Cementing the verges to complete a tiled roof. The old boy method...

Рет қаралды 112,340

Building with Budd

3 жыл бұрын

This is the old boy method on cementing the verges of a roof.

Пікірлер: 216

@nickbremner6274 3 жыл бұрын

You're a good all-round bricky Mr Budd, keep uploading interesting videos of your work.

@merrickyusuf2341 2 жыл бұрын

You prolly dont give a shit but does anybody know of a tool to get back into an Instagram account?? I stupidly lost my account password. I love any assistance you can offer me

@kylendonovan9470 2 жыл бұрын

@Merrick Yusuf Instablaster :)

@merrickyusuf2341 2 жыл бұрын

@Kylen Donovan Thanks for your reply. I got to the site on google and Im trying it out atm. Looks like it's gonna take quite some time so I will reply here later when my account password hopefully is recovered.

@merrickyusuf2341 2 жыл бұрын

@Kylen Donovan It worked and I actually got access to my account again. I am so happy:D Thanks so much you really help me out!

@kylendonovan9470 2 жыл бұрын

@Merrick Yusuf happy to help =)

@guitarpaul3645 Жыл бұрын

Thanks for the video. One bit of the job I was unsure about!

@BuildingwithBudd Жыл бұрын

Cheers for watching

@Rogerdodger-z7x 2 жыл бұрын

Professional roofer here: Everyone watching this, please remember this guy isn’t doing it correctly, the roof pitch looks too shallow & verges should be bedded not pushed mortar in with bits of rubbish here and there, this verge will fall apart in 5 years as there’s isn’t enough mortar in there. The video shouldn’t be followed for educational purposes & the chap doing the work should make this perfectly clear. Also there should be lead flashing fitted to the wall abutment at the top of the roof not cement layed on top of the tiles, any movement in the building & this will crack and cause a leak. Not to mention the batten at the verge shouldn’t be close to edge as it is in this video nor should the roof membrane be so close, all this will suck moisture through the cement verge & cause rotting.

@BuildingwithBudd 2 жыл бұрын

Frankie , if you listen on the video I did explain that this is a temporary set up , it was the best cost option for us at the time, we had tiles left from another job, I didn’t want to spend money on a proper flat roof, also I explained that you would normally fit lead over the cement at the point of meeting the building, I can’t disagree with what say, the next chance we get to film a roof we will then you can see what we are about, the whole building will be flattened in the near future, many thanks for taking the time to watch and comment, Cheers from Old budd 👍

@richardgrant7055 Жыл бұрын

@@BuildingwithBudd Good traditional builder - balls it up AND still got an excuse !!

@hughrodgers5171 Жыл бұрын

Would you put water proofer through your mortar mix

@dugegg 4 ай бұрын

This is wrong but when bedding verges with a pan tile I do like to throw some muck down first, squash some broken tile in, then out more muck on top. Them pantiles can be a right pain to point up because the bed is so big. I find that helps

@kennydieu2694 2 жыл бұрын

Thanks for sharing

@coggsy3036 3 жыл бұрын

Right cowboy job fair play

@niknoks7638 2 жыл бұрын

Brilliant vid just what I was looking for ....now to find me some crappy old tiles to break up 👍👏

@BuildingwithBudd 2 жыл бұрын

Cheers Niknoks thanks for watching 👍👍

@danmartin6515 3 жыл бұрын

Love the birds mouth on bottom course lovely 🤣

@freakyscumbag 3 жыл бұрын

I wouldn’t be able to live with myself doing work like that, them tiles should be bedded ,everything is wrong with the felt and under cloak, ,and that lead work at tops a classic??? But I must admit that it would make a great education video ,,for how not to do it

@adymoore132 2 жыл бұрын

Just realised he is serious. Even funnier. Mate give it a break. 😂😂

@scottbrannan8109 3 ай бұрын

lovely job

@paulperrin2152 3 жыл бұрын

What was mix3 to 1??, ifyeswhy ??, why no lead flashing on top row of tiles just a fillet ??

@carlmerryfield4930 3 жыл бұрын

Stick to building m8 that roof degree is far too low for any tiles

@fuzzzeballs 3 жыл бұрын

pitch and guage if it's right now leaks but house concrete tiles are shit, I hate them

@Hew.Jarsol 8 ай бұрын

It must be the fish eye camera lense.

@winnieman-fx1hu 4 ай бұрын

they look level😂

@illmitchjax 11 күн бұрын

What pitch do you think it is??...

