Silhouette CAMEO 4 Autoblade Isn't Cutting Deep Enough? Here's the Fix

Рет қаралды 142,205

Silhouette School with Melissa Viscount

3 жыл бұрын

How to Fix Silhouette CAMEO 4 Autoblade Not Cutting | Silhouette School Blog 😍 If your CAMEO 4 Autoblade is cutting too deep or not cutting deep enough, these are 4 things to check to fix it! 👇 SUPPLIES and MORE INFO and IMPORTANT LINKS!👇
You can find a series of FREE WRITTEN tutorial for how to fix Silhouette CAMEO 4 Autoblade problems (and alternatives and replacement to the autoblade) here on Silhouette School Blog 👉
❤️ Silhouette CAMEO 4 Blade Replacement Alternatives:
1mm Manual Blade for CAMEO 4: shrsl.com/2w09r
🤩 Silhouette CAMEO 4 Autoblade Issues: TUTORIALS to Fix It!
How to CLEAN the CAMEO Autoblade 4 👇 www.silhouetteschoolblog.com/...
How to Use the RATCHET BLADE in the CAMEO 4 as an Autoblade Alternative 👇 www.silhouetteschoolblog.com/...
How to MANUALLY ADJUST the CAMEO 4 AutoBlade when Red Line Isn't Moving 👇 www.silhouetteschoolblog.com/...
How to Use the Silhouette CAMEO 4 1mm Premium Blade 👇www.silhouetteschoolblog.com/...
🎥 Looking for more EDITED Silhouette videos from start to finish? 🎥 How about 1:1 Silhouette help? WE HAVE THAT TOO!! 👇
silhouetteu.com/pages/silhoue...
HEAT PRESS TUTORIALS 👇
• Heat Presses (Mug + Ha...

SILHOUETTE PRINT AND CUT 👇
• Silhouette Print and C...
SILHOUETTE SUBLIMATION TUTORIALS 👇
• Sublimation 101: Every...
BE (OR BECOME) A SILHOUETTE BOSS LADY! With my CUTTING A PROFIT Vidoes & BEST SELLING Silhouette eBook 👇
🎥Videos: • Cutting a Profit: Be a...
😘 Cutting a Profit: The Ultimate Silhouette Guide to Running a Successful Business: www.ultimatesilhouetteguide.c...
If you like Quick Craft Videos to get ideas and inspiration, CHECK OUT the 1 Minute Craft Inspiration Videos 👇
• Timelapse Craft Videos...
⏰ SAVE TIME Crafting! Let SO FONTSY do the DESIGNING for YOU ⏰
💰 LIMITED TIME DESIGN & FONT BUNDLES 👉 sofontsy.com/collections/craf...
✂SVGs 👉 sofontsy.com/collections/svgs
👉Download Free SVG Files: sofontsy.com/collections/free
🎥 SUBSCRIBE TO OUR KZfaq CHANNEL! It really helps us bring you more craft tutorials!! 👉 / @silhouetteschool
#silhouetteschool #freesilhouettevideos #freesilhouettetutorials #silhouettecameo4 #cameo4videos #craftvideos #howto #cricut #silhouettecameo #sublimation #heatpress #silhouettebusiness TITLE HERE | Silhouette School Blog 😍 ONE SENTENCE HERE WITH KEYWORDS 👇 SUPPLIES and MORE INFO and IMPORTANT LINKS!👇

Пікірлер: 342

@user-mo1ym9wq4p 8 ай бұрын

Another thing I just learned to be aware of is related to the settings in Silhouette Studio. Others may be aware of this already but it took me forever to clue in. Watching this video got me looking more closely at the depth my blade was set to vs the actual settings in Studio. I realized that while I had my blade depth set to 6 in the "Cut Lines" settings, it was only going to 4 for the real cut while the test cut was going to the appropriate depth of 6. The problem wasn't that it wasn't registering taps though - there were only 4 taps attempted. So the blade was set right according to the number of taps, just not what I had in my Cut Lines settings. What I finally clued into was that I was using the layers to indicate which layer to use to cut and hadn't changed the material listed there. Then down below in the "Cut Lines" section I set my material and used some preset settings. So for the test cut it used the settings in the lower "Cut Lines" section which was 6, but for the main cut it was using the layer settings which was for a totally different kind of material that had a preset blade depth of 4. I made the appropriate adjustment to the material for the layer and now it's all fine. Sorry a bit long winded but I am hoping that this may help someone else!

