Carved the USMC emblem using the

Рет қаралды 18,101

5 ай бұрын

I decided to carve the USMC emblem. I used two bits. I used 60 degree vbit and a 1/4 down cut end mill. I first used shellac to help hold down the oramask then proceeded to carve. I believe a new 60 degree vbit is needed as it did not cut the oramask cleanly and contributed to tear out, but I still had decent results, enjoy!

Пікірлер: 57

@joepie221 6 күн бұрын

Nice work.

@encarwoodworking 6 күн бұрын

Thanks for the kind words!

@achdee55 4 ай бұрын

Beautiful, nice work. Just got my Onefinity and just subscribed to your channel.

@encarwoodworking 4 ай бұрын

Thank you for watching and subscribing! You will really enjoy the CnC and make wonderful things.

@MattMadeIt123 Ай бұрын

Project looks fantastic. Semper Fi!

@encarwoodworking Ай бұрын

Orraah!

@UserZO5672 22 күн бұрын

Awesome work!!!

@encarwoodworking 22 күн бұрын

Thank you so much 😀

@brandoncollins5694 5 ай бұрын

Looks great!

@encarwoodworking 5 ай бұрын

Thank you Brandon! I appreciate your kind words!

@ronnorris1504 5 ай бұрын

Great little project! i'm starting to use MDF more in my carving project. Seems to work really well as long as you seal it and a newer bit does help. As always, thanks again.

@encarwoodworking 5 ай бұрын

Thanks Ron! I like mdf too much.

@deplorable_2024 9 күн бұрын

MDF has glue in it which can be harder on blades and cutters.

@encarwoodworking 9 күн бұрын

@deplorable_2024 Very true and thanks for reminding me to buy new bits.

@kevinrich4637 5 ай бұрын

Nice job. Just got my Woodworker Elite. New subscriber.

@encarwoodworking 5 ай бұрын

Thanks for watching and subscribing Kevin! You will enjoy your elite. I think eventually I’ll do the upgrade to elite.

@lawcribb6954 Ай бұрын

Great job looks great i have been carving a lot of cherry with my CNC I will have to try MDF again its been a while

@encarwoodworking Ай бұрын

I like MDF a lot since it is inexpensive, but it is hard on the bits. I appreciate you watching and the kind words!

@cuervose 5 ай бұрын

Awesome

@encarwoodworking 5 ай бұрын

Thank you for watching and the kind words!

@rogercharlie 5 ай бұрын

Lovely result. You are putting your machine to good use. Did you creat the vector yourself?

@encarwoodworking 5 ай бұрын

Thank you! I did not create the vector. I honestly don’t remember where I got it. It might have been from thingiverse or the numerous FB groups I follow.

@user-wx5ev6nz2o 5 ай бұрын

What bits did you use to make this? I have a friend who is a Marine so you definitely got my attention with this

@encarwoodworking 5 ай бұрын

I appreciate you watching the video!! The bits used were a 60 degree vbit for all the lettering and graphics then a 1/4 down cut end mill for profile cut

@totoffe6234 Ай бұрын

Je débute en cnc et quand je vois réalisé ce projet magnifique et surtout en mdf et votre papier collant (je sais pas ce que c'est comme papier) je me dit vivement que sa arrive chapeau M l'artiste.

@encarwoodworking Ай бұрын

Bienvenue dans le monde de la CNC. Je sais que vous apprendrez et réaliserez de grands projets. Merci d'avoir regardé !

@totoffe6234 Ай бұрын

@@encarwoodworking Excusez moi j'ai une petite question c'est quoi le produit ???? que vous mettez à 0:23 de la vidéo Merci d'avance pour votre retour.

@encarwoodworking Ай бұрын

C'est oramask 831 (a.co/d/amj4gtr).

@totoffe6234 Ай бұрын

@@encarwoodworking Merci mais page introuvable

@encarwoodworking Ай бұрын

Désolé, le lien ne sera pas publié pour une raison quelconque. Il vous suffit de rechercher oramask 831 dans votre navigateur ou sur Amazon.com

@unclebob8746 2 ай бұрын

What exactly is the blue film you used? Semper Fi. RVN 30MF11

@encarwoodworking Ай бұрын

So sorry for the late reply. It is oramask. I got it from Amazon!

@petebernard218 5 ай бұрын

👍

@encarwoodworking 5 ай бұрын

Thanks Pete!

@RayWest-su5xn 3 ай бұрын

I am an old Marine and I have an Avid CNC. Would it be possible to get a copy of the G-code you generated? Thanks in advance for your help. Good video.

@encarwoodworking 3 ай бұрын

Ooorah! I tend to clear my thumb drive of the G codes but I’ll try to find if I have it.

@RayWest-su5xn 3 ай бұрын

Thanks sir!

@WabiSabiCustomsLLC 3 ай бұрын

Any luck for a Salty Dog?@@encarwoodworking

@iwannaapple7190 2 ай бұрын

@@encarwoodworking Just in case you ever want to do it because you deleted your files of your thumb drive, you might want to know that you really didn't and they can be retrieved. You can think of it as putting your foot in the mud. Your foot may not be there anymore but your foot print still is. It easy to google the code...or it used to be anyway.

@encarwoodworking 2 ай бұрын

@iwannaapple7190 that’s good to know. I’ll try to hunt it down that way

@unclebob8746 2 ай бұрын

Should be 03mf11

@markgreen2770 5 ай бұрын

Where can I find the file?

@encarwoodworking 5 ай бұрын

To be honest with you Mark but I don’t remember 😭. But if I had to guess it would be from one of the numerous FB groups associated with CNC/Stl files etc. sorry I couldn’t be more helpful

@raydeese4439 5 ай бұрын

It's not a carving project if the machine does the carving it's a cheap Chinese type of product. That's all it is.

@encarwoodworking 5 ай бұрын

I appreciate you watching and opinion either way!

@rickenterkin4720 3 ай бұрын

Bro, why you so mad. You mad cuz you don't have the tools to do it? The machine to do it? The know how to make the machine carve it out? You mad cuz his hustle is better than your hustle? Poor guy.

@encarwoodworking 3 ай бұрын

@rickenterkin4720 I appreciate you my friend.

@rickenterkin4720 3 ай бұрын

@@encarwoodworking I want 1 of these so bad. So much potential. Keep up the great work ole son. Enjoy the videos. GOD BLESS.

@encarwoodworking 3 ай бұрын

@rickenterkin4720 thank you! 😊