I only grind if the cap is rough or if obviously the old pointing is wild. Just a pressure clean with a little electric cleaner suffices for prep
@TKayCO3 ай бұрын
Beautiful work mate. I work on roofs everyday doing solar and roof maintenance (gutter cleaning, panels cleaning, solar bird proofing and minor roof repairs), don’t do much repointing at all but work around it and make small repairs sometimes. I would say the way you guys do it is only some by about 10% of roofers. So many roofs I work on are peeling from the top already when the pointing looks almost new. You can see underneath that the new stuff that the customer payed $3500 to get done is only 2mm thick with zero prep. It’s criminal. I guess that’s not surprising when anybody Is allowed to do it with no qualification or experience. As long as they don’t charge the customer more than $5000 per job they could be hiring a guy who has never stepped foot on a roof before. I saw that once haha. We hired a guy to fix a few broken tiles under the ridge and repoint and when he got up the first story roof he froze. Couldn’t climb the 8 foot ladder up to the second story. I had to go. Up and down it for him while he passed me stuff. This guy had a full van with all roofing and maintenance tools and long ladders and everything. Very odd. With the high demand for roofers these days many companies are saying no to a all jobs m, leaving a gap in the market which will be filled by unqualified guys with no experience. It’s just too much money to pass by if one is open to ripping off their customers and that’s a large proportion of tradies as you know. Luckily there are still plenty of customers who are willing to pair a fair price for good work. They way you guys do it may well actually save the customers money in the long run even if you are charging more than double.
@jerrycarr84754 жыл бұрын
There is something really satisfying about watching this
@nikolaiburroughs32512 күн бұрын
Fellow tiler here from NZ. Decent finish mate not bad at all. Still blows my mind you guys need water over there to get a smooth finish. Must be the heat huh
@Grub3704 жыл бұрын
Great video, thanks!!
@Stop..carry-on4 жыл бұрын
Very Neat , you have a lot of paperwork over there ,here in blighty roofers just show up and get on with it no question asked. Obviously complying with health and safety ie correct ladders ect
@Jonh707 Жыл бұрын
If the same exact tile roof is at an elevation that receives a foot of snow on the roof during the winter time would you still recommend having weep holes on the ridge or would that be a water entry point for a roof with sitting snow on it?
@eeiko3212 жыл бұрын
Hi, what’s the ballpark figure for repointing and repainting a single storey house?
@davidcaploiu3666 Жыл бұрын
Great video thank you
@jtveg Жыл бұрын
What brand of pointing was used? I'm interested to inow what the terracotta coloured pointing brand is and where to source it.
@eme14682 жыл бұрын
What size trowel do you recommend for repointing ridges
@lincolncollingridge88223 жыл бұрын
Outstanding
@MetalLegOnRuneskape2 жыл бұрын
Any tips for making your pointing look good? Have trouble with mess and inconsistency’s it doesn’t look dead straight
@joecutajar86395 жыл бұрын
looks good
@emiliosunshinewindows21428 ай бұрын
Cheers buddy, time for my first repoint
@santy331432 жыл бұрын
Very informative
@JoeMichelli4 жыл бұрын
Well done video, good voice over.
@alyce35143 жыл бұрын
In my rented house I can see 2 thin lines of daylight both sides of these ridge tiles all along the roof and the loft is damp. Is it normal to see daylight next to the ridge tiles or has the cement disappeared?
@ApprenticeGM3 жыл бұрын
If you can see sky in a direct line looking up, you have a problem - rain can definitely get in. There should however be weep holes (you can see these guys install them when re-pointing) which can let daylight in through holes. You have to determine which is the cause in your place. Best to get on roof and check if you can - if not possible flying a drone is useful and half the neighbourhood kids have them lol.
@flightofthefatman4 жыл бұрын
Good to see quality tradesman doing a thorough job. There's too much laziness and greed creating poor service and results in all trades. Keep up the good work and all the best.
@Stop..carry-on4 жыл бұрын
I find its the client always wanting cheap then moaning when they get crap
@stephenthackrah2078 Жыл бұрын
Wow people who’s not a clue praising a shit job
@Hahehhwgajshah72726..8 ай бұрын
Wouldn’t you power wash the roof before doing anything else.Some of that pointing is being troweled over dirty tiles.
