Mr. LeClair is a class act. We are very lucky to have a man like him mfg and producing such quality items.
@LANPOCALYPSE10 ай бұрын
I would have to agree. I purchased a C4 rail with the mid length cutout and a couple of the mounting screws had their heads stripped. I emailed him asking what size the screws were and he emailed me back asking for my mailing address. He sent me not one but two whole sets of screws. Have purchased several CMR rails from him since then because not only are his products top notch, his customer service is as well.
@EarthAltar10 ай бұрын
Once again, the value of these videos cannot be overstated. Thanks Chad. You're the man!
@SchooloftheAmericanRifle10 ай бұрын
Thanks my friend.
@alexdrockhound949710 ай бұрын
Quite correct
@davisjames84845 ай бұрын
@SchooloftheAmericanRifle do you inspect just regular civilian rifles as well? I have a Diamondback DB15 that I've put around 20k rounds through and I'd love to see how out of spec it is.
@george21133 ай бұрын
@@SchooloftheAmericanRifleplease look at one of the new plastic receiver ARs (I saw one in the sportsman's guide catalog)
@JadedGLORY2689Күн бұрын
Absolutely love Centurion's stuff. Their Socom 14.5 Mid Length barrels, their quad rails with a FSP Cut Out/Mid length Gas, their chrome carriers and their E4 Tapered Bolts for their T Marked barrel extensions, and the fact that you can touch base with them about any of their products or if you have questions related to your build. I will continue to support them as long as I possibly can.
@AKMer4710 ай бұрын
Centurion is a very underrated company. Glad to see them getting some love.
@jackbauer418610 ай бұрын
Everything Centurion makes is absolutely top notch. They make the best combat barrels on the market, IMO. Gassing is perfect and accuracy is phenomenal for a Chromed bore.
@heatherkelley811510 ай бұрын
I’m thankful Monty put these out. The Knights ones have reached the unobtainium level and this will give others a chance for a solid comparable carrier. I know knights concentrates on government contracts but if I owned a company with this much demand I would definitely find a way to set up more facilities to make more. It is possible to scale and keep quality, and it seems they are just leaving money on the table.
@ThePatriotParadox10 ай бұрын
Hopefully people will realize phosphate chrome lined and chrome with phosphate keys and bolt are the way to go... And companies will flood the market with BCGS like this
@ASqdrnDA10 ай бұрын
@@ThePatriotParadoxAs Eugene Stoner intended with his hard chrome carriers from the beginning 😂😂😂
@RazorBrain110 ай бұрын
And.... they are sold out. Love what you do on this channel. You've really helped me learn so much I would have never looked for.
@SchooloftheAmericanRifle10 ай бұрын
I'm happy to say them being sold out isn't my fault on this occasion. They sold out immediately after being announced.
@peeeoii273810 ай бұрын
It’s true they were sold out in like 2-3 days after release I wanted to pick up one haha.
@DPBida10 ай бұрын
They sell out and come back in stock pretty often. Edit: Just sign up for their emails and keep an eye on the page. I think I got in on the second drop thanks to the newsletter. Pretty sure they were up for a number of hours too before selling out
@prone_wolf887110 ай бұрын
Damn lol I checked too 😆
@seanwhite30410 ай бұрын
I've been raving about Centurion for damn near 15 years . In 2009 I picked up C4 Quad rail and fell in love . I think it was 2013 or 2014 when i picked up an actual upper . Centurion is by far my favorite and Monty is well respected in the community . Centurion CM4 14.5 MIDWEIGHT HF with C4 Chrome M16 BCG and C4 12.5 Quad rail is IMO one of the best Uppers for the money . Can't wait until he makes Chrome Bolt to match but either way his Phosphate bolts are still super solid.. Nice video bro
@ryand802410 ай бұрын
Lol same bro, I tell people about this company and alot of them never heard about centurion, which is wild because I consider them a top tier. I bought one of their chf barrels with the double chrome bore. Solid af.
