Carbide Circular Saw. Horizontal Machining Center & CNC Machine In Working. Ion Nitriding process

Рет қаралды 603,649

Жыл бұрын

Carbide Circular Saw. Horizontal Machining Center & CNC Machine In Working. Ion Nitriding Process
Chapter:
0:09. LINSINGER Carbide Circular Saw KSS 800
2:03. Automatic Circular Saw Machine
3:56. Small insert widths to save material
4:58. Interrupted turning
6:00. Horizontal Machining Center
6:51. Ingersoll Germany - Coolant housing
10:07. Ion (Plasma) Nitriding process
-------------------------
Credit:
Linsinger Maschinenbau GmbH
www.linsinger.com/
Shanghai Loginfly Sawing Technology Co., Ltd.
www.loginflygroup.com/
Hwacheon Asia Pacific Pte Ltd
hwacheonasia.com/
Sandvik Coromant
www.sandvik.coromant.com
Ingersoll Cutting Tools
www.ingersoll-imc.de
Ionitech Ltd.
www.ionitech.com/
-------------------------------------
X-Machines Channel
Website: www.xmachines-co.com/
Fanpage: / x-machines-10949018502...
SUBSCRIBE: bit.ly/3e8Hz7t
We would like to support all companies or people to promote their products, service, or company. If you need our support, don't hesitate to contact us via email wowtv2050@gmail.com.
If you are a copyright video owner and don't want us to use it in this video, please contact us via email wowtv2050@gmail.com. We make sure to remove your video immediately.
Thanks for your co-operation.
-------------------------------------
Disclaimer: X-Machines is not affiliated with the businesses whose products are shown in this review. Any trademarks depicted are the property of their respective owners.
---------------------------------
⚠️ Copyright Disclaimers
• We use images and content by the KZfaq Fair Use copyright guidelines
• Section 107 of the U.S. Copyright Act states: “Notwithstanding the provisions of sections 106 and 106A, the fair use of a copyrighted work, including such use by reproduction in copies or phonorecords or by any other means specified by that section, for purposes such as criticism, comment, news reporting, teaching (including multiple copies for classroom use), scholarship, or research, is not an infringement of copyright.”
• This video could contain certain copyrighted video clips, pictures, or photographs that were not specifically authorized to be used by the copyright holder(s), but which we believe in good faith are protected by federal law and the fair use doctrine for one or more of the reasons noted above.

Пікірлер: 43

@mingshili5513 Жыл бұрын

有先进的设备，刀具，有先进技术人员才能生产先进的工件和设备👍

@poly_hexamethyl Жыл бұрын

1:32 That's a really good saw, makes a beautiful clean cut. More like a milling cutter than a saw. It cuts that steel like it's aluminum.

@skipd9164 Жыл бұрын

To people that have never been in a machine shop let me tell you something. High school I was learning to be a machinist. Graduated 1980 and went to work for a once large manufacturing company. All manual machines and broken up so each type of machining was together. Building in Beverly Massachusetts was a mile long and at one time all 3 bays 3 stories high were occupied in its heyday. Company finally closed up and I went to work in a modern cnc machine shop. 82 I started and learned every thing I could. 83 went to work for GE and my final job was an Ingersoll upgraded to 7 axis CNC horz boring mill. The machining in this video in old days would of been done by multiple machines and a couple of days to final piece. 1987 I left GE and the machining trade because there was no future and manufacturing the old way would disappear. Most American manufacturing left the country and the ones that stayed were modern. It is amazing to see CNC machining and also they can inspect the work. My 7 axis were 1axis. x 40 useing floor as table +2nd axis. 15 foot rotating table beside floor that also 3rd axis. moved in and out. 4th axis. Y axis 15 ft. 5th. . Z was 12in ram with. 6th axis. 6 inch spindle and 7th axis was attachments that went on ram . This was over 40yrs ago and i forgot letter designation on some axis and my measurements are not exact but it was largest 7axis in U.S. at that time

@Skinflaps_Meatslapper Жыл бұрын

Thanks for telling me something. Not sure what I was I supposed to get out of it, but let me tell you something in return. That torture test with the square stock was nothing compared to what I could do to it. I'd make that little cutting tool cry for its mommy in a screeching and chattering white hot sparking mess, because I'd have no clue what on earth I was doing other than fiddling around with knobs and buttons to see what happens.

