Case 430 Skid Steer Fell Over... Now the Engine Makes a Funny Noise

Рет қаралды 128,910

Күн бұрын

Kevin's Case 430 Skid Steer won't run right after falling on its side. Can we fix the 4.5 FPT?
Subscribe: ‪@DGHD‬ | Merch: debossgarage.com/merch
Watch next: • New Holland C232 Elect...
0:00 Case 430 makes a funny noise
5:41 Injector stuck
11:21 One new injector, all new hardware
19:00 After a day of work
20:38 Testing injectors ...again
26:03 Compression test
33:18 Will new injectors make a difference?
37:39 After another day of work
Follow us:
debossgarage.com
/ debossgarage
/ blackjackdeboss
/ debossgarage
/ debossgarage
Send stuff to Filthy Rich
411 Darling Rd, Canfield, ON Canada N0A 1C0
Merch, Tape Boss & Car Parts: debossgarage.com/store
Tools I use: www.amazon.com/shop/debossgarage
Show us your build project: debossgarage.com/nation
Help us make awesome stuff: / debossgarage
Watch More Deboss Garage:
bit.ly/DG_EngineSwaps
bit.ly/DG_AutoShows
bit.ly/DG_Reviews
bit.ly/DG_HowTos
bit.ly/DG_QuickTips
About:
From Tractors to Heavy Equipment to Industrial Machines, DGHD will show you how to build, operate, and repair anything with a throttle.
*If the video was helpful, please give it a "thumbs up" and consider subscribing.*
Theme Song: "Travelin'" by SWIB ( / swib-1 ) CC BY-SA 3.0
All Songs: / deboss-tunes
Music License: share.epidemicsound.com/deboss (30-day free trial)
© Red Egg Entertainment | made in Canada
--
NO WARRANTIES: All of the information provided in this video is provided "AS-IS" and with NO WARRANTIES. No express or implied warranties of any type, including for example implied warranties of merchantability or fitness for a particular purpose, are made with respect to the information, or any use of the information, in this video. DEBOSS GARAGE HEAVY DUTY ("DGHD") makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content of this video.
DISCLAIMER OF LIABILITY: DGHD specifically DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES and assumes no responsibility or liability for any loss or damage suffered by any person as a result of the use or misuse of any of the information or content in this video. DGHD recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. DGHD assumes or undertakes NO LIABILITY for any loss or damage suffered as a result of the use, misuse or reliance on the information and content of this video.
USE AT YOUR OWN RISK: This video is for informational purposes only. It is your responsibility to evaluate your own safety and physical condition, or that of your clients, and to independently determine whether to perform, use or adapt any of the information or content in this video. Any automotive repair and/or modification may result in injury. By voluntarily undertaking any task displayed in this video, you assume the risk of any resulting injury; your safety is the sole responsibility of the user and not DGHD.

Пікірлер: 246

@brianbouley2117 11 ай бұрын

Hate seeing Kevin have bad luck, but I always enjoy videos with him in them.

@FoolOfATuque 11 ай бұрын

Farming is just a series of unfortunate events

@OUSWKR 11 ай бұрын

Bad luck for Kevin means good content for us 😂

@omegagavin 11 ай бұрын

Love Kevin. He’s seems like a really good dude and pretty funny as well.

@N-V-B 11 ай бұрын

Agreed! More Kevin videos! Maybe he can fix the piston slap on his combine next!

@captnredbeard 11 ай бұрын

Their banter is the best

@lppuckster1298 11 ай бұрын

Always enjoy the segments with Kevin. Kevin and Rich together are dynamite!

@erichayes9192 11 ай бұрын

Guys you know you can't just go tractor tippin without causing some damage

@ctdieselnut 11 ай бұрын

Lol. On another note, cow tipping isnt a real thing.

@jaydunbar7538 11 ай бұрын

@@ctdieselnutthat’s literally the point, in case you weren’t aware board stretchers are not a real thing either but it’s still funny to send the new guy to go look for it.