@seanwhite30410 ай бұрын
@@ryand8024 Their HF Barrels are freaking awesome because they use a Tapered Bore that aids in pretty insane accuracy. Especially for being C.L..
@douglasmilburn387510 ай бұрын
The service and value you bring to this community is inspiring.
@doktorfaustus10 ай бұрын
Regarding the vestigial hole through the firing pin retaining pin channel: I'll hazard a guess that Chris Bartocci tried to convince Monty to put the captive retaining pin in these carriers, as I believe those two are also friends and Chris is an advocate for the feature. I suppose it's for the best that it was omitted; imagine how awkward it would be needing to refer to it as the "firing pin retaining pin retaining pin."
@Demicron10 ай бұрын
*Breakaway Torque is the proper term for "reverse torque" in case you were wondering. Thanks for the great video! Carrier looks good.
@RewardedRocki10 ай бұрын
I bought a Sionics NP3 BCG after watching your videos and now it looks like a Centurion will be added as well. Thanks for the amazing content as always.
@curseofthegreat8 ай бұрын
Same
@scubamik37927 ай бұрын
I am building my first ar15 and was going to go cryptic. Now I am probably going to go sionics after digging deeper
@curseofthegreat7 ай бұрын
@@scubamik3792 I emailed Sionics last week, they said they should have some around the end of the month, so keep your eyes peeled, they go quick.
@savvycivvy56445 ай бұрын
@@scubamik3792 still need one? Sionics np3 bcg?
@stephenjohnson684110 ай бұрын
They look like very good BCG! Awesome camera work as usual. Thanks again Chad!
@onna-day704710 ай бұрын
Thank you! 😊
@brandonrich634210 ай бұрын
Wow I'm impressed with these carriers. I'm even more impressed after your testing and findings. I am for sure picking one up. Thank you for sharing with us sir. It is nice to see someone with your experience and years of knowledge passing that info along to the consumer. It is nice for the manufacturer as well, they can improve any issues or concerns you find. When a company sends products to you for testing, I personally feel pretty good about those companies. Even if you find issues, I think that the company being open and transparent to the community is outstanding. It also lets me know that they care about their products and the end user experience.
@JeremySankey8 ай бұрын
I won't to thank you for your videos. After watching your video on a carrier inspection I was able to figure out why my 300bk and .223 wasn't cycling. (I switch between the two uppers and use the same lower. For now) turned out I had a small pin stuck in the gas key. Once I got it out I had no more issues. Thank you again.
@djinfwb10 ай бұрын
Very informative! Thanks again for taking time to produce these videos!!
@abitofapickle625510 ай бұрын
Chrome and Hard Chrome are the best finishes in my humble opinion. My dad's duty gun was a 1991a1 that was hard Chrome plated and that finish is still going strong.
@bidenisatraitor763310 ай бұрын
Chad..your humbleness is why i think most people trust you.i appreciate all of your time and knowledge you give us. This channel is super educational and has given me confidence. Thank you sir!
@Mjdeben10 ай бұрын
2 videos in one day! You spoil us Chad!
@grosspapa167910 ай бұрын
I just want to say thanks for what you do.
@juniyananajukyu10 ай бұрын
Chad, thank you for being so generous with these videos. You drop so many tidbits of info along the way. I never would've thought of using half a toothpick to hold the bolt catch in when pinning it.
@JJUkraineАй бұрын
Centurion is great. I love their lowers. Really amazing. Great barrels.
@hdub652710 ай бұрын
Just picked up my first centurion barrel, rail , and lower. Excited for this build! Ran with a normal c4 bcg, but if I can find a sand cutter I’m gonna get it!
@user-tn7hc4ww3j10 ай бұрын
Thank you for these informative videos. I've benefited greatly from your content and appreciate your efforts.
@80whitetail9 ай бұрын
Thanks for the review. I am a big believer in Centurion Arms and I am really looking forward to their bolt that I can marry with this carrier.
