Carnage - The Trolvo is a Beast on the Dyno

No video

Carnage - The Trolvo is a Beast on the Dyno - Biggest Power Gain Ever!

Рет қаралды 25,808

Күн бұрын

With a fresh Toyota 1.5jz engine (1jz head on 2jz bottom end) our sleeper Volvo 240 makes more power than the new Lamborghini Revuelto, and according to the performance calculators it should go mid-to-low 9s on the quarter mile.
Street Machine Carnage is all about having fun with cars. Sometimes it's serious performance, sometimes it's crazy fun, but it always interesting and done on a budget.
If you wish to send the Carnage team fan mail, mail to:
Street Machine Carnage
Unit 9/3-5 Gilda Ct, Mulgrave VIC 3170
Subscribe to Street Machine for V8-powered good times
secure.whichca....
Street Machine is Australia’s number-one modified car magazine, bringing V8 and six-cylinder powered good times since 1981.
We live for tough street cars, and the guys and girls who use them. Our channel features event coverage from all over Australia, including burnouts, drag racing, dyno competitions, show ’n’ shines and high-quality technical videos.
So follow along as we bring the magazine to life, and remember to check back regularly for new videos. www.streetmachine.com.au
Sign up to our free newsletter: www.whichcar.c....
Facebook | streetma...
Twitter | / streetmachine1
Instagram | / streetmachinemag
TikTok / streetmachinemag
Join the conversation: #streetmachinemag #streetmachinetv

Пікірлер: 159

@vlt873 Жыл бұрын

Street Machine of the past wouldn't dream of even acknowledging Japanese engines as being legit and turbos were a dark art. Scotty can take a lot of credit for highlighting power plants other than pushrod V8s and moving the focus from unattainable shed ornaments to more realistic cars that the average bloke can attain. The Trolvo is awesome bang for buck.

@zeropaloobatheuber1572 Жыл бұрын

There was a time in living memory (1970s and 80s) when big displacement was the only way to get more air into the combustion chamber. Turbos have removed that limit. Now bottom end strength is the limiting factor. V engines are problematic because main bearing bolts are not aligned with the direction of piston travel making them a weak point that inline and flat motors don’t suffer from.

@ke70gt18 Жыл бұрын

I had a street machine magazine from 88-89 that was praising the Toyota twin cam turbo engines such as the 1g-gte and 7m-gte in the same article it also said that if Toyota kept improving these engines that they could out perform the v8s, this was written before the 2jz was built the article literally reads like a prophecy

@stevessaws3612 Жыл бұрын

Can't you hear the sounds of the cars of the future? Little bubbles and love hearts coming out of the battery vents. Chain slap on motor bikes.....

@princesssolace4337 Жыл бұрын

Not for people in Malaysia/Thailand. It's regularly find its way in Volvos, BMW, Merc and Jaguar bcoz once the oem motor is broken, it's easier and cheaper to plonk in a 1j/2j/rb20/rb26. It's been around since late 80s. It's just Europeans have zero clue about what's going on outside their velvet fog

@mahcooharper9577 Жыл бұрын

Well done Scotty, can see how proud he is that what he built is doing that. Good effort m9, looking forward to seeing what it runs.

@terjejohnsen3651 Жыл бұрын

Really good numbers on the Dyno. Better map sensor and bigger turbo is the limiter now. Looking forward to see how it perform on the strip. Good work Scotty.

@bobroberts2371 Жыл бұрын

Oil pump. I'd be comparing pump gear size between NA and Turbo, I'm betting the turbo pump has a larger gear set. On most pumps, regardless of engine, the pressure relief can't flow enough volume, this leads to high pressure when cold. With such a high oil pressure when cold, let the engine warm up before running it hard as too high an oil pressure can lead to bearing damage. Babbit bearings will " channel " as in blow babbit off the bearing shell. I've done this on a Ford Kent when my race group was called early / last minute and everyone was scrambling with no warm up time. For reference on the Kent with a single stage dry sump, typical cold idle oil pressure was over 60 PSI , way higher at 5,000 RPM. Hot at 5,000 RPM was 20 PSI and hot off the track idle Zero. For a race motor wanting minimal pump losses, this was just fine.

@krispykruzer Жыл бұрын

Genuinely happy for you mate, it was a wild ride and you got there eventually. Enjoy the new horsetorques

@andrewtaylor9615 Жыл бұрын

The 240 has come a long way. Well done!

