Cat's massive 657G scraper working in California for LB3 Enterprises #bulldozer #excavator #scraper
Пікірлер: 299
@andresnavara40916 жыл бұрын
Muy buenos operadores de maquinarias calidad. Amigos gracias
@kfstreich47875 жыл бұрын
Is this what you do all day? Watch CAT videos?
@theoBaba7738 ай бұрын
Yes 😂
@Sahil.Qarayev6 ай бұрын
zordu
@dennisholst43226 ай бұрын
They still running the 660s
@dennisholst43226 ай бұрын
This is Production
@racerssb2iscool5 ай бұрын
Yeah then whats your problem?
@kevinjasper66204 жыл бұрын
Wow ,The 657 makes the D8 look small , 😎
@dennisholst43223 ай бұрын
Good
@ConstructionMachinesChannel6 жыл бұрын
The D8 looks small beside the 657. Cool project to be involved on. Super video 👍
@geraldlrstubbs5 жыл бұрын
Yes, a D8 is a mis-match with a 657.
@langdons284811 ай бұрын
So true. A D8 is not a small machine. The 657s are just enormous.
@dennisholst43226 ай бұрын
You can't hardly see the exhaust stack from a 57
@dennisholst43226 ай бұрын
Slope board Sally gives a clue where she is
@dennisholst43226 ай бұрын
After running 57s anything else is a dink
@bushwacker32926 жыл бұрын
Jean Phillips would be proud of y'all 👍
@cbcoastalgroundwork8315 жыл бұрын
That's awesome!!!!
@williamsimmons28936 жыл бұрын
great video do you work right on the site to get that up close a view?
@ret8744 Жыл бұрын
loved this machine! 💯
@gulshankumar-cv9qk3 жыл бұрын
awesome to see two beast working together.............
@randyminnick88675 жыл бұрын
That's the smoothest and best push-Cat driver I've ever seen! The guy is good!
@MotoScootMech4 жыл бұрын
Even with some worn out track shoes!!
@annisaferdeaniwidyastika11263 жыл бұрын
Jsjsks
@DeerPlot3 жыл бұрын
Its relatively easy pushing pans guys lol
@tassi138273 жыл бұрын
The scraper should never stop, that way the push cat can just catch up to him and make contact without a bang. Hard thing to teach scraper operators.
@sparkydog25 жыл бұрын
Danke für diese tolle video! (german) Thank's for this great video!
@FabFunty4 жыл бұрын
* dieses tolle Video / diese tollen Videos bitte achte auf deine Rechtschreibung , es könnten deutschsprachige anwesend sein 😂
@tutekohe13616 жыл бұрын
Cat 657, front engine 600hp, rear engine 450hp, bowl capacity 33 cubic metres. With the assistance of the D8t, it's loading it's 47t of clay in less than 30 seconds. That is real production.
@cbmech25636 жыл бұрын
Tu te Kohe Struck load capacity on a 51/57 is 48 yards. With side boards and heaped load 50 to 53 yards
@jcs15176 жыл бұрын
33 cubic metrs of clay,is a lot more than 47 (metric)tons,i think,it should be around 60 tons.
@cbmech25636 жыл бұрын
J Cs Figuring 50 yards average heaped load at an average of 3000 lbs for most material that works out to 75 tons
@curtkillingsworth14195 жыл бұрын
That is cool, I like it and it’s a BEAST! But may I kindly ask why they do not produce a scraper that would be able to self load, while keeping proper load speed of course, but do it without the help of a pusher dozer or Mr. Chuck ‘Plz don’t push me around’ Norris? Serious question. I’m sure it’s a size thing, it would be a behemoth, this I am sure of.
@kfstreich47875 жыл бұрын
I think we can all agree this guy is going to have to run the coops
@splodinlogan89963 жыл бұрын
Fourth day running a scraper today I got 164 loads in 637E
@bobdyer4226 жыл бұрын
That's bigger than my Tonka Mighty Scraper! What a BEAST! That pit is bigger than my old sandbox also, Oh well!
@louiscecchini7834 Жыл бұрын
Nice ,smooth pickup the scrapper. Nice touch
@ThatBladeMan4 жыл бұрын
Sweet video!
@briankrzyzaniak69873 жыл бұрын
D8 pushing a 657 > sort of like a mosquito on the rearend of an elephant
@Drottninggatan20175 жыл бұрын
It's amazing how clean those engines are running.
