Carving a wood sign with a CNC!

No video

Carving a wood sign with a CNC!

Рет қаралды 440,351

Күн бұрын

Here's some footage of a sign i made for my shop! ToolsToday provided me with some awesome Spektra CNC bits for this project that worked wonderfully! I used the 1/4" compression bit (46170-K) as a clearing tool and then the 60° V-Groove bit (RC-1148) to finish off the carving. I then used the compression bit again to run a profile cut with tabs and finished it of by chamfering the outer edges with the v bit! The Sign turned out great and needed no post processing other then removing the tabs! stay tuned for some more cool CNC projects!
Follow me on instagram here: / wildrosebuilds
you can check out the sign making bit set here www.toolstoday...
#cnc #woodworking #wildrosebuilds #toolstodayprovidedproduct #woodwork #woodworker #woodshop #dowoodworking #woodcraft #carpentry #craftsman #diy #wood #craft #maker #engineering #sign

Пікірлер: 151

@WildRoseBuilds 5 жыл бұрын

Stay tuned for some cool 3d wood carving! Follow me on instagram to see my upcoming projects! instagram.com/wildrosebuilds

@richardrappleyea7307 5 жыл бұрын

I'm wanting to use a cnc machine at school and I was wondering if you have to use a certain program or if I could just use solidworks since that is what we have

@WildRoseBuilds 5 жыл бұрын

Ricky Rappleyea I’m not sure about solid works but fusion 360 has cam toolpathing built in

@richardrappleyea7307 5 жыл бұрын

@@WildRoseBuilds Ok thank you

@jackofalltradesmasterofone500 4 жыл бұрын

yes thanks for let me know sir

@paramtrx9558 3 жыл бұрын

Looks like the Plywood gave you a gift of mountain's and the sun! Very Cool!

@MattJonesYT 2 жыл бұрын

The knot in the sky makes it look like a sunset

@amurphykilla 5 жыл бұрын

Cool. I always prism cut the profile with v bit first then use profile cutout . Saves a tool change .

@nsscooters 5 жыл бұрын

Need. More. Videos... love these SPEKTRA bits

@WildRoseBuilds 5 жыл бұрын

More to come! ;)

@jrobmccoy 5 жыл бұрын

That came out great! I'm looking forward to this new addition to your channel.

@WildRoseBuilds 5 жыл бұрын

I have a ton of awesome cnc projects lined up, im very excited to share them!

@-mejor-que-nostradamus-6152 6 ай бұрын

People Donot Think It Finished Smooth And Beautiful Like The End Of Video, He Has To Finish Project Sanding All Edges. Amén.

@shelby50411 3 жыл бұрын

Looks great

@WildRoseBuilds 3 жыл бұрын

Thanks!

@jordancourse5102 3 жыл бұрын

I’m here for the relaxing feeling I get when watching this.

@lamacap 5 жыл бұрын

It just looks nice.

@WildRoseBuilds 5 жыл бұрын

Jason Rietzke agreed :)

@GrizzlyNacho 5 жыл бұрын

Your videos are always such a wonderful combination of mesmerizing, fascinating, and peaceful. Keep up the great work!

@WildRoseBuilds 5 жыл бұрын

Thank you for the kind words!! 🙏🏼

@Hawk1966 5 жыл бұрын

Could watch that all day long. Fascinating!

@lefthandstory1280 3 жыл бұрын

Nice upload friend ,amazing work👍👍👍

@mancavehobbies6213 5 жыл бұрын

OMG awesome

@WildRoseBuilds 5 жыл бұрын

Thanks!!

@huntliba 5 жыл бұрын

So satisfying to watch! You projects/what you do is just awesome!

@Madskills-hw2ox 4 жыл бұрын

Great piece

@mitkasan8915 5 жыл бұрын

Very cool!!! We want more)))

@woodworkingvangioi4996 2 жыл бұрын

beautiful

@mtbjump714 7 ай бұрын

Very nice video!!! pleasure to watch. just a question, would you tell me de rpm and speed rate for your 60 degree bit please!!