@mrianmark 2 жыл бұрын

Thanks for doing this video. I have used a Portrait for years and recently bought a Cameo 4. After a few uses the blade stopped working. Got it working again thanks to your tip about making it think it was not an auto blade. You saved my day!

@mgsouthworth 2 жыл бұрын

Yay! You fixed my problem. I'm so happy I could cry! I was nearly ready to scrap my whole project, then I came across your video. Thank you for recommending a force of 14 for HTV. Heaven sent information.

@MarcyCoate 2 жыл бұрын

Yay! This got me back to cutting! Not sure if the blade wasn't pushed all the way down, or if there was some paper stuck inside, but I did all of the steps you showed and it started cutting perfectly again.

@pillred248 3 жыл бұрын

Thank you very much for your straight to the point explanation. You solved my problem. God bless you. Much love form the UK.

@ablack4445 3 жыл бұрын

Thank you so much! I was able to take that small piece off of my blade and found a tiny piece of vinyl. At your recommendation I also changed the force from 10 to 14 and the difference was amazing. Thank you again!

@SilhouetteSchool 3 жыл бұрын

Glad I could help!

@michellestephens2613 2 жыл бұрын

Thank you so much for all the info here Melissa. I’m having trouble cutting with my auto blade in portrait 3 so checked the things you have suggested and going to try again 🙂

@2848Adriana 3 жыл бұрын

Hi Malissa, I have the 1st portrait machine which I love, it is always good to watch these video's, you always learn something new, TFS Cheers Anna.

@carriegooch9410 Жыл бұрын

Thank you! I was replacing my blade after every two sheets of vinyl! Luckily, I had kept them, and realized they had debris in them that was keeping them from resetting. Thank you so much for this video. You’re a life saver!

@SilhouetteSchool Жыл бұрын

Glad I could help!

@tinacaderma6170 2 жыл бұрын

This was litterally one of the most helpful videos ever. Thank you for this info.

@SilhouetteSchool 2 жыл бұрын

Glad it was helpful!

@massimofi 2 жыл бұрын

Thanks. I found a lot of depris inside of the blade just after 2 days of using the machine. Super helpful tip!

@courtneymccurry2013 Жыл бұрын

My machine was etching instead of cutting. When you described how the auto blade presses down automatically to change the dial, i realized my cutting mat was over that tiny hole so it wasn't pressing down, it stayed at 0. THANK YOU!!

@artsolelaces4663 3 жыл бұрын

Thank you so much, I was going nuts because my blade was cutting to deep until I placed it correctly in the blade housing & then adjusted the force & depth.

@SilhouetteSchool 3 жыл бұрын

Glad it helped

@kostjas.2743 Жыл бұрын

Thank you for the info about the reset hard tap! This info was gold. I was confused about how it resets back to zero but now that I know that there is two different kind of taps makes it make sense to me. Thank you.

@boostAWD Жыл бұрын

Yes! Thank you. I selected Manual Blade 2mm since ratchet blade wasn't available in the drop down menu but it worked perfect

@susiespotless 2 ай бұрын

I tried all of these solutions. I took out the blade and reinserted it but it was changing from the reset of 0. I finally restarted my machine and that did the trick. I learned so good tricks from this video. Thanks Melissa.

@RonTraveLife 3 жыл бұрын

OMG, this saves my life, never thought a bunch of clouds of dust is filling out there that prevents on cutting deep enough.

@kathrynlundrigan2221 2 жыл бұрын

Thank you! I didn't even know what that container was that will old my old blades! I still want to get comfortable with my new machine & autoblade but right now I have a project that HAS to get done!

