How To Make an Acrylic Baby Milestones Set

How To Make an Acrylic Baby Milestones Set | Cricut DIY

Рет қаралды 31,382

Күн бұрын

This video is a step-by-step tutorial of How To Make an Acrylic Baby Milestones Set! I hope you enjoy this tutorial and if you have any questions please comment them down below and I would love to help! Thank you so much for watching!
SHOP MY AMAZON FAVS
www.amazon.com/shop/cassiecou...
Shop my LTK
www.shopltk.com/explore/Cassi...
// ITEMS USED IN THIS VIDEO
4” Acrylic Rounds - amzn.to/3yKJVFU
Folkart Paint - amzn.to/3bUTLfC
Valspar Paint - www.lowes.com/pd/Valspar-Hops...
Vinyl - amzn.to/3OQMdJe
Scissors - amzn.to/3yk1VFJ
Transfer Tape - amzn.to/3yJQwAr
Squeegee with Felt Edge - amzn.to/3aeGwGh
12” x 12” Cutting Mat - amzn.to/3nG5C3K
Weeding Tools - amzn.to/3IiYjZe
1” Foam Brush - amzn.to/3ynz17S
Cricut - amzn.to/3NNMUBG
Macbook - amzn.to/3ImCTuu
// FONTS USED
KLOTEE - www.creativefabrica.com/produ...
ADELIA - www.dafont.com/adelia-3.font
Other font recommendations:
CATTOMS CUTE - www.creativefabrica.com/produ...
HANDITA - www.creativefabrica.com/produ...
BOHO BABY - www.creativefabrica.com/produ...
ELIZABETH - www.creativefabrica.com/produ...
Click the link below to receive your first month for only $1 and 35% off of your monthly subscription with Creative Fabrica!
www.creativefabrica.com/ref/5...
// FOR YOU
⤬ Get your first 40 Etsy listings for FREE - etsy.me/3BKpmYT
⤬ Click the link below to receive your first month for only $1 and 35% off of your monthly subscription with Creative Fabrica!
www.creativefabrica.com/ref/5...
// S U B S C R I B E
/ cassiecouncil
New Videos Every Week!
// F O L L O W
I post updates in real time of my life and business!
Instagram | / cassiecouncil
Business Instagram | / goodandlovedco
Email | contactcassiecouncil@gmail.com
// G E A R
Camera - Canon M50 - amzn.to/3D1H8Ij
RODE Microphone - amzn.to/3bZlhoQ
Ring Light - amzn.to/3o894DW
Tripods - amzn.to/3F1KCuZ | amzn.to/30jov4l
Computer - Apple MacBook Pro 13” amzn.to/31CZeCw
Editing Software - iMovie
// C A S S I E
Hello! I'm Cassie and I'm a full-time entrepreneur. I own an aesthetic acrylic business based in Dallas, Texas called GOOD + LOVED CO. This channel, takes you through my journey of building my business from the ground up, while sharing information on how I market, strategize, and operate in my business to hopefully help you build yours! I also post videos on FAITH and BEHIND THE SCENES of how I create my acrylic products!
*Disclaimer: Some links are affiliate. By clicking and or purchasing, I may receive monetary reward. It does not alter the price or change your buyer experience.
**Disclaimer: This video is not sponsored.

Пікірлер: 64

@hyun8282 2 жыл бұрын

Oh.. very good .🌻👍

@jenniferdudley5443 Жыл бұрын

Cassie you have inspired me to try my hand at using acrylic blank.! Thanks so much for this fantastic video!

@CassieCouncil Жыл бұрын

That’s amazing! Congratulations! Of course! ❤️

@GoodVibesbyadelie Жыл бұрын

tysm

@jennr591 Ай бұрын

Hi Cassie! I just found your videos and this is SO helpful, you have no idea. Do you have any other videos up where you paint the full side? I've been struggling with this with (a) making a mess and (2) not getting a full gloss effect and wondering if you had anything up already that I might have missed. Thank you!

