Car Bumper Broken Plastic Tab Repair

Рет қаралды 3,347,395

5 жыл бұрын

amzn.to/3JMCW3e Soldering Work Station with Blower Gun
amzn.to/2vz0PXc Bidirectional Filament Tape (very Strong)
amzn.to/2B21m9o Hot Staple gun for Plastic Repair
In this video I show you how to rebuild a broken Plastic tab. My bumper keeps coming loose, so something needs to be done to secure it.
Help support Doublewide6 Repairs LLC by sponsoring his Patreon account
/ doublewide6
Doublewide6 Repairs LLC has a Master’s Degree in industrial technology with a specialization in Manufacturing, due to factors beyond the control of Doublewide6 Repairs LLC and anyone featured in his videos, I cannot guarantee against improper use or unauthorized modifications of this information. Doublewide6 Repairs LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of Doublewide6’ Repairs LLC's videos. Use this information at your own risk. Doublewide6 Repairs LLC recommends safe practices when working on equipment, power tools, chemicals, electronics, electrical systems, vehicles, and or with tools seen or implied in this video. Due to factors beyond the control of Doublewide6 Repairs LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Doublewide6 Repairs LLC.

Пікірлер: 663

@aromaticpillow 3 ай бұрын

This is the most effective DIY bumper tab repair I could find on KZfaq without having to buy expensive tools. I used an old, rather thick metal screen as my mesh, but your tape looks MUCH easier to use.

@marcroe2420 4 жыл бұрын

I just got a $1200 quote for my wife's 2011 Toyota Sienna bumper so this video is a lifesaver! thanks!

@WAsmellycat 8 күн бұрын

Best DIY bumper sag fix vid on YT - thank you!

@Bolek_i_Lolek 3 жыл бұрын

It's always nice to see people all over the world have good but simple solutions.

@MrMOGHammer Жыл бұрын

The Mac Giver solutions always the best.

@CANTORPASION 3 жыл бұрын

very simple and very easy to repair but many do not want to fix, I love to fix without having to pay and use what is within my reach, love this video, thank you man, 10 stars .

@mountaingrandmama Жыл бұрын

Thank you for creating this video. I came upon it by accident and it just happens that while I was washing my roommates Honda, I noticed that the bumper wasn’t properly attached. Upon further inspection, I saw that the tab was cracked. I am a 62 year young woman who has been doing things that I have never done before with the help of KZfaq! I am in the process of learning the fine art of using compounds, polishes and wax for color correction. This whole deal started while I was washing the 86 Honda to get the dirt off the windows. I was going to borrow it while my car was in the shop. The roof of the car was bleached white. I took a magic eraser to it and found out that wasn’t the paint that was bleached out but the peeling clear coat. Well 3 days later, I got it all off. I learn new things everyday. Maybe today you all learned something from me. If I can do it, you can too. Get comfortable reaching outside your comfort zone. ❤

@Rabiiid Жыл бұрын

But you then replaced the clear coat.... Right?

@SakakiDash 3 жыл бұрын

Used to work with plastic repairs, for not being a trained professional i think you did a great job,

@inkandescent3382 11 ай бұрын

Hello… @SakakiDash… some people got the touch. One question. Is there a substitution for the tape used in the video?

@aleblanc3547 5 жыл бұрын

Awesome video...this fix verses the cost of a new replacement part is astronomical, and I've seen more than one car with a bumper flapping in the breeze. Thanks Bob...you always come up with the neatest things that we can all apply to our lives.

@robertmahaney2854 3 жыл бұрын

Great video , it’s great to see people think out of the box, I instill that to me son who is a novice car restorer all the time. if you can’t find or afford a part , you invent one or invent a tool to fix or make a part. again great job! It’s very rewarding when you can do something like this regardless the size of the job. Thank you

@luvdirt 2 жыл бұрын

Epoxy a stainless steel washer on the bottom side. Grind one side of the washer flat as needed to fit.

