Get it here ➜ bit.ly/35Tn6hG Check out the huge range of cars ➜ bit.ly/3491rBs

Nice kit in my dream😂😂😂

An old school Defender body would look sick and that grill looks like its made for one.

Got one of these and really impressed with the build quality. So far working perfectly with over 50miles on it. Chassis stiffness is awesome! Ran a 4000kv on 3s through it with no issues. Currently.runs holmes 550 35t with 1080 and pitbull rock beasts, excellent machine.

I built a rig off that chassis. It is pretty sweet. Turned it all around so battery is up front. Didn't use portals just scx10 aluminum axles. Used 120amp esc sensored with like 2200kv motor. Used 240 degree 35kg servo for like a robot arm, you can turn the rates down drains less energy from the system. Its a slow moving servo, but the torque and digital coreless gives it so much control. I think i ended up buying those same drive shafts for it. Bought a 6 channel radio and receiver for it for later add-ons. The tires i already had aluminum beadlocks, metal front and rear bumper. Got a plastic transmission case with hardened steel gears. Have aluminium case on the way. Weighs 7-10 pounds. Nothing gets hot on it as far as electronics go and have yet to have a brown out do to power consumption. After it was said and done, got a VW baja bug body on sale for like $20 at hobby shop, $15 in paint, $2 in tape. The total cost of my built was less than a brand new all plastic, bone stock scx10 deadbolt. When i added it up and saw that i built another a little different with front mounted motor/transmission and mid transfer case. If your able to mount that battery up front it really makes a difference. The truck is solid! Only thing different between your vid and my truck is the axle, trans case, tires (1.9's here), shocks (120mm because im not running portals), and the power system. I would run an 1/8 scale power system or a beefy 1/10 scale system. I almost burned up a 37 turn and 55 turn 540 brushed with 60amp (120 burst) esc. If you like "crawling" as much as i got into it your gonna love that truck!.!.!

Spettacolare!!!... gran bel video!!!

Great build so far,nice video.

Great Steve..i tell the missus no more crawlers after i bought the RGT Pro and then you go and show us this...that is freakin awesome mate!!! we need to see this one on the rocks for sure-another cool vid once again ...thank you!

WOW!!!! looks like a beefy rig for sure Steve can't wait to see how it preforms on the trails/rocks thanks for sharing happy bashing my brotha

Get that beast on the rocks Steve. I want to see it perform please. Great videos as always!

That's badass

I would seriously stick a short wheel base XJ Jeep Cherokee hard body body on it as they are quite literally bulletproof And they fit literally perfect on the Scx10

I built an identical chassis bit by bit from eBay only differences are the links, portals, bumper and my chassis rails are actual SCX10 jobbies. Obviously fitted my own wheels and electronics. And dont have the diff guards on my silver axles. Havnt actually run mine yet so interested to see how it performs!

"It's like shit to a blanket" - bahahaha I'm dying.

That is a really sweet looking kit Steve 👍

I can smell the scents of the newly unboxed rubber wheels .

thanks for sharing your knowledge and experience! awesome product, and you nailed it in the assembly. I may be getting one of those in a few months. Cheers, mate!

Very nice. The slanted bumper actually goes onto the rear.

Next part please!)))

It is a great looking chassis, with that bumper its a shame no one makes the M715 Kaiser Jeep truck body.

Great chassis .. super cool .. great engineering .. love it .. how about an old Land Rover body .. I'm a Land Rover fan .. an original. keep up the good work and vids

You've got enough room to actually run a servo winch just behind your bumper mount

Waiting for part 2

you have 107k subscribers how cool is that

Wow only 400 USD. May have to get one. Cant wait to see it go👍

A proline metric body sick on that

Hey bro very sick chassis for sure! I like it a lot! And thanks for the add on facebook brother!!

Very nice set of chumpers you got there

Black Troopy body!

👑

Nice! But I wonder about the width. On an scx10, the skid plate is wider than the cross braces, so how does this line up? Does it have a narrower skid plate than standard?

Just ordered this thinking about getting a Land Rover or nice old power wagon like body👌🏼

Hey mate got a question would the 79 killer fit on that ?? Looking doing one ☝️

Sweet looking rig Steve. It's a bit pricey for right now. Although I'm thinking about it. I really do like it. Can you let me know about how heavy it is ? I think with that front bumper you are limited as to what kind of body you can use. Probably going to be a big one. Let me know. Love your vids keep rollin

Hi. I buyed two kits on rcmart, for crawling. Good chassies and good waith to it. I used two jeep cheokees bodies in hard plastic, who works well. One with a bed, other closed

That looks nice, but as a critic, i noticed that there are some countersunk holes in the carbon, i do belive that it would be good to seal the carbon before use, it looks raw.. But as always, nice video :)

Nice

that needs a proper truck body

If this was made in america it would cost $2,000. coughVanquishcough

Hi steve them props maybe zd racing props

Awesome ♥️🧡💛💚❤👍 Why would they include two front-bumpers instead of the rear-bumpers? Hmm..

Nissan 1991 GQ patrol like the one in my profile pic would look cool on there

that's a nice looking rig. so it's an aftermarket SCX10?

pinion gear was moosh aluminum, replace it with hardened steel if you want it to last.

Sweeeeeeeet!!! Man what u get for the price is unbeatable... that thing is all kinds of sexy... Cant wait to see it crawl... 👍👍

Superb chassis...love your walk thru!!!!

I've been thinking about getting this rc for a good while now. But I'm new to the crawling thing so I don't know if I want to spend that much money on a new rig

How long did it take you to receive that bad boy? Really nice and always appreciate everything you do brother. Trust your honesty man cause not a lot are real about there reviews.

👍

the second pumper is the rear pumper

Wich battery pack do i need for this crawler .

Can i have the name of the song in the intro please!?

What is the gear ratio one the axles drive shaft to hub

That looks very expensive, love all metal & carbon mix.

Are you still doing the 4 cylinder rc build

is this the super cheap one on ebay? The gears look better than the redcat gears

Dodge power wagon would look sweet

The body from that rubbish crawler from last timw would look good, tyres remind me of the Mickey Thompson Baja Claw.

What type of battery do I need to buy for this body also does it include and controller

Too pretty to scratch 😲

Have less plastic than my real LR defender

i think u can use hummer body for it and u can use the toyan v4 fs-v400a engine with water cooling and turbo charger

Put a good old reliable Landcruiser body on it , that would suit that roo bar

How about a Proline 1946 Dodge Power Wagon body?

Hey! I know this video is a little old but would you be willing to sell this truck? Thanks!

I see a price at 311.00 is it the same kit

Saya juga membeli barang ini

The smaller bumper is for the rear

Ford Raptor hard body seems to be the perfect choice.

The loop bar is the rear bar

Like shit to a blanket...lmfao.

Wher to buy full metal crawler sir

IS IT WORTHIT TO BUILD? OR JUST BUY RTR?

lc 70 series body

Old Bronco

Old ford body

Hey man what brand is that and where can get that, is it fit for my Axial scx10iii Gladiator...? I am still new in this hobby

They are still selling this 4 years later. It costs as much as a complete rtr . Shit to a blanket indeed.

Fck me sideways, I wish I had the cash for that.

First off it's a trail truck Second metal doesnt slid on rocks Third front shock is missing bottom Fourth front axle is clocked wrong Fifth front bumper wouldnt let you climb shit . Terrible junk.