Change 2005 Dodge Dakota Spark Plugs (V-6)

Рет қаралды 57,286

6 жыл бұрын

I change, step-by-step, the spark plugs on my 2005 Dodge Dakots V-6. You will require a torque wrench, several extensions, a spark plug socket, new spark plugs, a 10 mm socket, anti-seize lubricant, a spark plug gapping tool, and time.
All in all, this took me about 45 minutes.
If this video was helpful, feel free to 'like' this video, leave positive feedback and subscribe to my channel!
(This used to be on a different YT channel but I am consolidating my videos. )

Пікірлер: 26

@andrewconlow5627 6 жыл бұрын

Thank you sir! Very nice video! I change my plugs when the engine is cold, (aluminum block could seize the plug, snapping the plug when it's hot) I also put a dab of copper anit-seize on the threads. They will go in easier with little risk of cross threading.The next time you change them, the plugs will come out easier as well. I use the coper anti-seize due to its high temperature tolerance. p.s., I use them on the brake bracket as well... Again, thank you for sharing!

@Briggs22 5 жыл бұрын

Thanks. I have an 04 Dakota with the same motor and I’ll be doing my plugs soon. And I don’t have a tourqe wrench so I’ll be using a regular ratchet

@realsuddenlike6046 5 жыл бұрын

Yeah, it's not ideal, but for years (and years) I've changed plugs without the torque wrench. A little anti-seize would probably be a really good plan since you could over-tighten them.

@Hidingfrompeople 6 жыл бұрын

Don't use your torque wrench for loosening nuts or bolts.

@realsuddenlike6046 6 жыл бұрын

I've since learned this lesson. :) Thanks for the good commentary.

@jacobjordan2732 6 жыл бұрын

Thanks for the video

@patrickhawkinson8399 5 жыл бұрын

If someone needs a lesson on how to open the hood, probably shouldn't be attempting to change plugs.

@realsuddenlike6046 5 жыл бұрын

It's definitely not starting off at a great spot. But there are some people out there who are both brave and willing to try their own work. I can respect that.

@SpyroTDragon 6 жыл бұрын

Yep. I do that to my 05 Dakota.

@ytmm9055 6 жыл бұрын

thanks

@missionman4539 4 жыл бұрын

Was doing mine and accidentally pulled that hose loose that runs underneath the intake cover- it goes back towards the firewall somewhere but cannot find where it attaches At 5:17 you pull the cover off there is a hose that runs underneath and curves towards the firewall could you tell me where that attaches I cannot find it anywhere LOL

@daviddargie9732 4 жыл бұрын

Always use a socket wrench or breaker bar to break the initial torque, not your torque wrench

@realsuddenlike6046 4 жыл бұрын

Great point! Thanks!

@k9feces 5 жыл бұрын

Does that air intake just pull off or do you have to somehow loosen the clamp?’

@realsuddenlike6046 5 жыл бұрын

When I did this work, I was blown away that the whole assembly just kinda...slipped off with a little tugging. I don't remember seeing a clamp. In the future, I would definitely put something over the gaps where the intake assembly was removed so other things don't fall in. (You live, you learn, right?)

@darickymeister 4 жыл бұрын

It comes off with a good tug....

@eazyboy2 4 жыл бұрын

Do u know the torque specs for tightening the sparkplugs??

@realsuddenlike6046 4 жыл бұрын

Sorry, I don't. I had the Haynes (or Chilton) manual at the time and knew.

@howardmburgers5663 6 жыл бұрын

FYI Keep swinging that metal ratchet over electrical parts like battery and alternator to make the angry pixies do their dance of fire.

@marcgriffis7704 4 жыл бұрын

Did you gain any MPG?

@realsuddenlike6046 4 жыл бұрын

It's been a few years but I honestly can't remember if it was measurable. If yours is like mine, it would take a significant increase to be noticeable at the pump.