@sorryrocco 2 жыл бұрын

Your supposed too bed the verge tile onto a bed of compo, then point it up when the first lot has gone off.

@Hew.Jarsol 8 ай бұрын

Compo?

@sorryrocco 8 ай бұрын

@@Hew.Jarsol compo, composite another name for mortor. Sand & cement.

@BB-tx8ty 3 жыл бұрын

Quickest way is to take the tiles off then put your muck in then placing tiles back, so essy and simple, the tiles have more compression as well so it's stronger!

@stevesmith3850 3 жыл бұрын

Just what I was going to say,bed the mortar high and then press the tile on,the times iv seen people bed the tile on then they scrape it back and point over another day only to find in a year it falls out cos its only half inch think

@BB-tx8ty 3 жыл бұрын

@@stevesmith3850 it takes a lot longer that way and it's less strength as theirs no compression from the tile into the muck! UK Construction industry has gone backwards in a lot of ways, power tools make workers look better than what a lot of people think

@breadmanted 2 жыл бұрын

Why not do it properly ??? Bed the tiles in ,,rake back and flush point when it's set!!! To many ROOFER'S not doing it right these day's

@BB-tx8ty 2 жыл бұрын

@@breadmanted As I've stated my way doing it you pack in as much compo as possible for the tile to be placed back down again, this way the muck spreads out and force the muck back in again with a gauging trowel how I do it then angle the muck flat to the cement board, muck has to be a little stiff but workable, I see loads of guys packing muck in without taking tiles off which takes them all day to do when it should be done in less than half that time, UK construction industry has went downhill big time, big guys earning huge profits off the working man, not enough older guys taking young people on and when they do they use them as labourers for cheap pay and don't learn them much! 10 years time the UK building workforce will have lost a lot of people and a lot of knowledge how to do things because of greed

@kevincasson9848 2 жыл бұрын

Your talking shit! Cowboy! The man is perfection personified!!

@Brick_dont_hit_back Жыл бұрын

Can you nail through this verge board ?

@MrWhothefoxthat Жыл бұрын

hope you had a good Christmas, so your cementing the facia, so you got the roof tile, so whats the board called you've put under the tile to rest the cement on, i think they used asbestos board in the day, is it cement board. thank you.

@xxwookey Жыл бұрын

Yes, 'cement board' replaces the old asbestos cement board.

@AaaaandAction 5 ай бұрын

Undercloak

@robinmuirhead2617 2 жыл бұрын

Excellent so you reckon it beats the latest Dry Verge Plastic efforts then lol

@frankiez7414 8 ай бұрын

Should have used sharp sand. Also what happened to the lead flashing ? I wonder what it looks like now ?

@ferenczsinko6770 2 жыл бұрын

Liked & Subscribed. Can I ask why you put the broken bits of tiles in. Is it for strength or just so I can use a bit less cement mix ? Storm Eunice took my verge tiles off so intend to replace using your video as a guide. Thank you for making this video.

@BuildingwithBudd 2 жыл бұрын

Ferenc we put the broken bits of tile to help the cement go of, if not it hangs wet for a long time, many thanks for watching 👍👍

@asroofingservices 2 жыл бұрын

Put a bit of rapid cement in with the mix that will help

@plaintiler Жыл бұрын

If you put your verges back on the same way as this!......you'll be redoing them again in the future too

@TheTimutube 10 ай бұрын

@@plaintilerrubbish

@markbucsenac5835 Жыл бұрын

I've never seen anything like this in my 16 years of roofing, bed the verges, put a flashing at top edge, most importantly that roof is basically flat, board it and fibreglass, that's a leak waiting to happen

@JJ-jh6hz 3 жыл бұрын

What pitch is that roof lol looks too shallow for the headlap you have on the tiles, let me guess you battened it out at the max gauge?? 😂

@Tokaisho1 Жыл бұрын

I think it's an illusion with his camera work as it looks better at the end of the video when looks at it from the ladder lol

@orangelinn9547 Жыл бұрын

Did this leak?

@Presumin0Ed 2 жыл бұрын

Great vid :) Are you in Suffolk? I'm in Sax and three big bits of the concrete recently fell out of the verges (of my 400-year-old house). Almost hit me cat! :O ;) One of the barge boards is a bit knackered too :/

@BuildingwithBudd 2 жыл бұрын

Old Norfolk boys , don’t get over the border much, cheers for watching 👍👍

@5eurocups2005 2 ай бұрын

Are the roof tiles suppose to be level? shouldn't they be slanted going down?

