CHEAP DIY Snap-on Toolbox Drawer Edge Guards (Carbon Fiber Wrap)

No video

CHEAP DIY Snap-on Toolbox Drawer Edge Guards (Carbon Fiber Wrap)

Рет қаралды 75,646

Күн бұрын

CHEAP DIY Snap-on Toolbox Drawer Edge Guards (Carbon Fiber Wrap)
3M Wrap Kit Amazon Link: amzn.to/2qAHPU7
3M Wrap Amazon Link: amzn.to/2pGMunp
3M Carbon Fiber Wrap: amzn.to/2p7hXgG
New Bumper Stickers available!! $6.00CAD Each(free shipping) Also Buy your Snap-on Tool Review Stickers here! I have Red, Blue, Green and Orange and they are $5.00CAD each free Shipping! Buy 1 or all 4!!!
www.paypal.me/... Remember to leave a comment in PayPal with color(s), quantity and Name and Address!!
Check out my Amazon Store for hand picked items by me! astore.amazon.c...
Please Consider leaving a donation if you like the videos. Every Donation helps the channel get better! Click the link below and start supporting!! Thank you!
www.paypal.me/...
Thank you for watching! As always leave a like, comment and subscribe!! Everything helps.
I do not work for or sponsered by Snap-on or any other tool company. I have spent my own money on making these videos and all the tools you see in them.
If you have a product you would like to get featured on this channel you can email me directly at toolwhore78@gmail.com
For Fan Mail please forward it to this address:
Joel Neufeld
101-1567 Grant Ave.
Port Coquitlam BC
Canada
V3B1P1
CHEAP DIY Snap-on Toolbox Drawer Edge Guards (Carbon Fiber Wrap)

Пікірлер: 126

@MidwestToolReview 3 жыл бұрын

I’d recommend using a plastic razor to trim the vinyl. The blades are made just like standard square razor blades, but are made from hard plastic (PTFE). That way, you avoid cutting into the paint. Just a pro tip...

@stoneyswolf 5 жыл бұрын

What your not doing is using an anomia based glass cleaner. You first spray the sticky side of the tape them lay out down. It will slip around to get it perfect. Use a squeegee to get the air bubbles out and the glass cleaner will squeegee out also then just let it sit and your done a perfect job with no air bubbles.

@margaritamelendez1927 5 жыл бұрын

Thanks I'm going to wrap my tool box and I wasnt really sure about the process thanks for leaving a great comment..

@mannys8259 Жыл бұрын

I like it! No runs , no drips, no errors

@justinkrodel 7 жыл бұрын

The cheap little mods add so effin much to a beautiful box!!! 👍🏻👌🏻

@choppedandscrewedcustoms 5 жыл бұрын

How about a follow up on this to see how it's held up

@jamesrahn8339 4 ай бұрын

Thanks for doing this video. I'm going to try it this week

@johngilley3518 7 жыл бұрын

Good idea. I remember the first time I dropped a tool on my draw, I was pissed. Snappy said don't worry, you'll get every penny you paid back when you trade up LOL.

@palmbeachcane9523 Жыл бұрын

I had the 73” classic & the drawer protectors were $650 for the set. I put black vinyl tape on the top for $30 from Amazon. Traded it in on my 68” Epiq with no chips or scratches for what I paid for it. Going to install gunmetal gray carbon fiber vinyl tape in the drawer tops & on the angle under the handles because the power top led light highlights the small scratches on the front.

@fordcummins83 6 жыл бұрын

I have the same color combo on my 84” epiq and my roll cart, and did this the first month I owned it, I also did the bottom where your finger nails scratch the drawer when you open it..awesome video

@davehignett2665 4 жыл бұрын

your finger nails scratch the paintwork?? who are you... Edward Scissor Hands???

@woosukchoi2897 6 жыл бұрын

This is really useful video. I did samething on my snap on classic tool box. As a result, I could save over $400 for drawer top protectors. (The price of Snap on cabon protector set is over $500!!)