@aaronyojimbo175310 ай бұрын
Excellent content and subject matter. Thank you.
@tonyc22310 ай бұрын
I have 3 BCM bolts ,all 3 have good finish inside and out. Just bought a colt 20 inch upper with a bolt and charging handle. The quality on the colt upper,barrel and bolt are very good. Using a bore scope on the bolt inside the finish is excellent. I am using this colt 20 inch to replace a 1986 Colt HBAR barrel. I wonder If Chad would like to see what the inside of a 13,000 round old HBAR barrel looks like. Make a nice video.
@mutatedgenome10 ай бұрын
Looks like a great product. I have a couple of the KAC sandcutters but it's nice to know there is an obtainable quality alternative.
@Wolf-uy7px10 ай бұрын
Awesome info Thanks to Tactical toolbox for referring your channel.
@9mmthroatpunch21110 ай бұрын
Theres a knights sand cutter on gun broker right now selling for $1,599.00 🤯
@SchooloftheAmericanRifle10 ай бұрын
That's insane considering these have better screws, better staking, and are more efficient.
@doktorfaustus10 ай бұрын
Maybe I should put mine up there. It's a nice carrier and all, but if someone wants to shell out that kind of cash for it...
@heatherkelley811510 ай бұрын
If I owned a knights sand cutter I would want to sell it after seeing this.
@9mmthroatpunch21110 ай бұрын
@@SchooloftheAmericanRifle exactly and I believe they originally went for $250 even back then $50 more than the centurion so folks I would pick up the centurion while we can for the price
@jorgerodriguez-wv4ul7 ай бұрын
Thank u 4 the videos. I watch and learn.
@GATESisRUSTY10 ай бұрын
I’ve been waiting for this video
@JerrBearTactical10 ай бұрын
Another fantastic video 😉 ... keep them coming, Brother 👍👊🇺🇸
@charlesgillette292510 ай бұрын
Thank You for the education. I enjoy your WORK.
@elbryan910 ай бұрын
This is a treat! I've been waiting for this video ever since I found out about these bcg's.
@mtnbound276410 ай бұрын
those gas block screws are pretty nifty! the retaining pin retainer seems like a solution to a problem that doesnt exist.
@steveninaz957610 ай бұрын
Thank you Sir. Love your vids. Suggestions: I am asked a lot about where and how much to lube. That might be a good little bit of info you can share. I refer a lot to your vids
@ZPOLLAK10 ай бұрын
Would love to see the new KAK BCGs on here.
@ZPOLLAK10 ай бұрын
@@railfanningpoints2.045 they've shown it's not a big deal but would like to see more testing. They also have side venting now.
@billymichaels28898 ай бұрын
Thanks Chad. I love the channel and I just got on the waiting list for one of these awesome carrier groups. Hope to see this soon. Add states that once they’re again available, it’ll be sold as a complete BCG assembly bolt included so I’m guessing $250 or up?
@0177610 ай бұрын
For you to recommend something on video says a lot.Thanks
@boomstick405410 ай бұрын
Geesh, those bolt carriers are machined to very same tolerances. Precision
@abolishtheatfandrepealthen696310 ай бұрын
2 vids, we've been blessed
@skwissgaar_skwigelf_kdz32518 ай бұрын
2 of my colt uppers have Centurion c4 handguards on them , car cut on my 14''.5 , and 12'' on my colt comp 18'' no BS the best hanguards around , so impressed that if i see an upper on GB for 5 bills or less equipped with one ill snap it right up asap ( the colt comp 18 was a 2am impulse buy based on that theory and did not disappoint ) the sand cutters have been sold out for a while though.
@dependablekit550010 ай бұрын
Those are very good looking bcg's all I run are chrome bcg's I gotta say I just might have to pick one of those up!!!! Great video love the information!!!!