@colinmiles9390 Жыл бұрын

Man this car is going to show everyone up, never thought it would do those numbers but let’s see what it can do on the track. Bets are up boys!!! Good work Scotty and I hope the hand is feeling better.

@paulcoote3094 Жыл бұрын

Wow!!!!! That's massive mate. Gotta be over the moon. Huge power. You deserve a payrise.

@TheCluelessEnthusiast Жыл бұрын

I love sleepers like this

@rossermatthew Жыл бұрын

Nice engine build Scotty !! That thing has 800 in it for sure, with the right setup. Congrats !!

@jimclarke1108 Жыл бұрын

Great work Scotty, credit to you for all of it🚔

@CRFLAus Жыл бұрын

I love the way the Trolvo stands up and twists banging out huge HP. You do a great job Scotty!

@danieljohnson1100 Жыл бұрын

Awesome work mate

@CliffB5A4 Жыл бұрын

Tuners always look like a t-rex when they are clicking away at the laptop. 😂

@Twenty_Six_Hundred Жыл бұрын

That power curve looks minty! Gonna be a fun car to drive

@johndb1224 Жыл бұрын

Brilliant, look forward to the run at the drags

@DodgyBrothersEngineering Жыл бұрын

Ahh yes I remember maxing out the 3 bar map sensor too. Think the highest the Haltech log recorded was 29.6psi. Some really good numbers there Scotty, now let's see you have some fun with it.

@davidvincent2838 Жыл бұрын

Has anyone else though that Zane has a bit of the Benny's about him..... As in Benny from Ben's custom work otherwise known as mechnic Stig 😂😂😂

@chuxshed587 Жыл бұрын

Nice work, mate! Easy low 9’s

@stevezurek7281 Жыл бұрын

Well done Scotty PB .I wouldn’t be surprised if this twist the chassisLOL.Have fun sending it 🇦🇺👍👍

@jasondaley6723 Жыл бұрын

Mate another episode choc full that Trolvo has had incantations to be running in the 9s easy Scotty keep up the good work

@rickfletcher8422 Жыл бұрын

Good job Scotty!!

@derranged28 Жыл бұрын

Nice. I cannot wait to see what it does at the track.

@baikal4784 Жыл бұрын

Far out scotty ! Thats epic hp! Love the vids!

@akriminal7951 Жыл бұрын

You've done really well, can't wait to see it launch and go down the track, your a beast,I had no doubt in my mind that the engine going to bad ass

@crum086 Жыл бұрын

I'm sure I was reading on the Haltech group that the internal map sensor in the elites are now rated to 4bar when using NSP firmware

@bruceyblowback8748 Жыл бұрын

Love ya work Scotty awesome journey.

@stevev7696 Жыл бұрын

Keep it Scotty! Credit to you mate. Absolute power house

@mickc8738 Жыл бұрын

Very nice mate👍 can't wait to see the trolvo back at Heathcote doing some pulls

@seanstockford5847 Жыл бұрын

That nuts for a Volvo, Great Job Scotty

@jc7654 Жыл бұрын

great job and result 👍

@madmick3794 Жыл бұрын

Fan-bloody-tastic. Great work by all as usual.

@plumbs7199 Жыл бұрын

Congratulations Scotty and team !

@HazeyAuto Жыл бұрын

I know it’s borderline impossible now, but that would make a fun little street car!

@STREETMACHINETV Жыл бұрын

We could but the car would have to get alot more views to make the effort

@gazza116 Жыл бұрын

well done scotty.

@big35078 Жыл бұрын

Nice work mate it will be a ripper

@michaelteasdale2919 Жыл бұрын

I love how it comes on power straight away, super flat power curve 👌

@The_Performance_Laboratory Жыл бұрын

Those are 6 angry holes! Great job Scotty.

@STREETMACHINETV Жыл бұрын

Thanks 👍

@5533851 Жыл бұрын

Insane! The JZ series really is like a poor pans V12 in terms of smoothness and grunt, but much more $$ and config friendly.

@smithy2 Жыл бұрын

488 killer wasps, she's gona fly, good stuff 🤙

@sterlingwilkey2124 Жыл бұрын

Holy smokes scotty that is awesome 654hp

@SF-racing1 Жыл бұрын

Awesome work scotty

@kermitmotorsports6682 Жыл бұрын

Sound awesome

@tony66au Жыл бұрын

YUUUUUUSSSSSSSSSSSSSSSSSSSSSSSS! Well done Boys!