@roxanneloyst3733 10 ай бұрын

Amazing tutorial with exact precise info and directions on the blades . I learn so much from this video. Thank you

@carriereppert395 3 жыл бұрын

I appreciate you so much! I have been a cricut user and I seriously was about to send this Cameo back. It's been nothing but a pain. Thank you!

@SilhouetteSchool 3 жыл бұрын

You are so welcome!

@leticiamona4484 Жыл бұрын

You are a life saver, didnt know i could open the blade to clean it. Did that and now its working perfectly 🎉 Thx!

@SunburntFingers 11 ай бұрын

Thank you so much. I was having trouble cutting through a sticker sheet, with the blade only piercing through the adhesive layer and not making it all the way through the backing. I was so stressed as I am new to the cameo, so I went and bought a 2mm manual blade. Your first solution worked for me, all I had to do was insert the auto blade in correctly and it cut through the sticker sheet entirely. So I can now sell stickers!! Thanks again ❤

@SilhouetteSchool 11 ай бұрын

Wonderful!

@samarxxecho812 2 жыл бұрын

thank you so much,had this auto blade issue with alot of orders,i absolutely snapped,but really thank you so much,i follow and checked every instruction,it works now...done subscribed!!!

@TheCreativeChica Жыл бұрын

Thank You Melissa!👏 I was in the middle of a cut and it just stop cutting the depth I had set it at. I knew you'd have the answer, so I popped over to your channel. Yup! I cleaned the blade and cleaned out those little channels you mention in this video. They were full of glitter from glitter paper! It's all clean and working just fine again! You're Awesome 👌 👏 👍!

@SilhouetteSchool Жыл бұрын

Wonderful!

@Allmyboysball Жыл бұрын

I never thought to clean the part where it taps.... lifesaver

@bangbentro3275 2 жыл бұрын

Apreciate for your tips n tricks to solve autoblade problems. Found my tiny blade looks dirty, just brushed and cleanup and comeback again! Thankss

@SilhouetteSchool 2 жыл бұрын

Great to hear!

@lisaulmar8209 2 жыл бұрын

Thank you thank you thank you!!!! I had no idea why my blade wasn't cutting correctly. I watched your video and BINGO!!!! My blade was filthy.

@joann87 2 жыл бұрын

i did exactly as recommended and it works like a charm! best channel for cameo guide :)

@SilhouetteSchool 2 жыл бұрын

Much appreciated!

@daniellerose8732 2 жыл бұрын

Thank you so much for posting this video. I’m new to using the silhouette machine. I had my blade in wrong. Now it cuts perfectly.

@SilhouetteSchool 2 жыл бұрын

Glad I could help!

@JoAnna-vx8hq 2 жыл бұрын

Thank you so much. My autoblade broke and needed another one ASAP and the extra autoblade I got from amazon wasn't cutting at all either 😠BUT I did have a brand new ratchet blade that I never used on my very first Cameo 1. So I went back into my Cameo 4 supplies and saw that I had the black adaptor (which I had no clue what to do with) you showed in your video and it WORKED PERFECTLY!!! Thank you so much again!! 🤗

@SilhouetteSchool 2 жыл бұрын

Yay! Glad it worked

@barbmac8572 3 жыл бұрын

Thank you Melissa. Very good video.

@Ghostfanofurs Жыл бұрын

Thank you so much for the in depth blade info. 😎👍

@tam8325 3 жыл бұрын

YOU ARE AWESOME!! I would have NEVER seen that crack!

@shawndunlap1077 2 жыл бұрын

Thank you so much for this video. It totally helped me!!!

@mncustom-made-barblafond6825 Жыл бұрын

Great tips. When I took the end off my blade there was a ring of compacted felt from rhinestone flock.

@anitakaal8115 3 жыл бұрын

Thank you. I didn’t know that about the dust

@techjunkie68smusicandtech56 2 жыл бұрын

hi thank you, this is very useful information. Something to bear in mind for when I get my Cameo 4 tomorrow, can't wait to try it out

@SilhouetteSchool 2 жыл бұрын

You'll have so much fun!

