Trying to get out as many videos as I can.

But the King will running it all day.

I've did that before when I had them with me.

Sounds like that would work.

I think you're going to like it Dylan.

how do you rate it dylan

@@adrenalinefisho869 absolutely love it mate. Won’t be purchasing another chainsaw for a long time. Would highly recommend. 9/10

Hows your saw working out thinking about getting one for slabbing

I wonder if it has anything to do with the way he starts it? He uses my gas which is 100% gasoline with Stihl Ultra 2-Cycle mix at 48-1

Thanks Timmerd888

I’ll do my best.

Good man. I have my own KZfaq channel as well. Its called Rnc Rally Pic's

I was surprised they did that. But they do hold their value pretty good.

Might have my 2021 inventory built by this fall.

Yeah he just told me the 460 isn’t running well again and The Saw Surgeon just worked on it. I think it’s how he starts the saw. Guess he’s going to borrow my 291 tomorrow as back up in case the 661 gets pinched.

Appreciate that Matt

@@JoesFirewoodVideos and I even hit the thumbs up on the commercials lol try to help a brother out any way possible

We have our ups and downs J

@@JoesFirewoodVideos That’s okay we all do. But it’s good you have each other to help each other out.

Sure is.

Looks like the PPE police 👮‍♀️ are out in full force

Lol! You need to lighten up a skosh! 😆

Brady West don’t need to take chances to get me to watch. I’ll check’em out bud!

I still run a Mac 125 old school and a homelite super xl 12 with a bow bar lol but I have some commercial saws as well but to much for fire wood

Yeah Paul I have a MS460 and it seems to be losing power lately, have had it since 2009.

@@JoesFirewoodVideos the 460 is a beautiful saw! My boss had one for years and I accidentally smashed it with a tree last year. (It doesn’t happen as often as I’m making it seem lol) But it still runs! Just needs a new fuel tank.

Bought a used one .going try it .I use 462 for most things it's best saw .out I feel .and have new 500i haven't tried yet.but 462 always gets job done..it's all about weight for me.have hernia

@@Sethhaun78 I prefer the 500i over the 462, any day! I’m using a 462 at the moment but it’s only because I smashed me 500 and they’re sold out in my area 😢 The 462 is great but the 500 is nearly the same weight but with a lot more power and it’s hard to beat that fuel injected feature. Either way, all saws involved are fantastic!

@@paul_romero_ do you have west coast felling and suspension kit with bark box and also important the green oil filter from west coast saws.IF YOUR NOT RUNNING ALL THOSE MODS On your stihl saws all of the saws then your saws are missing out on there potential..the moment i did this to all of my saws they are a complete ly different animal .my 462 runs circles around most saws even bigger ones.the filters are less maintaince,allow air flow increased 80 percent .and bark box cools it better .and helps to increase as well. The suspension kit allows to run a 32 inch bar without being floppy .or 28 or 30 inch or Oregon. Anyone who doesn't do these mods all at once on your saws is missing out bigtime.its that much better .and keeps fined out of the engine and u can run them without covers if desired. I ran mine over fixed bent handle runs like a dream..462 I mean....haven't tried my 500i yet .it's also has all of those modifications except 500i 661 u need to run max flow filters that's only difference I have it ready to go fir back up.hazent had gas in yet ..also if your not warming the saw up and recalibrating,it once in while it won't run full potential because feul filter gets dirty .this isn't a debate .it's a must to do a these things to sthil saws .I talk with mechanics daily get those on the saw. If you don't already .I wouldn't even run a stihl saw without them. That filter set up is 1000 times better .no comparison

Amen 🙏

My saw gas I go a little rich at 48:1 with the Stihl Platinum 2 cycle oil. Also I use non-ethanol 100% gasoline

He was excited to run it.

Almost too much for part time firewood guy.

Not sure about that one?

661 more torque aka real power.... 500i is all chain speed

Fuel injection

Enjoy

Catchup when you can Jake... Don’t forget that I have two channels

Full comp full chisel

Yes it’s a beast

Eventually and when I do the camera 🎥 will be rolling

Not sure about your dealer but the King’s dealer did it for him.

You won't be disappointed.

He loves it.

I told him to get skip tooth the next time he gets chains for his 25” bar.

On my 28” it still dismantled logs like they wernt there. Throw a 36” on there and the saw barley slows down! Great choice for sure!

You got that right

Because he doesn’t have the skill of me to eyeball 16” on 95% of blocks cut like I do.

Doubt it.

Sometimes no matter what you do it’s going to to pinch.

I think it was 25" bar?

Cool

He’s cutting faster than I can keep the chains sharp. The wood is piling up here so fast

@@JoesFirewoodVideos lovely! !!😆💪💪

I think so? Maybe 25”?

Yeah the 20" bar is fast

My next new saw will be 461 or 261

@@JoesFirewoodVideos The 251c with an 18" bar is pretty stellar with the ElastoStart feature. Give one a try if ya haven't already. Just remember that it don't need to be yarded on.

He did fine

Ship me a piece mate and I’ll try it.

Been flogging one for four years in NNSW and apart from the dogs rattling off and a bit of a hole in the cover after being slack cleaning it after palms and a bar that just died.. It's going good as ever. Ten out of ten.

He bought it with 25” bar.

@@JoesFirewoodVideos what bar options do you get in the USA 🇺🇸 ?

It will handle a bar that long without any problem

Yes I was trying to get the 881 it says it can hold up to 41" but they don't have any on stock. So I get these one that says up to 36" and I already have a 32" bar so I will good with that for now. I have old homelite chainsaw couple of 240 and a little red xl for the branches up to 18 inch

He’s responsible for his own safety

Too long of bar for me.

I cut a lot off old growth fir that is five feet on the but a 36 works best for me I have ran a 48 on it at times the smallest bar I own is 32

Brady West saws are not cheap I buy two a year always a 661 and anew 460

Great saw ain’t it?

@@JoesFirewoodVideos Love the ease of how it goes through hardwood like a hot knife through butter. I'm waiting on getting a 24" bar n skip chain to play with the files a bit. Like a surgeon with these things lol

@@JoesFirewoodVideos Oh. The ease of how it starts. Two minor compression pulls and hit the decompression valve... Ya. It's my SDS (Social Distancing Stihl) lol

Nah, that’s too long.

Another channel that I subscribe to just installed a bark box on his Husqvarna.

@@JoesFirewoodVideos how so

He did ok.

Joe's Firewood Videos my left side is actually weaker than my right from running a chainsaw for so long. I have to be conscious of it and try to make it somewhat equal, although unlikely. You take for granted how many hours you have on a saw when you work for production tree care/land clearing companies.

How much do they run?

@@JoesFirewoodVideos same price as 661c, I'm in new Zealand, incredible saw though.

Of course, safety first at JPF.

Yeah that’s why I wish he got a used 660.

My logging jobs on our third 661 never had electric issues with any of them .

661C ( if the description is correct) is the non M-Tronic model. I have a 661C on order too. The 661 C-M is the M-Tronic.

That’s his choice

@@JoesFirewoodVideos of course

#PPEpolice. Sometimes he wears sun glasses

That would be good video

No comparison

Yeah nah, 395 is similar.

#PPEPolice

I agree he should wear some.

He's my little brother and I can bully him if I want.

Are you the PPE police?

I ended up buying it from my brother last summer for $1200, probably paid $200 too much.

@@JoesFirewoodVideos o ok