@lewispaine4589 11 ай бұрын

I remember seeing a bent connecting rod on the counter of a rental shop years ago from "hydraulic locking", machine flipped over, oil drained into the cylinders, oil wouldn't compress when engine started after being set on it's wheels again , a lesson learned by many who saw that con-rod no doubt

@tomjohnson6036 11 ай бұрын

“What are you expecting Kevin?” “I’m expecting there’s going to be a sequel to this video.” I was thinking that same exact thing when I heard the motor cranking.

@jasont.5523 11 ай бұрын

That was the best line of the whole video. Haha

@JasonSmith-vd1sz 11 ай бұрын

Another great video. I hate to see Kevin‘s misfortune, but listening to you guys. diagnosis the motor is like attending a masters class in mechanical engineering. Well done.

@DGHD 11 ай бұрын

Thank you

@sHoRtBuSseR 11 ай бұрын

I had one of these once came in with a miss. Took forever to figure it out because nobody said it'd been tipped over, but it ended up having low compression. Pulled the head and had one piston that didn't come up even with the deck. The oil in the cylinder didn't compress but the connecting rod sure did.

@noshsreqd 11 ай бұрын

I would concur with the bent rod diagnosis. Had a friend ask me for help a few years back with a small Kubota excavator that went over on its side and as soon as it was upright they started it and went back to work but it was smoking a lot. As soon as they told me what happened I suggested they probably had a bent rod. Well their mechanic had already replaced the injectors, pump and even pulled the head to machine the valves but never looked to see if all the pistons were coming up to the same height on the deck. So we pulled the pan and measured the bottom of the skirt to the bottom of the cylinder on each one and sure enough two of the four were coming down lower in the bore.

@486kyle 11 ай бұрын

37:50 when it is running you can see the high speed screw on the injection pump spinning in the vibration, maybe it got run at well over governed rpm

@bonedaddy4670 11 ай бұрын

Kevin’s back! Love the HD channel.

@Adam_Poirier 11 ай бұрын

Kevin is the man

@Mr87corey 11 ай бұрын

Love it when Kevin's on!

@leemer1 11 ай бұрын

That compression tester not holding a reading is the most annoying thing ever.

@WhyBeNick 11 ай бұрын

I'm not sure what it is about compression testing gauges. No matter the brand, they're all trash.

@jakewaters5563 4 ай бұрын

@@WhyBeNick not hating on you but my cheap ass hobo freight one does. Don’t really work on diesels so it’s the gas one but still

@theglitch99 11 ай бұрын

DeBoss and friends can fix ANYTHING mechanical! IMPRESSIVE!!

@Dagrond 11 ай бұрын

So you have to be a machinist, mechanic and probably a doctor to be a farmer? Hat's off to the practical approach you all exhibit. Also, Rich owes you a beer.

@DGHD 11 ай бұрын

I got mine running properly first. Kevin owes me a beer

@madcat4563 11 ай бұрын

Welcome back to the skidsteer factory.

@herbertsorenson3400 11 ай бұрын

Love the videos. Keep in mind that engine is a backwards built cummins Case calls an Iveco. Cummins parts will fit mostly the same, but I am not sure about the oversized piston sets as the iveco has two sets in metric sizes. Experience from doing the same engine in the same machine from this winter. And also the injection pump is a tapered fit onto the gear, no woodruff key on the shaft.

@macfarms 11 ай бұрын

These are a FPT 4.5L engine, kind of a cross between the 4BT and newer 4.5L Cummins engines.

