Cartridge guide and extractor installation in Savage MKii
Пікірлер: 46
@MrFred4513Ай бұрын
THANK YOU! You saved the day. Had a broken extractor trying to get things re-assembled. Enough to make a preacher cuss. Followed your video....simple and easy.
@joepangit69382 жыл бұрын
Thank you sir. You saved my sanity! After taking my new MKII out the 3rd time, and having it begin to do FTE every other round I decided a 1st cleaning was in order (after about 150 rounds). Taking those parts out is easy peasy, but putting them all back in and snapping that ring over was giving me the blues. I got it back together using your method on the first try! - Joe
@jeffhodgson588 Жыл бұрын
Thanks for the video I wasn't going to put a new firing pin myself but called a gunsmith and he wanted to change me 100.00 bucks to put the firing pin in well you're video saved me that cash thank you so much
@hondasaurusrex69983 жыл бұрын
Ha! So that's how it's done! Seen another video. Took me about 10 minutes and a ton of swearing to get the guide and extractor in. This makes it simple. Thank You!
@franharris821011 ай бұрын
Geat Video…. Thank you for demonstrating the correct procedure for assembly… 👍👏👏👏👏👏👏👏👏👏
@tomthomas46662 жыл бұрын
Your VIDEO is by far the best and simplest repair have seen on this problem. Thanks!
@dalesearcy57343 жыл бұрын
Shot my Mark II F for the first time, today. The bolt would only extract the empty shell about 3/4 of the time. Savage is sending me a new extractor and now I will be able to install it with the help of this video. Thank you for posting it.
@74willy813 жыл бұрын
Thanks for a thorough and professional explanation. Although I've done this for years myself I've seen way too many videos showing the wrong way of doing this while using incorrect parts descriptions in reference to the extractor and cartridge guide. I'm sure this has confused a lot of folks and spread a lot of misinformation.
@imaflymydroneatit11 ай бұрын
Easy peasy. Thank you for the easy and short video
@ChrisSlack3 жыл бұрын
Thank you! I just received a new extractor and cartridge guide from Savage for my Mark 2
@patrickdolan58858 ай бұрын
Thanks! A lot of help!!
@TheRoncaputo Жыл бұрын
Thank you, this was very helpful and I couldn't find it anywhere else.
@johnhockgeiger78782 жыл бұрын
Great video Rich
@dougi19673 жыл бұрын
Very helpful, thanks for posting this fine information
@JM1034411 ай бұрын
Awsome. Thank you.
@retardedmoose0072 Жыл бұрын
Thanks you sir this technique worked first try
@clarkpitts5393 Жыл бұрын
A++ And If you will add a 2nd retaining spring clip, on top 1st retaining clip, your gun will shoot dirty . For suppressors and all ammo.
@cinde_swchannel7513 Жыл бұрын
good for my inspiration
@Mauser3043 жыл бұрын
Savage has been very little help with the extraction issue on my MKII. It took four emails to get the replacement spring, extractor and guide. I installed using your directions, which are very helpful, only to have a worse extraction issue. Now it fails on every attempt. Before it was one failure in about 10 tries. Needless to say, I am about done with this firearm.
@antlerking692 жыл бұрын
Heck yeah, that's the ticket 👍
@tomdog5265 Жыл бұрын
File that extractor to a more acute angle will fix the FTE. Just 5 strokes with a file will do it.
@dwhunter89042 жыл бұрын
I have a new Mark II. I have less than 150 rounds thru it. The face of the bolt is clean and free of debris, the hook is sharp on the extractor. It quiet often will not remove the round from the chamber. I can pick the spent shell casing out of the chamber with my knife...and it seems to come out very easily. The rifle also will not remove a unfired round occasionally. I then have to shoot it into the ground and pick the empty casing out. Any ideals ??? The chamber/ bore has been cleaned also. Thank you
@rdtaguestudios2 жыл бұрын
Sounds like there is an issue with the chamber. I would take it to a gunsmith for inspection. Or, you can send it to us. We are a brick and mortar retail firearms store with gunsmith services.
@kevinhullinger87439 ай бұрын
Same issue savage sent me new spring and extractors same issues how did you resolve?
@joesmith-tg3co Жыл бұрын
thank you very much
@adnanfarooqui6189 Жыл бұрын
Where should I buy extractors kit help please
@joesmith-tg3co Жыл бұрын
@@adnanfarooqui6189 contact savage arms, they will help you out
@peterraab5920 Жыл бұрын
I believe I damaged mine years ago trying to do what you just did
@DARKSCOPE0013 жыл бұрын
Excellent video I had a heck of a time doing mine. Also I want that bolt knob where did you get that?
@rdtaguestudios3 жыл бұрын
I turned it in my shop.
@DARKSCOPE0013 жыл бұрын
@@rdtaguestudios nice I have an fvsr and I like it a lot but the one you have is just plane awesome
@larrybaker53169 ай бұрын
thanks for video, my Savage 93 .22wmr has lots of fail to fire, I had run 3 different brands through it with the same results. The imprint from the firing pin on the fail/fire looks as good as the ones that do fire....any ideas? should I change out the firing pin spring and firing pin? thanks
@rdtaguestudios9 ай бұрын
I would swap out for a new FP spring, as my 1st choice.
@larrybaker53169 ай бұрын
thank you so much!@@rdtaguestudios
@donaldfiesta86662 жыл бұрын
Excellent I had the clip on backwards😂😜
@michaellang77793 жыл бұрын
I am having extraction and fire issues and I do not know why I cleaned it really good and everything and sometimes it will fire and sometimes it won't and I can not find the parts for the bolt so I can replace them would you happen to know where I can purchase them? I'm desperate I absolutely love my mark ii and want it going again.
@rdtaguestudios3 жыл бұрын
Numrich, when they are available.
@bethmilam37723 жыл бұрын
To resolve extractor issues see video: Savage B22 & MK II Extractor Fix!!! kzfaq.info/get/bejne/hsWqnseny7C-gZ8.html As well as my comment on that video and the replies to my comment. Did a lot of research on various ways to reduce extraction issues in this firearm (including suggesting the assembly procedure demonstrated here by Aces and Eights Firearms).
@mikes8915 Жыл бұрын
Where did you get that bolt handle
@rdtaguestudios Жыл бұрын
We turned it in our machine shop.
@adnanfarooqui61892 жыл бұрын
Where should I can buy extractors for this savage .22 MKii help please thanks nice show in vedio
@adnanfarooqui61892 жыл бұрын
I need to fix my savage .22 rifle.bolt action mark11 extractors can you send me I will.buy
@MikeMercury2 ай бұрын
where would you buy these ?
@rdtaguestudios2 ай бұрын
Buy which part?
@510DEACON9 ай бұрын
Hey Rich I have a question on a model 287m 22 I have a similar piece in this 22cal I took apart and it fell out so I don’t know where it went can u help me out?