@connorburns844710 ай бұрын
Love their barrels. Excited for this
@terryboone333310 ай бұрын
Ive wondered if Centurion arms stuff was any good. Glad to see someone talk about them. Thanks Chad. Was going to buy an upper and lower but was'nt sure about the quality, now i am.
@mattmarkowski90910 ай бұрын
I’ll second them. I have a complete Centurion build from a SOTAR class last year in addition to several home builds as well as their barrel in my MK12. They are about as good as you will find. Just be aware that their upper receivers are thermal fit for barrel installation. I’m not the biggest fan of it for every build but they are still great uppers. Buy their stuff with confidence.
@ryand802410 ай бұрын
Personally, I consider them one of the best for pure durability and ruggedness. Their qc is top notch as well. Buy them with the utmost confidence stranger.
@ryand802410 ай бұрын
Oh and their prices are pretty damn decent all things considered.
@WetWiIIy10 ай бұрын
@@mattmarkowski909 iirc Centurion has ceased doing thermal fit on their newer uppers in the last year or so. Mine wasn't thermal fit.
@muddyhotdog410310 ай бұрын
Id like to see actual dirt/sand tests with a standard vs sandcut bcg. Kinda seems like sandcuts on a closed/tight system like an ar15 carrier would create more points of wear and contact especially as carbon/dirt gets in around them. I picture putting gaps in snow ski's vs one long ski. It's a little different then the sandcuts on an FAL, and the tolerances around the carrier aren't as tight. But kinda a solution to a problem that doesn't exist with an ar15, and maybe even creates areas for ingress in what is a mostly closed system?
@seanoneil27710 ай бұрын
Each individual cut's ledges and groove can be a sediment diverter, but they also serve (each ledge of the groove serves) as an accumulator of debris focused on a finite point -- where the ledge/cut ends. That focus point can potentially increase erosion (BCG to upper receiver bore) but I say "potentially". But what's the reduction in jams/binds resulting from those relief cuts? I can't imagine adding them for visuals/theory alone, it's an expensive addition to the machining work. I expect they actually work as intended despite potential focused erosion points.
@TexasHondaRacing10 ай бұрын
Wow was looking forward to this
@ForceRecon1128 ай бұрын
I would love to see you do a comparison between a 12.5 centurion arms called hammer, forged chrome lined barrel, and one from Hodge Defense. I know you’ve already done a barrel physical for a Hodge Defense, but I’ve never seen you do one for centurion, and I’m looking at both of them for a potential build
@TROY-MCCLURE-199110 ай бұрын
Wish other manufacturers would copy the features of the sand cutter and the dual ejectors.
@TheMusclesMarinara5 ай бұрын
Kak did
@kevincraig640710 ай бұрын
damn i wish i could like this more than once!!
@ed0c5 ай бұрын
MONTHS behind in shipping i’m on the list! hopefully get done soon :)
@campusdan10 ай бұрын
Awesome! Love Centurion Arms, they are so good!
@robertwood627210 ай бұрын
Very good stuff!
@peeeoii273810 ай бұрын
2 in less than a day let’s gooo!!
@ethan5.5610 ай бұрын
KAK just released their dual ejector bolt and sand cut carriers
@andrewryan348610 ай бұрын
If you ever get a chance to do a physical/autopsy video on a 308 pattern of AR, I would love to see thar
@RobR196610 ай бұрын
Always gain great knowledge from your videos! It has been a month since any of your videos have been uploaded to Rumble; will this change or are you sticking to youtube going forward?
@kenabi10 ай бұрын
my only complaint about the centurians chromed bcgs; its just the carrier, i'd prefer it to be the full assembly, so i know its going to work the way it should. and i don't have to try and hunt down a viable bolt, which can sometimes be annoying to accomplish. otherwise; they seem to make good product. and i wish they had more stainless barrel options, but que sera sera.