@northcard5707 7 жыл бұрын

Beautiful, really adds that extra touch of detail!

@TheSnapOnToolReview 7 жыл бұрын

+North Card thanks bro! I think it looks really nice when all the drawers are closed and you just see that little bit of.

@tfic19 7 жыл бұрын

Yay so glad you were able to upload this definitely gonna do the green on mine

@TheSnapOnToolReview 7 жыл бұрын

+Tyler Fic yeah bro! Had a technical difficulty but I got through it. Haha

@deportallbeaners 6 жыл бұрын

I got the snap on carbon fiber drawer guard for my krl1022. You have to get it right the first time or the carbon fiber will break if you try to peel it off. I did wrapped my front trims with 3m carbon fiber wraps though. Really nice and sticks well.

@ColdensCustoms 7 жыл бұрын

sick as shit Joel! I'm super jelly of your box!

@TheSnapOnToolReview 7 жыл бұрын

+ColdensCustoms haha thanks bro!!

@ColdensCustoms 7 жыл бұрын

I'm definitely doing this to the Krl. I already have the stainless guards so it's going to look pretty big on my drawers I think.

@johnnyk617 5 жыл бұрын

Just got a quote for my drawer guards on my epiq and my rep said 760 bucks that’s insane deff doing this option

@Frankie_M. 7 жыл бұрын

Looks good with the carbon fiber wrap the 3M product is awesome I use it all the time👍🏼👍🏼👍🏼

@garyrobinson5719 5 жыл бұрын

Can we get an update on how it's holding up ??? I have a roll of the 3m wrap in my hand and I wanna do it to my brand new krl 722 I just got a few weeks ago .. it looks great btw

@juanhinojosa6272 7 жыл бұрын

that carbon fiber wrap is a nice touch. if I ever buy a new box Im going to look into something like that.

@Carpmenblog 5 жыл бұрын

The F-Bombs are just classic

@firstnamelast5246 6 жыл бұрын

I bought a roll of that carbon fiber wrap six months ago, no idea what I was going to do with it,,,,, well shit, guess I'll be doing both of my boxes now. Good idea. Looks brilliant. Nice thing about that wrap, if you do need to peel it off it doesn't leave all sorts of adhesive behind.

@14robeson 7 жыл бұрын

i want to do this to my KRL722 now! new box gotta make sure its nice foras long as i can.great video man. keep it up

@krisn8820 5 жыл бұрын

Don't peel backing till you line it up. Tape in center, peel backing on one side, cut it off, then lay down. Pick up other side and repeat. No sticking and peeling

@juancam648 7 жыл бұрын

Cause my Epiq is black on black, I took apart the drawer and carbon wrapped the top part and the bottom (the red part on your box) and left the center black chrome. To me it was just a lot faster not having to trim with knife and chance cutting into paint. I used VViViD+ which worked very well and I ordered it off Amazon.

@curious9715 4 жыл бұрын

Nice box

@petterbalfour356 5 жыл бұрын

another example of joel's ability to do nice hand work

@dragwan_wowwww 7 жыл бұрын

Thanks for this. I started doing this and may I suggest a method? My box is white so no matter how straight I try to line the front of the drawer, White would show. I found if you remove the screw on one side and remove the drawer clip, you can slide out the drawer trim completely. I was able to apply the vinyl on the top, easily fold over the edges. Trim the excess hanging past the edges without the fear of cutting into the paint. Slide the drawer trim back in and install the clip. Now I have the wrap that goes under the drawer/opener and no original paint showing even opening the drawer

@shortyz4me 6 жыл бұрын

I find myself enjoying this channel a lot more when u say "fuckin" it reminds me so much of Ricky from trailer park boys.

@TheSnapOnToolReview 6 жыл бұрын

+Levi Carlton haha best show ever!

@eddieds312 7 жыл бұрын

looks awesome reminds me of something out of a Formula 1 paddock

@dillwiggle2 7 жыл бұрын

I bought some but never tried it yet, you can heat it and put it on some odd shapes and stuff, will have to try soon, good idea using it on the drawers ! Cheers !

