Thanks Mark We used to represent Iron Fireman at one time. Loved those burners. I still have the Iron Fireman ashtray

Thanks I appreciate it

Thanks Rusty Steam systems require almost a holistic approach. I appreciate the comment

George Great question., When adjusting the burner gas pressure, it is against the pressure inside the combustion chamber. In most instances, the combustion pressure is slightly positive. This boiler was supposed to be +0.15" wc with a draft at the boiler outlet of -0.05"wc. Since the draft was ten times more than the manufacturer recommended, the combustion chamber went negative. You would have to increase the gas pressure to reach the gas pressure set point since the chamber is negative. Once the draft was at the proper amount, the gas pressure was too high. Hope this helped Ray

@@boilerroomdetective Amazing and awesome explanation. We never stop learning. Please never stop teaching. I just learned something new.

@@georgebrett4289 Thank you very much

Stephen steam systems can be very efficient if installed and operated properly. The Empire State Building in NY has steam heat and has a Leed gold certificate

@@boilerroomdetective Areas of application here in Germany for steam heating systems. Fields of application Steam heating is hardly used in office and private buildings. It is mainly used in larger buildings such as exhibition halls or warehouses. Here it is characterized by low operating costs. Another advantage is that it heats up large rooms quickly. The poor controllability and the high space requirement are disadvantages that make steam heating unsuitable for conventional private houses. The use of a steam heating system is particularly useful where process steam is generated. This is the case, for example, in industrial laundries or commercial kitchens. In this way, the steam that is generated anyway can be used for heating..

@@Metal-never-die1220 Stephen, We do not see low pressure steam used much on new buildings in the US anymore because people believe it to be inefficient. We are getting away from fossil fuel fired heating systems over here. One of the benefits of steam systems is the distribution costs. It takes less than one ounce of steam pressure to transport steam one hundred feet. That is much less than air or refrigerant distribution costs. Thanks for the comments. Hope you are staying warm over there. The resurgence of steam boilers here is due to the microbreweries opening. Most use steam in the brewing process.

@@boilerroomdetective Thanks for the info, I wish you a Happy New Year

@@Metal-never-die1220 You too sir.

Steam systems need to breathe. When the boiler starts, it will push the air from the piping so the steam can enter.At the end of the steam cycle, the steam starts to condense. When this happens, air rushes in to take the place of the steam. If there is a blockage in the condensate pipe, the air cannot return to the system. When this happens, the system goes into a vacuum. I am not sure if this is a one or two pipe system. If it's a one pipe, I would check the air vents for blockage. If it's a two pipe, I would check the traps to be sure they are not filled with dirt, blocking it. Hope this helps