@allanaurelio348510 ай бұрын
They will be sold as complete BCG’s in the future
@user-ux8fm2rt4b7 ай бұрын
Please review that KAK industry k spec please and thank you. I believe the majority of their products to be over priced hype and I’m curious if they actually make a good carrier
@heatherkelley811510 ай бұрын
I’ve never had the luxury of owning a KAC carrier before but I’ve read comments. What is your opinion on extra wear on the receiver, and or lube issues?
@av8rbri4739 ай бұрын
gorgeous
@onpsxmember10 ай бұрын
Having the choice would you also use a hard chromed bolt and just a nitrated extractor or have both nitrated?
@LTLC10 ай бұрын
Chad, what's your opinion on throwing a chrome BCG in an ultrasonic cleaner? Yay or nay? And if yes, any recommended time+temp (using a 1:1 ratio of regular simple green)? Thank you.
@jamaicanomen5 ай бұрын
Amazing videos, what are your thoughts on the kak industry’s duel extractor, downward vents, sand cutter bcg?
@emersonchattin951210 ай бұрын
Been waiting for this one.
@DanFilkins10 ай бұрын
DS Arms also makes a nice BCG with the sand cuts.
@richardturner627810 ай бұрын
Have you ever done a physical on any products from HM Defense? They have the monobloc barrels and the bolt design where the cam pin doesn't go all the way thru the bolt. Just wondering if they are reliable products? Doesn't seem to be much hype at all with their barrels and bolts.
@pjmunley21169 ай бұрын
How do you feel about Rubber City Armory adjustable gas keys? I'd love a video regarding it. I had a smith put one on an Expo Arms carrier I'll send mine for inspection. Thanks for the content.
@user-md4vb5uh5l10 ай бұрын
Over the years there's been the debate to download mags or not so that they seat when loading. If a loaded mag (fully loaded or not) is giving you problems seating on a closed bolt, is it probably due to the rails on the carrier not being in spec? This would make sense as to the main culprit of that issue.
@ThePatriotParadox10 ай бұрын
Best BCG out as of NOW
@behemothpowersports595810 ай бұрын
Have you ever done an inspection on a Cryptic coatings BCG? I’m pretty sure it’s just a Tool-craft BCG with a special coating that Cryptic applies. I’m curious to see how thick their coatings are and if it has potential impact on performance. I have a few I haven’t used yet and can send you one for your videos if you can send it back. Actually I’m only an hr from you and can drop off as well.
@justahappyfellow10 ай бұрын
Just wondering, what do you think of the Ruger SFAR? From what I understand, its a fairly standard BCG that can take many AR15 parts. Kinda concerned how it will handle 7.62 pressure however..
@matthewbeaver502610 ай бұрын
The 2 gas keys that touched were pre production run. Idk how much weight I put in that. The production 2 looked good.
@MarkiusFox10 ай бұрын
"I love chrome" - Chad SHINY AND CHROME!!
@anthonyjose564410 ай бұрын
So uhhhh can I scoop one of those from ya 😂 also thank you for this review I appreciate this one
@FFFFYOURWOKE9 ай бұрын
Outstanding
@T_bone10 ай бұрын
Question: Can you take a Colt Sporter 9mm from the 1990s that takes SMG mags and change the carrier and magwell guide to take glock mags?
@AF-O610 ай бұрын
Monte’s stuff is hard to beat…just need a health dose of patients due to the demand.
@KeepTheGates10 ай бұрын
I'll definitely be picking a few of these up once they start releasing with bolts. I was planning on purchasing prior to seeing this video, but if anything I'm more confident in the quality of these carriers now. I would be genuinely surprised if the bolts left anything to be desired.
@joeyassyrian10 ай бұрын
Never understood the concept of defeating the sealed system properties of an AR and putting more ingress points for sand and debris to enter lol. I don't think there is even any documentation for the origination of these bolts in terms of user request (not for CMT but for KAC). They probably saw the FAL and were like "we can milk this from all the instagram warriors," and now they sell on the used market for $1000 LOL.
