PowerHobby Injora Carbon Crawler Chassis kit for SCX10 and SCX10.2

Рет қаралды 42,489

Жыл бұрын

I like it!! Soon I'll be able to give this thing a drive!! Links are below for the chassis and the rest of the truck, use them to help support Exocaged RC, Thanks!!!
Power Hobby / Injora Chassis
Ebay ebay.us/MYGcfw
Amazon amzn.to/3TSCt3U
Dixieland RC dixielandrc.ecwid.com/Powerho...
Holmes Hobbies holmeshobbies.com/motors/brus...
Flysky GT5
Amazon amzn.to/3rafrZr
Check out my new Affiliate website at www.ishop45.com I have a bunch there including Walmart, Amazon, Ebay, Amain, Horizon and more, just click the store you want, and shop as usual, thank you guys!
If you would like support Exocaged RC Directly, consider being a channel member. Cheap monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. Take a look! / @exocagedrc
Amain Hobbies bit.ly/3cHmsHX
Horizon Hobby bit.ly/3tMTCB5
ArmedAmericanSupply (Clothing)
Buck Knives bit.ly/3yCoXZK
EMP Shield bit.ly/3Q7dMPE
HenyStar (Womens Clothing) bit.ly/3y7jDw2
BeardBrand (BeardStuff) bit.ly/3xD6af8
Maui and Sons (Surf Apparel) bit.ly/3aD4Z7Q
HeadBanger Lures (Fishing) bit.ly/3MIFpvZ
Harrelson (CBD) bit.ly/3NxQBLY
Luxury Yacht Vacations me160.isrefer.com/go/differen...
Get Upside, I use this every time I fill up and just let it earn and until Christmas time and cash out. It works and once you get used to it, it’s an easy habit.
Click this link or use promo code 9H6W8 to get an extra $2.22 bonus the first time you make a purchase. upside.app.link/9H6W8
#carbon #rctruck #crawler

Пікірлер: 79

@tompendley1172 Жыл бұрын

1st time I got to see a crawler build. The motor and transmission setup is also completely new to me. Always to fun to learn new things especially in the rc world. Great video!

@mikebird8290 Жыл бұрын

Thanks for posting JOE this is a great value chase sir. Looks well made 🇬🇧🇺🇲🕊️✌🏼👍🏼

@ConditionZero76 Жыл бұрын

Great build looks awesome, I'm glad you finally fixed the rear HC link and got it turned around in the correct position, sweet build !!

@ExocagedRC Жыл бұрын

Yeah it wouldn’t fit the other way

@sargil100 Жыл бұрын

Great show

@brentlykins7281 8 ай бұрын

Thank you for a budget type LCG build. Want to try my first build but not sure how to track all the parts down and get everything to work on a budget. Don’t want to spend a bunch of money to see if I’ll like this type of rig. Thanks again sir!

@bacongl Жыл бұрын

I got this chassis and the Injora portals. I like what you did with the front upper links. I suppose I will be doing the same. RIP Lundsford*

@JT-np1op 2 ай бұрын

I built 2 of these! Used custom front links on both, run super short on one with a stealth x trans. The other I run longer front links, and 2speed with dig. Managed to push the trans far enough forward on both I managed a 59/41 weight split.

@Moggmodels23 Жыл бұрын

Brilliant video mate 👏👍

@blitzrc4713 Жыл бұрын

Love your channel and hope it grows happy Halloween 🙂

@gibsonlife573 Жыл бұрын

Man thank you Joe

@nathanstewart2018 Жыл бұрын

I put small springs on either end of my inner driveshaft to keep it centered but still allow for flex.

@jimbo4203 Жыл бұрын

I liked what you did with the front links

@ExocagedRC Жыл бұрын

Yeah I did not like the way they had it.

@Scale-Crawler-Xray-RC Жыл бұрын

Thanks , very interesting 🤔🤔🤔 Have a nice day ✋✋✋✋

@rc-daily Жыл бұрын

I can't wait to see this chassis on the rocks. I've been thinking about buying one myself

@JustCallMePCra Жыл бұрын

Looks like a sweet piece of kit. Makes me wish I was into crawlers.