@likeaboss8602 жыл бұрын
Low elevation they're already hot plus low humidity.
@likeaboss8602 жыл бұрын
A diesel engine is much less harmful to humans because diesel particulates settle
@dennisholst43226 ай бұрын
Turn em up
@salmanskippy2 жыл бұрын
Big projects. Big machines. Big California.
@mitchellsavage3135 жыл бұрын
I run a water truck for Marlins out of San Diego. Lb3 rents our trucks love my job
@dennisholst43226 ай бұрын
Is Templeton from San Marcos still working
@robertr01rr3 жыл бұрын
Reminds me from when I used to work in California for a company called wood brothers.
@gilmarbombeiro3 жыл бұрын
Na epoca em que eu trabalhava em terraplenagem so via essas maquinas nas revistas
@alastairsutherland93412 жыл бұрын
As you can see the 657 isn’t getting a full load, two tractors ( 9’s or 10s ) tandem pushing is needed to achieve the optimum production, a valiant effort by the 8T operator though.
@harpalbajwa85822 жыл бұрын
First time i saw Grader blade fixed with Dozer . Great.
@ferrazdeazevedo6045 Жыл бұрын
Isso 'e um trabalho de muito valor
@davidnazario6646 Жыл бұрын
Cool machines 👍🚧
@jimdorman15506 жыл бұрын
Mr 8t has it!
@bobdyer4226 жыл бұрын
Question, the device behind the plow blade GPS?
@brennansexcavations6 жыл бұрын
bob dyer GPS receiver
@jasemmuhammad99074 жыл бұрын
من احسن المعدات الثقيلة بالعالم
@gm16v1496 жыл бұрын
Disappointing neither of them has a V configuration engine. Oh well. I guess the scraper has a C18 but not the same sound as a 3408.
@gm16v1496 жыл бұрын
Donald Clark.. Who, me? LOL.
@cletrac12c726 жыл бұрын
Just like the new D11's they dont sound good at all!!!!!!
@rodleypumpkins41746 жыл бұрын
gm16v149 the scraper is dual engine by the way.
@dellclinton95154 жыл бұрын
Somebody please tell me, what mine company use this scraper?
@yammyharrone2 жыл бұрын
Interesting D8 that with it's side blade! 😍
@timb77759 ай бұрын
Yes, thats used to push more dirt. When you mount a blade like that on the side you have more dirt you can push around.
@Creeperboy0995 жыл бұрын
Wow that D8 just got dwarfed
@jeffharris2063 жыл бұрын
Poor little Dozer I can remember the days, when I was made to push 627s with a D7h😭 wishing I had the 8k or 9g, then years later I was on a brand new D9L pushing 631d's wasn't allowed to push them with 10L too powerful could tear the floor out!!!!
@alexiosneal31962 жыл бұрын
Those D9Ls were so powerful
@teamwoodswarriorsracing20046 жыл бұрын
660s were bigger as well, no longer produced but still bigger
@mikejacksonfarms4 жыл бұрын
D10/11 would be a lot better, the scrapers are lifting with half loads
@richiebankard87695 жыл бұрын
Guy running around with half a load???
@LoBeau533 жыл бұрын
It looks like they are working to grade and that is the end of the cut so he has to take what he can get.
@briangardiner10156 жыл бұрын
Usually you don't use this small of a dozer to push with. I am guessing it is near the end of the job and everything else has been shipped to another job. Talk about a jack of all trades. This D8T has a sloper attachment and a GPS antenna for checking grade. I think that is what he was doing when he was using his dozer blade to push dirt with near the end.
@briangardiner10156 жыл бұрын
Cakes Man could it have been the end of the job and just needed a small quanity of dirt to be moved?
@briangardiner10156 жыл бұрын
Cakes Man unfortunately a video is a brief snap shot of what is going on.
@YotaLizard5 жыл бұрын
Agreed, an 8T is a bit on the small side to be used as a Pushcat, normally.
@lesflynn44553 жыл бұрын
I see D8s pushing all the time, but they're pushing 621s 😂
@waynerainey26065 жыл бұрын
Clay... In California it's mostly decomp I spent a lot of time moving mountains and filling canyons for the ridiculous housing market. Had a really big job some years back in temecula where they moved one mountain to fill a similar size canyon to build houses and golf courses over both! the canyon was 7 miles from the hill, I push loaded scrapers and ripped up decomp for 6 months! I remember very little clay LOL
@tassi138273 жыл бұрын
Most people mistake wet silt for clay, big difference.
