CB09 Blade Setup - What is it, and how do I set it up? Silhouette Cameo Blade

Рет қаралды 29,644

Күн бұрын

Setting up your CB09 blade to use in your Silhouette Cameo shouldnt be challenging - Try this method to easily set up your blade and use this template below:
kellyrossouw.ck.page/cb09freebie
If you would like to buy me a coffee to help support the channel, you can do so here: www.buymeacoffee.com/KellyRos...
Thank you SO much in advance - I cannot express how much I appreciate your support!
Looking for some fun tools for your Cameo? Check out my Affiliate lists:
amzn.to/3c49ANu
*Please note that I may earn a small commission from products bought through Affiliate programs, this in no way affects the price you pay.
I try post as much content as I can on Social Media, so please follow me there!:
/ kelly.rossouw
/ kellyrossouwza
Channel by Kelly Rossouw

Пікірлер: 171

@Jaywalkingtours 13 күн бұрын

I really appreciate this video because it is very clear, simple, and easy to follow.

@nfamouzcookie 2 жыл бұрын

Used one in my Cameo 2 and it ran fine for the last 7 yrs. It still works today I just upgraded

@KellyRossouw 2 жыл бұрын

Amazing! They are such nice blades

@noggs4vlogs Жыл бұрын

Absolutely brilliant tutorial. So clear and precise. Just dragged my Silhouette Portrait out the cuboard after 8 years. Its the first model, and I've got several of these blades in my box. Did not know how to load these, but your tutorial is fantastic. Thanks very much. Also the Portrait worked straight away on Windows 11 Pro with the official download from their website. March 9th 2023

@Ineedabreakfromlife Жыл бұрын

I just bought a used Silhouette and was about to order some back-up blades, sooo glad I stumbled across this video and the CB09!

@jeffwilliams5096 3 ай бұрын

Thank you for the video instructions, and especially sending me the CBO9 blade guide to place on my blade, watched your video and followed all of your steps, Thank You very much great video.

@corneliawolfaard7353 3 жыл бұрын

My favorite is the 1st one i have ever seen from you. It was the one with the alcohol inks on vynal. I had so many questions, and the awesome person you are you helped and shared your knowledge with me. Thank you for always be willing to share you knowledge with us. It is something that does not happen alot.

@KellyRossouw 3 жыл бұрын

Ah thank you so much! You are so welcome :) Im more than happy to share my information! I will always share what I know to help as many people as I can 😍

@dominiquelangner1491 3 жыл бұрын

Mu favorite one, was the seamless design ... incredible, i couldn’t believe how easy you design seamless background! The most anticipate was the CB09 as i’ve heard so much about it ... love the idea of 3 different holder for each application!

@KellyRossouw 3 жыл бұрын

Aaah yes easily one of my favourites as well! Thank you for sharing 😍

@madmommy Жыл бұрын

Just bought these for my Cameo 3. This video is nothing short of brilliant! I’m going to buy 2 more carriers right away so I can trade out easily. Such an informative video, I can’t thank you enough!

@KellyRossouw Жыл бұрын

You are so welcome! :)

@PollyannaHeart 3 жыл бұрын

Thank you for the files and the comprehensive set up guide. I've had a CB09 probably for over a year and it has sat on the shelf waiting for me to figure out how to use it.

@KellyRossouw 3 жыл бұрын

Glad it helped! Im not going to lie, I was the same! But it really is SO easy!

@cathiotirobaf1680 5 ай бұрын

I did this and I love it... thank you so much for sharing....

@rachelsantos5396 2 жыл бұрын

Thank you so much! This is one of the best videos on KZfaq for the CB09!

@KellyRossouw 2 жыл бұрын

You are so welcome! Im glad you enjoyed it :D

@cecilevangreunen5078 3 жыл бұрын

I have a few favourite videos. One is the Low Cost Christmas Gift Ideas. I mostly use my cameo for gifts at this stage of my life. The Tracing in Silhouette Studio and the Print and Cut. Nice ideas for gift packaging and paper roses - giant ones as well for table decor - will be nice to see.

