CAT D8R DOZER: FULL MACHINE REBUILD

Рет қаралды 399,043

9 жыл бұрын

The Gough Cat service workshop and Component Rebuild Centre (CRC) in Christchurch have been a hive of frantic, but highly focused, activity as a United States Antarctic Program Cat D8R Dozer was diassembled and completely rebuilt.

Пікірлер: 140

@markbaker3172 2 жыл бұрын

I never get tired of seeing this either in USA or any where else cat takes care of the customer,,,cheers

@thadlm2698 3 жыл бұрын

Great rebuild job👍🏿

@ioannisiordanidis3562 5 жыл бұрын

Wonderfull to see! Taking care of an honest old workhorse. You take the old, you make it new. As it should be.

@gesawilberforce5382 4 жыл бұрын

Nice workshop great

@turboslag 7 жыл бұрын

That won't have been cheap, but the machine deserved it, top job!

@timmayer8723 4 жыл бұрын

turboslag rebuild cost north of 400,000 USD.

@Seankamrath 4 жыл бұрын

@@timmayer8723 which is probably pennies to these companies compared to the value these machines offer.

@maxpuppy96 4 жыл бұрын

That dozer is probably better then when it came out of the factory for sure

@TheRebelOne. 7 жыл бұрын

Nice rebuild project. Hats off to CAT yet again.

@FU-wd9sl Жыл бұрын

Wie neu ! Saubere Arbeit.

@marinekid2006 8 жыл бұрын

Astonishing. Glad to see top quality work, especially when it comes to Cat equipment.

@elhadjidio1332 4 жыл бұрын

stl

@Stoparts 4 жыл бұрын

Best channel colleagues Regards from Stoparts Ltd

@C8mon 5 жыл бұрын

Great job nice to see people take pride in their work and do it right.

@rogerstrand4903 4 жыл бұрын

Very impressive Cat Rocks

@johnharrison8172 5 жыл бұрын

Beautiful job , well done

@stressbelden5869 7 жыл бұрын

Great vid. Best of luck to the shop crew.

@KPearce57 5 жыл бұрын

Thats a Cool Cat living it's life on the ice.

@LYEARTHMOVERS 6 жыл бұрын

Impressive job done!!!

@MirceaD28 5 жыл бұрын

This how a proper rebuild is made.

@trevorgough942 5 жыл бұрын

Who disliked this video,and why ?? Why are they watching if they don’t like it ?? Must be really short of something to do...or just sad ☹️

@vipermarn 3 жыл бұрын

@Gregory Bostrom Geess you are dumb.. And silly

@epistte 3 жыл бұрын

They work for Komatsu, Liebherr, and Volvo.

@shanemb3 Жыл бұрын

Possibly accidental

@chamilasuraweera8323 Жыл бұрын

Great job.

@robinssonpenadillokachahua5379 4 жыл бұрын

bonitos recuerdos con el D8R

@kanahele1 6 жыл бұрын

Amazing stuff

@8068 5 жыл бұрын

Greetings to all at Gough Cat from Milton Caterpillar

@michaellapierre8577 5 жыл бұрын

Hello to all at Gough Cat aswell as Milton Caterpillar from Toromont Cat!

@8068 5 жыл бұрын

Greetings Toromont Cat from Milton Caterpillar.

@user-jv7kr1rg5k 4 ай бұрын

Good job 👍

@lathamarea1437 5 жыл бұрын

I enjoyed watching your video...

@human3444 3 жыл бұрын

I also.

@Andrewlang90 5 жыл бұрын

I was surprised to see the lathe operator using high speed steel tooling for the hydro cylinders vs carbide inserted tooling. Usually Sandvik has their dirty hands on everything lol j/k. Love the video, love the rebuild of equipment that builds the ground of the shop it’s being rebuilt in.

@joshieOle87 5 жыл бұрын

Sweet video

@jasminhelac1229 6 жыл бұрын

Very good!

@abecoulter18 5 жыл бұрын

My grandad brought cat equipment off goughs for the lake benmore hydro dam build

@bosshoss69lee 5 жыл бұрын

Damn thing looks brand new, 13,000 hours and over 90% still Cat yellow, gorgeous shop btw

@als8518 5 жыл бұрын

its probably never pushed dirt, just snow

@catdieselpower193 8 жыл бұрын

great job boys! cheers

@mudassairmuneeb3486 6 жыл бұрын

cat lodr 966 F repair daefferenchr

@jahangirhammid5254 6 жыл бұрын

CAT DIESEL POWER j

@zeeshan_engineering_services 6 жыл бұрын

+Mudassair Muneeb it's spell differential or called final drive in Caterpillar glossary

@angelosmith8755 4 жыл бұрын

D8 R 3406e it's Amazing , I have a chace to assembly 2 engines Like this.

