chandelier ikea ps 2014 open box and installation Lustre ikea ps 2014 ouverture de boîte et installation #chandelier #ikea #ps2014 #openbox #installation
Пікірлер: 103
@postedup15853 жыл бұрын
Cool light but if they would of just made the base with a bracket on it to screw to the ceiling this light install would be a piece of cake but you have to be a fucking scientist just to finish this light job .
@somerset30782 жыл бұрын
Perfecto, quedo como en mi casa, todos los cables al aire!
@oxyfee64863 жыл бұрын
As a half ass handy man,let me say this light is really cool.That being said it is a piece of shit and IKEA should be ashamed of themselves for not rectifying it’s issues,we are returning ours immediately.How hard would it of been to put ears on the mounting plate to screw the cover into.Plus i have never bought a light fixture that doesn’t come with mounting hardware.
@leosr. Жыл бұрын
I bought one over a year ago and just decided to put it up. The rope does not anchor flush to the ceiling cover. I figured something was missing, returning tomorrow.
@johnwarner38093 жыл бұрын
What ever you do dont follow this video,he does not point out that you need a srew in hook in a joist to hang the light on which is dangerous, if you dont have it the light will come down with one pull.
@healthybeans3161 Жыл бұрын
I bought this 4 years ago and never opened the box yet but im bringing it back cause this looks like a fkn nightmare
@_GalKestis_ Жыл бұрын
Once you get the bs out of the way it was really easy to set up!
@healthybeans3161 Жыл бұрын
@@_GalKestis_ i call my landlord, i deal with enough BS
@timo81britt844 жыл бұрын
A very helpful and nice video . Thank you .
@th3blogger4 жыл бұрын
You're welcome.. thanks for working
@m4h4bb4t6 жыл бұрын
Thank you so much for the help!👍
@christopherjuneman34754 жыл бұрын
I watched this video to see how to get the cover to stay flush with the ceiling, and you just left it dangling at the end 🤦🏼♂️
@gemmacollins22043 жыл бұрын
I have the same problem how did u fix it to roof in the end?
@sureshgaikwad46873 жыл бұрын
Same problem here, could someone offer the solution.
@jamespratt24653 жыл бұрын
I know is so annoying....plus the weight is all on the wire so when you pull it, it will pull away from the top cone and cables...!!
@patsonu7742 жыл бұрын
@@jamespratt2465 The weight should not be on the wire....there should be a hook on the ceiling
@patsonu7742 жыл бұрын
@@gemmacollins2204 very difficult to get it flush with the ceiling...unfortunately
@drewkilpatrick33025 жыл бұрын
Guys, get rid of the dome and use a standard ceiling Rose but don’t allow the live neutral wires to take the weight. Use a cable gripper and attach it to the actual white cable and then to the ceiling Rose. Silly design.
@UnfilteredLifeStuff4 жыл бұрын
Drew Kilpatrick this works cheers dude. The video needed more detail sorry!
@zackcolby26744 жыл бұрын
Drew Kilpatrick what is a ceiling rose and how do you do it??
@sonrobin62783 жыл бұрын
A,,, s,,,,,,?
@adamkozlowski1980ify3 жыл бұрын
100% agree..:)
@guerojoper46663 жыл бұрын
Y You're the man!
@meziii6 жыл бұрын
Thanks
@supermegatallica18 ай бұрын
Omg im doing this in 3 hours with celing part and its frustrated!
@JamesLewis0074 жыл бұрын
By the end you still have exposed wires!
@turbogeek.421 Жыл бұрын
We all just ignoring that the top is not flush against the ceiling at the end?
@9ernie9 Жыл бұрын
I noticed that. A different video (by Leo Chaplin) suggested using a white cable tie around the cord so the top remains close to the ceiling. But it would be better if there were small plastic brackets screwed to the ceiling and screws near the top edge of the plastic "cup".
@patsonu7742 жыл бұрын
THANK YOU ❤
@th3blogger2 жыл бұрын
You're welcome.. 👍
@Benny100016 жыл бұрын
Shaky camera, and hand covering what ur actually doing. I’m more confused than when I looked it up. Thanks a lot.
@JexxiMae4 жыл бұрын
😂😂😂😂
@belalmansour14502 жыл бұрын
Pov: the dislike button is removed
@meesie1203 жыл бұрын
Bedankt voor de hulp! Leuk muziekje ook!
@th3blogger3 жыл бұрын
Thanks for watching.. please don't forget to subscribe
@meziii6 жыл бұрын
very good :-)
@alextrevelian2 жыл бұрын
Am I stupid? Is the plastic done supposed to be left holding to the ceiling by mere force of faith?
@kuriabraham6 ай бұрын
The weight of the fitting is taken by the dome which you fix as close to the ceiling as possible. Then the circular lip of the dome holds the fitting in place, by bracing against the ceiling which does not allow it to move.
@marzannag8187 Жыл бұрын
Thank you ❤
@th3blogger Жыл бұрын
You're welcome, thanks for watching 👍
@nuranrahman61855 жыл бұрын
I’ve fixed the wing parts wrong, how to fix it please help
@anmolmalik114 күн бұрын
thank you
@MT-qg7ev2 жыл бұрын
Which light bulb is this?
@diazartmovement3 жыл бұрын
No screws come with any of the Ikea light fixtures!!
@Takiry4 жыл бұрын
Nicht auf die Klemme drücken beim Kabel einstecken. nur dann kann die Klemme richtig halten. Drückt man drauf liegt das Kabel nicht perfekt in der Klemme und kann rausrutschen und einen Kurzschluss verursachen! Desweiteren sind die Löcher an der Deckenhalterung nicht für die Kabel in der Decke sondern für die Lampe um die Kraft besser an den Haken zu geben wenn man dran zieht sonst kommt jedesmal die Lampe weiter runter... so wie im Video... Echt blöd sowas zu zeigen...