@mikep.9338 Жыл бұрын

Ain't it past your bedtime

@rc-daily Жыл бұрын

@@mikep.9338 yes. Yes it is

@rc-daily Жыл бұрын

@@JustCallMePCra you ain't into crawlers?! Whattttt

@JustCallMePCra Жыл бұрын

@@rc-daily no not really... I love bashing and speed... purposely going slow and such is not in my veins... I have grown to appreciate the science and setup behind some good ones but overall I'd pass all-day

@wrc_adventurehobby5242 Жыл бұрын

Nice video 👍🏻

@engineerdan9633 Жыл бұрын

I also have the injora carbon kit and the LCG trans plus the Injora short metal driveshafts. It will be on the injora metal portals axles that i have. I used the "Z" links in the front but by placing them outside of the axle lugs, the binding went away and i get full movement. the other ends are outside of the frame still. If they don't work out i will try your method

@areadierc2803 Жыл бұрын

Brilliant chassis , recommend them highly, recently built one on capra axles, made my own shorter upper front links. It Works so well i Decided to sell my gspeed gshot chassis.

@chrisfree6372 Жыл бұрын

what was the Main advantage that you saw in the Real world ?

@areadierc2803 Жыл бұрын

Main differences was in climbing ,the foward chassis weight bias helps alot and belly clearance was more with same length shocks and weight of the chassis overall was less . Running 324mm wheelbase , not quite as long as the gshot.

@mishmasta Жыл бұрын

Dlux and Exo make cut to length driveshafts that work great for skid-forward chassis. While you are at it check out Exo's El Capitan rails.

@mikep.9338 Жыл бұрын

Nice👍🏾👍🏾👍🏾👍🏾

@killerinstink9260 Жыл бұрын

Lovely build Exo! Whats the lenght of the front upper links you swapped into the build? Its amazing to se the performance of this kit in your later video's 😃

@jibbyrra033 Жыл бұрын

Nice…

@ajustice2010 Жыл бұрын

Super curious on that motor !!!

@richardgoff7678 Жыл бұрын

When I built this chassis, I posted some pics and I got told that I had the rear lower links on the wrong way round (same way you have them here and the way that Injora show them on their website). I’m relatively new to the crawler game and this advice was from a seasoned LCG rig builder, so I took their word for it and switched em round. The argument was that with the bend right behind the skid plate, it creates an unnecessary hang up point. Also, after looking at lots of other high clearance links, they do all seem to sit with the kink nearer the axle end. You’ve obviously been doing this for a long time and are very knowledgeable, so I’m curious to know what you think about this? Did Injora get it wrong and have people who bought this chassis got it set up wrong as a consequence?

@sjoerddejonge4080 Жыл бұрын

I got the same only the S angled links are rubbing they need some extra bending when mounting ar 45 portal axles

@Bushwackerinpa 10 ай бұрын

where did you get the upper front links from?

@old-rcplane-phart Жыл бұрын

👍😁

@knoxbros 11 ай бұрын

Did u keep the plastic rear drive line?

@Webb4RC Ай бұрын

What size shocks you running? Also will I have any issues installing the hobbywing fusion se will it fit?

@RuisRcAdventures Жыл бұрын

One day i'll take the plunge and build a crawler from scratch. Good work Joe 👌👏

@dezfan Жыл бұрын

Just ordered that chassis for a 10.2 that I too got on sale from A-Main. 🤣. What length are the front upper links you ended up using? I’ll get some on the way, hopefully they’ll arrive about the same time as the chassis kit. 😮

@Honoluluairsoft Жыл бұрын

I know this is a pretty old video but any chance we can get a measurement on that front and rear driveshaft this kit has me interested in trying to build one I’d like to see if I can buy some driveshafts first though

@RobKingRC Жыл бұрын

Where can I get the small links like you used for the front? Thanks Joe for the cool videos!

@knoxbros 11 ай бұрын

This is rad I just bought this chassis and a spare time hobbies kit to build up thanks for the video. what motor was that?