@TheSnapOnToolReview 7 жыл бұрын

Dill Wiggle yeah it's pretty versatile for sure bro. Thanks man.

@Roadhouse1997 7 жыл бұрын

+The Snap-On Tool Review love that color combo

@TheSnapOnToolReview 7 жыл бұрын

+Austin Wilson thanks bro. I love it too.

@willfelipa5419 7 жыл бұрын

That's awesome great job man, my snap on guy told me if I wanted that carbon fiber look on my drawer, I said ok but when he told me the price I was like na fuck that I'm good 😂 great video and idea ima do just that.

@TheSnapOnToolReview 7 жыл бұрын

+Will Felipa glad I could help! It's crazy they want to charge so much.

@danc2581 4 жыл бұрын

Looks pretty cool on a black box, but I'm wondering how this would look on my Arctic Silver Master series box. I was doing an exhaust job that involved heating the manifold nuts with a torch. Two nuts came off easy, and the third one rounded off. I ran to my tool box for a smaller socket with a lit torch, and put a burn mark on my top drawer!!! Thoughts? Would Arctic Silver, and carbon fiber look good or too much contrast?

@bobbygarrett9588 Жыл бұрын

Did you ever do it on your box? I too have a KRL 1023 in Arctic Silver and was wondering how it would look.

@scottpearsontoolsmore185 7 жыл бұрын

another great video thanks my friend. I have to say I like the looks of it.

@lowpressure676 7 жыл бұрын

Awesome dude!!! Can you do another updated tool box tour? I would like to see them ratchets. Great video as always

@boohoo4827 5 жыл бұрын

Yeah got me some down time to wax the scratches out of my TOOL BOX !!!! Also got extra time to polish the vinyl siding on my house LMAO

@BoxcarsGarage 6 жыл бұрын

I'll look for it but....who sell the foam mattress you used for your ratchet drawer? I like that texture. Did you shadow box that? Very nice cuts....looks professional.

@ben_the_cat_guy 5 жыл бұрын

Boxcar's Garage I think he has used Eva foam floor mats and just cut it with a very sharp blade

@shockwaveaz 7 жыл бұрын

I need to do this. Thanks for the video. "stupid fucking squeegee thing" lol

@TheSnapOnToolReview 7 жыл бұрын

+Mr. Bob Dobalina bahahaha I don't know what that fucker is called. Thanks bro.

@melias67 7 жыл бұрын

Love your channel. Any tips of storing wrenches? The snap on plastic cases are too tall for my box, and a touch too wide. Any ideas rather than just laying them down in the drawer?

@ChaosGarage 7 жыл бұрын

Fucking bacon and eggs...fuck yes! Looks good man.

@TheSnapOnToolReview 7 жыл бұрын

+Chaos Garage haha thanks bro!

@johnnyk617 5 жыл бұрын

Aaaaaand you just earned yourself a subscriber. Is there any spray coating you use to prevent scratches on the box?

@lawrencejonap6638 5 жыл бұрын

Very cool idea.

@LooseyEh 7 жыл бұрын

Loving it! Nice and easy!

@doug4yougial 6 жыл бұрын

Nicely done.

@bryanbethea8335 7 жыл бұрын

looks good dude.

@TheSnapOnToolReview 7 жыл бұрын

+Bryan Bethea thanks bro!

@johngibson3594 7 жыл бұрын

Nice little mod

@mannisamra5973 7 жыл бұрын

Lave it 👌🏼😎 looks wicked dude!!!

@jasonn2284 4 жыл бұрын

I bought a brand new Snap-On KMP1022 Tool Box in storm Grey black trim today. Love my new box with the power drawer and power bedliner top. Was $7140cad traded in my KRL 722 and got $4000 for it. Was it a good deal to you?

@tomyee1336 6 жыл бұрын

Awesome video Joel. I think I want to do that with my krsc326 arctic silver with carbon wrap would look sick.