@dennisholst43226 ай бұрын
That decomposed granite can get some tires
@stephensmalldridge95042 жыл бұрын
You don't really get the size of these 657s until you see how tiny that D8 looks pushing it They better get a push plate welded on that blade though before it's beat to hell lol
@gilmarbombeiro3 жыл бұрын
Maquina boa
@bluesman77036 жыл бұрын
Tell me if I'm wrong , those 657's will hold 50 cubic yards a crack ! Awesome !
@rogerjohnson62185 жыл бұрын
NO..you are not
@rickj19832 жыл бұрын
73 actually. If I hadn’t Googled I wouldn’t have believed it.
@johnmclaurinmclaurin9243 жыл бұрын
Man you need at least a D10 to adequately push that monster
@MrSpad0076 жыл бұрын
44 yards nice.
@reatonable5 жыл бұрын
Never operated a 657 but operated a 627 and a 651 and a 621 so I suppose the jump is about the same from a single to a twin only bigger, when the dozer was busy ripping I used to push load the singles with the 627, first time I started doing it every one said you can't do that but the boss agreed with me and I kept up with the singles.
@australianoutback3 жыл бұрын
Of course the boss agreed... He didn't pay for the fuel or maintenance
@lesflynn44553 жыл бұрын
Why not? Sounds smart too me.
@bigmario7682 жыл бұрын
I agree, only reason the bulldozer needs to be there is rip, push to grade and or push out a stuck scraper, if it's got 2 engines and a good operator it will keep up if not ahead of singles been push loaded.
@andrewc01282 жыл бұрын
Is it a bad idea to drop the rippers while pushing the scraper?
@dennisholst43226 ай бұрын
If you don't like the scraper hand
@Silverio5623 жыл бұрын
Is that in Montebello ca
@adolfadolfvich32536 жыл бұрын
🎥👍👋👋👋
@chrishofer30623 жыл бұрын
Who do you think would win in a pull The dozer or the scraper
@terrancefields44144 жыл бұрын
This brings back so many happy memories of growing up in the fifties.
@davesleep82025 жыл бұрын
You lads all seem to use the "Pusher" D? for loading and not what we were always to do which was for topping up. back in the day 60s&70s we had to be half loaded before the "Pusher" started to push us, if you were not self half loaded you ended up taking the long walk back to you're car. We only had 631s and a D9. By using the Half Loaded method production was up by 40% as against the waiting for the "Pusher" to load us. Happy Days.
@alangriff15 жыл бұрын
I would have thought so too...esp with twin engined scrapers. Noticed only 2 ripers on the D8...is 3 too much for it to handle in hard clay?
@rbeck8204 жыл бұрын
True, and this one hasn't been fully loaded the entire video. Using 3 engines for the full push is a waste of time and money.
@kevinjasper66204 жыл бұрын
I ran a 621 , the pusher was a D8, poor guy had to try to catch us.
@neilphillips78954 жыл бұрын
You are right on ,from N.C.
@lesflynn44553 жыл бұрын
The site I'm on, I regularly see 3 621s idling away, waiting for the push. The foreman doesn't say anything. Mind you the material is rough. Lots of rock in it. They had the D9 down for 2 days converting it to a single ripper because there's so much rock in the ground.
@lyndgemberling3176 жыл бұрын
A slope machine as a pusher?
@cleokey Жыл бұрын
Wonder where/when with Cal mentioned in title?
@marktruax55295 жыл бұрын
wheres the load ,omg,that back motor isnt a counter weight,loader up dude,
@brianmcdonald95025 жыл бұрын
Exactly, pretty rammy cat skinner also!
@user-ms5tz3fq2n3 жыл бұрын
모터 그레이더: - 자체 동력으로 움직이는 그레이더로 2개의 바퀴 축 사이에 회전날이 달려있어 땅을 평평하게 할 때 사용되는 기계이다. - 정지작업, 자갈길의 유지보수, 땅고르기, 도로 건설 시 측구 굴착, 초기 제설, 도로정리 등에 적합하다.
@hectorroman78314 жыл бұрын
Saludo operadorea cat me llamo Hector Roman mencanta sus video cuato Daria por guial uno de sus Equipo Dtg a cada uno de ustedea
@seluos6 жыл бұрын
Lol, I weld the rear supports for these in dept 6515 in good old Decatur, Illinois.