@killerinstink9260 Жыл бұрын

Hello,nother quality video 🙂 Do you know if this chassis can fit 550 size motor like the Fusion Pro?

@michaelrichardson3899 Жыл бұрын

Which chassis do you like better the injora or the dirty south chassis ?

@ericsmith3317 Жыл бұрын

I have one otw ! How long is that front drive shaft Joe ? 60mm - 65mm?

@aaronwilliams323 Жыл бұрын

Will a Capra skid fit this kit?

@AnthonySvt_ Жыл бұрын

Would this work with Scx10.3 portals?

@blakedenley3792 Жыл бұрын

Whats that IFS build behind you at the end of the video?

@dustinluster7636 Жыл бұрын

I'm about to build this in a similar way but with scx10 III portals do you know roughly how long the drive shafts are

@mtrrc85 6 ай бұрын

What size motor did you using there

@Webb4RC 2 ай бұрын

I’m gonna get this kit. For the motor I’m gonna use the HobbyWing Fusion SE 1800kv Also I have some injora drive shafts but they aren’t gonna be long enough I don’t think. What size drive shafts do I need for front and rear?

@vbspeed7571 Жыл бұрын

😊✌️

@billmyers8409 Жыл бұрын

Hi Exo. Do u think this chassis would work on a 10.2 RTR ? Thanks. Bill

@crawlerdan Жыл бұрын

Sweet build!! Just ordered one after seeing yours. Would you mind measuring the rough length of the rear driveshaft pin to pin? Would.be much appreciated. Top work.

@ExocagedRC Жыл бұрын

Good question I’m not home to do that right now. Email me at exocagedrc@yahoo.com to remind me this evening.

@GhostRider-ii7tz Жыл бұрын

I have the same chassis I built.with the 10.2

@mrbejohn Жыл бұрын

Hello , I have élément etco , I want buy new shock , but I don’t know which one ???

@goreyboggs Жыл бұрын

What Servo is that?

@muriakoi1554 Жыл бұрын

can i have the link to buy the body?

@dannichols7131 7 ай бұрын

Hey I am having trouble with my front upper links. I’ve been working on piecing some together. Was wondering what length center piece and ends you used on yours?

@ExocagedRC 7 ай бұрын

I have a bin of random links and ends. I had to make some work on this as well.

@Webb4RC 2 ай бұрын

By looking at 8:23 I don’t think my HobbyWing Se is gonna fit, probably be to long🙁

@gibsonlife573 Жыл бұрын

What transmission is at on a snub nose

@metomwhou 7 ай бұрын

I know this is an old video but how much run time do you get from 650 or even 500mah batteries?

@ExocagedRC 7 ай бұрын

Depends on how I’m driving. Could be 25-30 minutes or 5-10 depending on the terrain and how much OD/UD it has.

@cameronblasco7334 Жыл бұрын

Superlight V3??

@_jay_376 Жыл бұрын

I want that purple revolver! How much??? Lol

@dustindavis6392 4 ай бұрын

how long are those front links you made??

@ExocagedRC 4 ай бұрын

hmm good question, I don't have the truck here but they were kinda short

$@dirtysoufracing6029$

@dirtysoufracing6029 Жыл бұрын

Need them vitavon driveshafts for my smt10?? Joe let me know

@philipfrauts1637 Жыл бұрын

I would like one too .

@samloveelvis Жыл бұрын

I think you got the rear lower links direction wrong. The bent should be closer to the trans.

@Hardlines_FullsendRc Жыл бұрын

Peep the customer tube chassis IFS bouncer at the end🧐🧐🧐😳😳😳😎😎😎

@brettwallick4885 Жыл бұрын

Sould get a flat skin for that

@craigengelman4534 Жыл бұрын

wow cant belive you got this .... told you all for 53 bucks its a awsome kit ! its injora not power hobby

@stompindakka3222 Жыл бұрын

Do even 1:1 vehicles get full shock compression? Like this 1/10 kit gets. Why not try out the front links before switching them rodends don't stick out that far?