@Modlendingen 11 ай бұрын

Great to see Kevin again on the channel, just to bad he's always so unlucky :p But as always, I guess he's getting it going right again, at last :)

@LaLaLand.Germany 11 ай бұрын

You two back on a project made my day. You´re always smiling and laughing, this positiv attitude together with knowing Your stuff is just nice to watch. But give the poor thing a wash, skidsteers have feelings, too. Maybe it just feels so ...used to make it go "Meh, I need a brake". Say Hi to Kitty, kind regards

@TheBrokenLife 11 ай бұрын

It's not nice to sneak up on skid steers when they're sleeping and knock them over like that... ...especially if they've been drinking. 😆

@ericthimot 11 ай бұрын

Case tipping..... so cruel

@TheBrokenLife 11 ай бұрын

@@ericthimot *steer tipping. 🤣

@ericthimot 11 ай бұрын

@@TheBrokenLife omg.... you win. That was soooo much better

@TheBrokenLife 11 ай бұрын

@@ericthimot Scared the poor thing so bad that it even wet itself...

@Woodie-xq1ew 11 ай бұрын

I bet he wouldn’t try it with a bobcat

@horakrepair2546 11 ай бұрын

Pull head, check piston protrusion...... some will run pretty good especially while warm or higher rpm. Slight bend in rod is my guess. The bend will often cause the bearing to have an angled oil clearance, this will cause bearing and journal contact and fast wear on one journal.

@mikescott1307 11 ай бұрын

Yes Kevin is a very likable guy and obviously a hard working guy..best of luck with things guys!

@Eremon1 11 ай бұрын

Kevin's farm is starting to sound like a nemesis. He's got to owe you a whole Tim's franchise by now Rich. 🤣

@juanfo7307 11 ай бұрын

Farming is a series of unofortunate events

@HanhiEmo 11 ай бұрын

Sounds like Launch control banging on limiter 😁

@FishFind3000 11 ай бұрын

That 2 step

@michellericard4850 11 ай бұрын

I think when it rolled, it swished gunk around in the fuel system and it made the needle stick

@Tommy65i 10 ай бұрын

There is a small cover on the pump hiding the fuel pressure spring/spool. If you take the tamper proof cover off and take a punch. Mark it a 1/16 hammer down on the plugger. down on the relief. Will raise the pumps internal pressure. I work for case and had an old timer showed me that trick.

@jacksgarageworkshop 11 ай бұрын

Wait, Kevin finally gets a concrete floor, we haven’t seen it and you guys end up in an even worse shop. Epic.

@DonVDBorgh 11 ай бұрын

Keep the dirty side down! That is what was always said in trucking. 👍

@hanselgretel8563 11 ай бұрын

It's amazing how they diagnose things on how they break or fail or whatever. Nothing can easily replace the knowledge from years and years of exerience. Respect!

@vanguy7810 11 ай бұрын

Bent connecting rod. When it tipped over, oil leaked to top of one or more cylinders. If you did not remove glow plugs or injectors to release oil before cranking engine, she hydrolocked and bent one or more rods. Remove head and measure TDC of each piston

@anthonyblacker8471 11 ай бұрын

Ahh the old Princess Auto, here in the States we call her Harbor Freight (other names exist as well but I'll leave that to your imagination) I will say though, the Maddox brand, although very low priced, seem to actually get the job done very well for the price. Yes I prefer American made industrial tools, but sometimes, especially for a one time use (maybe once every few or 5 years) they really do work just fine.

@brandonfloyd6321 11 ай бұрын

I bought a 02 ford ranger 4 cylinder that the head was partially took apart on online so i found the original owner said it needed valves so removed the head and didnt see a thing wrong with valves. Cleaned head off and the rear combustion chamber looked sand blasted so looked at rear piston and it was just a fraction lower in the cylinder than the rest so it had a bent rod. Bought a newer wrecked truck for the engine and since it was newer i had to reuse the intake, fuel rail and injectors. Finally got it started and made a loud noise then had a missfire so checked compression and one was 20psi off. I guess a injector was stuck open and bent a rod in both engines. 😢😂

@Kowyn 11 ай бұрын

430s are good machines, only common issues I've hear are the fuel filter bracket cracking due to vibration and the hard plastic fuel lines getting tiny cracks and pulling air into the pump causing missfires. One at work has AC and it's ice cold, before the 430 we had a Thomas T133, also a good machine but the 430 runs circles around the Thomas.

