now it's perfect and the quality is fine thanks bro ❤️❤️.

@TopEvt 2 жыл бұрын

Glad I could help

@tylerjones7113 2 ай бұрын

Excellent! Like you, red was not printing correctly. But this solved my problem! Thank you!

@gauliath2986 7 ай бұрын

Extremely helpful! Fixed my problem! Thank you

@nanuarora2401 Жыл бұрын

Hi Brother, Have a G1000. Couldn't use it for over a month as I wasn't well. Now there is green tint all over the prints. The test print page showed everything as fine. Did the cleaning by holding down the resume button till the main light blinks 5 times as you mentioned. No improvement. As per Canon's website the cleaning starts after the main light blinks 2 times. Again no improvement. Initiated deep cleaning from the pc but the result is now worse. What should I do? Canon guys, without even checking the printer, are suggesting to replace printheads for 6000/- :(

@Apurvrajvlogs 2 жыл бұрын

Just tried this method and it worked perfectly on my pixima 2000! thanks a lot mate! really life saver you are!

@TopEvt 2 жыл бұрын

Glad it helped

@simonmckenna4876 3 ай бұрын

Found this video perfect! Thank you, solved my problem straight away. :D

@Gghhhngbvg Жыл бұрын

This was very helpful ! It fixed my printer right up! Thank you !

@TopEvt Жыл бұрын

Glad it helped!

@deonkajacksoniloveitcanige884 2 ай бұрын

Thank You! i called Canon they told me I need to buy another printer. The Holy Spirit said that code. And I did, I got it to print, but my colors was not printing right. I found your video, I'm super excited it work. I have a Canon Pixma G3202

@elizabethdelacruz3858 2 жыл бұрын

Hello. Sorry for asking this - i have tried the steps stated on your video. But despite long press on the stop button, the other light does not blink or open. Is there a step that i am missing? Thank you

@permendrasingh8735 2 жыл бұрын

Thanks - Detected this problem & saw your video - solved it in flat 17minutes - thanks again

@TopEvt 2 жыл бұрын

Welcome. Glad it helped.

@RajatSingh-tj5cq 6 ай бұрын

Thankyou so much brother. My printer took 10 min and all problems get fixed.👍👍👍👍👍

@jcng7578 Ай бұрын

Thank you for the simple and clear instructions that works.

@linaryannphotography2333 Жыл бұрын

This is the best. Solved my problem immediately!! thank you!!! Any tips on how to prevent this from happening again?!

@kimrodriguez635 3 жыл бұрын

THANK YOU!!! Printers are such a pain!

@TopEvt 3 жыл бұрын

You're welcome!

@ritobrataghosh3628 2 ай бұрын

This actually solved my problem. Thank you, genuinely.

@christinaslaven3734 2 жыл бұрын

Does use a lot of ink but works 100% I was urgent for the color to be correct and this was amazing! So surprised this worked!

@TopEvt 2 жыл бұрын

Glad I could help!

@vksartncraft1482 3 жыл бұрын

Thanks for this video, and explanation was point to point with not much of loose talks.

@TopEvt 3 жыл бұрын

Glad it was helpful!

@JeffH6158 7 ай бұрын

Nice video. I was stumped and this fixed my issues. Thanks!

@joeltstewart 7 ай бұрын

Thank you so much! That helped.

@jyveturkie 2 жыл бұрын

My initial test page looked just like yours. This solution worked perfectly. Thank you!

@TopEvt 2 жыл бұрын

You're welcome!

@sachins9831 Жыл бұрын

Did it take some time after the fifth blink?

@Rajibranjan 3 жыл бұрын

Thanks so much! It worked like a charm!

@TopEvt 3 жыл бұрын

Glad it helped!

@tmontero8492 6 ай бұрын

thank you, sir. very helpful advice.

@OkayJee. 2 жыл бұрын

great, work for me as well, Your way is simple and accurate. Thanks a lot

@MD-no5vj Жыл бұрын

Thank You!! this was so useful

@JandEWoodworks Жыл бұрын

Do you have video of Canon Pixma ip1300 color problem too..

@ThisOLmaan Жыл бұрын

it worked man Thanks you TopEVt, the onscreen cleaning did not do nothing but this was the real deal

@tameirasmith8564 Жыл бұрын

This helped me so much! Thanks. My printer was printing crazy colors and the ink was plentiful.

@TopEvt Жыл бұрын

Glad it helped!

@YuriyTheGamer 6 ай бұрын

Thank you! This fixed the issue on my ink tank Maxify GX5050 printer. Just held the cancel button for a few seconds and it started to pump ink into the print head. All the tubes were dried up before and this process put ink from the tanks to the tubes into the print head.

@ravenmacalino6868 2 жыл бұрын

Do this tips applicable for canon g3010?

