My FAVORITE Whittling Knives! OCC Tools Whittling and Wood Carving Knife Review

Рет қаралды 10,485

Күн бұрын

If you are a beginner or experienced whittler and wood carver who is looking for a new knife, look no further than OCC Tools! These knives are quality made and are available at an affordable price to fit most anyone's budget.
Video with OCC and several other knives for a complete overview:
• THE BEST Beginner Wood...
My favorite places to buy OCC Tools:
- treelineusa.com/traditional-c...
- thewoodcraftshop.com/occ-knives/
- mountainwoodcarvers.com/colle...
- bigfootcarvingtools.com/colle...

Пікірлер: 43

@marka.200 Жыл бұрын

Thanks for highlighting these, I had never heard of them and turns out they are made near where I live!

@allison2525 3 жыл бұрын

I really like your content. Thanks for taking the time to post carving and knife review videos.

@CarvingisFun 3 жыл бұрын

Thanks! I enjoy making them and glad you like them :)

@bertbennett2719 2 жыл бұрын

I just got my first OCC knife, 1 7/8" roughing knife. Sharp out of the box. It cuts pretty much the same as my sharpened and honed Flexcut. The handle is a bit longer and that gives a little more leverage. I like the shape of the handle better than I expected. From what I've read, it should hold it's edge well. Paid about $25 + shipping. Pleased with it.

@bradtate158 Жыл бұрын

Where did you order your occ knife at?

@stephenwhittier6439 3 жыл бұрын

Love my OCCT !

@CarvingisFun 3 жыл бұрын

They are really good tools!

@stevenc6256 3 жыл бұрын

Very informative. What 2 or 3 knife styles of OCC, or other makers, would you recommend to purchace for a beginner???

@CarvingisFun 3 жыл бұрын

Well, I can tell you that I use my 1-1/2" and 1-3/4" knives the most. Every now and then, I will use my 2" and 3/4" knives but about 95% of my carvings have been done with the knife size used in this video to make the little carving for the demo. So, pick up a knife between 1-1/2" and 2 inches as well as a knife around 1" and you should have just about everything covered for most carving projects.

@chancetownsend6718 3 жыл бұрын

Hey Brian, I asked a video or so ago if you'd review an old timer knife. Just forget about that knife and if you decide to do an old style knife look at the eight dollar imperial jackmaster on amazon. It is a Barlow as well but its really cheap and made of soft stainless steel but definitely a good knife to pass to a child.

@CarvingisFun 3 жыл бұрын

I saw that one, just worry about how long the cutting edge will last for whittling.

@larlequin4858 3 жыл бұрын

Hello, from the OCC brand what would you choose (and how many) for the best accuracy and tiny details (small figurines, facial features, etc)? I'd like to buy 2, or maybe 3 or 4 OCC knives and can't decide. "1 - 7/8", "1 - 1/2", "miny detail", "1 - 3/4"? All of them? Thanks!

@CarvingisFun 3 жыл бұрын

Howdy! I personally own the following OCC knives and it covers every single whittling need I have: 1 - 7/8" blade for roughing 1 - 1/2" blade for general carving 1" detail blade for small cuts You could also just grab the 1 - 3/4" blade for a good all around whittling knife and maybe a 1" detail knife for the small cuts.

@larlequin4858 3 жыл бұрын

@@CarvingisFun Thank you for your answer, and for the time you put into these very informative videos!

@parsaerfani7973 3 жыл бұрын

Hi, If you were to choose 5 knives what would you choose? Like a set you would always use .

@CarvingisFun 3 жыл бұрын

For any brand or just OCC? For me I primarily use my OCC 1-7/8" knife, OCC 1-3/8" detail knife, Helvie Detail knife, and my Flexcut stub sloyd.

@TheMrwoody3 2 жыл бұрын

I just bought 3 knives from big foot. I hope there all you say thet

@chancetownsend6718 3 жыл бұрын

Hey Brian, do you still have your buck 55?

@CarvingisFun 3 жыл бұрын

Not anymore. I'm not a knife collector and don't like it when I have tools sitting around and not being used. I usually pass them along to friends and family or trade them off to find something more my speed. In this case, I traded mine out to be able to afford some new knives to test out.

@bradtate158 Жыл бұрын

What occtool knives do recommend for biginnners?

@CarvingisFun Жыл бұрын

I like using blades between 1.5 and 1.75 inches in length for general whittling. Handle design is up to you but the larger handles fit my hand better.

@thedailydaily 3 жыл бұрын

What do you use for you finger guards? They look homemade. Just getting into the hobby and need some protection.

@CarvingisFun 3 жыл бұрын

I like to use self adhering bandage wrap (ace wrap) as they are cheap and reuseable.

@thedailydaily 3 жыл бұрын

Nice! Thank you.

@CarvingisFun 3 жыл бұрын

Welcome! I also made a quick video about several different types of gloves and finger guards if you want to check it out: kzfaq.info/get/bejne/ecp-h7F82-DXd58.html

@CarvingisFun 3 жыл бұрын

Welcome! I also made a quick video about several different types of gloves and finger guards if you want to check it out: kzfaq.info/get/bejne/ecp-h7F82-DXd58.html

@chancetownsend6718 3 жыл бұрын

Hey Brian I was wondering if you could DM me the pictures of your old timer knives. I don't want to waster your timer but I really love looking at old style knives even the ones I can't afford like great eastern cutlery

@CarvingisFun 3 жыл бұрын

Can we send DMs on youtube? I might be able to post on some other social media accounts, do you have a preference?

@chancetownsend6718 3 жыл бұрын

@@CarvingisFun I was thinking Instagram at ctownsend205 also says "bro"

@spaceforthesoul6286 2 жыл бұрын

6:00 which one you use?

@CarvingisFun 2 жыл бұрын

Of the ones shown on the linked video, I use OCC and Flexcut.

@clintstinkeye5607 6 ай бұрын

Are they good for very hard woods? If not, what is?

@CarvingisFun 6 ай бұрын

I use them for cherry and walnut all the time. But if you want some really nice higher end carving tools Deepwoods Ventures is a wonderful option. The blades are a bit thicker and hold up to harder woods

@clintstinkeye5607 6 ай бұрын

@@CarvingisFun - I have a bunch of purple heart and rosewood 2x2 sticks that I'm unsure of what steel standard is appropriate. Purple Heart is a stupid hard wood. I have a lot of whittling to do.

@CarvingisFun 6 ай бұрын

I have some purple heart that I have been playing around with as well! The OCC knives handle it well enough but take frequent stropping breaks to keep them sharp!

@clintstinkeye5607 6 ай бұрын

@@CarvingisFun - Is reprofiling an issue with stupid hard woods in your opinion? What would you go with if you had stupid hard woods up to ironwood? Just got interested in this topic after I noticed it. Durrnit! Now I gotta edumacate myself on a new thing. Thanks for the headache, bro.

@CarvingisFun 6 ай бұрын

I mainly use thicker knives with a edge angle between 15 and 20 degrees. Sloyd knives are also a great option for removing large chunks of wood.

@suzannerush9225 Жыл бұрын

Would the small or large handle be better for a woman?

@CarvingisFun Жыл бұрын

I would go with a smaller handle for the average woman.

@TheMrwoody3 2 жыл бұрын

Are

@scottfisher3948 2 жыл бұрын

If you don't use the knives why buy them?

@CarvingisFun 2 жыл бұрын

You have to know me or someone like me to fully understand my answer, but I just want to see how well they work, how they feel in the hands, and how they compare to others.