@jakeschmidt4871 11 ай бұрын

Yea those cold starting advances never really worked great ever until warm. Changed solenoid once and only helped short term. Dont use cnh reman injectors they use soft china steel on injector tips and wear out really premature. From personal experience, had some new reman fail out of box too..

@mathewtodd480 11 ай бұрын

I love that giant ass crescent wrench

@servicioelectromecanicocue7025 11 ай бұрын

Fun fact. Today i have to go to towing a older Nissan 720, here in mexico "Nissan estacas", the truck tips over in a ditch, and yes, now the engine make fun noises

@crudnick 11 ай бұрын

The real question is how did it get tipped 🤣🤣

@bborkzilla 11 ай бұрын

Funny noises always sound like money through a shredder to me...

@h276wah7 11 ай бұрын

A good diagnosis, always made better when you have a good friend/colleague with experience to discuss a theory with.. (no such thing as coincidence - I agree Rich)

@allthingsoliver 11 ай бұрын

Always enjoy the videos with Kevin! The two of you are a great pair on camera.

@kevinoscarson2941 11 ай бұрын

Fyi the timing advance on the injection pumps in the 400 series case were notoriously for failure. The iveco engines also don’t run a key on the injection pump gear, so they can slip and loose time.

@dknust9 11 ай бұрын

We had a gehl skid loader I flipped. Same issue. Ended up being tweaked valves. A good head work and runs good again.

@ericmorin9613 10 ай бұрын

I was cooking on my stovetop while you were trying to do the compression test. I could not figure out for the life of me why my oven was beeping 😂

@diederickr 11 ай бұрын

I just bought an excavator advertised as smokey, tried injectors, then did compression test, 2 low cylinders. 2 bent rods.

@vickestr794 11 ай бұрын

Great seeing more content on the HD channel. Bummed for kevin though, hope the driver did not get hurt. Have gotten the impression that the skid steers can be a bit bumpy.😬

@johantryggvesson83 11 ай бұрын

love when you guys work on kevin's machines 👍🏻

@mrb1864 11 ай бұрын

Well we be seeing more of Kevin and the Case 430 which be a good thing for us . Hopefully some good one liners and engine tips/tricks to come . What not so good is Kevin getting a bit loose with the purse, man a whole new set of injectors, that so not farmer like :-)

@user-tp6xw6zl8t 3 ай бұрын

The two of you , make for very interesting and enjoyable viewing

@einfelder8262 11 ай бұрын

Apart from the diesel smoke there was oil smoke from the exhaust the whole time. Low compression on one cylinder identifies where it's coming from, likely scored liner and broken rings, and possibly bent rod, but could easily be all of the above. Running away on it's side is not a recipe for keeping an engine in good order...

@eddiereichel9354 11 ай бұрын

I'm voting for bent rod from oil and or fuel in cylinder

@juanfo7307 11 ай бұрын

Shoulda cleaned out the bores first or at least scoped it?

@c2c0rider 11 ай бұрын

Cracking vid - always enjoy Kevin content!

@jimlondon1 11 ай бұрын

Your mate Kevin is a stand out guy. 👍 always good to see him in your videos.

@gerardsteenbeek9327 11 ай бұрын

4:39 minutes in. I had a new Holland skidsteer doing the same and I know what the camporee is… love this channel!

@FishFind3000 11 ай бұрын

Bad injector could have hydro locked the cylinder and it split the piston or broke some rings.