@KellyRossouw 3 жыл бұрын

😭 This is so sweet! Thank you so much! Giant paper roses are totally something id love to do!

@lanmonic1698 3 жыл бұрын

Me too would love to try the CB09 blade... 🤗

@shinga4117 3 жыл бұрын

LOVED the Foil Quill video as wrll as Pricing videos 😍😍😍 Woul LUV to see a sublimation video on the teflon method as well as Rhinestones!

@KellyRossouw 3 жыл бұрын

Ah I loved those too! Thanks for the ideas - Im not sure I have heard of the teflon method (or at least not with that name!)- can you share the crib notes please? :)

@jessicapiper8367 3 жыл бұрын

My favourite video was definitely the Print & Cut - Troubleshooting? It is the MOST helpful video on KZfaq. I would love to see a video on layering vinyl

@KellyRossouw 3 жыл бұрын

ncaww thank you! I loved that one too :D Layering vinyl is a great idea - there are a few options out there I can put together to compare :) Thanks!

@deandraford 2 жыл бұрын

Oh my god you are an angel! thank you for this and the tutorial to set it up!!

@KellyRossouw 2 жыл бұрын

You are so welcome!

@gwenithross1308 3 жыл бұрын

Kelly so many tutorials are my favourite! I have learnt so much. I must say the Silhoette Studio Tutorials for Beginners helped me so much and Price Your Crafts: How do I work out prices ... Both got me started with my little business. Thank you for being so generous with your time. You have taught me so much. I always look forward to seeing your nails too.

@KellyRossouw 3 жыл бұрын

haha thank you so much! You are most welcome! Any videos you would like to see in the future? :)

@gwenithross1308 3 жыл бұрын

@@KellyRossouwI would love to see what the best way is to do vinyl adhesive on balloons. Thanks so much.

@colleenhill2495 8 ай бұрын

Thank you so much. You made a fantastic video. ❤

@hdb80 2 жыл бұрын

So incredibly helpful. Thank you!

@KellyRossouw 2 жыл бұрын

Glad it was helpful! You are so welcome

@czarinacielosantos9630 2 жыл бұрын

Thankk you!!! this video was just what i needed!!! 😊❤️

@KellyRossouw 2 жыл бұрын

Glad it was helpful!

@euvid1 2 жыл бұрын

Thanks so much for the wonderful advice.

@KellyRossouw 2 жыл бұрын

You are so welcome!

@marierademan8836 3 жыл бұрын

I loved this CBO9 blade video and I would like to see a video for the round key chains or bookmarks and how to use the epoxy on it.

@KellyRossouw 3 жыл бұрын

Thank you - and great idea!!

@vyjentheenaik-tseng8169 3 жыл бұрын

I loved the Print & Cut Vide0

@KellyRossouw 3 жыл бұрын

Thank you! Anything you would like to see in the future?

@juliewhitehead4432 2 жыл бұрын

Thankyou so much for this it was really helpful.

@KellyRossouw 2 жыл бұрын

Glad it was helpful!

@kathrynpitot8730 3 жыл бұрын

I loved CBO9 blade video and I would like to see videos on adding glyphs (the swirls etc) onto fonts to create fancy phrases, and where you find the glyphs for your fonts on your computer.

@KellyRossouw 3 жыл бұрын

Thanks for sharing! Have you checked out the Knockout design video? I do go over adding glyphs to that video a bit :)

@roguerrerocr Жыл бұрын

It's great and put my old cameo agains in the battle. Thanks

@KellyRossouw Жыл бұрын

Glad you like it!

@chrisarchuleta8878 2 жыл бұрын

I cannot thank you enough...... so helpful.

@KellyRossouw 2 жыл бұрын

You are so welcome!