@vbroder15Ай бұрын
@@Hahehhwgajshah72726..that’s why you do grinding
@ngoiquangngai3 жыл бұрын
Good quality skill
@MrSprocket2u5 жыл бұрын
best in the bussiness
@tannga17903 жыл бұрын
Set a good standard for tile roofers
@nallekarhu79942 жыл бұрын
Resetting would bee the best , probably quicker too.
@jonkelley18949 ай бұрын
Since hes not answering any questions. Could someone tell me the name of the product to buy in home depot s.Fla?
@danielcoetzee579310 ай бұрын
Yes, but WHAT mix did you apply..?! What is the product and what is the composition..?!
@m1chi13l Жыл бұрын
What grinding disc did you use? Diamond grinding cup?
@wheredoigofrhere3 жыл бұрын
Do you create weep holes on the side ridges or only on the top (the ridges stay parallel to the ground)? I didn't see weep holes on the side ridges
@jacobblack78412 жыл бұрын
The water travels down the back of the bedding mortar and goes into a water course of the next adjoining tile on hips. Only the very to rodgecap of a hip is weepholed
@JorgeRamos-xw6dy2 жыл бұрын
What is a good product to repoint the ridge cap. Thank you
@biggie16282 жыл бұрын
silicon
@Semaj.182723 жыл бұрын
Doe the repointing have to be this smooth ? Had a guy done my roof today but it’s not as smooth as this
@wheres_bears13782 жыл бұрын
Notifying neighbours of dust that won’t even affect them got to love our ohs laws lol
@lasor567892 жыл бұрын
my crew never does ihaha
@ln92014 жыл бұрын
Push n point for life
@johnpro28478 ай бұрын
my back would last about 10 minutes..good job
@marztar2 жыл бұрын
it's old world craft. it carries on. ridge lodge is the crevice. the housing to the hidden hand.
@jamescampenrusher_fanboy6419 Жыл бұрын
Can I have a quote on my roof for a repoint/Rebed on gables
@ETH852 жыл бұрын
This is how cowboys point ridges in the UK and is classed as a very poor job.. need to take the old bed out or at least take the mortar back more to give the new mix more thickness and more to space to grip under the tile.. pointing is becoming less now anyway due to dry ridge systems which are far better
@daeyvidd2 жыл бұрын
are ridge and hip tiles in the UK lapped or butted together?
@ETH852 жыл бұрын
@@daeyvidd depends on the style of the tiles.. some butt up and some overlap
@daeyvidd2 жыл бұрын
@@ETH85 I could understand that trying to repoint butted tiles would be considered lazy. I've never seen lapped ones supposedly from Britain before. I've also never seen a dry ridge system that I'm confident would stop wind blowing water up under the tiles and over the end of the half length tiles at the peak of my roof. The whole "tape is an adequate modern substitute for good building design of the past" also doesn't sit well with me either, if it weren't for those I'd ditch the mortar and go dry ridge too. Do you guys use flexible pointing? I could understand it being deemed not necessary with the relatively stationary ground you guys have up there.
@majorrgeek9 ай бұрын
the verb grinded is rare, more correct and better to use the verb ground - "once the old mortar has been ground back,...'
@DKNY-yh9fp8 ай бұрын
well done
@tahirallouch10862 жыл бұрын
Whats the weephole tool called
@francescodobherman34873 жыл бұрын
What a load of bollicks
@stephenc4161 Жыл бұрын
Love how you said grinded the tiles , ya Wally!
@coastwidek91324 жыл бұрын
Why not just re-bed and point? You could see the ridges were no longer bonded to the original mortar it would last a lot longer
@floydgraveling19103 жыл бұрын
if the ridges arent moving I understand just repointing, but yea if it's pretty solid may as well just repoint it 👍🏼
@frenchiefrog15643 жыл бұрын
Lol yeah you can clearly say mortar does not hold ridges anymore I bet you just pull it all. This pointing will last for 6 months
@jacobblack78412 жыл бұрын
The day after Ridge caps have been Bedded or re/bedded you can lift the caps off with your finger tips. It doesn't hold the caps it is more a bed for them to sit on before the top coat is applied
@coastwidek91322 жыл бұрын
@@jacobblack7841 lol that’s a hilarious response, I don’t know what sand cement ratio you use but you definitely shouldn’t be able to lift the ridge caps with your finger tips a day after bedding them in, to say they’re only bonded by the Flexi is an absolute joke, the ridges are BEDDED into the cement mix and should remain bonded for at least 20 years if the correct sand cement ratio is used
@1amelka2 жыл бұрын
@@coastwidek9132 Otherwise you will be picking them up from the neighbours yard on a windy day
@tinkletoesrus Жыл бұрын
just change all the top tiles and do it fresh
@gulllllll13 жыл бұрын
When do you know its time to re bed?.
