CHEAP FRAMELESS WALL MIRRORS! - Extra Large Full Length Home Gym or Studio Mirror Home Depot 36 x 60

Рет қаралды 85,202

Күн бұрын

Mirrors I have 👉 bit.ly/HomeDepotMirror
Screws and Anchors I recommend 👉 amzn.to/2TCnP2Z
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🔔 SUBSCRIBE 👉 bit.ly/MattTolbersKZfaq 👈
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
What's up guys, this is Matt Tolbers! In this video I show you the wall mirror setup I have in my home gym. I have 4 large 30 x 60'' frameless wall mirrors I bought from Home Depot. I think these are the best cheap large mirrors you can get for your home gym or a dance studio. These Frameless wall mirrors are currently only $55 from Home Depot which is very cheap compared to other similar mirrors out there. These full length mirrors let you see your whole body when placed about 1.5ft off the ground.
Thanks for watching guys! If this helped you please leave a like, and consider subscribing for more home gym equipment reviews!
The links in the description are affiliate links, so if you buy I may get a small commission at no extra cost to you.
#HomeGym #Mirrors #GarageGym

Пікірлер: 171

@MattTolbers 3 жыл бұрын

Hope this helped champs! They have a ton of smaller sizes to choose from also. Mirrors I have 👉 bit.ly/HomeDepotMirror Screws and Anchors I recommend 👉 amzn.to/2TCnP2Z

@maximumsoftness7469 Жыл бұрын

These are now $85 each at Home Depot... everything IS SO MUCH MORE EXPENSIVE NOW

@ctech24 2 жыл бұрын

Good project. I’m going to put these up for our garage gym. This video was exactly what I was looking for..

@8mathdaddy 3 жыл бұрын

That's awesome!! Thanks for the advice. Your home gym looks amazing.

@MattTolbers 3 жыл бұрын

No problem and thanks! 😀

@dr.marcia-thesolutionheali5896 3 жыл бұрын

You are the best. Thank you so much. I've been wanting to add mirrors to my home ballet/Pilates studio and was devastated to learn that the Home Depot mirrors I'd purchased previously had shot up in price to something I couldn't afford. I'm ordering these today and putting them up this weekend. Thank you so much!!!

@MattTolbers 3 жыл бұрын

Awesome, no problem 🙂

@PaulMcDougall04 3 жыл бұрын

Thank you for this video. I’ve been shopping for a mirrors and set up advice. Super helpful!

@MattTolbers 3 жыл бұрын

No problem Frank, glad it was helpful!

@rovieriel621 3 жыл бұрын

Just got these and installed them. Definitely the best bang for the buck. Easy install and surprisingly large range of view.

@MattTolbers 3 жыл бұрын

Awesome Rovie, I definitely agree. Glad they are working good for you also!

@adamclark9819 17 күн бұрын

Thank you for this video! Helped me out and is going to save me money!

@itscrucial 3 жыл бұрын

Matt, thank you so much for this one. Making my home gym come together really nice.

@MattTolbers 3 жыл бұрын

I bet it feels good to see your personal gym come together :)

@busupshot83 3 жыл бұрын

Wow great find! I am building my garage gym, and mirrors were the final piece of the puzzle. I ordered 4 of the mirrors, 2 J-Molds, and an extra pack of Mirror Brackets with drywall anchors. Thanks again!

@MattTolbers 3 жыл бұрын

Nice! Glad you’re able to finish your gym off with some mirrors now!

@bgpinoy 3 жыл бұрын

We were looking everywhere for a mirror and finally found these at Home Depot. But still had a question about how to install. Then I ran into your video and it really helped us decide what to buy and how to go about installation in our gym room. Thank you for posting this! Your gym looks incredible. Ours will be a combo of Boxing/Muay Thai/Zumba gym. These mirrors will help with form and also make the small room look bigger. Thanks again!

@MattTolbers 3 жыл бұрын

Thanks and no problem 😃

@jdmalm123 3 жыл бұрын

This is the way to go. I once did this with the narrow $10 mirrors and it was a pain using 4 clips per mirror times 10 or so mirrors. Using the right hardware is important. The J-molding was a clever fix! You have a good eye for gym aesthetics.

@MattTolbers 3 жыл бұрын

Lol I bet! Thanks bro

@briancarpenter4126 9 ай бұрын

I wanted to say thank you for your advice in the mirrors for my home gym creation you have saves me 100s of dollars

@1129Misspiggy 3 жыл бұрын

Thanks so much! I've been looking for ideas everywhere, I'm going to purchase these asap

@MattTolbers 3 жыл бұрын

No problem, glad it was helpful!

@theodoreboosalis 3 жыл бұрын

Awesome gym Matt. The mirrors make it look HUGE too.