@p8litework717 5 жыл бұрын

Great job man! You just gave me the idea to do the same on my front bumper. Keep it up! Very well explained video!

@taysinspired5787 2 жыл бұрын

Best plastic repair video!!!! I grew up having that filament tape around the house. I never thought to use it on cars... wow AWESOME!!!

@robertlee4172 Жыл бұрын

Love it when a plan comes together. I've done some unorthodox repairs on a few things around the house, like Popsicle sticks for shims on outdoor lamp fixtures, and plastic juice bottle handles for chair repairs. Some of them lasted for more than10 years.

@NewmanTractor 5 жыл бұрын

Great video brother! It's really incredible what you can do with plastic welders and filler strips ! It came out amazing! Thanks for the hack! We just did a super similar video on repairing a fiberglass bumper this week! Thanks for sharing your experience and keep em coming!

@tomm7769 3 жыл бұрын

a zip tie works great as a filler. Very strong once cooled and flexible.

@michaelmclaren1333 2 жыл бұрын

I used 8 zip ties on my sons 09 dodge avenger last year and they are still holding strong. And we live in one of the coldest and 10 feet of snow every year. The salt eats up anything it touches I will replace them before this coming winter.

@greatestytcommentator Жыл бұрын

Cheap Black DVD cases are Way good we used instead of Glass Fibre Mess... Same Solvent melts and bonds that stuff into Rock Hard Plastic base for repairs and can be easily cut and shaped!

@dougjones4987 8 ай бұрын

@@michaelmclaren1333thanks a bunch for the tip. I have do this same repair on my bumper

@michaelmclaren1333 8 ай бұрын

@@greatestytcommentator I never even thought about using those! Tyvm!

@yhuide7521 2 жыл бұрын

smart cheap fixing, thumbs up for your "easy" fix idea.

@bigBSdetector Жыл бұрын

Recently repaired my zero turn rear axle after it broke a year ago. You are my hero!!!! Could not have done it without your help! You make great videos!! Straight forward, no nonsense! Essential info and no b.s.!! Keep up the good work, man! You are legitimately helping people!!

@ivanha2885 Жыл бұрын

Hi it a good video. I like to know what is the name of that tape call and where can u buy it thank

@alanwilson2073 4 жыл бұрын

Dude, that was a totally AWESOME repair!!! I follow your line of thinking and your reasoning. Makes a lot of sense.

@MrGoosePit 5 жыл бұрын

Using that tape is a great idea. The bumper looks great, should hold pretty good!

@AllAmericanDreamChaser Жыл бұрын

I sure miss the old steel chrome bumpers! Great video! 👍

@alexhutchison4517 2 жыл бұрын

Beautiful! You made this 3 years ago, and, it came up on my YT home page, just as I needed this kind of info! Fantastic job, and, you just saved me 1-200 bucks! Thanks!

@piratepete-thetruthisforevery1 5 жыл бұрын

Great video and weld technique! I have a few plastic garden chairs I welded last year that need to be re-repaired, I'll use the mesh on them next time and it will probably be way stronger. Thumbs up! 👍🏼

@funcool32 3 жыл бұрын

I have just one criticism... sorry. Bumpers are typically made from thermoplastics such as polycarbonate, ABS, PBT, polypropylene or a combination of a couple, e.g. PC/ABS or PC/PBT alloys. A coffee cup lid is typically made from polypropylene or polystyrene. For the longest lasting bond, you should always look for the little recycle symbol printed somewhere on the inside of the bumper. It will have a number within the symbol, like a 4 or 5, and sometimes state below it the plastic... PC/PBT for instance. This is for recycling purposes, but also tells you what type of plastic your bumper is. The numbers represent a plastic, but usually if it's an alloy, it will have a number 7. I've fixed motorcycle fairings and had to order plastic alloy welding rods of exactly the same material, as this will provide the best strength, longest lasting bond. It could be that you got lucky and used a polypropylene lid on a polypropylene bumper. Good job anyway, but that is my only advice. Hope it is helpful.