@joernd8449 11 ай бұрын

I work on a case 930 comfort king that was knocking. 3 of the pistons were almost broken off at the piston rings because of bad injectors

@cromagnon305 9 ай бұрын

I spent a day chasing a misfire with very random compression readings on one cyl, turned out to be a broken valve spring, it sealed during the compression tests and ran decent on idle but missed on higher rpm

@TokyoCraftsman 11 ай бұрын

It’s great to see Kevin, I hope he gets his skid steer fixed. Cheers from Tokyo!

@JonRikhard 11 ай бұрын

Whenever you two are in a video together, it's bound to be a good one 😂👍

@garydault8805 11 ай бұрын

I like the Kevin farm repair videos always entertaining 😂

@bbro6154 11 ай бұрын

I believe that it WAS from the lay-over. Sediment in the fuel tank got stirred up and got sucked into the pump etc

@victorbitter583 11 ай бұрын

That's only half the story.

@timothymilam732 11 ай бұрын

There is someone who has the same luck I have, and I was beginning to think it was just me. Not that I wish that on him or anyone else, because it really sucks to go to all the headache of doing everything else only to have it fail in the end anyways. It is what it is, but dam it gets old quickly, especially when it happens every time.

@KnightsWithoutATable 11 ай бұрын

If you have water in your fuel supply or tanks, an additive for it should be used on all the engines in the fleet. Considering that you run this machine all the time, but it was second hand, I would just assume that any second hand equipment has the sludge of doom in the fuel tank and water as well, especially farm equipment. Since it all is stored outside/in barns, some is filled with cans, and all of the engines are old/rebuilt I would just assume that the fuel can get compromised in every piece of equipment. Just run the additive in all of them and lower your equipment downtime. You will also lower the money and time spent on fixing equipment because of fuel quality issues. Yes, your per hour cost for running the equipment will go up potentially, but in the long run you will save money since less stuff will break. Not full applicable to this situation since this engine got flipped, but the flip might not have caused any problems had all of those tanks of fuel that had been run through the skid steer had the additive that addressed this contaminant and others. Long term dilution, basically, of what sludge was in the tank.

@marscruz 11 ай бұрын

Great to see Kevin again. Good neighbors are the best.

@iowaoliverguy 11 ай бұрын

I want the 1365 Cockshutt sitting next to the skid steer!

@grahamsmith6474 11 ай бұрын

Just what your videos need……… More, Kevin! He deserves a medal.

@thethepete731 11 ай бұрын

I'm thinking you shortened a rod.

@douglasmayherjr.5733 11 ай бұрын

Great Video. Looks like a normal day on a farm. Thanks for the Videos.

@BurchellAtTheWharf 11 ай бұрын

42:34 and they say the 318 was under rated but this super slant 6 is a proper speed boat motor 😉

@callumdobbs3493 11 ай бұрын

Worked it so hard it meeded a lau down 🤣

@haydenwilliams1750 11 ай бұрын

14:26 when it's cranking you can hear one cylinder is off, it sounds like it dwells a bit on that cylinder.

@BurchellAtTheWharf 11 ай бұрын

Like it's over fueled?

@haydenwilliams1750 11 ай бұрын

@@BurchellAtTheWharf To me it sounds like something is binding, I don't think it's fuel related.

@BurchellAtTheWharf 11 ай бұрын

@@haydenwilliams1750 well with the compression that low on #2 it's probably closer to worse case scenario

@haydenwilliams1750 11 ай бұрын

@@BurchellAtTheWharf Yeah, if it was on its side running on its own oil you'd have to be very lucky to get away with that damage free! I wish Kevin the best, with that knock at the end I imagine they'll be going motor shopping at V&R.

@BurchellAtTheWharf 11 ай бұрын

@@haydenwilliams1750 V&R does love their business 😆, hope it's nothing major but I think it's gonna be a trilogy of saga fer this poor ole case. Water and dirt, the only natural enemy if a Cummins

@clintcowles7563 11 ай бұрын

Northern Michigan here. VanKalker construction. Petoskey Michigan. We just had our Kubota skidsteer tip over. Our shop guy had to come to the job and tear apart to top half of the engine. Oil in the cylinders from laying over like that. Just saying.