@blakamin Жыл бұрын

Well done Scotty!

@princesssolace4337 Жыл бұрын

My gudness , people in Malaysia/Thailand been doing 2j/RB swap since the Supra/Skyline scrap has been available in mid late 90s. Sincevlate 80s they even got 1j/RB20 in a Merc/BMW/Jaguar XJ bcoz its practicaly cheaper to run and maintain. It got nothing to do with power increased at all. Its 100% for reliability.

@nickrynenberg4364 Жыл бұрын

Wow I reckon that engine wanted to do more, great result Scotty!

@STREETMACHINETV Жыл бұрын

I reckon it did

@paule4204 Жыл бұрын

The zztops dyno session

@lukeya1983 Жыл бұрын

Exceptional result

@mickdejager3910 Жыл бұрын

Well done mate 👍

@stephensim5839 Жыл бұрын

I can't believe that's on stock rods etc. You are brave men, I would be so worried about a rod coming through the block.

@STREETMACHINETV Жыл бұрын

Apparently they can handle a whole lot more

@michaelb5330 Жыл бұрын

Awsum scotty FYI (never leave a car with e85 in it sitting it can or will eventually crystallise in the lines and injectors) run or leave some other petroleum fuel to leave plenty for f other KZfaq channels show this occurred to them and the extra work Cheers Scotty I look forward to seeing you do some serious times in this car

@nathanpeachs2704 Жыл бұрын

Just finished work perfect timing 😁🇭🇲 ❤

@rockbiterhd Жыл бұрын

Well done held together no worries

@someyoungguy6990 Жыл бұрын

Scotty, if I give you some 2gr-fe parts do you think you can "throw" them together in the shed...? You would have to be proud of your effort, to make it past first start and tuning is no small task with good numbers.

@timaustin110 Жыл бұрын

It's goin to be a monster at the track

@manuelstarr3602 Жыл бұрын

Surely thats worth a beer? 🍺🍺

@mrskylinegtt Жыл бұрын

That thing should be nasty down the quatre mate!

@jamesbaylis9438 Жыл бұрын

I wonder how long the start wheelie is gonna be now, good luck and can't wait for some 9's.

@STREETMACHINETV Жыл бұрын

It's already run 9s, it'll be low 9s now

@3800TURBO Жыл бұрын

Nice work Scotty. Wait till you turbo the Mang, it'll make that power at 20psi. 😉

@STREETMACHINETV Жыл бұрын

Haha

@3800TURBO Жыл бұрын

@STREETMACHINETV I ain't kidding lol.

@Doc_in_the_carpet_truck Жыл бұрын

Love Good Friday new Carnage fresh off the press and is stout after watching that top work Scotty!!!👍🍻 How much would you have to throw at it to get it engineered on club reg for a drag challenge car??

@STREETMACHINETV Жыл бұрын

Not sure really

@bry40l Жыл бұрын

Thats a spicy meatball

@justinfargas2367 Жыл бұрын

No wonder Zanes always pulling his hair out with dyno clients. All the little things that are not right, like old E85, he needs to become a mind reader to deal with dyno customers. Anyways, i can't wait to see you run at Heathcote or Calder. Nice work El Scotto.

@STREETMACHINETV Жыл бұрын

Yeah, I was a little embarrassed but that the sort of stuff he has to deal with constantly

@someyoungguy6990 Жыл бұрын

@@STREETMACHINETV Shit happens mate! I think everyone has done something like that at least once. I do believe they call it a brain fart for good reasons!!

@MrHC1983 Жыл бұрын

Nice

@honestpat7789 Жыл бұрын

Happy Easter, Scotty Great results on the Trolvo. Is it possibly the fastest Volvo in the country?

@EricaMTB Жыл бұрын

The 3-53 Detroit would do that. Well almost. But sound better.

@undy22 Жыл бұрын

that's dam impressive

@chrisobrien9334 Жыл бұрын

Yea Yea AWESOME Yea. I guess that sums it up

@gavinb9627 Жыл бұрын

It seems the spanner twirler has a very good grasp of engine building. We could have claimed the mazda's barra was a fluke, but to back it up with this deserves credit. It was nice to see the dyno-cell floor stay as clean as when you started too. Well done Scotty, we will watch with anticipation of an 8

@aaronm8694 Жыл бұрын

Oh man I cant watch this. Makes me want to spend money. I had a 1.5 in my old soarer, it was an import motor and full of HKS goodies. I think slotting one in an old C126 Mercedes coupe would be a fun ride. 380SEC's are cheap and plentiful and came with a pox motor not worth owning. You done really well mate. I hope you're proud of those figures.

