No video
Carnage - Trolvo Gets a New Turbo!
Рет қаралды 20,595
Күн бұрынOur 1JZ swapped Volvo runs 10s, but that's not quick enough for us so we're fitting a new Pulsar G35 1050 turbo to put it into the nine-second zone.
Subscribe to Street Machine for V8-powered good times
secure.whichca....
Street Machine is Australia’s number-one modified car magazine, bringing V8-powered good times since 1981.
We live for tough street cars, and the guys and girls who use them. Our channel features event coverage from all over Australia, including burnouts, drag racing, dyno competitions, show ’n’ shines and high-quality technical videos.
So follow along as we bring the magazine to life, and remember to check back regularly for new videos. www.streetmachine.com.au
Sign up to our free newsletter: www.whichcar.c....
Facebook | streetma...
Twitter | / streetmachine1
Instagram | / streetmachinemag
TikTok / streetmachinemag
Join the conversation: #streetmachinemag #streetmachinetv
@jamesbaylis9438 2 жыл бұрын
What great way to see the start of a Friday, seeing the Trolvo getting some more boosty noise. 9's are a coming.
@Brock_Landers 2 жыл бұрын
I was about to say that it's crazy that you're running a bone stock 1JZ and are hoping to make 600+ whp, but I made 412 whp reliably on a bone stock (with head studs and a Cometic head gasket) Honda 1.8L DOHC non-VTEC B18B1. I had only done a stock rebuild on it with OEM NPR rings, and ACL Race rod and main bearings with a stone honing. The stock PR4 internals held 15 psi from a Turbonetics 60-1 with no issues...and that was on 93 octane pump gas! I'll be excited to see what this old girl can make on 2.5L and that good sized G35 turbo. You gotta love those new G series turbos, they're just the best.
@BEYTEK 2 жыл бұрын
thanks for buy ing one of our turbos
@terrytsagatzones3132 2 жыл бұрын
Another awesome video scotty Bigger turbo cant wait to see what it makes on the dyno👍
@edwardmolloy7548 2 жыл бұрын
I'm thinking you seen Kyle & Cleetus playing with all of the Titanium & needed to join in. 🙃 Need Telf to race you in the Trolvo vs the MX5.
@jenibond 2 жыл бұрын
Cold scotty ? its summer here in North of Uk and it's only 9C !!!!! and thunder lighting !!!
@st170ish 2 жыл бұрын
He he he... Swedish bessa brick pulling 9's
@gileshamilton4462 2 жыл бұрын
The Trolvo is freeking mint !!
@CliffB5A4 2 жыл бұрын
Probably a good thing it didn't start strait away so it had time to get some oil through the turbo. 👍
@golfr600 2 жыл бұрын
Just seen this episode with the new turbo on the 1 JZ was good and informative thanks Scotty your doing a great job love watching your vids.
@philgrimsey3637 2 жыл бұрын
The last turbo Volvo I worked on was a V70. Wish the turbo change was as easy on that. Can't wait to see the results of this swap 👍
@richardholdener1727 2 жыл бұрын
Hey Mate-if you use a heavy steel nut and string instead of the wire on the rag-it just drop right through to the other side-then just pull it through to clean.
@STREETMACHINETV 2 жыл бұрын
Yeah, thanks for the tip Richard. Unfortunately I didn't have any string in the workshop. This was one of those quick "grab what works" moments. I love that you're not just watching the V6 "Supermang videos". Have a great day.
@danjones2913 2 жыл бұрын
My favourite car in the fleet. I’ve got a 240 wagon and this keeps me motivated to keep working on mine. Love a Swedish sled, this has been an awesome build to follow!
@frankmcgorman962 2 жыл бұрын
Cor! Luvely noise that! Now, time to stiffen up that rear end (if you haven't done that already, I can't recall) and then, add as much lightness as possible.
@georgehatzi6625 2 жыл бұрын
wow well done Scotty great job..
@robvegas9354 2 жыл бұрын
Awesome work!!!