@redkb 5 жыл бұрын

So awesome

@imnotcool3432 5 жыл бұрын

Doing wood work is kinda hard but fun good job dude.

@WildRoseBuilds 5 жыл бұрын

Imnotcool343 true! Very rewarding to make something out of wood! ☺️

@r.o.b9363 5 жыл бұрын

heck, Ive wanted one of these for awhile now lol

@WildRoseBuilds 5 жыл бұрын

such an awesome tool!

@werner1 5 жыл бұрын

That looks great!

@WildRoseBuilds 5 жыл бұрын

Thanks glad you like it!

@Wilczqr 5 жыл бұрын

IT'S AMAZING!!!

@KT.325 5 жыл бұрын

very cool!

@omnicnc 5 жыл бұрын

That is great logo cutting video. Welcome to cnc cutting world. OMNI is the affordable cnc router manufacturer.

@WildRoseBuilds 5 жыл бұрын

Hook me up 🙏🏼

@TheEvilVargon 5 жыл бұрын

I'd love to see this as an addition to the channel! The only thing is the CNC is that the CNC is pretty loud and uncomfortable when wearing headphones.

@WildRoseBuilds 5 жыл бұрын

TheEvilVargon thanks for the feedback! I dropped it by I think -7db but i’ll have to figure that out for the next video!

@moiacevedo8904 3 жыл бұрын

That's bad ass

@javelyn8565 5 жыл бұрын

Awesome, thank you

@miseryoftheages8000 5 жыл бұрын

Sick!!

@CdoGtheGreat 5 жыл бұрын

Wow you might have more hobbies than me :). Another awesomely produced vid. Hey should should make a wildrose builds neon sign next.

@WildRoseBuilds 5 жыл бұрын

That’s definitely on the todo list! Glad you enjoyed this!

@stiercreations 3 жыл бұрын

What program are you using? And can you explain how you made the v-bit round the edges please?! Thanks!

@kadidubai4150 3 жыл бұрын

In Vectric Aspire it is (Vcarve/Engraving Toolpath including flat area clearance tool)

@oswynfaux 5 жыл бұрын

At first glace I thought that straight bit was toast.

@notjannet 5 жыл бұрын

Thats real nice :)

@WildRoseBuilds 5 жыл бұрын

Not Jannet 🙏🏼 thankyou thankyou!

@peterkleene8240 5 жыл бұрын

Great vid but the noice from the drill part was terrible if you where using headphones

@slobat5200 5 жыл бұрын

Nope, just a terrible noise no matter how you listen... but indeed, a great video

@squirrelrobotics 5 жыл бұрын

I actually enjoyed that noise lol.

@DiscoverRajivVlogs 5 жыл бұрын

Why the milling bit was so colorful? Heating?

@WildRoseBuilds 5 жыл бұрын

thats the special wear resistant coating that armana puts on their spektra bits ;)

@thatonegamer2709 2 жыл бұрын

Might sound dumb but about how much is it for one of these machines???.

@RGB-Sign-Board Жыл бұрын

🎉

@vladimirtrubin 5 жыл бұрын

I was wondering if you can share how you have achieved the clearing and v groove toolpath please ?

@MUKESHGUPTA-vb7hv 2 жыл бұрын

Regarding toolpath contact me 9031275440

@ghislainlatulippe6959 5 жыл бұрын

Hello! What is the cutter do you take for the area clearance? And what is the best step over for make the perfect finish. For not to be sand for make good finish. Thanks and have great day.

@WildRoseBuilds 5 жыл бұрын

I think the general rule for step over is half the diameter of the bit or less, I used the 1/4” compression bit for the clearance tool.

@Madskills-hw2ox 4 жыл бұрын

Who teaches a person to program these machines? You get a pile of programs but we’re does one gain knowledge for the programming, to be wickedly creative.

