Рет қаралды 214,700
#spetsnaz
Raccoon on the K6-3:
The shape of the helmet K6-3 (staff notation - 6B6-3, k6-3 - the commercial name of the helmet) copies the entire helmet Altyn, as both used for the production of a stamp-molding. In the picture you can see that the helmet webbing identical. According to official information, the manufacturer of the helmet - NII Stali, a year of development and production is to start in 2002, but from informal conversations with representatives of the Research Institute of his appearance K6-3 shall means a change in market conditions since the beginning of armor 90s.
It was in the early 90s the leadership of NII Stali was decided to establish commercial production of a helmet similar to Altin and with the use of existing developments. But given the already tested new technologies and materials. Because the helmet was 3 mm thick titanium shell, less than Altyn, but was supplemented aramid overpressure. It is the words of the Research Institute of Steel. In fact, I think there was a mix-up with the original TIG welding helmets and Ulbricht, serve as templates for creating forms helmet Altyn, who had originally aramid backwater and a thickness of 3 mm. Other samples Slam Altyn (no backwater) I just have not met. It should be pointed out that at a specified time (80 years) is the Research Institute of Steel is a resource that could provide the required production material that went into the production base of the helmet Altyn. This is where the operating time and the basis for setting up the production of the simplified version of the Altyn - 6B6-3.
Music:
WIC OST - My name is legion
WIC OST - Aurora
Le Gang Des Ours - and everything nice
Another Le Gang Des Ours song but I forget name
Also consider funding my next projects: / oxide1
Discord: / discord
Shirts: www.redbubble....
Instagram: www.instagram....
Facebook: / oxideyt
/ rushingrussians
grey-shop.ru/ Code: Benj7
www.dealairsof...
kruschiki.com/ Code: oxide
www.pkpatchwor... Code: OXIDE