@romanibukharst9517 7 жыл бұрын

nice work

@TRX450RVlogger 5 жыл бұрын

What amazes me is that an Air Plane can even get off of the GROUND then it's got a 50 Ton Dozer in it on top of that

@JJ-jv1gu 5 жыл бұрын

TRX VLOGGER Bernoulli’s principal

@tfi6279 5 жыл бұрын

Well it doesn't weigh no 50 ton

@kwmiked 5 жыл бұрын

No even close to 50ton without attachments. Probably around 30ton

@JJ-jv1gu 5 жыл бұрын

Kwmike-D Maximum payload capacity of the C-17 is 170,900 pounds, and its maximum gross takeoff weight is 585,000 pounds. With a payload of 130,000 pounds and an initial cruise altitude of 28,000 feet, the C-17 has an unrefueled range of approximately 5,200 nautical miles. Its cruise speed is approximately 450 knots (.77 Mach).Apr 25, 2000

@brianmccutchan9513 3 жыл бұрын

Thumbnail is a duo cone seal. It is .7244" tall x 10.066" dia. At the top I like to use a .035" chamfered and then at .1457" it goes to 10.101" and down at a 10 degree taper to the bottom with a nice radius both top and bottom. I use .059".

@davidanalyst671 3 жыл бұрын

I can tell you why this job took over a thousand man hours!! 3:02 was dr house, 3:08 was Liev Schrieber, 4:44 was Sean Bean after he been quarantined with a couple pints of ice cream.

@sighpocket5 6 жыл бұрын

Nice!!!

@pauljanssen2624 4 жыл бұрын

If my mid-30s I totally rebuild a 750 komatsu from tracks up everythingit took me two weeks just to steam clean all the parts and we're talkin all the parts 240 hours

@vipermarn 3 жыл бұрын

Write a book bro!

@ionracer24 6 жыл бұрын

Badass

@rajeshregothi6780 5 жыл бұрын

How much it would cost to rebuild if use all oem parts then I guess it's as good to buy new D8

@doberman.srb89 5 жыл бұрын

250.000

@williamsshane21 5 жыл бұрын

What is the cost difference between buying a new one and the complete rebuild done here? It would seem that rebuild would be very expensive.

@godbluffvdgg 5 жыл бұрын

About 1.5 million

@axamen7787 5 жыл бұрын

nice

@johnshaft5613 5 жыл бұрын

It seems like a rebuild/restoration of that scope would cost as much as or more than simply buying a new tractor. Every aspect of the machine has been gone through, but without the efficiencies of the factory assembly line.

@C8mon 5 жыл бұрын

Except for fabrication and assembly of major components not to mention the chassis of the tractor itself. I think if it was cheaper to buy a new one they would have bought a new one. My guess is it would by close to 80% of the price of a new one.

@dadillen5902 5 жыл бұрын

They outlined up front the one of a kind design. So, no a new one would not cost less.

@waynep343 6 жыл бұрын

i think that i might have painted the individual components with it apart.. to get better paint coverage to the hard to get at areas since it is exposed to extreme weather conditions. might be something to do to the main frames, cabs and undercarriage sections for regular rebuilds.

@danielhanney3326 6 жыл бұрын

I agree, the Track shoes were kinda rusty looking, could have been shot blasted and repainted before re-assembly for longer life..

@oldpete3153 5 жыл бұрын

@@danielhanney3326 if you'd have paid attention you would have noticed that the machine had both new rails as well as new pads intalled and left the dealer all painted up. One other point...that unit would have no paint left on those pads after 6 months of use.

@kwmiked 5 жыл бұрын

Why? It's all gonna wear right off

@puksrasohchurrun 5 жыл бұрын

Wish transdiesel would do this for dressta

@TurboBMRProjectLove 5 жыл бұрын

AMERICAN POWER!

@EliminatorPerformance 6 жыл бұрын

You gota wonder what the cost of something like that would be, my guess is upwards of $100,000 Seeing as how that cargo plane alone would cost $10,000 a flight...

@TurboGSR96 6 жыл бұрын

100k might buy you an engine, it cost 200k to do a CPT (certified powertrain) on a D8T

@warphonesS22 5 жыл бұрын

purchasing a unit might cost $2 million. Refurbishing. I'm thinking $300,000 plus

@pajapajic8809 5 жыл бұрын

@@warphonesS22 Kosta cela reparacija najvise 20.000$

@0011clem 5 жыл бұрын

I think it would cost a lot more than that for a flight to new Zealand. What would it weigh without the blade , 50 tonnes ? to get that amount of weight up into the air and fly would burn lots of fuel. and cost a lot. I would say 400k all up for everything . And you need one of those down there to run over 'the thing' if they ever encounter one in the ice one day .

@connerfleury7 5 жыл бұрын

@effinghamhick no way. That machine new cant be anymore than 500k. On off parts always cost more than if u bought a hole bunch. Im sure given the work load their was a price break on parts and such. And considering the factory did it helps alot to. But hey thats just the trade we are in. I paid 450$ for 2 hydro lines for my Hitachi.

