No video
Chambering a Military Mauser Action, Building a Custom Mauser - Turnbull Custom Guns
Рет қаралды 2,367
2 ай бұрынIn this Video in our continuing series on building a custom Mauser Action, we go over the basics of headspace, and finish reaming a Short-chambered barrel. Then reassemble the barrel to the action. Don't miss this one it has some original artwork by Don! And features Olly our English Sheppard at the end!
@mikerobinson6606 2 ай бұрын
Another good one. Thanks.
@Turnbullcustomguns 2 ай бұрын
You bet
@davidcarter8457 2 ай бұрын
Good technique. I don’t use a floating holder because I prefer to feel the reamer as it’s cutting. Also have switched from Do-Drill to BoLube. The finished chamber cast is measuring more consistently to the reamer. Usually dead on. Years ago a highly skilled machinist told me that if you can hold the hole to within .001” of the reamer you were doing good. I’ve always been within .0005”. I think the BoLube reduces the tendency to work harden the surface. Threading is improved as well. Thanks for sharing.
@Turnbullcustomguns 2 ай бұрын
I'll have to try some of that lube. Thanks for sharing as well.
@Dwyer88 2 ай бұрын
Always enjoy the videos! Been watching this series love it
@Turnbullcustomguns 2 ай бұрын
Thanks, I need all the views I can get :)
@Kindnessmatters2 2 ай бұрын
First! ❤
@Turnbullcustomguns 2 ай бұрын
Good Job
@vettepicking 2 ай бұрын
You didnt indicate the barrels bore? You used a 60deg shopmade center and indicated off a chamfer angle on the end of the chamber? Thats bad practice
@Turnbullcustomguns 2 ай бұрын
Thanks for watching, unfortunately not everything makes it into the video or gets recorded since I'm a bit of a one man show with the production of these video's. When the chamber was shortened the original chamfer was removed and the barrel was reindicated to the chamber not the chamfer. Since my customer already ordered a short-chambered barrel it was not reasonably possible to indicate the chamber end to the bore. The floating reamer head will have to do it's job and allow the reamer to properly follow the bore for the remain .065 that was left to chamber. As to the shop-made Center, just because something is "shop made""it doesn't mean it can't hold tolerance or be quality built. This one was actually made at college 20+ years ago and has served me well ever since. Thanks for watching!
Turnbull Custom Guns
Рет қаралды 2,7 М.
Turnbull Custom Guns
Рет қаралды 1,1 М.
Turnbull Custom Guns
Рет қаралды 1,9 М.
Dustin Drews
Рет қаралды 3,8 М.
Turnbull Custom Guns
Рет қаралды 1,1 М.