@pauliusgruodis137 2 жыл бұрын
Nine second brick! Sounds insane and I love it!
@vanderdander8112 2 жыл бұрын
Scotty making all his cars run 9s, Insane!!
@mysticgreg 2 жыл бұрын
Next episode... the Barina - will it run 9s? 😆
@Devastator0 2 жыл бұрын
Great video as always Scotty! Love your work! Also congrats on the 150K subs mate! Keep up the good work & content!
@lukeya1983 2 жыл бұрын
Let's get this Volvo humming Exciting
@leroybrown6946 2 жыл бұрын
Top work Scotty, That is the same turbo I'll be running with my BARRA in my Ford falcon EF
@benvanbaak 2 жыл бұрын
Love the trolvo content as always. Question: Are you doing any track day related builds in the future? maybe something jdm or euro?
@STREETMACHINETV 2 жыл бұрын
We'll see what budget allows in the future
@TheNuggetProject 2 жыл бұрын
@@STREETMACHINETV I know someone who could drive it for you :D
@tturi2 2 жыл бұрын
@@STREETMACHINETV diy super budget v8 supercar, holden vs ford
@rcwp8110 2 жыл бұрын
Living the dream scotty👌
@grahamsenini8024 2 жыл бұрын
Bigger turbo, Cleetus would be proud, Scotty.
@STREETMACHINETV 2 жыл бұрын
Unfortunately I didn't score a bigger turbo from Cleetus, but I did try
@hespie1 2 жыл бұрын
Bets are on! 607hp😀
@grantlister 2 жыл бұрын
Hey Scotty, “Time to lube up!” Is that what She said? Can’t believe you didn’t say it! 😂
@andrewtaylor9615 2 жыл бұрын
Aerospace parts do look amazing Scott. Two cars in the 9's soon!
@tturi2 2 жыл бұрын
Started getting all the stock barra turbo parts for my ef xr6, basically going to copy the Au xr6 you did, except with a haltech, all used parts minus the 6boost adapter flange, water and oil lines and exhaust as they will need to be sohc/ef specific, I'm going to try and beat supermangs 1/4 mile time, then call it a win lol
@Krandorf 2 жыл бұрын
The dad jokes real on his one… keep them coming….
@tony66au 2 жыл бұрын
Just a heads up on the coolant pressure Scotty, That Green cap holds 1.5 Bar soooo the cooling system is sealed tighter than a mermaids freckle. The Grey cap runs .75 bar from memory and its what should be OE on an earlier 240 and more likely to vent to atmos.
@STREETMACHINETV 2 жыл бұрын
Thanks for the advice. I was surprised because we hadn't driven it for at least a week or more
@bvward 2 жыл бұрын
Scott, titanium fasteners are notorious for galling (cold welding) even to themselves. Anti-seize away!
@ndh641 2 жыл бұрын
May need to consider aero for high speed….akin to nose of plymouth superbird. Perhaps a finely fabricared VB keg split in half and positioned side by side in front the grill
@mrcasperjensen 2 жыл бұрын
Time to start playing with aero… and see what can be achieved with that. Boot spoiler.. front spoiler.. ect
@jenibond 2 жыл бұрын
Extra day off for Queen Jubilee !! Large Buffalo trace and Pepsi max !!! Scotty talking dirty !!!! Trovol Going fast !!!!! And not shifter span insight ???? WTF !!!! Great entertainment !!!
@terjejohnsen3651 2 жыл бұрын
Its so Nice to have a beadroller it make intercoolerpiping so easy. How many HP are you aming for. The trollvo is so awsom.
@jrbuch 2 жыл бұрын
I saw Trent from Chequred tuning had a JZX100 with one of these turbos in the other day and made 600rwkw or thereabouts, so ALOT of power. Makes my 414rwkw 1JZ seem quite sedate by comparison, and I never thought I'd say 400rwkw was a small power figure.
@STREETMACHINETV 2 жыл бұрын
400rwkw is nothing to sneeze at, it's good power!