@lanmonic1698 3 жыл бұрын

Beslis die "CB09 blade" video, dink dit is nog een van die beste beskrywings van hierdie "CB09 blade* baie dankie, dit help regtig baie🤗😊

@KellyRossouw 3 жыл бұрын

Ag fantasties! Dis baie oulik van jou om so te se 😍 Watte videos wil jy in die toekoms sien?

@cayotegirlsa 3 жыл бұрын

I liked the knockout effect video and print and cut tutorials. I want to learn everything about the cameo. Maybe a hack video.

@KellyRossouw 3 жыл бұрын

ah im glad you enjoyed those too! a hack video would be cool - Ill look into it :)

@joanneandrews1557 3 жыл бұрын

The video I liked the best so far is the spiral betty video. I would love to see a video on how to layer vinyl. Great videos!

@KellyRossouw 3 жыл бұрын

Thats a great one for sure!! Its definitely in the works! Thank you so much

@KellyRossouw 3 жыл бұрын

Congratulations! You are the winner! 🥳 please email me your address by 3 June and I will send you your prize!

@louisesteyn8064 2 жыл бұрын

Brilliant! Thank you!!

@KellyRossouw 2 жыл бұрын

You're very welcome!

@craftyco.5101 3 жыл бұрын

My favorite video was the Alcohol inks on white adhesive vinyl. Such a great idea. I really want to try it once i buy ink. i would love a faux leather cutting video, i want to make earrings and sell them ,i would love love a video to give me tips on working with the faux leathe

@KellyRossouw 3 жыл бұрын

Easily one of my favourites too! I do have some faux leather - so its definitely a possibility for me to easily be able to do :) Thank you!

@louwklopper3705 3 жыл бұрын

I liked the print and cut video.. I would like to see another video on leather cutting

@KellyRossouw 3 жыл бұрын

Loved that one too! And I love working with leather so thats totally possible! :D

@louwklopper3705 3 жыл бұрын

@@KellyRossouw i'm having issues with my silhouette. Whilst cutting vinyl stickers the bottom half of my page is not cutting correctly. What can I look at? I bought a new cutting mat yesterday to see if they s will help... but to no avail.. pls help if you have any suggestions...

@dna7291 Ай бұрын

Gracias fue de mucha ayuda!

@jonmanta8271 2 ай бұрын

it was nice to show how you install this in cartridge number 2

@lilyssimplecreations6634 Жыл бұрын

Great video ❤️

@KellyRossouw Жыл бұрын

Thank you!!

@petercolleentissink5880 3 жыл бұрын

My favourite was vinyl on a balloon. I would love to see a tutorial on using the stippling feature and printing a picture using a pen.

@KellyRossouw 3 жыл бұрын

I absolutely loved making that video! Stippling and printing with a pen are both awesome ideas! Thank you 😍

@marietjieviljoen9797 3 жыл бұрын

Oh, I absolutely loved the video you did on the holographic sticker sheets and of course the one on the CB09 blade. Oh! And the knock out feature! Ag, really all of them. Would like a video on what does compound path and release compound path etc really mean 😂 I just click them all till I get the editing points... Terrible, I know 🙈

@KellyRossouw 3 жыл бұрын

Thank you! glad you like that one too, (and all of them hehe!) Compound path definitely is confusing! Will see what I can do ;)

@marietjieviljoen9797 3 жыл бұрын

Thank you, dearest Kelly 🤗

@ta5fa 2 жыл бұрын

wonderfull learn thank you so much

@KellyRossouw 2 жыл бұрын

You are welcome!

@nalanihamby3710 2 жыл бұрын

Wow that was genus

@KellyRossouw 2 жыл бұрын

Thank you very much!

@callisto9 2 жыл бұрын

Thank you so much for this video! It's helped out immensely! One question - you say the 60* blade is for thin materials, but everything I read says the 60* blade is for thicker materials, and reference it as a deep cut blade. Can you clarify?

