CFD Simulation of a Tesla Valve in OpenFOAM

No video

CFD Simulation of a Tesla Valve in OpenFOAM | OpenFOAM tutorial 2

Рет қаралды 20,082

3 жыл бұрын

Consider supporting me on Patreon: / interfluo
In this video I demonstrate how to perform a cfd analysis of a tesla valve using openfoam. I show all of the steps from creating the geometry to post processing along.
I hope you enjoy
geometry from grabcad: grabcad.com/li...
project files: github.com/Int...

Пікірлер: 31

@sharemarketkoninja6929 2 жыл бұрын

Thanks for openfoam tuttorials. After two days to tuttorials watching, i am slowly being accustomed to openfoam.

@interfluo6420 2 жыл бұрын

keep going! it becomes way more intuitive the more you do it

@treadless_co Жыл бұрын

Great video, thanks. Just a few notes for anyone trying this: 1. ansys mesh export does not keep letter capitalization in the named selections. However, openfoam requires exact naming (cap matters) 2. Ansys no longer supports designModeler. The geometry MUST be opened in SpaceClaim first. Once this is complete, change the properties in your mesh object (e.g. A2): Advanced Geometry Options>Analysis Type>2D. Otherwise, the .msh file will be interpreted as 3D.

@erockromulan9329 6 ай бұрын

I can still use Design Modeler in Ansys and it works.

@User-Tal1951 2 жыл бұрын

Great video. I like your teaching style and and the music

@user-hs3dg8jy3t 3 жыл бұрын

Really awesome !

@nikola.tesla.r.and.d.centre 24 күн бұрын

New subscriber here. Can we discuss a new test of the valve in open foam but with the valve installed in the pulse detonation chamber it was designed for that has a pulsed pressure higher that atmospheric? I’ve never seen the simulation being ran in the proper format for use of the invention. It will yield very different results!

@seancollins5769 3 жыл бұрын

I always assumed ParaView was strictly a post-processer (i have never correctly used it). Looks like you are adjusting boundary conditions after pre-processing in Paraview though? Thanks so much for showing these videos!

@interfluo6420 3 жыл бұрын

I am not adjusting the boundary conditions in paraview, but just making sure that they have been translated to openfoam correctly. All of the adjustments are still happening strictly in openfoam

@Darkkenfox 2 жыл бұрын

Incredible video. Awesome!!!

@interfluo6420 2 жыл бұрын

Thanks a lot!

@christoselpidoforou7717 9 ай бұрын

Please help. why do i get: zsh: command not found: explorer.exe . zsh: command not found: fluentMeshToFoam How can i resolve this?

@ADITYAVERMA-gi2wf 2 жыл бұрын

which fluid is used in flow simulation?

@miiortbiiort4610 3 жыл бұрын

Great video! I ran the case file and it worked great :). I was wondering, could you also interpolate the results to further smooth out the simulation or do you have to run the simulation again using a smaller deltaT?

@interfluo6420 3 жыл бұрын

I think that because the simulation is viscous and transient (parabolic) the solution should have no discontinuities in time or space, so you are probably fine interpolating. If you want finer results I would recommend refining the mesh and running with smaller timesteps (to maintain the courant number between 0 to 1).

@interfluo6420 3 жыл бұрын

Hope this helps!

@miiortbiiort4610 3 жыл бұрын

@@interfluo6420 Hey, I tried using the 'Filters -> Temporal Interpolator' tool in paraview, which worked out great and looks really cool! :) Thanks again for the tutorial and case file :D

@369Eletricidade 3 жыл бұрын

Como engenheiro elétrico, Nikola Tesla inventou está válvula para usar com fluidos, mas ao lê sua patente podemos perceber que está válvula é um dispositivo elétrico é uma peça para ser usada como parte de outro dispositivo, seu funcionamento asemelha se a um diodo onde a corrente elétrica passa por um lado e não volta, fiz a tradução e leitura desta patente e postei é interessante...

@interfluo6420 3 жыл бұрын

si, perdón no hablo portugues pero si te entiendo estas diciendo que el concepto usado en esta válvula se puede aplicar a corrientes eléctricas. Me acuerdo leer esto y me parece una idea muy interesante, alomejor lo puede intentar simular algún ingeniero eléctrico como tu.

@fblua 2 жыл бұрын

You didn't give the results? Pressure fall, diferente speeds, etc. How we would compete efficient with other geometries, devices, tubing restrictions, etc.

@interfluo6420 2 жыл бұрын

this video, like all of my early ones, was a tutorial and not a case study; the goal therefore was to show the minimal necessary steps to run a simulation with the goal that people could build off of that. My later videos are more in the format of case studies where I focus less on how to run the case and more on the IO/results.

@fblua 2 жыл бұрын

@@interfluo6420 *Then, my regret dear colleague. I am sure you will generate knowledge with further studies. I am sorry and I graceful because your effort.*

@denghongzhou3785 3 жыл бұрын

Thanks for sharing. What is "s" file in the zero folder and how is this one applied? Thank you.

@interfluo6420 3 жыл бұрын

s is what is known as a passive scalar, I like to think of it as injecting dye into the flow so that you can see the path it is taking, vortices, etc... It doesn't affect the fluid flow at all but is just there for analyzing the results

@Antony-bq5uc Жыл бұрын

Can you attach a the mesh for reverse direction. I tried out the code, but I do not have ansys to change the inlet and outlet. Or is there a way to change the inlet and outlet without re-meshing?

@samuelsisk2638 29 күн бұрын

For your boundary conditions, you can just switch the inlet and outlet

@mariomontejo3889 2 жыл бұрын

Muy buen video, muchas gracias por el contenido me ha ayudado muchisimo!! Por otro lado quisiera pedir tu ayuda, soy principiante en OpenFOAM, y estoy tratando de importar mi mallado al software pero OpenFOam o Ubuntu no pueden abrir el archvio (soy usuario de Windows y estoy usando la extension WSL). Mi sistema no me permite crear carpetas nuevas en el apartado de tutoriales o LES, pues no puedo proveer los permisos necesario, podrías ayudarme porfavor? desde ya muy agradecido!!!!

@interfluo6420 2 жыл бұрын

Otra persona tenía la misma pregunta y, lamentablemente, no tengo una respuesta. Seguí este video al instalar openfoam, tal vez te ayude: kzfaq.info/get/bejne/mbuSdpN-19HNf3U.html

@cleisonarmandomanriqueagui9176 2 жыл бұрын

Can I use the meshers from openfoam libraries instead of ANSYS ?

@interfluo6420 2 жыл бұрын

of course, I have some videos for the other meshers that you can adapt for your case: blockMesh: kzfaq.info/get/bejne/rqmaqLl0pszYfYk.html cfMesh: kzfaq.info/get/bejne/m5h-YMthysW3nYE.html snappyHexMesh: kzfaq.info/get/bejne/a7l9oMqUtJvccas.html

@cleisonarmandomanriqueagui7502 2 жыл бұрын

@@interfluo6420 thanks for your reply