@kerry9125 2 жыл бұрын

@@PeterFeltersnatch852 Sounds like you're the one who likes to criticize. He was just giving some very useful info about thermowelding alike kinds of plastics on bumpers.

@funcool32 2 жыл бұрын

@@PeterFeltersnatch852 it's not just about how good it looks. What about how long it lasts? You really are a simple man.

@kerry9125 2 жыл бұрын

@@funcool32 simple man is clearly a simple child. Don't waste your time with him.

@mountaingrandmama Жыл бұрын

@@PeterFeltersnatch852 He is just taking it to a higher level that is all. No criticism but education. Makes sense. Don’t let your ego get in the way of learning something. I do understand your motivation. Your respect for the man who created this video and did a good repair not being an expert working with plastics. So now we have an expert give us some of his wisdom bam! We are benefit for sharing. It is sweet that your respect shined thru.

@PeterFeltersnatch852 Жыл бұрын

@@kerry9125 do you always talk behind people's backs? Criticize who? Are you okay. ...

@onemat2000 4 жыл бұрын

New sub here. I have the same issue with my front bumper fascia on my Honda Fit. . Thanks for this great video. I'm going substitute JB weld for plastics for the heat melt part. I bought the car two weeks ago and the front fascia issue has been bugging me. I was first thinking of using a plastic or rubber washer but I like your use of the coffee can lid much better! Thanks!

@12341walkman 5 жыл бұрын

You are the man Bob !!! I love you video's, they have helped me many times in the past. Thank you so much for sharing your knowledge and abilities.

@doublewide6 5 жыл бұрын

No problem.

@kozmaprutkov2202 2 жыл бұрын

Thanks for sharing the video. Your method was pretty innovative and ingenuous and addition of the meshed tape to the equation definitely helped. It stabilized the plastic piece you tried to attach to the bumper, freed your other hand and made the area you tried to fix more accessible for using the soldering iron (to tack the plastic piece you made).

@JoseDiaz-er4ww 9 ай бұрын

Thank you so much!!! My car has the same at the front bumper, at first I hadn't idea how to fix it, and the workshop was more than $100 just for sticking it. I prefer your solution.

@angelajohnson-filer6202 4 жыл бұрын

Wow! I just saw this video, and you did a terrific job with that repair! Awesome job!

@suffa07 2 жыл бұрын

Awesome! And yes, the superglue/baking soda would have easily held up.

@LonaPhilosophicus 4 жыл бұрын

Have the same problem with my bumper, thank you for the good advice and creative way of problem solving.

@Mysterymeeet 5 жыл бұрын

I've been doing auto body for 26 years. This is a great job sire

@aidanjohns5989 3 жыл бұрын

It's spelt sir you dumb fuck

@kuya_akie 3 жыл бұрын

@@aidanjohns5989 "Sire" is still a correct term lmao get off youtube and go to school. You're obviously under the age of 13 if name calling and trying to correct people is what you do

@FlyyProductionss 3 жыл бұрын

@@aidanjohns5989 *spelt*

@johnrazor8720 5 жыл бұрын

My dad was an auto body repairman for over 40 years and he would have been proud to turn that out of his shop. Congrats!!!!

@doublewide6 5 жыл бұрын

Thanks that is quite a compliment.

@tessaroster9608 3 жыл бұрын

I was looking on here on how to properly remove a rear bumper to paint. My 08 Civic is in almost perfect condition except the exterior paint is chipping. In addition, both rear and front bumpers were missing clips. The previous owner backed/drove into the curb and pulled them out. I have been using a "S#!T-ton" of zip-ties...but now that I have seen this...I'm juiced to fix it without the cost/time of replacing. Thank you...THANK YOU...THANK YOU!!