@allanwesthead89763 жыл бұрын
I can see you take pride in your work nice job the problem with roofers too many cowboys out there they just want to make as much money as they can ?? you can't see what they're doing when they're up there no I don't trust a lot of Roofer's because of this ??
@brettknoss4864 жыл бұрын
I'd use compressed air to clean the old joint.
@onjofilms Жыл бұрын
Should I do this myself?
@howzit5406 Жыл бұрын
Waterblast it clean before pointing
@shaneellasdaicastrestorati36756 ай бұрын
Hi where are you located
@tayfurturkoglu40178 ай бұрын
Harcın adı nedir
@TheProdigy1982 Жыл бұрын
I don’t understand it, why don’t you re-bed them 🤔
@jjss23954 жыл бұрын
Pressure wash the ridges
@floydgraveling32563 жыл бұрын
@@briansteele4427 client probably didn't want a roof wash just a repoint? Dumbass
@jayc16762 жыл бұрын
@@floydgraveling3256 has it occurred to you how stupid your comment is yet ?
@MrSprocket2u5 жыл бұрын
BEST IN INDURISTY
@125spero4 ай бұрын
You could’ve matched a color a little little bit better
@CanYouHandleThisMan4 ай бұрын
Roof repointing diy
@jamessturgess16512 жыл бұрын
Why not just relay, less hassle?
@lukem22602 жыл бұрын
Whats best way to get rid of old pointing ?
@ivansabolek93342 жыл бұрын
You need to re-bed it, most of the ridges are loose and your only pointing over them
@GreatYue Жыл бұрын
Roof repointing is causing more harm than good. Rain water would back up into the interior should the cracks after some years. My 45 years-old roof does not have any pointing cement and there is no leak ever. Repainting the roof should be good enough to make it last longer, maybe 10 to 20 more years.
@jacobosborne972 Жыл бұрын
Licensed Roof Tiler here. Repointing is an important part of Roof maintenance. Flexible cement holds the ridgecaps and cut tiles in place and prevents ridges shifting or blowing off in heavy storms. Also, a 45 year old roof is not an old roof and you will likely end up with long term issues such a ridges slowly and making gaps. Aussie roofs come under fierce heat and flexible cement moves with the tiles as they expand when they get hotter Also, REPAINTING a roof does nothing to improve the roof or increase its lifespan, its 2 coats of paint, so it's purely cosmetic. No problem with that, but painting won't stop your ridgecaps blowing off the roof in a heavy storm, correctly applied roof pointing will.
@sgaws2 жыл бұрын
2:39 see the spray bottle. what is he doing with that ?
@brad150202 жыл бұрын
Spray the trowel with water when pointing and it makes it smoother 👍
@zeckham1003 жыл бұрын
Wasting your time., rebed or leave it
@jacobblack78412 жыл бұрын
You have no idea hahahaha
@fuzzzeballs3 жыл бұрын
looks like a bodge to me
@anthonyroofing3 жыл бұрын
Didn’t even need doing.
@louie.vision.52553 жыл бұрын
Just re-bed em ffs really bad work just repointing, first frost back to the way it was.
@llickmogan2 жыл бұрын
Man all that ,u should have just rebedded the whole thing ,ps I did tiling for 10 years
@lukem22602 жыл бұрын
So u should get rid of all old pointing ??
@billyblack49854 жыл бұрын
Rough as guts pointing and no safety rails installed around roof edges.
@oohsam4 жыл бұрын
They are wearing harnesses mate. Did you watch the video ?
@frankielov3 жыл бұрын
Re-pointing is cowboyish a bodged job 👎🏽
@petercollingwood41083 жыл бұрын
Weep holes could have been neater, shame you lowered your standards
@asroofingservices3 жыл бұрын
All.that loose pointing your showing us is the same stuff you put on the pervious year 🤣