@vintageludwig Жыл бұрын

What's your point?

@skipd9164 Жыл бұрын

@@vintageludwig if your asking me. Very few machinist have the opportunity to operate large machines. I believe operating a machine and doing it for RD project. The high speed reduction gearing is now in operation in the destroyers. Many machinist never see machines that need overhead cranes to load big parts. That's all my comment was about.

@skipd9164 Жыл бұрын

@@Skinflaps_Meatslapper your mom let you out of the basement

@bryantburns3664 Жыл бұрын

Shut up

@sergejusvasiljevas6943 Жыл бұрын

Фантастика !!!

@THR33STEP 10 ай бұрын

Plasma nitriding??? That sounds awesome!! I wonder what would be the difference with the parts with PN compared to basic heat treating.

@klausadams1150 Жыл бұрын

TOP!

@benjaminsisko5977 Жыл бұрын

VERY IMPRESSIVE...

@edilsonmartins6653 11 ай бұрын

Muito bom.

@klarei4326 Жыл бұрын

Stahl wie Butter bearbeitet

@martinnorbeck4657 3 ай бұрын

Cutting gear blanks? Like to mike some of those to check parallel. God these machines today.

@ariomarariari5089 Жыл бұрын

isso que é perfeição.maravilhoso.lindo demais.fantástico.parabens.sucésso.blz? valeu i abraços..

@stanislav_1789 Жыл бұрын

11:53 Console captions in Russian, amazing :)

@D08048 Жыл бұрын

🧐👍👍👍💪💥💥💥

@manuel39164 Жыл бұрын

Krank Wie Schnell die Säge ist

@pon2oon Жыл бұрын

I want one!

@martinnorbeck4657 3 ай бұрын

6;14 herringbone gear? Wow

@giggling_boatswain Жыл бұрын

11:56 Menu in Russian.

@brianrigsby7900 11 ай бұрын

6:49 what’s inconnel?

@hussainabuhussain7836 Жыл бұрын

😎😎😎😎😎👍👍👍👍👍👍👍

@wandelust Жыл бұрын

No coolant was harmed during the making of this film 😂

@owen368 Жыл бұрын

If they had used coolant we would be able to see nothing but coolant.

@slondominik Жыл бұрын

"LINSINGER Carbide Circular Saw KSS 800" - a textbook example of "How NOT to design an operational cycle of a machine".

@ihamad1463 Жыл бұрын

12.57 looks like some Star Wars shit

@RichardKCollins Жыл бұрын

10:40 Gloves?

@TS-ct4sp5kh2d Жыл бұрын

Это где? Всё на русском написано

@user-nj7re8cc4l Жыл бұрын

компания "ionitech" болгарская. Выпускает оборудование в основном для российских потребителей.ООО «Уралмаш НГО Холдинг», ПАО «Калужский турбинный завод», ПАО «ГАЗ», АО «ОДК» Единственный официальный представитель в России - ООО «ИОННЫЕ ТЕХНОЛОГИИ». Потому и на русском всё меню.

@user-js1ps9uo1g Жыл бұрын

لمًا لبثوا في العذاب المهين) زز😂ووالله اعلم بمن هو امن به

@user-qi2rs5vh8u Жыл бұрын

Это станки русские, или производство в России?

@slondominik Жыл бұрын

Ты, Zек, а ты чё? Какие станки в России? У вас сейчас никаких своих станков, всё импортные! Станки? Мечта поета, у вас даже никто подшипников не делают! И будет только хуже, благадаря вашему бункерному Фуреру. "Дурак богатеет думкой", скажем тaк... ;-)

@user-nj7re8cc4l Жыл бұрын

@maestrogolitsin4150 Жыл бұрын

В России даже молотки китайские, откуда станки? 😂

@richardmirecki4919 Жыл бұрын

Dear editing team if you put white text pls don’t put white text over the also white name of the company because you can’t read it that way. Thanks for reading. Nobody

@Crsf84 Жыл бұрын

Hi Richard, I hope the now look at your vids for reference . Thanks