@jelatinous Жыл бұрын

Thank you so much! I'm new to this world and this was driving me nuts.

@rebeccaespinosa7574 2 жыл бұрын

thank you so much. I've hit my head against the wall for days trying to figure out why my blade wasn't cutting properly. It was the Lock feature on the machine. It's not super clear what that it and how that works in the instructions. I thought it meant pushing the blade down far enough so that it 'locked' into place. You might suggest to the tech writers that they be clearer about this and that one has to actually push the front of the mechanism towards the blade to 'lock' it into place.... yay thanks so so much for this video.

@SilhouetteSchool 2 жыл бұрын

Glad it helped

@annledford2888 3 жыл бұрын

Great video! Thank you!

@pinkdiva9884 Жыл бұрын

Thank you sooo much you really fixed my blade and my mood in the same time :)

@SilhouetteSchool Жыл бұрын

Haha happy to hear that

@fresh4ujh 3 жыл бұрын

Thanks for the info ☀️👍

@rinaalla3912 2 жыл бұрын

thank you so much. this is very helpful

@JamesBowkett36 Жыл бұрын

Literally the first thing you said I was doing wrong 🤣 no wonder it wasn't cutting... thank you!

@latoyamatson6197 Жыл бұрын

Because of you I'm finally up n running. Thank you

@InspiredSignStudio 2 жыл бұрын

Melissa I have a new one for you... I tried everything you suggested before realized my BRAND NEW autoblade was defective. The blade itself is turned slightly to the side so it was never cutting cleanly and rarely all the way through. Thanks for these great tips. I'm learning a lot!

@SilhouetteSchool 2 жыл бұрын

Oh wow!

@RinkaHeart 3 жыл бұрын

That was extremely helpful 😍 thanx alot

@SilhouetteSchool 3 жыл бұрын

My pleasure 😊

@elainebyrne8907 Жыл бұрын

Thank you so much I was beginning to think I was going mad!!!!!

@bpmcalist 3 жыл бұрын

Thanks for the help when I replaced my auto blade with a new one I haven’t been able to get it to work. I actually have gone through 2 new auto blades with no help on getting them to work. I don’t have any trouble using the ratchet blade but I do like the convenience of the auto blade. Guess I just got a bad batch of blades - unfortunately I ordered 4 of the auto blades when I got my Cameo 4. You always give such great advice! On another note I haven’t been able to connect via Bluetooth since I got my machine - I went through the steps on the Silhouette site no help - any helpful tips on that? I had no trouble with my cameo 3.

@berdineluscherberry4801 3 жыл бұрын

Thank you. Was looking at the two presses you have behind you, which ones are they?

@hugohernandez6968 Жыл бұрын

ty for the info. this has been really helpful with the issues i have. I noticed that it wouldn't click past 4 which makes sense. ty!

@SilhouetteSchool Жыл бұрын

Glad it helped you

@EVERYTHINGWILLBEALRITE1. 2 жыл бұрын

Appreciate the help 💨💨

@OtanaAhana 2 жыл бұрын

Thank you for making this video! I couldn't for my life understand how it couldn't cut through my address label sticky paper even with blade on 8. Turned out the instructions never mentioned the "lock & load" part. I put in the blade, but never locked it, so it got constantly pushed up at the very beginning 😅 Ooops...

@debbiecompton7091 2 жыл бұрын

Thank you!

@maryryan9345 8 ай бұрын

thanks for the video, i wish my issue was here! Just bought a brand new sihouette studio 3. the blade was working fine this morning and then suddenly out of no where its not cutting anything, after so much trial, effort, and going through anything i could to get it working.

@brimages1185 3 жыл бұрын

Thanks for fixing my issue

@ljgilliams Жыл бұрын

Exactly what I was looking for thank u so much 💞 frustrating not knowing why my blade wasn't cutting 💞💞 Appreciate you 💞🌹💞

@SilhouetteSchool Жыл бұрын

Glad I could help!