@ronnietan516 3 жыл бұрын

This has been an excellant home DIY repair with available equipment. Thanks for the demo.

@Cygore Жыл бұрын

Gracias, me ayudó mucho. Saludos desde Monterrey NL México, la ciudad más importante del país. Bendiciones.

@terrylarotonda784 5 жыл бұрын

Good information Bob. Thanks for sharing.

@waltschannel7465 5 жыл бұрын

Great job. Thanks for sharing the links and advice for the materials you used!

@SpaceCadet4Jesus 5 жыл бұрын

Thank you Bob for taking the time to make this video.

@edwinoliveras8221 2 жыл бұрын

Very , very helpful video. Thank you my friend. It takes somebody really smart and creative to do something like this. I'm impressed. Thank you !! Your friend from Puerto Rico, Edwin Oliveras

@israelferja3569 Жыл бұрын

Gracias amigo saludos desde México... Excelente trabajo... Felicitaciones al camarógrafo y por supuesto a tu paciencia

@gregorypiercesr.794 2 жыл бұрын

Great job! I have fixed a handful of bumper covers and the tape is a nice addition. 👍👍

@carlospajuelo7748 4 жыл бұрын

thank you for all the details you made a great job, They should teach in the bodyshop schools.

@Penny913 4 жыл бұрын

I have the same issue with my front bumper and was thinking of reinforcing the tabs somehow and I couldn’t think of the best way to do it! Thank you for your great ideas!!!! I can’t wait to go try this on my car this weekend! I will post some pics!

@30guarino 10 ай бұрын

Well it's been 3 years and how did it go Penny?

@mijaresaldo 9 ай бұрын

Great repair! Thanks for the video. Have a 2000 Odyssey with the front bumper falling. Will try this.

@miguelaguilar68 8 ай бұрын

Excelent !!! Nice work and how to explain the process steps Thanks!!

@kujo2033 2 жыл бұрын

Professional way of doing it🏆 I usually just glue the bumper to the retainer 🤣🤣

@DennisNedryisStillAlive 3 жыл бұрын

That’s crazy. I just curbed my front bumper on my Honda Civic Si and the plastic tab on the front bumper is broken just like this. Thanks for the video man! I can only hope I can repeat your craftsmanship when trying to make this look as nice as you did lol

@TheMezzy712 5 жыл бұрын

Thanks for sharing. FYI zip ties are also great to use to melt as they come in different size and color. Cheers.

@huevosmahao 4 жыл бұрын

You have taught me something new today. Thank you. Great job.

@sungn4512 5 жыл бұрын

great permanent & weatherproof FIX for a still very functioning bumper

@rolandoortega5403 11 ай бұрын

Buen video brother, pensé que solo hacíamos esos trabajos al sur del río Bravo.

@groundleaf865 4 жыл бұрын

Great video, I will try this technique. Thank you!

@tnewin5294 3 жыл бұрын

Really learned something new from you. Amazing work. Shame on body shop work.

@freddycallo7728 Жыл бұрын

Gracias , muy amable por compartir tus conocimientos llenos de experiencia, Gracias desde Peru . Traducciones: Thank you, very kind for sharing your knowledge full of experience, Thank you from Peru

@mikeoxbig4705 5 жыл бұрын

150 "Thumbs down"? This was informative and diligently explained. Great job and thanks for sharing.

@willemstreutgers1154 5 жыл бұрын

Thumbs down might be from guys who wants to sell bumpers.

@talon1706 5 жыл бұрын

Must be the after market parts sellers. ;)

@talon1706 5 жыл бұрын

@Couch Professional Why did you care enough to comment about it?

@Scott.Farkus 5 жыл бұрын

All the thumbs downs are from "Welders" who don't how to do anything but weld and think they know everything, because they know how to weld.

@mikeymike9616 5 жыл бұрын

Awesome job, looks almost brand new!

@markdamstra 2 жыл бұрын

this guy is creative and brilliant.