@hannibalbarca293910 ай бұрын
To be fair, I had the same concern and bought one anyways. $180 isn’t KAC money.
@joeyassyrian10 ай бұрын
@@hannibalbarca2939 It's definitely not a bad price, I could be wrong with my assessment and it doesn't hurt to try it out. I personally prefer the added benefits of the LMT enhanced carrier which is around the same price, they have rails on the side to help with debris. I would much prefer this finish though and the LMT doesn't run in every gas system and barrel length..
@hannibalbarca293910 ай бұрын
@@joeyassyrian I'm looking forward to testing my LMT enhanced soon. I wonder if you will be proven right in the long run. It's definitely possible, but most of us aren;t going shooting during dust storms or severe storms/blizzards.
@SchooloftheAmericanRifle10 ай бұрын
Per my testing, sand cuts do not significantly unseal the system if the weapon is lubricated properly (which is generous).
@joeyassyrian10 ай бұрын
@@SchooloftheAmericanRifle So does it make contact with debris? And in the event it does, what exactly does it do? Because if it doesn't make contact with debris, then it isn't really doing anything.
@nicholasgeremino844220 күн бұрын
Hello I watch & Learn alot from your Show I saw your Physical on the Centurion Arms Sand cut Carriers I actually purchased One I run it with a Colt Bolt Do you have any Idear when The Bolts for these carriers will be Available I sent a few emails to centurion but haven't heard back from them I'm hoping they will be available soon so I could purchase them.
@PnP-td1mt10 ай бұрын
I have a SOLGW BCG that will not hold its weight up when standing the BCG up on the bolt face. The gas rings measure 12.70mm where new rings measure 13.0mm.. both off the bolt. What are your thoughts on this?
@ArgosySpecOps10 ай бұрын
2:05 I ordered two early on, and one came with the hole & the other without.
@boomstick405410 ай бұрын
I subscribed long ago, but I never get videos in my feed. Had to find a video post to gripe about it.
@alexdrockhound949710 ай бұрын
I notice you have a bottle of loctite and vibratite. What situations do you use each one?
@stoneass10 ай бұрын
A thorough probing as usual.
@beasthayabusa199910 ай бұрын
Gotta get me one of these
@brentphillips467410 ай бұрын
Where do you typically purchase your tools from?
@ethanbarnes39739 ай бұрын
What do you think about the mew titanium BCG's from walker defence. Are they better than carpenter steel? Thanks!
@gob711610 ай бұрын
So, price being equal, this or kac? And would you pick this over a rebcg, surefire and other non milspec gucci bcgs?
@MrRhsmike18910 ай бұрын
Are you offering this service for individuals to send there in? I thought I saw a video a while back but don't see it listed on your site?
@bruehlt10 ай бұрын
What bolts do they plan on using? I've bought quite a few BCG's that the bolts don't pass the specs - the cam pin holes are too large, and the bolt tail is not to spec.
@Matt-dd3cw10 ай бұрын
I use a Colt bolt with mine, it functions and seems to gauge out nicely, MPI HP tested. The bolt carrier is a work of art.
@billynomates92010 ай бұрын
i hope they do include a firing pin retaining pin retaining pin
@boomstick405410 ай бұрын
If you could only upgrade 1 part on a factory assembled box AR-15, I would say the bolt carrier should be that 1 part.
@RandomNylonGuy10 ай бұрын
Will these accelerate the wear on the inside wall of the upper?
@tarbo187Ай бұрын
How do these compare to the KAC sandcutter and would this be a worthwhile investment for my End of the world rifle ?
@rockerdude800010 ай бұрын
I like captive fireing pin retaining pins. I hope they keep it on the design
@robertfoote325510 ай бұрын
Rated at..... 😃😃😃😃😃 Five Smiles!!!
@Cry4daking10 ай бұрын
I’m just getting into gun smithing and I am learning how to diagnose issues. I found light flakes of brass in an ar bolt after removing the extractor. Does anyone have any useful information?