@chrisbels8568 3 жыл бұрын

The felt should go under the undercloak because the cement will now corroded it and now your mortar is set on a floating surface. The mortar should be cut to the underside of the tile and not up onto the tile face edge as it’s too thin, will crack and then open up the bed. Felt shouldn’t be going into the gutter too as it will rot out. The cement fillets at the top have been banned for years as the lack of movement and again will leak.

@sorryrocco 2 жыл бұрын

Your as bad as him, compo doesn't rot type 1f or modern felt.

@jerryd8107 2 жыл бұрын

@@sorryrocco And here is the problem with builders - no two agree on method. How is the householder supposed to judge whether the person they're paying is doing the job properly ?

@justbreakingballs 2 жыл бұрын

@@sorryrocco Why not?

@sorryrocco 2 жыл бұрын

@@justbreakingballs why not what

@davidfarr8217 10 ай бұрын

Very nice work, sir!

@BuildingwithBudd 10 ай бұрын

Thank you! Cheers! 👍

@davidbuglass1992 3 жыл бұрын

Beautiful job mate

@7xJack_ 3 жыл бұрын

Great work bud..you from norfolk?

@BuildingwithBudd 3 жыл бұрын

Thanks and yes

@kevinhall2829 2 жыл бұрын

Can we see it after a year

@christopherhernandez3398 9 ай бұрын

Lovely indeed. Great job highest skill level

@ciebrown1639 3 ай бұрын

No lead flashing where the roof meets the house?

@ifigeneiabamparatsa1498 7 ай бұрын

Hi, can you tell me please if it's working... thanks

@BuildingwithBudd 7 ай бұрын

It’s working fine , it is only a temporary solution, we were going to flat roof it but we had some tiles left from a previous job, it just worked out a lot cheaper option at the time, but in answer to your question it’s working fine 👍

@Ben201-k2e 6 ай бұрын

I can guarantee the verge will have cracks all over it as he didn't put a slight lip on the cement verge going under the side if the tiles, which makes the rainfall run straight into the cement and as I say causes cracks.

@smtsoftwaresolutions1966 2 жыл бұрын

I hope that's your own property, if not there will be a very unhappy customer when the fillet cracks, the end tiles blow off in a moderate wind and the felt rots in the gutter. I would also question the pitch of the roof for the tile used.

@BuildingwithBudd 2 жыл бұрын

Just to put you in the picture it is our own place and it’s just a temporary set up , we had the tiles spare from another project so we used those instead of a fibre glass or rubber roof, I did explain that it was only temporary and no lead as it’s not going to be there long, you are totally right in what you say, it is just a way to get to another point, really appreciate you watching the video 👍👍

@jasonvincent8787 3 жыл бұрын

Wow

@sambathews6602 2 жыл бұрын

What type of tiles are they?

@BuildingwithBudd 2 жыл бұрын

They are not the right type for such a low pitch, they were just some we had left of a job, and as it is a temporary building, it was the cheapest option, 👍 thanks for watching

@Skols-se7jn 2 жыл бұрын

Pan tile

@whitwoodkidwhitwoodkid9794 10 ай бұрын

meant to bed the verge then compress the tile down then point it off pushing cement in like that won't last plus your underlay should be under your cloak, plus the pitch of that roof you've used the wrong tiles or you need mor than 75 mil head lap

@louiscurtis1334 3 жыл бұрын

Cowboys🤠 verge tiles should be bedded down not just pointed and putting broken bits of tiles in won't last 12 months

@jimralph8066 Жыл бұрын

Wonder did water blow up under the tiles 🤔 at this low pitch tiles should have a greater lap

@user-gb7rk9wp7m Ай бұрын

Shouldn't the undercloak be over the felt and not under??

@frankiedancaster4424 3 жыл бұрын

I never liked lead anyway

@petetheroofer3321 3 жыл бұрын

What's the pitch on that roof?? Certainly looks far too shallow for tile?