@Madiateur 4 жыл бұрын

Definitely going to try this out on my civic! I have a few plastic parts hanging , and it looks awful at the moment :( I appreciate this video, because everyone else's videos on here are "Go out and buy this list of things" , meanwhile yours is "Solder plastic with mesh tape, and it holds" ! I love it! Thanks again for your video :) You got a new subscriber :)

@ljaysperspective1775 5 жыл бұрын

Very nice trick, the bumper on my 99 Ford F150 was hit and now i have the same issue. I thought of attaching a piece of plastic and using JB Weld wich also bonds very well, but ur method appears as effective. Thx for sharing the vid, very helpful IMO. Just cant run to the dealer for every little issue.

@HM_RELOADED 4 ай бұрын

Great job, mesh tape seems to work awesome

@jamespinckard4210 5 жыл бұрын

Very good job doublewide and very clearly explained as you go. Thanks.......I will be getting a roll fo that tape.

@Jose-I-Cuenca Жыл бұрын

Interesting. Thanks for teaching this way to how repair a bumper Interesante.

@ducle1616 5 ай бұрын

THANK YOU SO MUCH I LEARN A LOT FROM YOU ! PLEASE CREATE MORE

@retiredhappy466 3 жыл бұрын

Innovation at its finest. Great solution.

@michaeldimaria1090 2 жыл бұрын

nice job- looks great- be careful of those fumes!!

@charliestevens3308 3 жыл бұрын

Thank you so much for this video, I will be a hero this weekend after that tape comes in the mail. Good job!

@gregorypiercesr.2769 5 жыл бұрын

Great job using the tape to reinforce the weld. Been welding bumpers for years and it works great and saves $$$!

@yassineahssina8772 5 жыл бұрын

Hi good

@jassimal-hammadi718 5 жыл бұрын

Thank very much for sharing this idea to help us to do the repairs it’s nice of you to give your works. 👍

@normanstephens5391 9 ай бұрын

Sorry I thought I was suggesting your video to a current 2023 channel. Too much drink affecting my co ordination, Again. Great video by the way.

@user-rr3oc9rk6c Жыл бұрын

Dude. THANK YOU for this video. I took some of your info, combined it with tips from 2-3 other videos and voila! I used Permatex Black Plastic Weld, and took your tip to reinforce with plastic from a powdered creamer lid (you got coffee, I got creamer LOL) and Gorilla tape cuz I didn't have any of that fiberglass tape. Had a moment of panic when I realized I didn't mark where to drill, CRAP!! So I guessed and it turned out great anyway. Doesn't look like the bumper cover was ever torn off. I fixed my own damn bumper for $20 vs. $1,000. THANK YOU.

@WilliamImSpecialized 2 жыл бұрын

I also had a loose bumper, I used indusrial commercial clear silicone glue and its been three winters up in canada and it has not come loose.I also had somebody back into it and i was surprise it did not come loose or come off. The way i did it was i tape it with duct tape to hold the bumper up to the body and used the silcone glue and left the tape on for three days for it to cure and filled the remaing gap after i took the tape off.used cooking oil to remove the tape glue.

@lickalittle 3 жыл бұрын

Excellent job sir. I'm definitely impressed 👌 I have to repair my front bumper cover on my GMC Sierra. Broken tabs going to be harder than this but I've got a plan.

@ChutneyInc. 9 ай бұрын

thank you for sharing. i need to do this to my miata. brand new bumper 450 dollars ruined after i lowered my car. tried to use quick release tabs but couldn't get those to line up on either side. I've been considering this so again thank you for the confidence boost

@regeorge179 3 жыл бұрын

Excellent repair work thank you kindly for sharing your experience and skills 👍

@albertodarla715 3 жыл бұрын

Good job and a great fix! I have the same issue with my bumper. Watching you from Romania. Thanks for sharing.

@ph8632 3 жыл бұрын

Thumbs up my friend! I have never had to deal with this exact situation, but I am sure I will need to repair plastic the same way in the future.