@mackowen93376 жыл бұрын
Richard Weemer Was it fun?
@johnpogue33945 жыл бұрын
Ran a D9G with ripper at Clinton power plant in Jan 1976. Pushed some 637's I believe. Shelbyville.
@cl75104 жыл бұрын
I was just at the Decatur plant a few weeks ago on a tour. Very impressive operation there. I was surprised at the many different machines they build there. Mining trucks, large wheel loaders, scrapers, the 24 grader, totally awesome! If you ever get the chance to go, take it! Well worth the time and travel. *edit- they also build compactors there, and I think wheeled dozers. They have the first ever 785 haul truck parked out front of one building and what looked like a first generation 657 scraper in front of another. Truly amazing how far their machines have come after watching this 57 work. The one in Decatur didn’t even have a ROPS.
@MustObeyTheRules2 жыл бұрын
I bet your welds suck
@Bigmike3406E Жыл бұрын
There are a couple companies here in California that run scrapers way bigger than 57s and they are Cat 660 s and Cat 666s or we call them triple sixes . 60 yard three axle scrapers and the triple sixes are twin engine.
@jordank94310 ай бұрын
657s have a 70 yard bowl
@Bigmike3406E10 ай бұрын
@@jordank943 I ran them for 20 years , The company's largest open-bowled scraper, the Cat 657 has a heaped capacity of 44 cubic yards with a rated load of 52 tons.the 666 and 660 scrapers had a huge bowl and was rated at 40 cubic yards struck and 54 cubic yards heaped (even more with sideboards).I worked for a company called McCoy construction and they tried to stretch the 57Bs and side board them but the extra weight kept breaking the goose necks and cushion hitches . 😎
@Bigmike3406E10 ай бұрын
@@jordank943 Some of the 657 E models I ran had side boards and apron extensions but never held even close to 70 yards and they were prone for cracking the hitches and goosenecks with all the extra weight.
@remylisi631E Жыл бұрын
Belle pousse bravo en symbiose...
@Lehtosenkanava5 жыл бұрын
Why arent this Scrapers equipped with more power say double the power? Or is the tires limited traction the problem? I see them pushed and pulled and wonder if they are underpowered
@geraldlrstubbs5 жыл бұрын
There is a limit as to how much traction you can get onto the ground. They are not underpowered. We seldom used the back engine when being pushed but let the pusher do most of the work, using only the front engine. When you are loading the weight comes off the back wheels and there is no point spinning them because that does nothing except rip up tyres. Yes they will self load fine, but the bite is a lot less and the travel much longer in the cut - it is far less productive. If you have a couple of pushers they load in seconds and there is little tyre wear. To help you understand lack of traction on the back, the box does not go down by gravity, like a rope scraper, but is powered down. You can power the box down and leave the back wheels six foot in the air.
@davidrhodes76553 ай бұрын
Love the batter blade on the dozer no need for a grader aye
@murphy87ww4 жыл бұрын
Dam he rights around with his can up pretty high.
@misiclover16583 жыл бұрын
657G....600 HP front, 478 HP rear engine. Cost of machine about $800,000.
@rodneytell52663 жыл бұрын
Guessing the cost is well over $1,000,000 usd
@laffilmfest37592 жыл бұрын
That baby can move some earth now!!!
@kfstreich47875 жыл бұрын
We're just here to make your d8 look tiny
@diggerdave.65872 жыл бұрын
It would have been nice to see the whole operation
@everylmansfield63823 жыл бұрын
Along with the D8,the scraper has 2 engine powering the loading.
@annisaferdeaniwidyastika11263 жыл бұрын
You So Good
@fanofClips5 жыл бұрын
Sorry for the remark but, i think that the scraper not make good work without the dozer.
@brandonwagner47193 жыл бұрын
COOL
@jlhighfield91166 жыл бұрын
D8 looks tiny behind that monster
@walterernestooliveirawalti89472 жыл бұрын
O Brasil não tem mais empresa que tem estes maquinário só camarço correria mas não tem obras para estes maquinário rodar tenho saudades sou Op de escreper ll
@michaeltule4549 Жыл бұрын
Oh what organizations use your tractors
@isaacaaron79835 жыл бұрын
Why is such a small pushCAT being used?
