Nice one Tony,looking forward to seeing it all finished and on the bike. Oh and belated Happy New Year to you and yours. ;-)
@angelfernandez14316 жыл бұрын
I bought the same projectors and they're really cool.. I'm using standar Halogen bulbs and they work pretty well..
@shahidjodhpur18955 жыл бұрын
I also bought from banggood. And h1 helogan is not fit in this projector. How you do that
@changchung5 жыл бұрын
Thanks for share. Do you check the output with HIDs?
@sisithachamika46665 жыл бұрын
Hi, how about the light output? I really wanna know before purchasing one on amazon. I would appreciate if you add a separate video on light output
4 жыл бұрын
thanks. just what i was looking for. I was most interested in how the light pattern is cast though
@tonytypes4 жыл бұрын
You can check my other videos after this vid was posted. I used these on my mini moto and the light beam is actually pretty good considering I was only using a high powered LED. With a HID the beam would have been even brighter and cleaner
@zrch695 жыл бұрын
I have same projectors in my headlights and H1 LED bulbs and I'm very satisfied how they work. HID is about 10-15% brighter then LED, but on the other side LED creates less heat so chrome in the housing will not be burned. LED you bought are not good for mounting in projectors, they are for high beam in reflector housing. Try LED with phillips chip, because LED chip on them is same size and at the same position as filament in halogen bulb.
@truebreed894 жыл бұрын
Can you post a link to these bad boys and will they fit right into the projector without any mods or shaving....??
@tommyd66652 жыл бұрын
If my headlights have a separate bulb for High Beams, do I need to wire that black and red connectors?
@brandonrayner52535 жыл бұрын
I bought the same projectors for my retrofits into my 96 cavalier with a 02 sunfire front end, if I could post a picture of what they look like now I would lol. Oh and my projectors came in a different box and everything
@user-fu4yf9fb4n3 ай бұрын
used HID 35w, the reflector not come off by any chance?
@jameswaugh1157 ай бұрын
Will it fit on my 2011 srx Cadillac?
@GsFoxbody4 жыл бұрын
How would i wire up the H1 to a H13 cause my 06 Ram has a h13 female connector
@jonhunt74666 жыл бұрын
did you end up putting the leds in it?
@EDUCARPUEBLA4 жыл бұрын
Hi I have the same projector in my car. And modify the H1 LEDs, but end up returning to the HID. I did not like how the LED lights.
@tonytypes4 жыл бұрын
The LED's I got works great and super bright. The light beam was clean and brighter than most cars on the road.
@jamesdacus73674 жыл бұрын
would like links for this stuff man! interested in doing this on my 2016 cb300f
@ZERONEINNOVATIONS5 жыл бұрын
You should get Katana H1 LED bulb. Katana is really thin, so that you can fit in that hole. BTW, Hikari H1 LED didn't fit in
@claubmx5 жыл бұрын
Question if it use H1 bulbs, how do u connected to ur h4 connector on the car??
@tonytypes5 жыл бұрын
You can buy adapters or if you get a HID kit you can get it with the connector for your car
@descent82755 жыл бұрын
so what about normal H1 Halogen blubs? do these Projectors withstand the heat? Or do you HAVE to use a Xenon HID kit?
@jjmmjj99994 жыл бұрын
A HID kit runs hotter than halogens...
@kalyangautam73455 жыл бұрын
Really led is not fit in this housing?
@pb61986 жыл бұрын
The brand is KMR but its Chinese so multiple manufacturers make them, but they are unreal with hids but still not blinding
@ybrkidunya4 жыл бұрын
can h4 helogen bulb fit in this projector?
@bialyabnormal4 жыл бұрын
Nope
@jaguar70515 жыл бұрын
Hey, Joe, you need Halogen H1 Bulb or LED with rounded neck those flat one no good All Chinese made things is out of any standards and need modification All items are copy and patent protection cant goes after those tiffs because are made not same.
@goranfreight43084 жыл бұрын
So are you saying HID would be brighter and better than led? I'm in the middle of doing it now and i have both a nice led from and i have the sylvania super duper HID they make for 79 bucks at all the auto parts stores. The faster you coukd answer this the better cuz im installing them tonighg.
@tonytypes4 жыл бұрын
HID will be better than LED for sure as HID has a full light coverage. I haven't seen any local auto stores around here that sell HID besides online stores.
@goranfreight43084 жыл бұрын
@@tonytypes oh then they're probably nor hid. They're the expensive Sylvania ones that you get at AutoZone and advance Auto parts. I got the extreme white or something like that. They were the most expensive ones they had at 79 bucks.