@roccrowdz6634 9 ай бұрын

So helpful thanks!!!!

@carolinas6614 5 ай бұрын

Thank you! This video was very helpful!!

@SilhouetteSchool 5 ай бұрын

I'm so glad!

@lorinorth3699 2 жыл бұрын

Thank you! Was ready to go buy a new machine! It was a tapping issue.. the hole was full of crap and didn't tap correctly so I was cutting at 5 depth instead of 2. :)

@SilhouetteSchool 2 жыл бұрын

Glad it helped!

@veronicarenderos6659 Жыл бұрын

This video helped me so much!! Thank you so much !!!!

@SilhouetteSchool Жыл бұрын

You're so welcome!

@rhonafearco1894 2 жыл бұрын

Thank you 😘

@Madurbangardeners 10 ай бұрын

Thank you! This video helped me tons!!

@SilhouetteSchool 10 ай бұрын

Glad it helped!

@geekyfeels Жыл бұрын

Thank you so much, this was super helpful! The only thing I'm struggling with now is figuring out which setting I should use. I make stickers but I laminate the sticker paper so I'm not sure what material I should put?

@SilhouetteSchool Жыл бұрын

Hey there! Check out this blog post: www.silhouetteschoolblog.com/2022/02/how-to-make-waterproof-stickers-with.html

@sheilacarmack9977 2 жыл бұрын

Best advice ever! The settings are incorrect...recommend #14. Love your videos because you don't waste a lot of time. Thank you

@annamariecafe1731 Жыл бұрын

Very helpful😍

@nahnisjourney1406 Жыл бұрын

Thank you!❤

@augtheo28 4 ай бұрын

Thank you so much !!!!

@jrr6833 2 жыл бұрын

Thanks!!!

@DeniseLWrightHiers Жыл бұрын

Thank you

@pixpusher Жыл бұрын

THANK YOU!!

@Spiceyynachoos 2 жыл бұрын

Oh my god I just purchased this and ran through almost 2 vinyl rolls scratching and ruining it struggling for the past week and a half trying to figure out why it wouldn’t cut!!! I had it positioned right but didn’t know I had to push it in to LOCK it just tried it it actually worked design is horrible but still learning how to cut correctly lol

@melodyrice7942 3 жыл бұрын

Got my Cameo 4 in Jan of this year. And had nothing but problems with the auto blade. All of the above did not work, so got a ratchet blade. My husband got me a Cameo 3 for Mothers day and I LOVE that auto blade. No problems with the 3 blade like I had with the 4 blade.

@mab4145 Жыл бұрын

I HATE my Cameo 4 Pro. Cameo 3 is a workhorse, though.

@puspagurung3846 4 күн бұрын

thankyou it helps me alottttt

@andyussery8495 2 ай бұрын

Thanks. #3 did it for me. I knew that but when I cut and there are small areas I always check to see that they didn't get pulled out. If they did, I see if they are still hanging around. If not, I clean out the inside of the blade carrier. I guess a couple tiny pieces got away from me. I use Oracal 651 and had to set the blade depth at 2 and force at 13. This new cameo 4 is awesome. I used a basic cameo (1) for many years. Now....how do I know when I need to replace the blade? I run it for about an hour a day (cutting time). With the autoblade I have cut back on adjusting time tremendously but I think my blade needs to be replaced soon. Had it about 2 weeks. How will I know for sure?

@danielannang5444 3 жыл бұрын

thanks for the video

@SilhouetteSchool 3 жыл бұрын

You bet!

@ezzd4255 4 ай бұрын

Awesome vid and thanks so much

@SilhouetteSchool 4 ай бұрын

Glad you enjoyed it

@camgodchubbs 2 жыл бұрын

Thank you so much!!! I changed my force setting to 14 and it works perfect for HTV!

@fuzzywuzzypetz3697 2 жыл бұрын

Hope I fix this SOON. I'm about ready to get the cricket.

@tineivarsson2481 Жыл бұрын

THANK YOU!!!!!

