CFMOTO Valve Adjustment is it necessary at first service
Рет қаралды 13,128
5 ай бұрынHey there, gearheads! Today, we're diving into the world of maintenance for our beloved CFMOTO vehicles. Now, let's face it - these babies are our pride and joy, and we want them to run smoothly for years to come. That's why valve maintenance is crucial.
Now, you might be wondering, "How often should I check my valves?" Well, that varies from vehicle to vehicle. Depending on your model and mileage, you might want to pop the hood every 1000 miles or so. This is a quick and simple task that can save you a lot of headaches down the road.
So why all the fuss about valves? They play a crucial role in your engine's performance. A small issue with them can lead to a whole host of problems down the road. By ensuring your valves are in spec and running smoothly, you're not only prolonging the life of your engine but also enhancing its overall performance. And who doesn't want their CFMOTO purring like a kitten?
So next time you're Doing maintenance, don't forget to give those valves some TLC! They may be small, but they make a big difference in keeping your CFMOTO running smoothly.
Thanks for tuning in today, folks! If you found this video helpful, don't forget to hit that like button and subscribe for more tips. Until next time, keep those engines running smoothly!
for all of your CFMOTO needs check out www.rngperformance.net
Join this channel to get access to perks:
/ @r.n.gperformance
#CFMOTO #CFMOTOUSA #RedNeckGarage
Thank you for all of your support we hope to keep bringing you more content and we hope to get better and better.
PLEASE LIKE, SHARE, SUBSCRIBE and CLICK THAT BELL!!!
Here is how you can support us.
/ redneckgarage
If you would like to donate to the channel feel free to PayPal me AT stephenhayes1988@gmail.com OR
paypal.me/RedNeckGarage1988
Want to Buy our Clothing?
teespring.com/stores/redneck-...
My Amazon store ATV/UTV Parts and accessories Tools and much more! check them out.
www.amazon.com/shop/influence...
@jreed10291974 5 ай бұрын
My dealer said don't bother with it till 2000 miles and said doing my own service wont void the warranty. I have always done that stuff myself. Great job on the video's you have turned into a professional.
@Saskatchewan1984 5 ай бұрын
Lol me being a tech myself for different brand , my dealer for cf moto told me they had to do the valve adjustment for warranty and I said bs , but I played along took it , little did they know I covered the bolts with heat tape , when they were done I inspected , and my tape was still there , needles to say I got a free service and valve adjustment out of it when I was done with the service manager lol
@R.N.GPerformance 5 ай бұрын
Allot of crooks out there my friend. Makes you wonder how many people have been taken by these crooks.
@nickridesbikes. 5 ай бұрын
Let's just hope they did the valve adjustment correctly after getting busted 😅
@bullionbouncer5080 5 ай бұрын
They said the same, that my warranty would be voided if the valve adjustment wasn't documented, and I wasn't paying almost $800 for the valve adjustment/check they wants over $1k for the fluids and the valve check. Eff that. Warranty voided and traded the machine.
@bigjay6743 4 ай бұрын
I've checked valves 2 times since 2021 once on 20 hours 320km and again at 1350km been on the money both times. We have 5 year warranty here in Canada so probably void said warranty since I did it myself but did video doing it gust incase. Dealer really tried ripping me off when buying it almost walked away but sold both my other wheelers that morning to help pay for new bike and needed it for trip the next day. Been a good machine only problems I've had have been Reverse lights have never worked And winch solenoid just failed not long ago.
@andrewparis8741 2 ай бұрын
@@bigjay6743Did it void your warranty? I was told you could do it yourself as long as it was documented. I'm also in Canada. Is the valve adjustment on a uforce XL easy to do with the engine in the machine? This video is great but the engine is out of the machine. I am at 20 hrs now and this is supposed to be done.
@larryisaacs4075 5 ай бұрын
Damn Red Neck, you are talking like a real professional. The videos are looking very crisp, you are doing a great job. Good Luck and may GOD bless.
@R.N.GPerformance 5 ай бұрын
Thank you 🙏
@opie7afe 3 ай бұрын
Perfect timing, was going to do mine at 500+ miles..yeah i really dont want to take 75% of the plastics off so i think ill wait a bit and just do the diff fluids.
@Gokywildcats11 5 ай бұрын
Thanks for your honesty
@R.N.GPerformance 5 ай бұрын
Your welcome 🙏
@FANATICALSIDERIDER 5 ай бұрын
Awesome video Steve, you explained it so clear and easy. Thanks for the tutorial 🛻😊
@R.N.GPerformance 5 ай бұрын
Your very welcome 🙏 thank you 😊
@dustytrailswithepa 5 ай бұрын
Great Video . I know what you mean , I had to adjust my 2021 at 200 miles , slightly out of spec. My Daughters 2022 we just going to change the fluids it sounds & runs Great so it don’t need all that. Keep up the good videos
@drdaledobek9882 5 ай бұрын
My 800xc had been adjusted twice both times they said a couple valves where tight...first time at 300 km second at 2500 km . Being told to baby it at break in with amsoil in it will produce a slow break in period I believe.
@rcclassiccrawlers4368 5 ай бұрын
I checked my own at 200 miles. They were set perfect. No need to adjust. I’ve got slightly over 1500 miles now and it runs perfect. If I notice it run differently or hear some clattering I’ll definitely go in and check everything out and adjust if necessary.
@patricklambert5810 5 ай бұрын
Good stuff!🎉
@R.N.GPerformance 5 ай бұрын
Thank you 🙏
@eminimdood 2 ай бұрын
Where are you from my friend. I havent purchased a cf moto z force yet but i enjoy your honesty every single video.
