Car Suspension: Multi-link suspension explained | Multi-link vs Double wishbone suspension (2022)

Рет қаралды 78,818

Күн бұрын

Multi-link suspension explained | How multi-link suspension works | Car suspension animation
The contents include
1) Multi-link suspension design and layout, including five-link, four-link and three-link suspension;
2) Multi-link suspension functions in the three orthogonal planes, the top, front and side view.
Top view:
The arm needs to control toe / steer and lateral compliance.
Rear view:
The arm needs to control the camber, to control how the camber changes as the wheel rebounds or drops up and down.
Side view:
The arm must transmit traction and braking loads, as well as to control caster.
3) Solid axle multi-link suspension
A variation of the same concept is the solid axle multi-link system. The solid axle multi-link system offers similar benefits but has several advantages over independent multi-links suspensions. The solid axle multi-link suspension uses the lower and uppers arm to control back and forth movement and rotation. This rotation occurs during acceleration and braking.
4) Multi-link vs Double wishbone suspension
The multi-link suspension is orthogonal that It is possible to change one parameter at a time within the suspension without affecting the entire assembly. This is a significant difference from double wishbones. For a double wishbone suspension, moving a hardpoint or changing a bushing compliance affects more than one parameter. Multilink systems are expensive and complex to design and manufacture. In addition, it is difficult to tune the multi-link geometry without a complete 3D computer-aided design analysis.
00:00 Multi-link suspension
00:24 Basic design
01:22 Multi-link layout
01:53 Five-link suspension: Top, rear and side view
02:30 Solid axle multi-link suspension
03:11 The advantage
03:45 Multi-link vs Double wishbone suspension
04:16 The disadvantage
Keywords: Car Suspension Explained | Multi-link Suspension Explained | Solid axle multi-link suspension | Car Suspension Animation
Acknowledgement:
Suspension model derived from
boynet006 from CGTrader www.cgtrader.com/boynet006
michauart from CGTrader www.cgtrader.com/michauart
dragosburian from CGTrader www.cgtrader.com/dragosburian
Music by John Yasut from Pixabay.com pixabay.com/users/john_sib-15...
🎬 Animated Engineering Channel: / @animatedengineering8571
💙 Our website: www.animated.engineering

Пікірлер: 17

@decentmodularkitchen548 2 ай бұрын

baground sound is high

@amandachen432 2 жыл бұрын

Great video! Very helpful for my project multi link suspension, keep going, more videos!

@animatedengineering8571 2 жыл бұрын

Thanks for your support. We will release more car parts videos in the future. Stay tuned for more content😃

@ramadhanisme7 2 жыл бұрын

The best and the most vulnerable

@animatedengineering8571 2 жыл бұрын

Thanks for your support. That's true, multi-link suspension is particularly susceptible to damage from improper use and does have a high failure rate😄

@hung5330 Жыл бұрын

Thanks 4 clearly clip

@animatedengineering8571 2 жыл бұрын

Multi-link suspension animation: how multi-link suspension works. Multi-link vs Double wishbone suspension Thanks for your support. If the animation was helpful, remember to give it a "thumbs up" and consider subscribing👏. Please feel free to share the video via the link kzfaq.info/get/bejne/l-CTpNyF3JOXgps.html

@etobiCRACKscorpions Жыл бұрын

Information is good but the music is far too loud and could be argued, unnecessary.

@animatedengineering8571 Жыл бұрын

Thanks for the suggestion. Sorry for the inconvenience, We have lower the volume of background music in our later videos. 😀

@tranxvillanueva1092 Жыл бұрын

What is the difference between a torsion beam and a solid axle multi-link?

@t8polestarcyan22 26 күн бұрын

I definitely prefer independent multi-link over any non-independent suspensions.

@thatcuteaxolotl4475 2 жыл бұрын

Q: can you steer a car with front ML suspension?

@animatedengineering8571 2 жыл бұрын

Hi, multi-link can be used on both the front and the rear suspensions. When used in a front suspension, it will replace the lateral arm with a tie-rod that connects the rack or steering box to the wheel hub. There isn't a single multi-link setup in industry, every car make or model may have their own design😃

@thatcuteaxolotl4475 2 жыл бұрын

@@animatedengineering8571 thank you very much!

@VeganBytes Жыл бұрын

I have multi link on my mx5 nd and I'm not a fan of it. I find that the car feels very loose and not planted to the tarmac, especially under hard acceleration. I'd much prefer a beefier setup.😊

@DripGxd_Cam 8 ай бұрын

Have you tried coilovers?

@VeganBytes 8 ай бұрын

@DripGxd_Cam I have bilsteins with eibach springs, they've helped a bit, but I know a sway bar would make the most notable difference. Coilovers are more about ride height first, then dialling in the damper settings. They're very expensive for my car, but I think the sway bar would be the better option first 👍