@Staffo1972 2 жыл бұрын
A sleeper!
@JossRickard 2 жыл бұрын
oooh hello there turbo taxi 18:30 ...haven't seen you in awhile, what're you doin....
@phillip9469 2 жыл бұрын
Next challenge will be to make the VN run 9's
@STREETMACHINETV 2 жыл бұрын
In reckon we could do that.
@honestpat7789 2 жыл бұрын
Was just thinking, the other day, the trolvo needs a bigger turbo, because it isn’t quick enough 😂
@vanderdander8112 2 жыл бұрын
Hell yesss!!!
@ChristopherHallett 2 жыл бұрын
Always keep the amount of bespoke one-of-a-kind parts to the absolute minimum. Modify the custom-made intercooler piping, not the off the shelf housing. This way if the housing ever needs replacing it's stock for stock, no extra effort required. It's best to follow this principle with every single system and part on every car wherever possible.
@STREETMACHINETV 2 жыл бұрын
Great point!
@damianscheuber1603 2 жыл бұрын
Should have used the cast elbow, the silicone ones blow off and split in that application
@STREETMACHINETV 2 жыл бұрын
We can always fix it later. More content!
@DaveHiggoHiggins 2 жыл бұрын
Wonderful whirly boi noises.. Looking forward to 650rwhp!
@ChristopherHallett 2 жыл бұрын
If those Pulsar turbos really are "as good as" the Garrett ones they're ripping off, then you should be able to get enough air out of it to make 750+ rear wheel horsepower out of a nice high-VE engine like a 1JZ. Just depends on whether the fuel system and engine internals are up to it.
@zeroyon9 2 жыл бұрын
1050 = 950 in reality. Still very impressive and should reach your goal easily.
@b3nny90 2 жыл бұрын
There are guys that have pushed it passed that but you are well outside the scope of the compressor map. It can make 1050 no problems with the right setup but as he said the ratings are generally flywheel
@zeroyon9 2 жыл бұрын
@@b3nny90 got any links ? Most I have seen is 971 on a barra, at the wheels. Most end up around the 850's at wheels though.
@mattyosborne1453 2 жыл бұрын
Since all the cars are getting some spicy pulsar turbos I hope you have a G42 or G45 lined up for turbo taxi
@davidbarnsley8486 2 жыл бұрын
Come on Scotty it is no way stupid to go faster I call it evolution 😂😂👍👍
@richtrippa9450 2 жыл бұрын
Can't wait to see it run a pass!!
@OVERKILL_EVERYTHING 2 жыл бұрын
What Scotty said: our volvo runs 10's, but because we're idiots we're going to make it even faster. What Scotty meant to say: our volvo run's 10's, but because the Mazda ran 9's, I'm now addicted to running 9's or better so now everything in the carnage shop will run 9's now 🤣
@martyburgess341 2 жыл бұрын
If that Turbo ain't bad it might end up on SuperMang!😉
@countrychef29 2 жыл бұрын
600hp in the 9 second = 69
@akriminal7951 2 жыл бұрын
Love your work, next thing it needs is a roll cage to protect that lovely head of yours. Can't wait to see it on the dyno and track she going to scream
@b3nny90 2 жыл бұрын
Bit of a difference between this and project bluebird back in the day.
@STREETMACHINETV 2 жыл бұрын
Sure is
@JossRickard 2 жыл бұрын
"Where'd all that pressure come from?" Nevermind.
@michaelb5330 2 жыл бұрын
Did you get a second turbo the same to put on to the mx5? (Give us a comparison) Buy two get one not free ? 😜 Got to love your work and humorous approach Scott 9s in two of your cars Hope this one skips 9s and goes straight to 8s
@letsallbe-friends1120 2 жыл бұрын
*Turbski?? I thought there was an embargo on Russian parts at the moment.* 😁
@Fortniteguy2468 2 жыл бұрын
I love you guys
@GTFORDMAN 2 жыл бұрын
next on the list to be fixed is that fkn parking light!