@KellyRossouw 2 жыл бұрын

yay! Im glad :) It depends on where the blade is measured from, if the actual blade itself is 60 deg, then it is a much thicker blade, and it can cut thicker things. If the degrees of the blade is measured from the ground to the blade as 60 degrees then the blade itself is thinner and can cut the thinner/finer materials - I noticed this inconsistency after releasing this video unfortunately - sorry for the confusion!

@Feirypackman 7 ай бұрын

Hi. I've watched your vid several times thank you for your time. I've subscribed to the link below as it says to get the depth gauge but all it sent me was a price list, could you please send me the link for the depth gauge. Kind rgds.

@KellyRossouw 7 ай бұрын

Thanks so much for letting me know! The link is working correctly now as intended x

@iesomir Жыл бұрын

Beautiful voice !

@IxiaRayne 2 жыл бұрын

Okay this looks fairly easy. I might try this as well. What do you reckon - how much longer does the cb09 blade last than the original silhouette?

@KellyRossouw 2 жыл бұрын

Good idea! I have heard it not only cuts better, but also lasts longer, and is cheaper to replace - win/win!

@Paddlepop014 2 ай бұрын

I know I'm late to this video but thankyou! Do you have a link for this one that you showed?

@KellyRossouw 2 ай бұрын

You are welcome! What link are you looking for? The links are in the description :)

@vanessebaumann3625 Жыл бұрын

Brilliant video thanks for sharing, just a question please how do I know if my cbo9 uses the spring or not?

@KellyRossouw Жыл бұрын

You are welcome! The supplier should send you the complete unit, so if it comes without a spring, then you dont need one!

@vanessebaumann3625 Жыл бұрын

Thanks Kelly mine came with tiny weeny springs, I have a cameo 4 plus, the blade fits with the blue adaptor, did a test cut it cuts beautiful on top but not cutting through! Could this be because I didn't use the spring? Or does it not work in the cameo 4 plus?

@nicholeholcombe4227 Жыл бұрын

Can you do a video on tracing. I have the design software. I have issues with getting just the picture

@KellyRossouw Жыл бұрын

I have done a few videos on tracing already! You can check them out here: kzfaq.info/get/bejne/lbeVga15mdi1gok.html kzfaq.info/get/bejne/hZd-qJthud-3YoU.html

@annelinestein3789 7 ай бұрын

Hi Kelly, thank you so much for this helpful video. When I download the file I dont see the print, I only see the price calculator and rate

@KellyRossouw 7 ай бұрын

You are so welcome! Oh no!! Ive changed it several times and it doesnt seem to want to update, but please try again now and let me know if it works for you?

@annelinestein3789 7 ай бұрын

@@KellyRossouw you are amazing I got it now thank you so much

@xxsecretdreamerzxx 2 жыл бұрын

You have one for just vinyl, but there are so many different kinds of vinyl. Do you just adjust the force or do you use the ruler and adjust the blade?

@KellyRossouw 2 жыл бұрын

I would treat it like the premium blade - adjust the depth for the different kinds of vinyl :)

@tonycarrington6994 Жыл бұрын

hi kelly...great video, have just purchased a couple of CB09 blades after watching your video, i wish to download the Depth Indicator, when i click the link it gives me 2 options, which one should i download? thank you tony ;-)

@KellyRossouw Жыл бұрын

Hi Tony, Thank you! Either of those will work. The .studio3 file is for those that cant open an SVG

@tonycarrington4426 Жыл бұрын

@@KellyRossouw perfect, thanks Kelly 😎👍

@Flutter3ye 3 жыл бұрын

I loved this CB 09 blade video the best, would love a crisp / candy wrapper video ;)

@KellyRossouw 3 жыл бұрын

Ah awesome! Thank you! Yesss thats definitely on the list :)

@ahareoutofsquare2757 Жыл бұрын

I have a crazy question that I am hoping you could answer. Will these blades cut flat acrylic sheets, like shriky dinks? Any advise would be grateful.

