Changing fluids and filters on ASV SR-80
Рет қаралды 2,917
3 жыл бұрынWe changed every filter and fluid in this machine because it looked like it hasn't been done in a while after it was bought. We also found leaks and attended to those.
@dmidura7282 Жыл бұрын
There is a way to purge the joystick hydro lines. That will typically solve the delayed controls.
@dmidura7282 Жыл бұрын
Locate the first 4 hydro lines under left joystick there are I believe 6 in total. First 2 are forward, 2nd 2 are backwards. Pull the first 2. Crack middle 2. Creep in reverse to purge stagnant oil out and any air. Re-tighten middle two lines. Re-attach front 2 lines and crack them and now creep forward to purge them. Then re-tighten. Oil will likely be dirty since it is stagnant.
@DocOlson 3 жыл бұрын
Hydros will be slow until fully warm in winter due to pilot controls.
@darmbrosexcavation 3 жыл бұрын
Yeah we did realize that and it did improve but we still need to replace the joystick as well.
@vadimkonstantinidi5021 3 жыл бұрын
Drain your controller fluid too because it never circulates makes it slow in reaction times
@lucasvarani5796 2 жыл бұрын
What type of hydraulic oil did you use?
SmashCrush! Arabic
Рет қаралды 38 МЛН
ASV Compact Equipment
Рет қаралды 51 М.
So Cool
Рет қаралды 18 М.
Pacific Northwest Hillbilly
Рет қаралды 2,8 МЛН
SmashCrush! Arabic
Рет қаралды 38 МЛН