@Itz_vivi-t7b4 жыл бұрын
Coool
@rogersroadrage82293 жыл бұрын
Tbh i was a little surprised it was just a d8 pushing. For such a large scraper
@Backpacker1uk4 жыл бұрын
Used to operate a Terex TS40 we carried 40+ tons of coal regular
@kevinjasper66204 жыл бұрын
Backpacker1uk I ran a TS14. Yes, I know... It was kinda small.
@Backpacker1uk4 жыл бұрын
@@kevinjasper6620 TS 14 single engine up front was it not
@kevinjasper66204 жыл бұрын
Backpacker1uk nope, double barrel
@tassi138273 жыл бұрын
@@kevinjasper6620 The T in TS stands for TWIN.
@gary192222 жыл бұрын
Is this in menifee?
@liverawkstar4 жыл бұрын
Not the biggest in history. Maybe currently. 660 and 666 bigger
@soldierofdirt816 жыл бұрын
The D8 is dwarfed by the 657. use what you got! love how the D8 is using proper shank pitch when ripping!
@makaylatriano2206 жыл бұрын
Geo Thomas when your chasing grade behind scrapers and spot ripping for them three is too many. You can rip faster and a lot of time the rip marks are more to show where the cut is than to loosen once your closer to grade.
@johnkaiser3534 жыл бұрын
More like bulldozer work with the occasional appearance of the Scraper.
@stephensmalldridge95042 жыл бұрын
A good push dozer always works the dirt waiting on scrapers That's its job
@dshogan61742 ай бұрын
So this is larger than a terex S24?
@Pedropatroleiro6863 жыл бұрын
Que saudades do tempo que eu era caxoteiro.acha eu no yotube sou Pedro patroleiro. Curte minhas musicas. Valeu deus abençoe todos
@garyd72175 жыл бұрын
FILL the tub ROOKIE
@charlesgreen11962 жыл бұрын
Should push with 2 D10's load it in 12 seconds. 8T is a great dozer but small to push 57's
@likeaboss8602 жыл бұрын
These guys are very productive with there machines no fucking around these are real Operating Engineers
@dennisholst43226 ай бұрын
That's Style
@jpk24204 жыл бұрын
You're sleeping on this one.looks good to someone who is clueless to the trade.
@rbeck8204 жыл бұрын
Push Pull would have been more cost effective here. And, let the little D8 rip away. Also the operators should be required to fill that bowl or go home.....TOO much wasted time.
@jefferykeeper81126 жыл бұрын
I seen seven of them push one out of mud and three dosers helping
@tassi138273 жыл бұрын
Took so much effort because they didn't know how to do it.
@ret8744 Жыл бұрын
i had sum older guy that was runnin on an 8 on a 9’s job, dude was gettin so mad i wasnt putting my can down at the right time. i bout knocked gramps out 😂.
@dennisholst43226 ай бұрын
He is trying to break you in the right way
@juniorv44833 жыл бұрын
That D8T should be ripping and then the scraper would be able to cut easier and faster
@michaeltule4549 Жыл бұрын
I'm on the operating bus now John doe
@jaredbrown32493 жыл бұрын
So why was the bulldozer pushing the scraper?
@Retired88M Жыл бұрын
Surprised there isn’t the reenforcing steel plate on the center of the blade for pushing
@annisaferdeaniwidyastika11263 жыл бұрын
Wow
@hughnelson5737 Жыл бұрын
Any one out there know how much the cat 660 could haul 49er 47 yes
@briangardiner10156 жыл бұрын
Awesome Earthmovers could you tell us the reason they were pushing with a D8T instead of something larger?
@AwesomeEarthmovers6 жыл бұрын
Brian Gardiner I don’t know but I could take a guess at it. They do have a couple of D10T’s on site so it’s not for the lack of a big dozer. I’m guessing the reason is that the job is nearly done and they only have the one scraper in the video working. There’s no point having a big dozer hanging around for one scraper.
@deflaytedwayz15 жыл бұрын
That 8 seems to be doing just fine. Why use anything bigger?
@xiaomi3135 Жыл бұрын
657G Power Best
@duffland09 Жыл бұрын
I work all day every day with a fleet of them.. it's 10.30pm on a Thursday.. and here I am... 🙄.. there's no cure. 😋
@dennisholst43226 ай бұрын
Who you working for
@rodneytell52663 жыл бұрын
He needs a pushpull partner , so the D8 can go do some trimming