@fraudsarentfriends4717 6 жыл бұрын

Looks like a real busy shop.Tools don’t don’t look like they’ve been used much either.

@TheSnapOnToolReview 6 жыл бұрын

I take care of my tools unlike some people. Some of these ratchets are fairly new.

@frogfoot6218 7 жыл бұрын

looks mint great idea 😎

@toytech468 7 жыл бұрын

Looks awesome bro! Did the same on my box, came out pretty good! Are the candy-red drawer liners on your epiq interchangeable?

@TJ_Actual 7 жыл бұрын

Sweet! Red carbon wrap on a red box? Might have to get some and try this out.

@J.G.Romo.W. Жыл бұрын

When were those uniforms issued to Hyundai?! Been a Hyundai tech since 2016 and never seen these. Just saw recent months that we were switching to black uniforms.. are these them? Lol how many years later.

@joeyreed5439 7 жыл бұрын

Man that looks awesome, I'm thinking about getting my entire box carbon wraped

@TheSnapOnToolReview 7 жыл бұрын

+Joseph Reed yeah I was thinking a full wrap. I'm looking into just clear wrapping the entire box. Keep it nice and clean.

@toolinhand 6 жыл бұрын

Looks great.

@maxs1700 7 жыл бұрын

Looks freakin' great, like the that carbon fiber and the shadowing stuff was planned or somethin. Got an episode idea for ya. Explain the difference between the box styles, the epiq, classix, master, etc. for us less educated folk, thanks

@martinschaffmeir7729 7 жыл бұрын

hey good post and great job. thinking i should do the same to my box

@TheSnapOnToolReview 7 жыл бұрын

+Martin Schaffmeir thanks bro!

@WOODY11780 5 жыл бұрын

Great job.....Enjoyed the "F" bombs too !!!.....Thank You !!!

@gordonfreeman5434 7 жыл бұрын

Was going to do this to my husky box, but the place I work are moving to a place with the built in boxes lol.

@imeeducatediz7861 4 жыл бұрын

Hey what foam sheets are being used for your ratchets ? Anybody know

@kylesnowdon8242 7 жыл бұрын

Shit man that looks pretty damm good and easy to do I'm going to have to do that to the old classic of mine my drawers a getting nicked up pretty good on that part 👍🏻🔥💪🏿on my box

@TheSnapOnToolReview 7 жыл бұрын

+Kyle Snowdon yeah just trying to slow down the aging of the box. Haha

@kylesnowdon8242 7 жыл бұрын

Ya totally wish I had done something like that seven years ago on mine lol you have to try and take the best care of them because they cost so damm much but you can't be a tech without a snap on box lol just kidding on that but for some damm reason we all have one 😜👍🏻

@kellyr9388 7 жыл бұрын

great idea

@nosuckas 4 жыл бұрын

I’m wondering if I can do the wrap and throw the clear protective guards over it on my krsc46 would probably look real good

@jackmendez8579 7 жыл бұрын

ive been thinking about doing this with my box, but with yellow wrap

@FrankHotdog 5 жыл бұрын

That 'four hundred dollar fuckin package' made me a captive audience. Tell it like it is, bro.

@keithlarmie4523 7 жыл бұрын

that really pops! Hell ya bro!

@maxa.759 4 жыл бұрын

How's it holding up?

@rodmascotto6750 7 жыл бұрын

cool editorial.....

@gilbymdg9609 7 жыл бұрын

NICEEEE my tool box draws are scrattced and chipped to fuck, but i refuse to buy a new one, if only i new this trick years ago lol, great vid. GP

@marlenhunter153 3 жыл бұрын

How well does it hold up? Thinking of doing this to my epiq.

@Dansyoung 7 жыл бұрын

Hey Joel, just wondering if you ordered the 3m product from amazon.com yourself? I'm having issues trying to find the product within Canada?