@CassieCouncil 29 күн бұрын

Thank you so much! I do have a few work with me videos where I paint the entire side! My most recent video does have a set where I paint the entire side if you'd like to check it out! ❤️

@robynjinkins8314 2 жыл бұрын

Beautiful! Do you recommend adding a coating to the paint to keep it from scratching? I love these so much!

@CassieCouncil 2 жыл бұрын

Hi Robyn! You can totally add a thin coat of polycrylic to the back to keep the paint from scratching! Thank you so much for watching! ❤️

@robynjinkins8314 2 жыл бұрын

@@CassieCouncil thank you! 🤗❤️

@moniquekalook Жыл бұрын

@@CassieCouncil Hello!! do you think mod podge would work the same also?

@CassieCouncil Жыл бұрын

It might! I’ve never used Mod Podge before, but I have seen others use it! It’s definitely worth a try!

@Trending_Wor16 2 жыл бұрын

Do you recommend making sample acrylic signs or use pictures of similar items to market what your business will sell?

@CassieCouncil 2 жыл бұрын

Hi Nicolette! I would say to always make sample items if you can! It gives you practice at making that item and then you can take beautiful photos that will be original to your shop only! Thank you for watching! ❤️

@jessicaort3ga Жыл бұрын

Hi loved this tutorial! you explained everything so well, I'm going to start off by making little circle keychains. Just had a quick question did you pay for those fonts separately? I have Cricut design space and can't find those fonts. and I loved them!

@CassieCouncil Жыл бұрын

Thank you so much! I use Creative Fabrica for all of my fonts! I pay a monthly fee to access their site! I have a discount link for them in the description box if you'd like to check them out too!

@tracymore760 Жыл бұрын

Hi Cassie I’m loving your videos and tutorials and I was wondering what it is you use between the acrylic rounds when you send them, looks like tissue paper but I’m not sure. Many thanks

@CassieCouncil Жыл бұрын

Thank you Tracy! It’s parchment paper! I cut it down to 4x4 inch squares ❤️

@valentinamarsden9981 Жыл бұрын

Thank you! Going to do it for a friend! Do you not have to seal the paint at the back?

@CassieCouncil Жыл бұрын

Thank you! I hope it turns out great! Yes, you can seal with Polycrylic!

@nemizejeftha7775 Жыл бұрын

Do you sticker the vinyl directly.on the painted side or the side at the back (where u removed the protective layer)

@CassieCouncil Жыл бұрын

I apply the vinyl to the unpainted side (the back)!

@imanitraylor2093 Жыл бұрын

Thank you for the video. Approximately what width and height did you make your fonts?

@CassieCouncil Жыл бұрын

Of course! Most of them are a little less than 3 inches (width) by a 1.5 inches (height). It really does depend on the length of the words though!

@sukijones6956 Жыл бұрын

Hi Cassie, are these intended for use when photographing the baby at each of the monthly milestones? If so, how or where would you suggest they be displayed? Thank you!

@CassieCouncil Жыл бұрын

Hello! Yes, they are intended to be used as photo props for baby photos each month! They can also be used during pregnancy to document month by month! ❤️ I’ve seen most people just lay them next to the baby and take a photo or have the baby hold it!

@Ashley-zc5en Жыл бұрын

When you paint - do you do multiple coats when you paint the whole round? If I do one or two, it looks good unless I hold it up to light and then you can see the brush strokes. Not sure If I should keep going until it is totally opaque? Also, if you get some paint on the edges...do you go back and scrape it off? Thank you for teaching! Your videos are so enjoyable.

@CassieCouncil Жыл бұрын

Thank you so much! ❤️ I usually do 2 coats! I also use really good, thick paint and that helps a lot too! I use the brands Folkart and Valspar. For the paint on the edges, I just use my fingernail or a sharp edge of scissors to gently knock off any paint there! I hope this helps!

@Ashley-zc5en Жыл бұрын

@Cassie Council Thank you! I ended up just binging your videos yesterday and learned so much. Your videos are so relaxing. I really enjoy watching your process!