@shaneortega7092 Жыл бұрын

Its gonna need a wheelie bar hehe

@benni727 Жыл бұрын

slappers are good

@anthonywhelan8373 Жыл бұрын

Pull the ecu out and send back to haltech to upgrade they’ve just started to put in 5bar internal map sensors

@mattangrave8478 Жыл бұрын

At the hubs mate 😅

@STREETMACHINETV Жыл бұрын

Same same

@mymidschoollife8485 Жыл бұрын

Oh my god :D it's eeeeeevil !

@TheTigerQuoll Жыл бұрын

Here's hoping you squeeze into the eights in the flying Lego block.

@isuzu_bryan Жыл бұрын

If its sounds this good on video can only imagine how good would sound in real life #eargasm

@GarageItYourself Жыл бұрын

And I bet the entire engine cost less than the $10K Motive Video said just the block and machining costs on a 1000HP RB30 😳What a feeling getting such great numbers on a home built, small-ish budget engine 👍

@STREETMACHINETV Жыл бұрын

Less than $5k

@troyburgess8199 Жыл бұрын

Nice work scotty, how much torque did she make ?

@thecookeman Жыл бұрын

Well over 500kw with a manual. Gonna be a weapon of a flying brick

@TaunusMicha Жыл бұрын

Sometimes a little bit extra size does matter... 😂

@dvs245ap6 Жыл бұрын

Good stuff mate, what timing did you have in it at 30 psi?

@STREETMACHINETV Жыл бұрын

That's Zane's department, I don't ask nor question

@Low760 Жыл бұрын

Great work! I hope the lines aren't rubber with e85 in then for 7 month's!

@STREETMACHINETV Жыл бұрын

They're E85 compatible

@anthonywhelan8373 Жыл бұрын

@@STREETMACHINETV pull those fuel lines off and replace with Teflon lined hoses I seen so called e85 lines degrade in 12 months and become a sprinkler nothing is made to last nowadays and last thing you want is to rebuild the entire setup due to a peice of rubber

@barrythomas6429 Жыл бұрын

The video title sort of gives away the results of the dyno run.

@STREETMACHINETV Жыл бұрын

But not the figure

@seanb250 Жыл бұрын

Fantastic result 👌 Does it rpm harder than before? as I’m genuinely surprised it made so much more peak power than before. Well done guys 👍

@STREETMACHINETV Жыл бұрын

It's got more in it too. As for rpm we'll see what it likes on the track. In theory the longer stroke should not rev as hard but we'll see how it goes

@seanb250 Жыл бұрын

@@STREETMACHINETV so on the dyno did you ever see the peak power rpm point for the 1jz or did you guys get off it before then?

@rolandocantero4044 4 ай бұрын

greetings, what gasoline was used for those numbers ?

@STREETMACHINETV 4 ай бұрын

E85 from the pump

@bloodreighn Жыл бұрын

Hey Scotty, ya reckon moving to Victoria from NZ is worth while??

@STREETMACHINETV Жыл бұрын

That a question for Zane, he's a Kiwi

@bloodreighn Жыл бұрын

@@STREETMACHINETV garn then get Zane onto it, I've got a job offer in Laverton and I'm sitting in Melton at a mates house but I just dunno if it's worth it ( same Job and same money)

@STREETMACHINETV Жыл бұрын

@@bloodreighn depends on cost of living and all that I reckon. I'll ask Zane

@trentcrompton9527 Жыл бұрын

👍

@guyharrison909 Жыл бұрын

It's doing that at only 5600rpm, will it rev much over 6000rpm? This isn't a criticism just an observation. Even that highish tech motor doesn't need to scream, boost is the great leveler.

@gogetem188 Жыл бұрын

HI AL;L Well scottie glad that's over MX5 please lol just doesn't do it for me maybe if i was 75 with a flannel white dad hat but yes im impressed with 650 that's no joke better on the AUTOBARN lol

@STREETMACHINETV Жыл бұрын

MX5 will return soon

@michaelteasdale2919 Жыл бұрын

Scotty what gearbox is in it? I wanted to put a SBC in my HR Maybe this is the way to go!?!

@STREETMACHINETV Жыл бұрын

Turbo 400