@timleinart1645 5 ай бұрын
GREAT VID! Even an average non- shade tree mechanic like myself can do this! ( Just have to get through the plastic jungle and breaking tabs thing ). High quality presentation Steve! Thank you!🙌
@R.N.GPerformance 5 ай бұрын
Your very welcome 🙏 that’s why we do what we do to help you guys save $$$$$
@OpenAirAdventure 5 ай бұрын
I did mine early. They were fine. Might do them again sometime. Right now it sounds great, starts great and works great. Almost 2000 miles.
@R.N.GPerformance 5 ай бұрын
Good to hear for sure.
@jeffreyseverson1623 5 ай бұрын
Thanks for this one. I just bought mine new, but will never go back to my local dealer. This was the one break in item, that I wasn't sure about doing myself.
@R.N.GPerformance 5 ай бұрын
Your very welcome 🙏
@Figuereditout 2 ай бұрын
Finally some truth here. Great info!
@R.N.GPerformance 2 ай бұрын
Thank you 🙏
@gleedsiii 5 ай бұрын
love the videos, keep up the good work. Now you need to start hooking guys up with some tunner info cause those dudes down in Mississippi selling tunes are a Joke.
@R.N.GPerformance 5 ай бұрын
Stay tuned. We will. I agree with you 💯 them clowns only want your money. We catch them in marketing lies all the time.
@Regularguy5 Ай бұрын
On the measurements…. Did you mean exhaust between .006mm and .011 and .009mm? All I can find is .006-.009 and nothing for .09 or .06mm. Thanks for the video. It helps a lot!
@43dukedog 5 ай бұрын
My dealer said they don’t do it at break in he said if it ain’t broke don’t try to fix it might make it worse
@joedemaio8493 4 ай бұрын
Red. I just took my cover off. Maybe a silly ? But. The machine have to b in park? I have it in neutral. So the line is on the top an I can't even get a gauge to slide in there. Friggin awful. Glad I checked it
@gillesbrassard7826 5 ай бұрын
I can find the feeler gauge .08mm no problem but the .113 i cant find. You have the .127mm that = to .004 of an inch but .113mm = to .0044 of an inch.
@bigjay6743 4 ай бұрын
I've checked the valves 2 times since 2021And both times they've been dead on.
@FOGELL_TheGreat Ай бұрын
To bar over the engine do you just take that round side cover off on the passenger side ?
@bunasir394 2 сағат бұрын
Hi friend I want to ask that mine 1000 Zforce I see one slender head (front side) exhaust pipe it’s glow red but the other slender exhaust it’s fine no red does do I need valve adjustment or there some other reason really i worry about that I appreciate you thanks
@AaronMT09 4 ай бұрын
thanks for the video!! my dealer wants to charge 250 to do this on my papio. Do you know what the papio is to be set at?
@R.N.GPerformance 4 ай бұрын
I don’t my friend I’m sorry. Your welcome 🙏
@mikes2607 3 ай бұрын
So which video should I go by? You have another video showing to turn the engine until one side is completely compressed and the other side completely relaxed. If I line the mark up with the head, I can’t get a feeler under any of them.
@R.N.GPerformance 3 ай бұрын
Either one. You just want to make sure the lifter is in the back side of the cam.
@mrwhamisrick 5 ай бұрын
Anything that needs valve adjustments at those intervals had a design problem.
@R.N.GPerformance 5 ай бұрын
I agree 💯 💯
@bigjay6743 4 ай бұрын
Exactly they don't.
@peterstarch8672 4 ай бұрын
Would the clearances for my 2015 800 ex be the same as those mentioned in your video? Im struggling to find anything specific. Thanks in advance.
@R.N.GPerformance 4 ай бұрын
If memory serves me correctly yes.
@gamepassgamer3755 5 ай бұрын
Just curious what is your opinion on warmup time? I usuallu wait for the temp light to get a notch before i move
@R.N.GPerformance 5 ай бұрын
15-20 mins
@gamepassgamer3755 5 ай бұрын
@@R.N.GPerformance gotcha! Thanks for answering 🤟
@curt8928 5 ай бұрын
on my cforce 500 and zforce 800 trail can this be done with the engine in the machine? never done this before on anything new to it
@R.N.GPerformance 5 ай бұрын
Yeah
@joedemaio8493 5 ай бұрын
Red. I have a 2022 950 ho sport. Taking the cargo rack off is kicking my butt. Lol. Is there hidden screws under it??
@R.N.GPerformance 5 ай бұрын
Last one I worked on I said hell with it. It was such a pain 😂
@joedemaio8493 5 ай бұрын
An I'm pretty handy. Idk. Anyways. How's the turbo coming along in the uforce?? Well I hope u r getting a kit together to sell. I'm in 100%
@bullionbouncer5080 5 ай бұрын
I believe there is something like 10 or 12 Allen heads that are keeping the rack on the mounts, then it's a pain in the ass to get the 100k clips out and keep track of them all.
@michaelmessin5307 22 күн бұрын
Does the engine need to be removed?
@R.N.GPerformance 22 күн бұрын
No
@Gokywildcats11 5 ай бұрын
Cam u do this with motor on equipment
@R.N.GPerformance 5 ай бұрын
Yes
@aaroncolefilms8493 5 ай бұрын
Thank you! Thank you! Thank you! I appreciate your knowledge especially when I don’t want to take my machine back to the dealer that’s 2.5 hours away. Feeling 100% confident to do this service myself now.
@billymartin1874 5 ай бұрын
I need a promo code! Hook a new customer up dawg!
@R.N.GPerformance 5 ай бұрын
No promo codes right now. This is our busiest time of year we can’t keep up as it is. If we put promo codes out we will be so far behind 😂. That and we already have the absolute best prices.
Khabar SPORT
Рет қаралды 368 М.