@heatherrock6020 Жыл бұрын

Does the vinyl go on the painted side, or the other side? Thanks

@CassieCouncil Жыл бұрын

Hi Heather! The paint goes on the back side and the vinyl goes on the front! I hope this helps! ❤️

@heatherrock6020 Жыл бұрын

Thank you!

@emimari4184 Жыл бұрын

Hi! I currently bought a cricut maker and i wanted to know what blade did you use

@CassieCouncil Жыл бұрын

Hello! I use the premium fine point blade! It’s just the regular blade that comes with the cricut!

@phoebericafort525 Жыл бұрын

What type of vaspar paint did u buy?

@CassieCouncil Жыл бұрын

I bought the Valspar paint sample in the color Hopsack!

@melodievaillant3155 Жыл бұрын

Which transfer tape do you use?

@CassieCouncil Жыл бұрын

Hi! Here is the link! amzn.to/3yJQwAr

@missychase627 Жыл бұрын

Hello! Do you skip sealing the painted surface? Is it not necessary?

@CassieCouncil Жыл бұрын

Hello! Yes, I seal with Polycrylic! ❤️

@tasleemshah9012 Жыл бұрын

Which setting did you cut on?

@CassieCouncil Жыл бұрын

I use the permanent vinyl setting ❤️

@annpatt2273 Жыл бұрын

hi can I use spray clear coat on the back?

@CassieCouncil Жыл бұрын

Hi Ann, I’ve never tried the spray clear coat but I’ve heard it’s great to try!

@annpatt2273 Жыл бұрын

@@CassieCouncil thank you!!

@KellyStevens-yv5jn Жыл бұрын

Hi, what do you seal the paint with?

@CassieCouncil Жыл бұрын

Hello! I use Polycrylic!

@afrozamaster949 7 ай бұрын

hey there could you please advice me on how to bring both the words together using the attach button on the bottom right because when I try doing it ,it doesn't merge.

@CassieCouncil 7 ай бұрын

Hello! Try using the weld tool ❤️

@manetteb.8198 Жыл бұрын

How do you avoid it being see through after painting? And how to not see the steak of the paint brush?

@CassieCouncil Жыл бұрын

I use high quality paint and do 2 coats! The brands I use are Folkart and Valspar! ❤️

@pamelasmallwood5722 11 ай бұрын

@@CassieCouncildid you use a flat, satin or semi-gloss paint?

@apz232 8 ай бұрын

Can you only use acrylic paint?

@CassieCouncil 8 ай бұрын

I've only used acrylic paint, but I'm sure other types of paint are worth a try as well!

@xionglm87 Жыл бұрын

Do you need to seal the paint in the back from chipping?

@CassieCouncil 11 ай бұрын

Yes! I seal with Polycrylic!

@xionglm87 11 ай бұрын

How do you seal it without it getting streaky? Do you only seal the paint side?

@CassieCouncil 11 ай бұрын

@xionglm87 yes! Only seal the painted side!

@xionglm87 11 ай бұрын

@@CassieCouncil ok thanks! How do you seal it without showing streak lines?

@RebeccaBancarz 7 ай бұрын

Hello I followed all of the instructions but once I attached all of the numbers and months and clicked make it, it’s saying that my image is too large and to either continue with a larger mat or cancel, but I tried following all of the measurements for the fonts correctly. Do you know why it’s doing that? Thank you

@CassieCouncil 7 ай бұрын

Hi! You may need to move each of them closer together and click "attach" so that they will all stay in place when you're going to send it to the Cricut to cut. I put mine super close together to save on vinyl and it helps me cut more at one time! I hope this helps!

@RebeccaBancarz 7 ай бұрын

@@CassieCouncil thank you! I ended up figuring it out, I put them all in a square shape and then erased the square just to know how much space I have!

@RebeccaBancarz 7 ай бұрын

Hello :) was that just one coat of paint?

@CassieCouncil 7 ай бұрын

Hi! I typically just do one coat of paint but sometimes if I am using a thinner paint, I will go back and do a second coat so that the brush strokes are not peeking through!

@RebeccaBancarz 7 ай бұрын

@@CassieCouncil thank you 🤍