@KellyRossouw Жыл бұрын

Depends on the thickness of the acrylic. Very thin sheets - yes it should (I havent tried, so I can only speculate). But with a material that hard you will blunt your blade very quickly - they are not designed for this kind of work. Shrinky dinks should be quite easy to cut as it isnt as hard as acrylic - I have seen many people easily cut those

@almasaudade 2 жыл бұрын

hi there, just got one of these for the first time, and im having the odd problem that i dont really see posted anywhere else, which is that the "bum" of my needle isnt fitting into the housing!?? has that ever happened to you?? thanks!

@KellyRossouw 2 жыл бұрын

I have had that before yes! It was because I accidentally bought the Cricut blades for the silhouette CB09 blade holder, once i switched them out I didnt have a problem :)

@katherinep4184 7 ай бұрын

Hi Kelly, Was after the handy little sticker that goes around the CB09 blade holder, Signed up on your link but got a costings sheet instead?? any chance you could make the label available? Thanks Katherine

@KellyRossouw 7 ай бұрын

Hi there! Thanks so much for letting me know, I thought I updated it a few weeks ago but it didnt save. It should be right now - please let me know if its still not working?

@katherinep4184 7 ай бұрын

@@KellyRossouw - thanks for your reply. Still sending me the price calculations sheet.

@heathery09 2 жыл бұрын

Can you tell me which CB09 blade you purchased? I have one and it won't fit into my Cameo 4 adapter. The little ridge that comes out is too wide. I appreciate any help. :-)

@KellyRossouw 2 жыл бұрын

Hi Heather! I got mine from Snippy Sisters, maybe you could try filing it down a little bit perhaps? Not sure what impact it will have though, as I havent tested it myself - so proceed with caution!

@christeenleeful 3 жыл бұрын

I just ordered a CB09

@KellyRossouw 3 жыл бұрын

ooooh enjoy it! :D

@kathrynpitot8730 2 жыл бұрын

Thank you for this video. I also had my cb09 blade for years before trying it. I have just changed my blade and wanted to mention that when inserting the blade there is a circle hole in the silver holder and I found my blade needed to be pushed slightly into that hole till it stood straight by itself. Then screw on the black cap thing. At first I didn't to that and I couldn't get my cut settings to work but after re inserting the blade into that hole thing it cuts perfectly. Hope this helps someone else.

@KellyRossouw 2 жыл бұрын

You are most welcome! Glad you mentioned that yes! As mentioned in the video, there are two (or more?) different types of CB09, and I think that is the other type that I dont have :)

@mikeledee8786 3 жыл бұрын

I used the CBO9 also and very happy with the exception of buying replacement blades, I have tried different types for CBO9 replacements but can't find any that work as good as the ones that came with the kit, any suggestions?

@KellyRossouw 3 жыл бұрын

hmm I unfortunately cannot comment here, I got 30 blades with my CB09, so I havent yet had to replace them 🙈 I bought it from Amazon though!

@mikeledee8786 3 жыл бұрын

@@KellyRossouw Can you give me the link which blade kit you bought? Thanks.

@KellyRossouw 3 жыл бұрын

These are the ones I have: amzn.to/3wytpEK You can also buy them separately from the blade here: amzn.to/3htwPEE (different brand though - but excellent reviews)

@BalloonSchool Жыл бұрын

My CB09 Blade weight 11,60gr. /// Did you noticed that there are "different CB09 blade holders available" and not all blades fit in all holders :/ … I guess many won’t notice this as the blades (in my case only vinyl) cuts basically forever. I have here now 3 from 6 blade holders (all were sold as CB09 Graphtec) and they won’t let insert the blades I have from a bundle.