@AlexAguilar 2 жыл бұрын

I was trying to use my portrait 3 and was wondering why it's not cutting at all. Like I tried 5 times and was looking at the blade. it's not coming down. And so I tried what you said about the first prob. apparently it's NOT LOCKED IN correctly. Thank you so much! It's my first time using my machine. LOL.

@kristagaulin4482 2 жыл бұрын

NO JOKE same. First, it wasn't reading the registration lines, then not cutting, I finally read the user guide and found my blade was not locked into place. Now I just have to get better sticker paper that won't curl up, Its never-ending.

@SilhouetteSchool 2 жыл бұрын

So glad you got it!!

@SilhouetteSchool 2 жыл бұрын

Try using a brayer to adhere your sticker paper to your mat, it's super helpful for good cuts! www.silhouetteschoolblog.com/2019/12/why-and-when-to-use-brayer-silhouette.html

@kristagaulin4482 2 жыл бұрын

@@SilhouetteSchool it’s curling up after I take it off the mat

@AlexAguilar 2 жыл бұрын

@@kristagaulin4482 They said to curl the mat instead when taking it off. like flatten it, sticker facing down then pull up the mat so it won't curl when you remove it.

@tshirtbusinessreality Жыл бұрын

AAAAAAAYYYYYYYYYEEEEE LOL my blade had tha gap🤣😂🤪😝 and I have been dealing with this for 30min!!!!!!!!! just go to a video first lol😆😁😂😊

@akl4838 6 күн бұрын

Saaame !!!! Thank u soo much

@neamanabil2359 7 күн бұрын

wooooow thank you you help me alot

@donnabrown9808 2 жыл бұрын

First cut was perfect, but the others won't even cut thru plain cardstock. I followed all your advice so I guess now i go buy a new auto blade. I just got the cameo 4 plus and was so excited, now i dont know.

@SilhouetteSchool 2 жыл бұрын

Hey there! I'd check out this troubleshooting blog post: www.silhouetteschoolblog.com/2019/11/silhouette-cameo-4-autoblade-wont-cut-5.html

@bharathyemunula3009 Жыл бұрын

Thanks alot my blade is not cutting and even not changing the levels am opend the blade as per second factor its jammed with dust i cleaned properly now its working properly once again thank u so much ( i thought need to by new blade u saved my 3000/- rs)

@SilhouetteSchool Жыл бұрын

That's great.

@resinhandmadecrafting1815 Жыл бұрын

vynil htv is the same name for FLEX ?? and can you make a video for how to clean our cameo 4 ?? specialy from dust , and is there some oil we must apply it ??

@ElizRodriguez1 2 жыл бұрын

i love this video. Where in design space i. an find the force to adjust de autoblade?

@SilhouetteSchool 2 жыл бұрын

The Force setting is found in the Send panel.

@miltzytapia 7 ай бұрын

Thank YOu! you save my life!

@SilhouetteSchool 7 ай бұрын

Glad to hear that!

@lindyholland3273 11 ай бұрын

I couldn't cut with my cameo 4 and then realised from your video that i had to click the carriage against the blade LOL thank you

@delscoville 2 жыл бұрын

I bought a used Portrait 3 that wasn't cutting very well, turned out there was a lot of debris inside the autoblade. I had already ordered a new autoblade. The macine didn't have the tool, but I did order one from Silhouette. I'm pondering getting a Cameo, but my printer only does up to 8.5x14, so no real need for a larger cutter.

@777StarrySky 4 ай бұрын

Hi Melissa, I have Avery adhesive laminate and HTVront sticker paper. I need a depth of 7, force of 20, and speed 3 to cut through the materials, sometimes I need multiple passes! I read that depth is too much, but I cannot get it to cut through on lower depth and force. Can you please give me some advice? Thank you for your tutorial! :)

@scarrrizzle 2 жыл бұрын

Hi, thank you for this video. Do you know how to use a replacement auto blade that does not have the flat back? It's the only kind that Silhouette offers now and my machine doesn't seem to read it without the smart metal chip in the back of the flat version.