@wayneshanks9005 6 жыл бұрын

Awesome

@kevinc3925 4 жыл бұрын

What foam are you using for drawer organization?

@wildwez2093 7 жыл бұрын

Love watching your vids man. Always watching at school and when I'm free, Was wondering empty how much was your box roughly, if you don't mind saying on the comments. Just curiouse cause in Australia no fucker has these. Just fucking kingchrome stuff. Four blokes at my onsight place have the EXACT same box

@TheSnapOnToolReview 7 жыл бұрын

+GUSTROKEN hey bro. My box list price is 13000.

@wildwez2093 7 жыл бұрын

Thanks man. Reckon they are worth it?

@Jursaw 6 жыл бұрын

Wes McKay buy a used one, they are really nice boxes

@michaelszweda 7 жыл бұрын

Tool box looks great where did you get the foam inserts I need to do that to my tool box

@KyleE-pm1nt 6 жыл бұрын

Michael Szweda he made them out of interlocking foam workout mats.

@jimmiewood9617 5 жыл бұрын

What do you use for your drawer liners

@dirtymotovation 4 жыл бұрын

Where did you get the foam to shadow your box?

@xavierlozano9459 6 жыл бұрын

What material (foam) are you using to organize your tools?

@TheSnapOnToolReview 6 жыл бұрын

Connect-a-mat. Get it from amazon, Walmart, etc.

@kenpryor4440 7 жыл бұрын

I like that it cost me almost 600 to put the stainless on my krl boxes and they are looking like shit 4 yrs later and a few are starting to come loose

@fenrizwulf6682 4 жыл бұрын

Put a little air tool oil on a rag and wipe them with that. It makes them look like new again.

@J-ThomasRST 5 жыл бұрын

Sound just like Randy

@fernm7379 6 жыл бұрын

What color guard would u put on a electric orange snap on???

@TheSnapOnToolReview 6 жыл бұрын

Black all the way!

@RAM243VALDEZ 6 жыл бұрын

can you do the handles that you kno of

@B.E.Long.63 7 жыл бұрын

FOR THE PRICE OF THEM BOXES THERE SHOULD BE NO PLASTIC AT ALL, PLASTIC DRAWER LOCKS REALLY????....

@TheSnapOnToolReview 7 жыл бұрын

+Bill Long they are metal with a plastic mounding over them.

@sbkarmen 6 жыл бұрын

steel would wear guys. and buying snap on I've gotten every penny back trading them in on new boxes. also if youre smart you'll buy when snap on has 20% off financing it, plus my snap on guys gave me an additonal 20% off initially. so basically my box is $28K -20% =$22.4k- 20% = $17.9K. he gave me $8k for trade in that I paid for a repo box $4k..... long story short I paid 14k for a crazy ass tool box and wrote it off for my business... so yeah there is mark up, but snap on is a great product and when you buy the best its easy to off load it.... unlike other brands!

@twostroke12v71 2 ай бұрын

Coolio

@cheezuscrust7730 2 жыл бұрын

Are you canadian?

@e36m3JeffKennedy 7 жыл бұрын

You really seem like you know how to tuck it! Like you have had some experience there? LMAO

@daddyhermanson9737 4 жыл бұрын

50 grand for snap on box and tools $400 for drawer protectors no way thats a rip off !!!! Lol

@SuperHemiDodge426 4 жыл бұрын

I have the epic 68 black so I know what you're talking about on the mild scratches and I have the purple pull handles And I must say again excellent job on the power drawer my dealer told me I couldn't do it and they can shove it up their ass because I knew it can be done Excellent job thanks again

@ccurrell 6 жыл бұрын

So you spend $20k on a tool box and cover it with $5 of Walmart shelf liner paper? LOL

@swaggin123425 5 жыл бұрын

Thinking that epic cost 20k for just the roll cab LOL, about 8k around there depending on your dealer and current deals snap on offers. Also if ya did buy a 20k 72 decked out epic with hutch side cab and all why spend another 400 for some snap on liners when online car wraps work fine for no extra mark up.