@lynnheald3294 2 жыл бұрын

How do you know if you need the spring ? What color blade is good for cardstock ?

@KellyRossouw 2 жыл бұрын

If your blade came with the spring, then you will need to use it, the blade that uses the spring inserts from the bottom (the main part of the CB09), and if im not mistaken, the one that doesnt use the blade loads from the tip (dont have one to confirm unfortunately)

@Eikonic_ 5 ай бұрын

not sure if its the model i purchased, by my blades will NOT seat into the holder at all. iv watched a few videos and everyone seems to just slide them in. i tried by hand, and then holding the blade with pliers so i didnt stab myself, and it will not seat. i just had to put the spring on, let it lean against the edge, and then get it "straight" by putting the cap on and guiding it thru the hole in the cap. not sure if im missing something here? also, i tried getting the template you offered. filled in my email 2 or 3 times, and no link was ever sent. so, you may want to look into that.

@KellyRossouw 5 ай бұрын

I would check with the supplier as things might have changed since making this video. Thanks for letting me know re: template - it has been fixed!

@jandexteradonis580 2 жыл бұрын

Hi, by using this cb09 blade with adapter the adjustment 0-10 on the "send" tab is not useful right?

@KellyRossouw 2 жыл бұрын

Apparently so, I didnt trust what I heard so I changed it anyway haha :P

@anselenerichter7297 2 ай бұрын

Hi thank you Can you please advise where I can purchase a CB 09 blade and housing I am also in RSA

@KellyRossouw 2 ай бұрын

You are most welcome! You can get them from Snippy Sisters: snippy-sisters.co.za/product/cb09-blade-holder-15-blades-5-each-of-30-45-60-degrees/

@smithfam5328 2 жыл бұрын

What do you recommend for cardstock? I am using the middle size, I keep increasing the depth and I feel like it’s getting worse each time.

@KellyRossouw 2 жыл бұрын

I would suggest leaving the depth as is, if it isnt cutting through try a higher force/more passes. If that isnt working then your blade might be too blunt and I would suggest a new one 💙

@smithfam5328 2 жыл бұрын

@@KellyRossouw yes you were right on that…it was a force issue. And I saw that since I was increasing the depth, it vibrated so hard the whole cap of the casing came loose. Working well now 😁 4 passes

@vanessebaumann3625 Жыл бұрын

Kelly the cameo 4 plus does not give me option for ratchet blade under cut settings, what would I choose then to use the CBO9 blade please?

@KellyRossouw Жыл бұрын

Hi Vanesse. you need to use the 1mm blade option

@vanessebaumann3625 Жыл бұрын

@@KellyRossouw thank you kindly let me try again lol and I must use the teeny weeny spring as it came with it? Correct? No?

@debbiemeyer8809 Жыл бұрын

Have u looked at the zoom tool?.engraving for cameo 4? Help.asb tog!

@KellyRossouw Жыл бұрын

Unfortunately not.

@vanessarichardson6588 3 жыл бұрын

Where can I get the template for the blade? The link that is in the description does not work. Thanks!

@KellyRossouw 3 жыл бұрын

Thanks Vanessa! My hosing changed today - busy updating all the links, so I have now updated the link :)

@vanessarichardson6588 3 жыл бұрын

@@KellyRossouw Thank you so much!

@stickersaccount6614 Жыл бұрын

why does mine doesnt cut very well? it folds the edges, do i need to position the blade angle?

@KellyRossouw Жыл бұрын

Are you using the 45 degree blade? sounds like you might be using a thicker blade for a thicker material

@lanmonic1698 3 жыл бұрын

😉Baie dankie🤗

@arieagung 11 ай бұрын

I cut kiss cut with this blade without problem, but when I want die cut, it won't go through, no matter the force setting I use. I even tried to screw it out longer up to 1 mm with maximum force (33 on Cameo 4) and it still did not cut through... I tried using auto blade and it cut through even when I use blade setting 5 and force 15.