@WildRoseBuilds 4 жыл бұрын

i guess that's all up to the creator. i've made a lot of simple signs so when i get to make my own custom pieces i tend to try new things and push the limits of my machine!

@dennisreynolds6915 5 жыл бұрын

What program do you use? I'm using carbide create/motion. Very simple but a little meh

@WildRoseBuilds 5 жыл бұрын

Stinky Potatos vcarve! Highly recommend, for a free alternative fusion 360 has toolpathing as well

@wildtoyou812 5 жыл бұрын

Vcarve Pro is awesome and easy to use.

@DanielH 5 жыл бұрын

Why is the endmill you used so blue?

@jerrysimeone 5 жыл бұрын

Hello, looks good. Did you use a bigger bit to hog out most of the pocket or did you use the v bit for the whole sign?

@WildRoseBuilds 5 жыл бұрын

Jerry Simeone I used the compression bit at the beginning as a clearing tool ;)

@user-cz1vz1qv3g 3 жыл бұрын

The machine does all the work. Any hands on skills?

@scottwatts1421 11 ай бұрын

What program are you using to run your servo motors

@drewtucker6923 5 жыл бұрын

What material is that? What kind of finish is on top, paint, poly, lacquer, wood conditioner? What speed do you like to run your spindle? What feed to you run?

@InTheLab3d 4 жыл бұрын

Was that just 2 pieces of like 3/4" ply glued together? Looks great.....

@davidtestori349 5 жыл бұрын

You should put inside a colorful resin ;)

@RKTech-rm5gt 4 жыл бұрын

What CNC machine and softwares are you using bro.?

@WildRoseBuilds 4 жыл бұрын

this is an old camtech z7 and i used vcarve for toolpathing, i will be featuring a more affordable large scale cnc in the coming months!

@adriel1176 4 жыл бұрын

Super cool. Btw which instrumental is playing in the background??

@ultimaterelaxingsounds8428 2 жыл бұрын

Nice work! What CNC did you use for this project?

@WildRoseBuilds 2 жыл бұрын

This was on a camtech z7!

@jackofalltradesmasterofone500 4 жыл бұрын

i like your cnc machine, but home made

@brookbrent9229 2 жыл бұрын

Great job...what kind of cnc do you have Thanks...#talent #awesome

@evertonhenriques6152 4 жыл бұрын

Very nice! How long was the total cutting time for this job?

@WildRoseBuilds 4 жыл бұрын

about 2.5 hours if i remember correctly! i didn't spend much time optimizing my toolpathing as this was just a one off sign! thanks for watching ;)

@chrisreynolds2410 2 жыл бұрын

What’s an example of toolpath optimization?

@kevincoates1597 5 жыл бұрын

Do you use vectric? Im using autodesk featurecam to program our cnc router and its really frustrating since its meant for metal cnc mills and lathes.

@WildRoseBuilds 5 жыл бұрын

Kevin Coates yeah this was done with vcarve, I also use fusion 360 for some toolpathing but I prefer the simplicity of the vectrics programs!

@slcsb116 3 жыл бұрын

Can we buy this machine.wht is this machine name.. enybody tell me

@jimmyz1686 5 жыл бұрын

Cool sign. Did you paint the plywood before carving or did you buy like that?

@WildRoseBuilds 5 жыл бұрын

I gave it a quick coat of paint!

@ragraphicsartsigncompany7245 4 жыл бұрын

Please sir I need you to help for the machine I budgeted to buy. Is cnc machine, please which one can I look for, I want use it for cutting composite board, acrylic plastic, wood, and iron sheet, engraving on wood, composite board, and acrylic plastic. Please which brand and model is best?

@baileystroebel1401 Жыл бұрын

Awesome video! How do you create your 3D carve files?