@marciobatista8252 5 жыл бұрын

engenharia fudida👏👏👏👏

@freebird7284 5 жыл бұрын

$750k out the door inc freight

@weswest8666 5 жыл бұрын

f r e e b i r d 1,000 labor hours, assuming $250k was parts do they charge $500 per hour for labor??

@wiztard_ 5 жыл бұрын

@@weswest8666 no but it looks like there were multiple people working on it at all times

@MrJneesy 5 жыл бұрын

dont forget transport that beast is expensive to move

@ryanr2n2yc 5 жыл бұрын

i would say add a zero to that number. it was the u.s. govt footing the bill afterall

@davidanalyst671 3 жыл бұрын

lolz a d8 isn't worth that new

@kphillips7922 5 жыл бұрын

Imagine how much gas the a/c unit holds.

@eugenejulson8742 5 жыл бұрын

What? No fuzzy dice 🎲? Send it back.

@bundysgarage 5 жыл бұрын

That's awesome! Would have loved to be on the engine team!

@shortchange26 5 жыл бұрын

I would work for room and boarding for the opportunity to work with those guys.

@frankrodriguez7468 5 жыл бұрын

It may have costed over $80k but can you imagine how much it would earn? Crazy stuff but nice to see what goes into it.

@mindquad779 Жыл бұрын

This is an amazing video, thank you... but based on his face at 6:28 I don't think they finished on time or on budget lol

@user-rv6yc5tv8t 5 жыл бұрын

Like 👍

@megason2 5 жыл бұрын

I love seeing one of these rebuilt but i love how the us paid another cat in another country to rebuild it instead of a cat dealer in the usa

@knightlife98 5 жыл бұрын

It is far more efficient to take it to a CAT Dealer, closer to where they run the equipment.

@knightlife98 5 жыл бұрын

@Leonard Carr You're kind of all over the place there, my friend. I'm sure they do a fine job on the equipment, down there in Christchurch. But, I hope you're not saying that another CAT Dealer, couldn't do the same job, just as good?

@FishFind3000 5 жыл бұрын

Leonard Carr I’ve seen there Peoria location before they closed it down. It’s bigger than a small town. It’s miles of factory.

@animenut69 5 жыл бұрын

Cat shut down that peoria plant?

@KJ6EAD 5 жыл бұрын

All air traffic to and from Antarctica goes via the airport in Christchurch. The dealer is less than five miles from the airport. Shipping by sea would have deprived McMurdo of the the D8 until the next summer, almost a year.

@joseiradilson6836 2 жыл бұрын

Sou mecánico . E ESTOU MARAVILHADO COM ESTE TRAB.

@danmart1879 5 жыл бұрын

Amazing!!!!!

@scowell 4 жыл бұрын

The link is broken... now it's called Terra Caterpillar, not Gough.

@gazof-the-north1980 3 жыл бұрын

Alot of people actually prefer an R model to a T model

@bookeruzzell6213 3 жыл бұрын

Looks like that old cat don't take no sh#t!

@rolandoruto3647 5 жыл бұрын

i feel good sir i the one repairing of d8r SER Caterpillar D8R 7XM Caterpillar D8R 9EM Caterpillar D8R T5X Caterpillar D8R II 6YZ Caterpillar D8R II AKA

@kwmiked 5 жыл бұрын

Those all model #s even American

@tellmesomething2go 8 жыл бұрын

COST OF REBUILD.

@godbluffvdgg 5 жыл бұрын

211.00 US...

@michaelsclark 6 жыл бұрын

is that an st wrench at 3:05 dont tool lock😳😛

@zeeshan_engineering_services 6 жыл бұрын

hmm I believe it's torque wrench

@michaelsclark 6 жыл бұрын

Zeeshan Ahmad yeah but if it's digital at the Caterpillar plant it's called a St wrench😊

@zeeshan_engineering_services 6 жыл бұрын

+michael s. clark thanks I appreciate you at all

@metalheadpsycho2486 5 жыл бұрын

Just imagine doing an oil change on that

@Tigersfan829 5 жыл бұрын

Fucking thing probably takes 10 gallons

@KPearce57 5 жыл бұрын

@@Tigersfan829 Try 15 to 18 gallon depending on oil pan about 110 hydraulic oil.

@skeetersaurus6249 5 жыл бұрын

$200,000 machine (at 13,000 hours) with $500,000 rebuild...$700,000 vs buying a NEW UNIT for $950,000...gotta love how government 'service contracts' work...

@ThatcherKSA 3 жыл бұрын

That's still $250,000 in your pocket and basically a new machine.

@michaelsclark 6 жыл бұрын

one more thing i noticed a lot of yr guys arent wearing gloves or sleaves were is there ppl?

@anthonyjackson4982 5 жыл бұрын

Kiwis mate!

@bestamerica 5 жыл бұрын

' very good clean vehicle, must use clear guard safety eyesglaases, safety hats... workers are NOT needing -- 1- coooool tint sunglasses 1- caps on the heads

@renemensink5792 5 жыл бұрын