@KellyRossouw 11 ай бұрын

That is very strange, I would try a different software version, as it may be a software issue!

@nawabrahim2312 2 жыл бұрын

Mam this holder graphtec cutting plotter ce6000-60 model suitable?

@KellyRossouw 2 жыл бұрын

I cannot say unfortunately, as I am not familiar with that model of machine or blade :(

@impossiblenotdifficult9559 7 ай бұрын

How do I know if I need the spring or not? x

@KellyRossouw 7 ай бұрын

It will come with the spring if you need it :)

@aletheahickman3702 3 жыл бұрын

where can i get the template for the depth indicator. ?

@KellyRossouw 3 жыл бұрын

Hi Alethea! The link is in the description of the video :)

@beertuwalmyuziek9517 Жыл бұрын

hello im using cb09 blade. but it keeps scratching my stickers. any tips how to fix it?

@KellyRossouw Жыл бұрын

You may have a blade that is too big, try lifting the blade a bit in the mahcine housing

@mladenzivkovic5970 Жыл бұрын

Hello! does anyone know does this blade fit Graphtec CE-lite 50?

@KellyRossouw Жыл бұрын

I hope someone else can answer, as I am not sure myself unfortunately.

@Berechit1970 5 ай бұрын

i checked that link but just asked for my email,I put it on my email but don't send me anything, I still waiting but nothing for the template.

@KellyRossouw 5 ай бұрын

Please check your spam box!

@lanmonic1698 3 жыл бұрын

Sal baie graag wil weet hoe mens 'n design na jou sny opsie stuur en net die buitelyne kan sny sonder dat dit die binneste buitelyne ook saam sny, ek dink dit het te doen met die compound path maar ek kry nog nie die koutjie by die oor nie. Ek delete gewoonlik die binne deel en sny net die buitelyne. 🙈

@KellyRossouw 3 жыл бұрын

Her jy al probeer in die send panel net "cut edge"?

@lanmonic1698 3 жыл бұрын

@@KellyRossouw hi, ek het en gesny per kleur al. Sal maar speel met dit tot ek dit regkry😊dankie vir al jou awesome videos🤗

@lanmonic1698 3 жыл бұрын

@@KellyRossouw Hi, wie was toe die gelukkige wenner van die CB09 blade gewees?

@KellyRossouw 3 жыл бұрын

@@lanmonic1698 the draw will only be on 1 June :)

@veguecolep 7 ай бұрын

i susbscribed but i cant find the printing file.. help please

@KellyRossouw 7 ай бұрын

The link is right in the beginning of the description of the video :)

@suzannegreen5301 6 ай бұрын

Hi Kelly, I’m not getting the email from you for the cb09 blade numbers. HELP, please! Thx

@KellyRossouw 6 ай бұрын

Please check your spam folder!

@suzannegreen5301 6 ай бұрын

@@KellyRossouw, sorry to be a bother, but your email doesn’t show up in my primary, promotion, social, or spam folders. Is there another way I can get the cb09 markings?

@MsTJPink 6 ай бұрын

This is a great video for a beginner, but I don't bother with adjusting the blade depth, I have 3, one holds the 35 degree blade, one holds the 45 degree blade and the other holds the 60 degree blade (never used the 60!) I adjust my cutting using the software, I use the 35 for 350gsm card, and the 45 for vinyl. Not had any problems. Ive actually used the 35 blade to cut vinyl because it was loaded into my cameo and I couldn't be bothered to change it lol I just increased the force, it worked great, I cut a tiny fairy, 2cm high - ish..the detail was astounding. My advice would be ..don't over engineer it, set your blade depth to 1 or 2mm...and use the software to dictate how it cuts. Make it easy on yourself crafters!

@KellyRossouw 5 ай бұрын

I also used three different ones! The only thing the software cant control is the blade depth though, so you may find your blade cutting too deep if it is out too much