@tonytypes4 жыл бұрын
@@goranfreight4308 don't waste money on those overpriced bulbs. Get a real HID setup.
@goranfreight43084 жыл бұрын
@@tonytypes I got those months ago. Wasn't happy and got a really nice pair of LED that I'm using now so I'll just mod it for now and use the LED until I order some hid. I'll order tonight but have to wait until they get here
@jameswaugh1158 ай бұрын
Will that fit on my 2011 srx?
@tonytypes8 ай бұрын
I don't think it will be a direct drop in. You will most likely need to retro fit the projector in the housing.
@ramonepatterson906210 ай бұрын
How do connect the high and low
@tonytypes10 ай бұрын
Low beam connects like a regular headlight. High beam is just a flap mechanism and connects the same as high beam. It's actually pretty simply and you can't go wrong
@parsalg34 ай бұрын
when you get them in amazon they tell you to do not use those led bulbs because dont fit
@tonytypes4 ай бұрын
6 years ago there was no mentioning not to use LED's. But now 6 years later tech has improved and I'm sure some LED bulbs should fit and work even better. But for my retro fit on the mini bike I had to use LED bulbs because HID's draw too much power for what the bike can put out
@M5JamesE395 жыл бұрын
Bump for a pic/video showing their light output. I wanna make sure thet have a nice ___/ ___/ cutoff to them.
@tonytypes5 жыл бұрын
I have a video on my channel check it out. It's a couple videos after this one
@EagleVroom4 жыл бұрын
Don't you dare retrofit your headlights and then run halogen bulbs in it! It'll be a terrible waste of time lol
@pebri4276 жыл бұрын
Your led bulb are bigger than normal H1 bulb, I'm using the other led bulb can fit in that projector.
@yeahnoway1114 жыл бұрын
BRUH show the beam pattern... thats what matters
@tonytypes4 жыл бұрын
Watch my other video with the projectors installed and working on my motorcycle. The beam is not bad considering I was only using high powered LED's. With HID the beam should be even wider and cleaner. This was only a first look video.
@cristianespinosa98205 жыл бұрын
Where those cables for hi and low connects to?
@jjmmjj99994 жыл бұрын
High beam power obviously
@hooman34024 жыл бұрын
@@jjmmjj9999 how do I connect it? Do I need to tap it?
@jjmmjj99994 жыл бұрын
@@hooman3402 obviously..
@jjmmjj99994 жыл бұрын
@@hooman3402 get a multimeter, find the positive wire when you "flash" (main beam) connect to the red. Black is ground self explanatory
@hooman34024 жыл бұрын
@@jjmmjj9999 okay man, cool! Thanks!
@BKRedline4 жыл бұрын
They are made for hid and hid are better than those led unless you paid 150$ plus for them
@szcustomlights21963 жыл бұрын
How to make order for these lenses
@runnerspx2 жыл бұрын
Headlights projectors bixenon
@szcustomlights21962 жыл бұрын
@@runnerspx only projectors
@runnerspx2 жыл бұрын
@@szcustomlights2196 yes my friend I bought from AliExpress
@raulnyquist6 жыл бұрын
LINK???
@26shago5 жыл бұрын
Zelda?
@maketheworldabetterplaceki40286 жыл бұрын
LEDs are not bulbs ffs
@rfcdgaf5 жыл бұрын
everyone watching this, do NOT do this, the reflectors were NOT designed for LED, only HID. creates unsafe situation for you and other road users.
@jjmmjj99994 жыл бұрын
Good thing these are projector lenses then you ignorant fuck
@youneedhost6 жыл бұрын
Dont do that bruhhhh..... also that led are not good for projectors my dude period.... i had thise on my yamaha r6 and trust me used a hid kit dont wast your time on led
@vincentking82675 жыл бұрын
Does no one know that there ARE projector kits for LEDs? Everyone just assumes that projectors are no good for LEDs, but it's HID projectors are no good for LEDs.
@tonytypes5 жыл бұрын
There are some, but none with a wide beam that is affordable. Most of the cheap LED projector uses cheap LED chips, not as bright, and has a narrow beam. That's why I decided to retrofit a real LED headlight bulb into this projector. Its bright and does not have any blinding glare. Lights up evenly too. With HID bulbs I'm sure the beam would be wider than the LED bulb I am using, but these are better and outshine any cheap LED projector. Now if you are comparing these to the $300+ led projector than that's a different story :)