@SilhouetteSchool 2 жыл бұрын

Hi there! The round autoblade is for the Cameo 3 and would not work in a Cameo 4. You will need a different blade. Check out this blog post for Cameo 4 compatible tools: www.silhouetteschoolblog.com/2020/09/silhouette-cameo-4-tools-and-blades.html

@fallenmacleod 3 жыл бұрын

I had no idea about the tool! I couldn't believe what was inside my blade! 🤭😳

@SilhouetteSchool 3 жыл бұрын

Yeah sometimes there's a lot of junk in there!

@user-sj7sj3ku8l 10 ай бұрын

My original Cameo just bit the dust after 8 years. I'm ungrading to the bluetooth Cameo 4. I'm just here getting the lowdown on the auto blade before it arrives. Stupid question, why don't they just correct the setting in the Silhoutte software, Ugg...rhetorical question really...but, UGH. God love you for putting up with us. 🙂

@mikeledee8786 Жыл бұрын

I have had my cameo 3 for a few years now and it seem as if the spring for tool one is getting weak, any suggestions on how or were to get it fixed? Thanks

@littlestar830 Жыл бұрын

Hello! Do settings vary depending whether or not you are using a mat? I've usually used the Vinyl Oracle 651 setting which I've used before but recently I've mostly been using a mat. Once I try to cut the vinyl without the mat the blade cuts all the way through and the whole vinyl starts to move and get damaged. I got a new blade because I hadn't changed it in almost 9 months but it hasn't helped. It either doesn't cut at all or it cuts all the way through. I need it to do a kiss-cut using a long roll of vinyl without a mat.

@SilhouetteSchool Жыл бұрын

Hi @littlestar830, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html

@adinkracrafts 2 жыл бұрын

Thank you for this. I hadn't cut since the start of December because the cutting kept going off. I checked my autoblade after I watched this video, lo and behold it had cracked in 2 places. Glad I had another autoblade to replace so I could try again.

@SilhouetteSchool 2 жыл бұрын

Glad it helped!

@hunydalila 2 жыл бұрын

Hi . I like to watching your content . Easy to understand and completely details when explaining . So , I want to ask something . First, can I can photo paper 230gsm without cutting mat ? Second, I have problem of my setting my blade depth to 7~10 but my photo paper still not cut until till the end . Hopefully u can answer my problem . Thanks in advance.

@SilhouetteSchool 2 жыл бұрын

Hi there, you may need to increase the number of passes for thicker papers. Also check out this post about cutting without a mat on the Cameo 4: www.silhouetteschoolblog.com/2019/06/silhouette-cameo-4-matless-cutting.html

@hunydalila 2 жыл бұрын

ouh i see . thank u so much . i'll try after this .

@ddeweypink Жыл бұрын

When using the new manual 1mm blade do you change the force to a 14 as well for vinyl and htv?

@SilhouetteSchool Жыл бұрын

Yes!

@afleming1277 Жыл бұрын

I literally just bought the Cameo 4 today and set it up to continue cutting something I was working on when my Cameo 2 would no longer hold a blade. I sent the same design through like 4 times, with this new blade/new machine, used the Card Stock - heavy textured setting, increased the blade from 3 to 4, and put the force from 30 to 33. It STILL wouldn't cut through the card stock all the way. I kept checking the auto blade was installed all the way, and kept checking it. There was no rhyme or reason ... and after doing it 4 times, I'm still having to hand cut out the rest of the design with an exacto knife. I'm aggravated!

@SilhouetteSchool Жыл бұрын

Hey there! I suggest going through the full troubleshooting blog post here: www.silhouetteschoolblog.com/2019/11/silhouette-cameo-4-autoblade-wont-cut-5.html

@JazzyJae88 Жыл бұрын

I just got my Cameo 4 and already it’s not cutting. The autoblade feels like it’s going to break when placing it into the housing. I’ve heard such great things but this is one hell of a learning curve.

@SilhouetteSchool Жыл бұрын

Hi JazzyJae, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html