@Richierich567 3 жыл бұрын

Idk about Building with Budd it should be Building with Bob 😂

@perfektrepairs7934 3 жыл бұрын

Only roof for that pitch is a flat roof, will leak like crazy with them tiles, why use a cement fillet on the back should be a lead flashing chased into the wall. Cement works nice but you are no roofer sorry

@loganrose.9209 3 жыл бұрын

100%

@Skols-se7jn 2 жыл бұрын

👍😂😂😂😂

@rogermaynard2405 Жыл бұрын

Bed the tiles on. Once you’ve bedded them on you’ll be able to point them up. A much better job. Put some SBR in the muck and you won’t get any sag

@BuildingwithBudd Жыл бұрын

Cheers

@magpie73 Жыл бұрын

I think this guy got the word old boy mixed up. Should say cowboy 🤠

@stevegreenly2259 Жыл бұрын

Where to start? 1. Membrane should be under the undercloak not on top. 2. Where's the felt support at eaves level? No membrane should be be fitted into the gutter. Also the first course is drooping - I suggest no eaves ventilation has been fitted. 3. Nails? I can't see any nails in the top row, which makes me think there are no nails fiited at all. 4. Roof pitch? The roof seems far too low for a single concrete pantile. 5. You should not mortar into an abutment. There should be a dry abutment fitted and / or lead flashing

@fesnas 2 жыл бұрын

If the cement cracks after some time, I should just add more on top?

@joelprinciple7519 3 жыл бұрын

Nice neat job. Isn't it better to use flashing for the top of the roof rather or as well as concrete. If the concrete cracks or there is any movement, rain water is going to run off the wall behind the concrete verge?... Pro's educate me please..

@MrSmoore77 3 жыл бұрын

No education needed pal your bang on

@joelprinciple7519 3 жыл бұрын

@@MrSmoore77 Thank you for responding.

@mattjackson1732 3 жыл бұрын

Yes your right cementing like that was done back in the day no good wants lead

@donal1982 2 жыл бұрын

Absolutely shocking job 🙄 As everyone has already said, the tiles need to be removed and bedded and felt goes beneath the undercloak. Timber roofs move too and that is why we use lead flashings instead of fillets. Your cement mix is too dry too, won't adhere properly.

@tgale3866 3 жыл бұрын

What pitch is that roof ?? 😂😂😂😂

@endalynch6877 2 жыл бұрын

No lead flashing? Pitch is too low for tiles!

@seanwalker1972 2 жыл бұрын

Alot of ppl saying should be beded and I agree but try do a regent tile 1st looool you need to use very stiff muk otherwise youre having a bad day

@jasonjaques9421 2 жыл бұрын

Lol just take the tiles off and bed on properly 🤠🤠

@nonsheep5823 2 жыл бұрын

Looks shallow pitch ? Lower than 15* and your in trouble also head lap of tiles wellout of spec. Max is 100mm your on at 75mm , lead flashing needed to be chased into render, that mucks blown already ibet , still the customer would think it looks good

@johnbowkett5920 3 жыл бұрын

That pitch looks bloody low ???

@BuildingwithBudd 3 жыл бұрын

It is very low. However the building is only temporary

@johnbowkett5920 3 жыл бұрын

@@BuildingwithBudd ☺☺☺☺🙂

@raybans8712 3 жыл бұрын

@@BuildingwithBudd why spend the extra money on tiling it then A tiled roof costs more than a flat

@BHP15 Жыл бұрын

that is the cowboy work. you need tons of cement for that way of job.🤣🤣🤣🤣🤣🤣

@rossko727 Жыл бұрын

This is how not to muck a verge! Take the tiles off then lay the muck then you put the tile on to the muck pushing it down for a nice bond, the way in the video will be loose and within a year or two

@paulcollins6221 3 жыл бұрын

Should have cut tile at lowest point shallower less cement

@kevincasson9848 2 жыл бұрын

Great job man! However, round the tip of ya trowel off somewhat! Ya wont have to go over it so much then. Apart from that, first class!!

@calvinwilliams8547 5 ай бұрын

Should bed tiles that will all pop

@Tonyprice703 7 ай бұрын

Use a margin trowel, and a ridge trowel

@robertcaswell3914 2 жыл бұрын

Should have let the dog run that verge

@Christopher-zt9eu 2 жыл бұрын

Speechless....absolutely horrific!!! Is this a joke?

@paulmilbourne1 2 жыл бұрын

How not to do it .. bad bad work

@paulcollins6221 2 жыл бұрын

It will crack first hot day

@Zackerzac789 7 ай бұрын

😮

@big.a1131 2 жыл бұрын

Not enough pitch driving rain will piss in

@MrCamgavin 2 жыл бұрын

Should of been a flat roof. Way to shallow for roof tiles 😂

@rinzler9775 5 ай бұрын

Wall to top of roof needs flashing. That won't hold.