@sHoRtBuSseR 11 ай бұрын

You can kinda cheat with diesels and misfires. I bought a FLIR C5 camera for finding misfires fast, and it works awesome.

@merlepatterson 11 ай бұрын

Pretty cool seeing a 4BT Cummins in a skid steer. Maybe the first piston in the injector pump is receiving the bad fuel first and acting as a sacrificial (filter) piston for the rest of the pump and sending out the initial bad fuel to the first injector and that is the reason for your first injector failing every time?

@chrisegan327 11 ай бұрын

6bt conversion 🤠

@crezychameau 11 ай бұрын

Oh man, I hope you're gonna make it all better again when you have the time, Kevin seems so down at the end :(

@joedennison2972 11 ай бұрын

Another classic w Kevin! Sorry for the bad luck.

@BurchellAtTheWharf 11 ай бұрын

11:27 PrincessAuto is great

@ronsommer9409 11 ай бұрын

@2:59 The oil pressure light coming on when the key was turned on only means that the oil pressure bulb is not burned out. It does not mean that the oil pressure sensor or wiring is working.

@joernd8449 11 ай бұрын

Oil pressure sensors fail causing a false light. (The light coming on all the time) This is to prevent one from failing and you not being aware that it failed potentially causing damage from an actual low oil pressure situation.

@jeepanimal2943 11 ай бұрын

Sweet 1365......Big fan of Cockshutt, Massey and Versatile. You know, Canadian makes. Dang shame about the little Cummins. Here's the chance to do a DeBoss rebuild video.........

@ashboy225 11 ай бұрын

Looks more like the Iveco engine in that which is similar looking to the Cummins 4BT

@paulmach5 11 ай бұрын

It is 👍

@mullrump2 11 ай бұрын

Thank God Kevins back!!

@DGHD 11 ай бұрын

He lever left, we are just busy guys is all

@beunniemand 11 ай бұрын

The problem with these FPT engines are the injection pumps. There is a electronic valve on the side which is for timing advance, these need to be removed and put a normal spring and plate in by a diesel service. The injectors got stuck because the roller plate in the injector pump wears out and metal shavings get the needle stuck. Ive encountered these problems dozends of times. Kind regards from the Netherlands.

@christopherday210 11 ай бұрын

There's a place in Indiana called Sheid Diesel. The are people there that could write books about the B series cummins. I have a 12 valve a ran T 5000 psi back in the day. Still tough motors ive blown one up it takes a lot of fuel and throttle.

@bjre.wa.8681 11 ай бұрын

Are the injector holes big enough to get a bore scope head into?

@stumpy990 11 ай бұрын

These older diesel's were not meant to run on low sulfur diesel. They need that additive to make up for the lubricity

@keithmunz4160 11 ай бұрын

Yea Kevin is back!!!!!!!

@mikepaquette7950 11 ай бұрын

Bent connecting rod I would guess, did that on a duramax with leaking injector cups

@Modlendingen 6 ай бұрын

Hope to see Kevin on the channel again soon :)

@danielbremner7805 11 ай бұрын

As it turns out, both of your theories were correct!

@mikesmith-yc3os 11 ай бұрын

very interesting video great content guys

@matthewgray3375 11 ай бұрын

Kevin has the best tractors, those fiat built cockshutts are awesome, seems every developing country uses them

@jbrownjetmech-4783 11 ай бұрын

Every man knows that to have his injector stuck on the nut isn't always a bad thing. Most of the time it works out just fine.

@78Ratje 11 ай бұрын

Got one of these at work, European one though, there's a IHI motor in there

@anthonyblacker8471 11 ай бұрын

I believe that things tend to 'coincide' with one another but also have nothing at all to do with each other. Was the tipping over the catalyst to stick that injector? Who knows *maybe you figure that out I'm only to where he got it unstuck!)