@MrBrettStar 3 жыл бұрын

Where’s a good tutorial where I can learn how to program both clearing and vcarve

@raunakmuz 3 жыл бұрын

Did you find any ?

@LG-ro5le 3 жыл бұрын

Hey man Great sign! Do you use vcarve or fusion? I just got my cnc im setting everything up, thinking about getting vcarve pro

@javierjimenez2227 2 жыл бұрын

What type of machine are using? I would like to buy one? What can you suggest me?

@sulemannasir4028 4 жыл бұрын

Bhai is ka program kis tara bana ga

@williamwells8341 5 жыл бұрын

When I program lettering on my autocad and run it through the routercim I get circles that dont show up on the drawing but the DO show up on the MCU or at the machine. What causes this?

@WildRoseBuilds 5 жыл бұрын

i've had this happen with stray nodes, you could check your file for that or try using the simplify path command in illustrator to weed out unnecessary nodes. hope that helps

@holemajora598 5 жыл бұрын

Nice machine! What’s the info on your cnc?

@Naimy 4 жыл бұрын

What CNC machine are you using in this video?

@WildRoseBuilds 4 жыл бұрын

This is a big ol' Camtech Z7 ;)

@carbide1968 5 жыл бұрын

When did you get a cnc router? Can you tell us what brand and size it is please?

@WildRoseBuilds 5 жыл бұрын

I’ve had it forever it’s what got me into 3d printers! It’s a camtech z7 55”x105”

@shelby50411 3 жыл бұрын

@@WildRoseBuilds damn 55inx105in that a nice nice cnc must have cost 20-50k...common person cant afford that...why the heck would you downsize to a crappy flimsy diy tinker toy ooznest cnc?

@saucey9117 3 жыл бұрын

What CNC is that you are using?

@s_m-b_l-z_m7941 3 жыл бұрын

What program do you use??

@WildRoseBuilds 3 жыл бұрын

Vcarve and fusion 360!

@dohakarim6516 4 жыл бұрын

Whats the name of this machine please

@wernichtscharneck5368 4 жыл бұрын

Hi, what software did you use to create the Gcode?

@akshayd211 3 жыл бұрын

What CNC machine is this?

@WildRoseBuilds 3 жыл бұрын

This was on a camtech z7 😉

@akshayd211 3 жыл бұрын

@@WildRoseBuilds noice!

@charlenehall9152 4 жыл бұрын

What kind of CNC is this?

@crafteel 4 жыл бұрын

What type of wood used here?

@jeffstercnc2271 4 жыл бұрын

Looks like plywood

@WildRoseBuilds 4 жыл бұрын

5/8" baltic birch plywood! love this stuff for projects, gives alot of visual interest and is super strong for CNC furniture and stuff!

@jeffstercnc2271 4 жыл бұрын

And does not leave that bad dust like MDF lol

@ayoubbaddou9880 4 жыл бұрын

Wood thickness ?

@Leonard.J.Mills. 5 жыл бұрын

Super. Where is this CNC machine available for sale?

@lim8 5 жыл бұрын

🖖

@adrianocm403 3 жыл бұрын

Olá tudo bom qual marca da fresa ?

@JS-rp7qb 3 жыл бұрын

Anyone else ever try to blow the wood dust clear on a video?

@sudhirbhattarai1257 4 жыл бұрын

Can't we make it by using this machine .

@swiatloimiasto 4 жыл бұрын

what's the font name?

@user-ns9pq4tl4n 5 жыл бұрын

What cam did you use for this? Great work btw

@WildRoseBuilds 5 жыл бұрын

Oliver Berja thanks! I used a sawdust covered lumix g7 ;)

@MrSupersonico123 5 жыл бұрын

Como lo hacen?

@syntesi_cloud 5 жыл бұрын

Beautiful job! But, considering the type of graphic you have dealed with, wouldn't have been easier just cutting the contours of the logo, the contours of the base, and then glueing them together? You'd have saved much more time, energy and wood!