@eliteservices1509 6 ай бұрын

😂😂 pitch on that roof it’s gonna leak like a sieve.

@tonyford5326 9 ай бұрын

Not really how you bed tiles but each to their own mate 40 years doing it

@paulgale9872 2 жыл бұрын

Why have you got tiles on a basically flat roof and you bed tiles into the compo not pushing it in like that there's so much wrong with that I don't know were to start

@BuildingwithBudd 2 жыл бұрын

Paul You totally right, but it is a very temporary roof, we used up some bits and pieces we had left, we could do the job ourselves, and we didn’t have to pay a flat roofer, it’s a means to an end, many thanks for watching 👍

@lyndaking8653 Жыл бұрын

OMG

@jayashfieldmorris9938 2 ай бұрын

Gonna run out of mix there

@kevincasson9848 Жыл бұрын

I love Buddy lol

@mick949 3 жыл бұрын

what a bodge i hope you paid the customer thats rough as fuck hardly any over hang on the gable

@jjoerogers86 2 жыл бұрын

That pitch is far too low for those tiles, water will piss in

@tgale3866 Жыл бұрын

Should of fibre glassed it

@BuildingwithBudd Жыл бұрын

It was a case of using up what we had, it is only a temporary roof 👍

@carlmerryfield4930 3 жыл бұрын

Bob the builder🤣🤣

@leerutherford5586 2 жыл бұрын

Iam also a retrobate

@aidanmccann7111 9 ай бұрын

Oh good god. Roof pitch is way too low for them tiles. So there was never a need to use lead for flashing just use mortar!!!. Has this roof been replaced yet

@maikdittrich5727 Жыл бұрын

So wurde vor tausend Jahren gebaut...

@plaintiler 10 ай бұрын

😂where are your horses?

@leec7180 Жыл бұрын

A flat roof has more pitch than that .

@BuildingwithBudd Жыл бұрын

Totally agree we did it as a temporary set up, as we had the tiles left from something else, it has 18mm ply underneath, but doing it this way was just so much cheaper and easier at the time, it did the job. Cheers for watching 👍

@scarey260606 5 ай бұрын

Shocking to be fair so much wrong with this roof 😕

@stevenodonnell6318 2 жыл бұрын

Take the tile off and bed it properly with a decent amount of muck , cant just push it in, does nothing

@kawasaki32 2 жыл бұрын

Cowboys there is no where near enough fall on that roof and you bed the tiles not point.🤠🤠🤠🤠

@BuildingwithBudd 2 жыл бұрын

007, we know , this building is only a very temporary building, we just used materials that we had left, when we get the chance to do a proper roof we will, thanks for watching 🤦‍♂️👍

@jackbateman5849 10 ай бұрын

Never seen anything like it 🤦🏽‍♂️. Bed the tiles! Whats all the broken bits of tiles going in there for aswell 😂. Also that pitch is to shallow for them single pans.

@FrancisLeamy 18 күн бұрын

Not all cowboys ride horses😂😂😂

@donaldmorrison6147 2 жыл бұрын

What on earth is going on here

@gavinmountjoy7459 2 жыл бұрын

hurt my eyes watching that wow a how not to do it tutorial

@scrotewart2186 2 жыл бұрын

Never in my life 🤦‍♂️

@pilotanimal192 3 ай бұрын

Polish it up , no cherry blossom will sort that out .

@carlwilkinson6179 2 жыл бұрын

About 6° lol

@JeffersS13 8 ай бұрын

Shite! Tiles not bedded on to the mortar, felt on top of the cloaks, and lath ends in the mortar 😵‍💫

@labbo5591 2 жыл бұрын

How long do you guarantee your work, 1 or 2 weeks🤣😂😂🤣 what a bodger!

@BuildingwithBudd 2 жыл бұрын

This particular job I have given a lifetime no quibble guarantee, that’s how I rolled that day, 😀👍

@andrewcooke3806 3 ай бұрын

Wow just wow, the tiles are wrong for the roof pitch, that pitch looks about a 10 degree roof which should be a flat roof, and as for the cement I’ve never seen anything like this, wow

@smurftastic3928 2 жыл бұрын

I'm not a roofer though no lead flashing 😰

@BuildingwithBudd 2 жыл бұрын

It is actually a temporary building, it was a cheaper option than a complete flat roof as we had the tiles left from another job, this room is there for 24 months max, but I get what all the critics say as in there world they are right, but it’s a means to an end, thanks for watching everybody , keep building 👍👍