Nerf springer musket assembly guide

No video

Nerf springer musket assembly guide

Рет қаралды 22,739

2 жыл бұрын

See it in action:
• Nerf Musket V2-2: Bigg...
Print files:
- www.etsy.com/s...
Print instructions:
- docs.google.co...
Print partners:
/ digitowl3d

Пікірлер: 59

@BigScreenLife 2 жыл бұрын

Also for the ram rod, you could make the center hole on the plastic parts bigger, key them to sit together well and then run a threaded rod through the whole thing with nuts on both ends.

@LARPBeard 2 жыл бұрын

it would be awesome if there were just a list of hardware parts. the box in the print instructions is a bunch of links that cannot be selected vie docs individually, just copy the whole box and pasted in a place where one can cope individually, opened and noted down to make a list. seems like a hassle :(

@carnyrex1872 2 жыл бұрын

The hardware is also listed (with dimensions) in the main parts list separately, at the bottom of that section - or did you mean something seperatley

@maikfriedrich4920 2 жыл бұрын

@@carnyrex1872 I have he same issue. I can't open the links and if I try to copy the links there is always a message that they couldn't find the page. Also I'm not that into this custom nerf hobby so I have no clue what parts I need when there are options for like Caliburn or Talum Claw. So a list with links of the exact parts would be very nice 😁

@wydoqgames 3 ай бұрын

@@carnyrex1872I have the problem that I dont have a 3d printer so what should I use for the ramrod?

@jasonwoodland474 2 жыл бұрын

You mentioned a 3d printer like the Ender 3 will print out the parts for this musket. Would the Ender 3 cover the 12 pounder cannon on the naval carriage?

@carnyrex1872 2 жыл бұрын

That thing is much tiny-er, that will fit fine

@bocyboy99 2 жыл бұрын

Did you print these parts out of PLA or PETG for this project? I'm especially wondering for the plunger what material you used.

@carnyrex1872 2 жыл бұрын

Surprisingly PLA works fine with a high infill

@MrRichie104 2 жыл бұрын

What filament did you use to get that lovely gold colour?

@polarmuffin6579 2 жыл бұрын

For the Ram rod, you said it needs to wear in, would it be easier to just sand the ram round or would that make it too lose?

@carnyrex1872 2 жыл бұрын

You can do that and just try as you go, but “wearing” does not take long anyway!

@ridokilos-actual Ай бұрын

Heat set threaded inserts for the ramrod perhaps? I realize this is a 2 year old video and maybe already has adjustments. I'm planning on using 10-32 threaded rod so hopefully it's not an issue.

@ELITESrBAMOFOS945 2 жыл бұрын

How much to commission a nerf martini henry?

@dirpapa Жыл бұрын

i would pay SO much for that

@radicalframe 2 жыл бұрын

Man it's so hard to get all these tubes/springs/rings in germany.

@skdwotmodelchannel3900 2 жыл бұрын

I really like this model, it's really great! I tried and bought it on etsy twice! But all failed😭😭😭😭. Is there any other way to buy?

@suraiyaybarra5888 Ай бұрын

YesI think there’s only two left that are different

@Rogue_gaming965 4 ай бұрын

hey carny rex is the FLINTLOCK MUSKET HARDWARE KIT from frontline foams good for this modal

@lordz35 2 жыл бұрын

I want to get a 3D printer but there are so many on the market. Do you have any recommendations?

@carnyrex1872 2 жыл бұрын

If you want cheap, get an ender 3, you can upgrade it over time to perfection. If you have extra scratch grab a Prusa Mk3 which will have similar capabilities but much more reliability / less time spent tinkering to get it right

@lordz35 2 жыл бұрын

@@carnyrex1872 Thank you!

@user-mt8qm2ci7g 6 ай бұрын

Ender 3 pro v2 or max neo

@Kirby-xj9mp 2 ай бұрын

If you buy it from one of the print partners will they make it for you or does come in parts and you have to make it yourself?

@Raptor2487 3 ай бұрын

Now I think that you should try to redesign the ramrod as it is really weak and mine broke so I got a better one made of wood so I think you should try to redesign the ramrod

@batingbunnies 2 жыл бұрын

Can these be done on a resin printer as well or is it smarter to do fdm due to the size?

@grahamturner2640 2 жыл бұрын

There are resin printers that are pretty large, though the large FDM printers and the materials for it are less expensive.

@shuswjdndnfnfbfnfvegeheg1930 Жыл бұрын

Can you use the stock pieces from your other family of muskets?

@jimmyolsen4046 2 жыл бұрын

how hard does the flint lock mechanism hit?

@user-mt8qm2ci7g 6 ай бұрын

Where did you get the polycarbonate tube?

@sidp769 Жыл бұрын

Can u sell these put together please.

@masimo357 4 ай бұрын

Can you premake this then send it over??

@grahamturner2640 2 жыл бұрын

Have you tried making a ramrod that had interlocking parts or are they too small for that?

@carnyrex1872 2 жыл бұрын

Yep! This was the original version of the ramrod you see with the elastic musket barrel, it was kinda weak at that diameter of a Nerf dart. This method is annoying but at least it’s strong

@bred007 6 ай бұрын

will you be selling the spring musket assembled soon?

@HOUNDsArmory 2 жыл бұрын

I can't wait to build one of these!!!!

@jonno156 4 ай бұрын

How big does the printer i use need to be

@0Dx_ge 2 жыл бұрын

I hope there will be a way to buy it premesse because I don’t have a 3D printer

@zalenka-387 2 жыл бұрын

In the description he has links to people making them

@0Dx_ge 2 жыл бұрын

@@zalenka-387 I just clicked on it and it says its removed. What do I do?

@haydendarr1244 Жыл бұрын

I am sure you get this A LOT but would there be a way to convert this easily into an airsoft replica?

@daze143 Жыл бұрын

Is the hardware kit on frontline foam's website still accurate for v2? The picture on the product page doesn't seem to quite match the hardware listed. But maybe I'm missing something.

@KermitTheGamer21 Жыл бұрын

I commissioned someone to print the parts for me but it seems like the tolerances for the piston head were messed up, it is super loose and just slides freely. I suspect that will be an issue. Can I just glue it to the piston rod or do I have to get them reprinted?