@kimberlyDMcCallister Жыл бұрын

I bought it 6 months ago but just set it up tonight..... I have used Canon printers for years and have tried deep cleaning as well as cleaning the printhead on this brand new out of the box printer! But, I can't get any of the colors to print at all! I'm at a loss! Any suggestions?

@justinechim 18 күн бұрын

it works and is the fastest way to solve printing issues. Thank you so much

@mikey200047 Ай бұрын

Awesome thanks have been trying for weeks to sort this fault out- it works a treat!

@moecheraghi8212 2 жыл бұрын

Wooooow, thanks a million 🙏 ❤ you saved me a lots of money and time .may God bless you and your family. From Canada 🇨🇦

@nonameherecu 2 жыл бұрын

👍👍👍Very Helpful Video, Thanks for Helping , My printer was not printing some colors, after watching your video, I follow the all instructions of your video, now my printer is working and printing all the colours , good work, Once again Thank u.. 🙏🙏🙏

@TopEvt 2 жыл бұрын

You're welcome!

@maryp.ducusin4516 Жыл бұрын

great help! my problem solved and money saved! thanks man!

@amitavabhaduri4351 2 жыл бұрын

Thank you very much for uploading such a wonderfull solution to this problem.I tried as shown in the video and it is working fine now.

@TopEvt 2 жыл бұрын

You're welcome!

@subhankaree 3 жыл бұрын

Thank you, in this lockdown, it was a great help, important work was stuck due to this issue..

@TopEvt 3 жыл бұрын

Glad it helped. Same thing happened to me so created the video after finding the solution.

@manpreetsingh-tt7wd 3 жыл бұрын

Thank you so much for this easy solution

@samzeroeyt.0808 11 ай бұрын

hi, I am having issues with line streaks with my Canon MG2570s. Can u help me resolve this, please?

@paimraghu 3 ай бұрын

thanks a ton buddy. this really helped me. Twice infact!!

@faridahmohdzahid1309 3 жыл бұрын

You have solved my problem. Thank you!

@TopEvt 3 жыл бұрын

Glad I could help!

@BubbleFamily Жыл бұрын

hi, what is the page numbers mean on the bottom of the check nozzle paper?

@sarithmanura7338 2 жыл бұрын

Hi can you advice me, this print out Magenta and yellow clr 2nd clr line missing, Pls help fix it

@cornerstonehealthcare5847 Жыл бұрын

Impressed with clarity , but unfortunately nothing happening in my cannon G2010 when i keep pressing stop button on printer. may be some other method for this particular model of mine ?

@carlow7864 8 ай бұрын

Thank you! Works perfectly again!

@aryansharma4253 2 жыл бұрын

Thank you very much , I thought I have to send the printer to service , u saved me a lot of money and tension . Thankyou

@helenl5397 3 жыл бұрын

Thank you for posting this! Issue fixed here thanks to you :-)

@TopEvt 3 жыл бұрын

Glad it helped!

@carlacash5393 2 жыл бұрын

Thank you! thank you! thank you! I had already changed the adsorbing pads, bled the lines to get the air out and still nothing worked. Your video was the best of any I went to.

@TopEvt 2 жыл бұрын

Glad it helped!

@cs8sz 2 жыл бұрын

You are a complete legend! All the windows tools wasn't working this did first time!!

@aadityak3061 3 жыл бұрын

Worked like a charm mate. Thank u!!

@TopEvt 3 жыл бұрын

Glad it helped

@MerabOkeyo 2 жыл бұрын

You are G for real. Thank you!!! Also, that room looks clean enough already!

@TopEvt 2 жыл бұрын

You are so welcome!

@hazminaiman5453 2 жыл бұрын

This works perfectly. Thank you very much brother. By the way I'm using G2000 and my problem turned out to be blocked ink, which was due to my printer placed inside living room that has strong air conditioner. So yeah I wouldn't suggest placing your printer inside somewhere cold.

@TopEvt 2 жыл бұрын

Glad it helped. Yes it happens during huge temperature variations.

@simoncrase5360 Жыл бұрын

Interesting. It is almost midwinter here in Aotearoa New Zealand, and the printer live in a cold room. Jamie's advice fixed my problem, but maybe the cold caused it?

@sundervudhya6900 Жыл бұрын

Thank you. This really helped me revive the missing colours on the prints.

@TopEvt Жыл бұрын

Welcome

@thomaslziegler Жыл бұрын

Good video. Your instructions were clear and it fixed my problem. Thank you.

@TopEvt Жыл бұрын

You're welcome!

@georgetadarlea Ай бұрын

Hi, I tried your method because I was having the same problem on a print test page, no magenta, and my printer is blocked now on flashes between the alarm light, the one next to the triangle, and the on light...please, what to do how to fix it?

@tameirasmith8564 Жыл бұрын

This is my second time referring to this awesome video, as it’s helped me through this pain of a printer! Lol thank you