@henrystevens9893 2 жыл бұрын
Mate, love the content and what you're planning. The light bar you're using really caught my attention. Please let me know where you got it. Thanks. Cheers
@STREETMACHINETV 2 жыл бұрын
Schumacher Racing
@LRogan520 2 жыл бұрын
Two cars in the 9s greedy..aha, and the Volvo is so simple as such compared to the mx5 - plus what a sleeper it is..
@brettwatson-will3388 2 жыл бұрын
Go the mighty Trolvo... Any chance you could fix the blown light globes on it also?
@STREETMACHINETV 2 жыл бұрын
Maybe
@brettwatson-will3388 2 жыл бұрын
@@STREETMACHINETV They won't make it go any faster but the original Volvo running lights were pretty cool... Volvo's were way ahead of their time.
@Low760 2 жыл бұрын
So both old turbos from the mx5 will go on the 1uz Right?
@STREETMACHINETV 2 жыл бұрын
Nah, it's only 4-litre. Those turbos will be too much for it.
@Low760 2 жыл бұрын
@@STREETMACHINETV Yet not quite enough history tells us. But I guess with enough nitrous you can run any turbo like the Hoff does!
@markgriffin4888 2 жыл бұрын
I'm just wondering what "safety shoes " are you going to wear once you run out of your supply of KT26's??????? I know that it is a hard hitting question 😆😆😆😆😆😆
@brettlusby8094 2 жыл бұрын
Hi, was trying to work out why you didn't use titanium nuts on bottom of manifold, was it because you couldn't get spanner on? Can you buy titanium nuts with standard 6 flats? cheers
@STREETMACHINETV 2 жыл бұрын
Shhh, you weren't supposed to notice that, but yes in a couple spots the pipes were too tight to the nuts and so a ring spanner would fit and an open ender doesn't work on 12point nuts
@jesus_built_my_hotrod 2 жыл бұрын
How tight do the manifold studs need to be in the head? Just about to do mine on my barra and was told dont do them up too tight?
@STREETMACHINETV 2 жыл бұрын
Just seat them don't tighten beyond that
@jesus_built_my_hotrod 2 жыл бұрын
@@STREETMACHINETV cheers 👍
@crunchytheclown9694 2 жыл бұрын
woohoo scotty
@counterfeitcash6513 2 жыл бұрын
the pressure in the coolant system when cold is not a good sign Scotty.
@STREETMACHINETV 2 жыл бұрын
What do you think caused it?
@counterfeitcash6513 2 жыл бұрын
@@STREETMACHINETV in my experience it normally mean some kind of compression leak.
@AndrewBitza 2 жыл бұрын
What are the specifications of the new turbo?......A/R ratings.
@STREETMACHINETV 2 жыл бұрын
0.83 rear, 0.75 front
@damfadd 2 жыл бұрын
what sort of boost do you think. your getting with the waste gate
@STREETMACHINETV 2 жыл бұрын
At the moment we've been running 27psi but we'll probably turn it up a little
@stephenthompson9722 2 жыл бұрын
17:20 makes me want to go clean my rifles. You do any shooting Scott?
@STREETMACHINETV 2 жыл бұрын
All my life
@Doc_in_the_carpet_truck 2 жыл бұрын
Geez all the dirty turbo talk need a cigarette after that!!🍻👍🤣
@RhysK94 2 жыл бұрын
Won't be 1000 odd flywheel capable with that small rear housing. Great turbo's tho!
@STREETMACHINETV 2 жыл бұрын
Maybe not but plenty for what we need
@trentcrompton9527 2 жыл бұрын
👍
@WittyScrewdriver 2 жыл бұрын
Hey just realised your offsider hasn’t been in any episodes
@STREETMACHINETV 2 жыл бұрын
He's returned to a writing role with the magazine, at his choice
@marksinclair3652 2 жыл бұрын
Noice
Sergio Outdoors
Рет қаралды 47 МЛН
Dead Dodge Garage
Рет қаралды 1,9 М.
Diesel Creek
Рет қаралды 121 М.