Changing the transmission brake shoes on a Land Rover

Рет қаралды 12,552

6 жыл бұрын

A detailed tutorial on changing the transmission brake shoes - the lighting and sound is not so good but I hope you get the idea- this was an easy subject to cover - but difficult to film
As KZfaq have moved the goals to become monetized, and I have a niche channel, funding is never going to happen, so I have set up a Patreon as I would like to get a higher speed upload, which means I get post more videos, AND in 1080
Takes me about 2.5 hours to upload a 15 minutes at the moment.
I will be giving credits to my supporters at the end of my videos from now on. I am very grateful to one and all!
/ britrest
You can now support me on PayPal if you like this particular video!
www.paypal.me/britrest
If you have a pre 2005 Land Rover problem and do not know how to fix it, drop me a line! Maybe I can help!
britrest@britrest.com

Пікірлер: 19

@landrover1777 3 жыл бұрын

Thank you very much, very helpfull for me. Eric. New-Caledonia.

@BritannicaRestorations 3 жыл бұрын

Glad it was helpful!

@vitessetube 6 жыл бұрын

Mike. Many thanks for an excellent tutorial. Will be servicing my own vehicle soon and this is really helpful. Thanks. Brian

@BritannicaRestorations 6 жыл бұрын

Thanks! That took longer than I wanted but there was a lot to explain - gotta get some better lighting and sound - I am working on it! Mike

@davidsingleton7242 5 жыл бұрын

Hi Mike I've found using a pair of long nosed pliers held end on to the pin sometimes works for squeezing the cir-clip back into the groove works

@BritannicaRestorations 5 жыл бұрын

That's another technique!

@robmce4872 3 жыл бұрын

thanks. great vid

@BritannicaRestorations 3 жыл бұрын

Glad you liked it!

@eduardo-mata-mkt 2 жыл бұрын

Hi, thanks for the amazing tips. I have a question. What happens if we remove all drum? It's necessary any retainer to replace it?

@procta2343 10 ай бұрын

hi mike, we have just did this job, and we are having a right job getting the drum back on, any tips you can give me? My dad decided it needed doing, which it didn't need doing, only cause the screw came slack.

@BritannicaRestorations 10 ай бұрын

You may have the shoes slightly higher or lower Give them a tap up or down if the adjuster is backed right off

@procta2343 10 ай бұрын

@@BritannicaRestorations Thanks very much mike for that, it was a great help. All back together now, what we didn't do, was greece the contact points on the back plate, Did that and all was good. But we had to remove the back plate, to access the pin. Anyway i owe you a beer!

@aytonbob 5 жыл бұрын

I don’t think it matters re fitting the prop shaft in the same position, when it’s made it’s balanced off the vehicle not on. Like when you replace the prop shaft with a new one.

@BritannicaRestorations 5 жыл бұрын

I agree - but it is good to get into the habit!

@Clay.beads_Maya 3 жыл бұрын

Can’t see what’s happening

@axelcordes 6 жыл бұрын

Thank you for that one! Lots of valuable hints like putting a mark on the propshaft and the trick with the screw kzfaq.info/get/bejne/a8d4aLCVrrWukYE.html - always learning ... Ciao Axel

@BritannicaRestorations 6 жыл бұрын

You're welcome Axel! basic old time tricks! Mike

@axelcordes 6 жыл бұрын

;-) I'm myself an oldtimer.. but only lately came to Land Rovers and though learning to put a hands on my self (and 'am loving it) - so all your stuff is really helpful ! Cheers Axel

@BritannicaRestorations 6 жыл бұрын

Great! Stick around - there is a lot more to come! Mike