@Dareball2 жыл бұрын
Waw
@maker_kutz20 күн бұрын
The whole weight if this light is holding on by the wires 😂 you need to put a hook in ceiling
@mrmikepreacher6 жыл бұрын
Hi I have the 52cm, the bigger one with 2 springs, I can't figure out how to get the mechanism to work, the ropes are not controlling the base of the mechanism, tried to untie it that doesn't work, I may be doing something wrong
@zer00rdie6 жыл бұрын
Read the manual.
@modjo275 жыл бұрын
The manual is pretty useless
@zer00rdie5 жыл бұрын
Considering it tells you nothing about the ropes, basic logic dictates that you don't have to worry about them. Asemble the arms and the mechanism works, ezpz
@javiermontenegro40855 жыл бұрын
Mike Billions i’’ having the same problem, how did you fix it?
@GAVROS365 жыл бұрын
Javier Montenegro I had the same problem you actually have to put it together the springs work when it’s built it took me ages
@claudiallimos31086 жыл бұрын
Minuto 4:55 ami no se me engancha en el techo, se me cae como lo has echo
@MarteTheBest2 жыл бұрын
I just built this lamp but the mechanism seems to be broken... It closes but, everytime I try to open it, it just won't stay in position. What can I do? Thanks
@th3blogger2 жыл бұрын
you can remove the system without unplugging the lamp, and check the system quietly
@zebedee1235 жыл бұрын
Cannot see what is going on a 2.00 probably the most important part. How does it attach to existing wire???!!
@LamazStylokaKOB5 жыл бұрын
I couldn't agree more..
@leewatson65574 жыл бұрын
I hate IKEA!!!
@user-bk3nh4ek8d4 жыл бұрын
This doesn’t really tell me anything
@OKAYIMTURNT Жыл бұрын
La lumière Suisse, merci ma star
@anagomez63832 жыл бұрын
Hola a todos me gustaria saber como se puede limpiar la lámpara una vez montada se acumula mucho polvo y no se como limpiarla gracias
@angelesazules34046 ай бұрын
Can you make a video how to disassemble the parts of this lamp? PLEASE🙏...I want to keep it because I'm moving house.
@th3blogger6 ай бұрын
I'm so sorry, I just disassembly it a few weeks ago, i want to assembly a new one. but i will try to do it as soon as possible
@angelesazules34046 ай бұрын
@@th3blogger ok.... I will wait anxiously for it. greetings🤗
@tanvishah47163 жыл бұрын
Does anyone know how to disassemble this if wrongly fitted? I cant remove the pieces once fixed them in
@shakiromar1425 Жыл бұрын
me too, any luck?
@luvgiux3127 Жыл бұрын
@@shakiromar1425 i just did it now and you can remove them but it's really really hard, you have to be strong but at the same time try to not broke it lol
@scarletb793 жыл бұрын
What bulb did you use?
@aaronletchford2 жыл бұрын
E27
@scarletb792 жыл бұрын
@@aaronletchford Thank you.
@aaronletchford2 жыл бұрын
Your welcome 😊
@paullester37469 ай бұрын
So basically you can't have any wire hanging down like it supposed to be it has to be flush against the ceiling
@kuriabraham6 ай бұрын
No you can. You can adjust the wire to the length you want and then lock it with the lock fitting inside the cone.
@sharonroberts59572 жыл бұрын
My issue is how do you change the light blub....
@th3blogger2 жыл бұрын
try to insert your hand with a small light bulb
@user-is8hr6by2q2 жыл бұрын
4:53 долбаный колдун! Мы полчаса с этим мучаемся!!
@pujalrana68938 ай бұрын
does anyone knows how to turn white light yellow and vice versa
@kalebwesterman86303 жыл бұрын
Terrible camera work, doesn't even finish setup, and an ad every 30 seconds
@benschwarzii25793 жыл бұрын
Je trouve qu'elle est très facile à monter, mais qu'elle M... pour enlever les lames quelqu'un aurait la solution ?
@gloriarubiano31344 жыл бұрын
He comprado una y no me sujeta el plafón colgante quien me aconseja como ponerla gracias
@th3blogger4 жыл бұрын
If the roof is rigid, fix it with a drill
@gloriarubiano31344 жыл бұрын
Es donde van los cables no me encaja a la pared ayudaaa
@t-19873 жыл бұрын
パーツの取り外しができなくて泣く泣く壊した
@paolo92666 жыл бұрын
Une vraie merde cette lampe, impossible de fixer la coque au plafond, ou alors il faut la coller ???
@ilhemeben10855 жыл бұрын
Paolo L'hippocampe englué dans les frénésies obscures avez vous trouvez une solution ??? Cela fait plus de 3h que je suis dessus !! Merci d’avance
@nickjudd623 ай бұрын
It’s frustrating enough trying to install this light - the unnecessary music isn’t helping (yes, I know I can switch it off)
@martaj24736 жыл бұрын
hola! La parte de las cuerdas no haces nada Es que a mi no se me mueven...
@th3blogger6 жыл бұрын
Which one? At what minute?
@richardmuller91792 жыл бұрын
worst design ever for attaching to the ceiling
@chrisnicholson336310 ай бұрын
Your not exactly going to jump up and hold the wires while u pule the cords 😅😅😅
@alinaa89493 жыл бұрын
viel zu viel werbung
@chrisdukes910510 ай бұрын
This makes my head hurt, I've never seen such a botch job in my life before 🤯