@drumbyte 6 ай бұрын

Amazing how strong it turned out!

@MrCuautla2000 3 жыл бұрын

what a great video, simple but effective Thank you

@marcaliventialiventi765 4 жыл бұрын

Great ideas, I hope this works on my daughter's Subaru Impreza. She likes playing bumper tag and Subarus are notorious for push pins and they all break

@bobbyharris6099 2 жыл бұрын

Awesome job it's a very nite tasks keep showing great ideas 🇯🇲🇯🇲🇯🇲🇯🇲🗝️

@sercanerol509 5 жыл бұрын

Great affort 👏thanks so much for the video 👍

@dineshrajan8739 5 жыл бұрын

Really great information... Thanks... It's very helpful for my detailing...👍

@Bratgirlprincess 2 жыл бұрын

Loved watching this. I wish I could do this for my bumper.

@geebee7197 3 жыл бұрын

Hi just came across your video I had the same problem on the same car and on the same side a while ago I used the super glue and baking soda fix,It worked really good, I found that taking the wheel off and drilling up the hole was in the perfect spot, The way you repaired looked as if it worked real good so two ways to repair Fit bumper. Thanks

@sabergermd 5 жыл бұрын

Great job. Your videos are very helpful!

@markusgrune6841 4 жыл бұрын

Nice job with simple tools. Looks good!

@Nyck461 Жыл бұрын

Congratulations for you idea and your job. You did great and your video was very professional. I have a similar problem on my 2015 Subaru where the wheel liner joint the body of the car. I will certainly use this idea. Again, congratulations.

@theforestisdark9676 2 жыл бұрын

Amazing video it's very difficult to find videos on these little details for cars.

@zamzammrfixit3113 5 жыл бұрын

you did a fantastic , fun , incredible , funtastic , grate , excellent , propper job.

@SERVITE888 4 жыл бұрын

Awesone and thank you from Ventura, California!

@vanzmahlen8683 5 жыл бұрын

MUITO BOM ESSE VÍDEO, POR MAIS VIDEOS ASSIM, SEMPRE IMPORTANTE.

@jjparody8257 5 жыл бұрын

I have been watching your brilliant fixes for some time now. Coincidentally, I have also been exposed to the orthopedic world a good deal during the last year or so because a family member has required major joint repair. I did much video research for her before we chose a Doc & a procedure. All that to say that there is no question that you could have been a skilled surgeon had you chosen that career path.

@doublewide6 5 жыл бұрын

My wife always says that. If it wasn't for all the book work and time spent getting the degree.

@pawankumarchohan 3 жыл бұрын

Very good and neat job done by you friend. I am sure it will hold last as it appears. You are really did a great economical job for your car without wasting hard money on a new part, which sucks a big amount. Thanks and best of luck. Regards

@joesarb6455 5 жыл бұрын

I'm impressed with the result . Your bumper looks neat. Thank you Sir.

@osvankerck 4 жыл бұрын

I have the same car (honda fit) same color with the same problem in the same side... Thaks a lot from Argentina!

@VendettaJz 5 жыл бұрын

This was beyond helpful, thanks man

@Alientraveler003 5 жыл бұрын

You have a awesome Voice for teaching thanks

@BrucesShop 5 жыл бұрын

I am sure you have saved your family a lot of money through the years. Great Job. A coffee lid filler rod SWEET.

@doublewide6 5 жыл бұрын

I imagine. I should make some more of those filler strips why I still have the lid that plastic melts and spreads perfect.

@annacox5985 4 жыл бұрын

This is awesome. I'm looking for the same type of repair on my BMW 740i front bumper. Thanks

@113tidbits 2 жыл бұрын

Looks like a really good economical fix. My problem is the clips were ripped from the bumper cover. So I'm looking for a bonding agent to apply plastic on plastic to adhere bumper cover to frame.