@MattTolbers 3 жыл бұрын

Thanks bro! The mirrors definitely help it look bigger 😃

@antmac4284 3 жыл бұрын

Nice setup. I’m going to check out the rest of your videos

@MattTolbers 3 жыл бұрын

Thanks bro!!

@CoachDarren 3 жыл бұрын

Hooking up my home gym and needed mirrors and this helped big time thanks.

@MattTolbers 3 жыл бұрын

No problem bro, thanks for watching!

@owentimo 2 жыл бұрын

Thanks. I just bought 3 of these!

@richardjan6007 7 ай бұрын

This was actually informative.

@jess4910 3 жыл бұрын

Thanks for this! Just snagged the last 2 from my home depot today :)

@MattTolbers 3 жыл бұрын

No problem, glad you were able to get some!

@richlucero3536 2 жыл бұрын

Great vid. Just did this because of this video. Cheers!

@MasterOfNone88 3 жыл бұрын

Exactly What I was Looking For.

@MattTolbers 3 жыл бұрын

Glad to hear that bro 😀

@cv95killer 3 жыл бұрын

Thanks for making this video!!

@MattTolbers 3 жыл бұрын

No problem Cole, thanks for watching!

@marucat2797 3 жыл бұрын

Awesome home gym Matt! I really like the mirrors. I wish I installed these before I set my small home gym up. Now I have a half rack in the way lol. I’m currently using these cheap mirrors from Target, one day will upgrade to something similar to what you have. Keep up the great videos!

@MattTolbers 3 жыл бұрын

Thanks lol! I know what you mean, I want to finish my walls and paint them but I have so much stuff in the way at this point it’s not worth it.

@lianturc Жыл бұрын

awesome stuff, thanks bro!

@lbcitylacounty4982 3 жыл бұрын

You give good reviews G dogg! Thanks 👍

@MattTolbers 3 жыл бұрын

Thanks bro!

@dewayneoverton466 3 жыл бұрын

Nice gym, I saw those mirrors online this morning! Definitely going to purchase two of them.

@MattTolbers 3 жыл бұрын

Thanks bro, great decision!

@markmcfadden7428 2 жыл бұрын

Thanks for the info

@blakesharette26 2 жыл бұрын

Bro you are a lifesaver. Was freaking how figuring out how I was going to budget for $400 - $500 each for my dance studio.

@MattTolbers 2 жыл бұрын

Glad it was helpful and saved you some money 😀

@jesperpetersen636 7 ай бұрын

Looks good. 💪🙏🏻

@karencurry7589 Жыл бұрын

You have a nice gym!!!

@MayriseASMRs 3 жыл бұрын

Love this thanks so much!!! Heading to home depot first thing tomorow

@MattTolbers 3 жыл бұрын

Awesome, hope it's working out great for you!

@MayriseASMRs 3 жыл бұрын

@@MattTolbers definitely is 😊 i added a 36" tv for fun also, its a small space but i can do my weights plus zumba😊 the mirror is my fave though had my husband installed it the next day post your vid, thanks again

@elizabethbfkd 3 жыл бұрын

Thank you so much!!!

@MattTolbers 3 жыл бұрын

No problem!

@nerdindaherd5907 2 жыл бұрын

Thanks bro!!!!

@MattTolbers 2 жыл бұрын

No problem bro! Thanks for watching

@nevysanz4152 2 жыл бұрын

Thank you for the information, I will get the same size of mirrors 😁by the way nice home gym 💪🏻

@MattTolbers 2 жыл бұрын

No problem and thanks!

@Idlax1004 2 жыл бұрын

Just saved me a ton of money!!

@teddyruxpin3811 2 жыл бұрын

You saved me. I was looking all over for big mirrors. I thought my only option was to order from a local custom mirror shop and pay $250 per mirror.

@jr.sciencebros.8411 3 жыл бұрын

Just did this project with 2 of those exact mirrors side-by-side and 72" J molding. However, I used a stud finder to anchor the J molding and top clips to the studs. I didn't even bother to use clips for the sides because the mirrors are stable enough and more holes in the wall was unnecessary.

@MattTolbers 3 жыл бұрын

Nice bro, should hold well!

@daviduriarte3399 Жыл бұрын

The J Moulding says it supports up to 50LBS. 2 mirrors weigh 66LBS. Have you had any issues? I plan to use 1 J molding strip, 2 60x36 mirrors and mirror adhesive to the wall. No clips.

@jr.sciencebros.8411 Жыл бұрын

@@daviduriarte3399 No issues whatsoever for the past 2 years. I've never used mirror adhesive so I don't know how strong it is, but I didn't want to ruin my wall like that. If you're concerned it's not strong enough, I would recommend securing the top with 3 clips total (1 on each edge and 1 shared between the 2 mirrors in the middle. They probably don't need to be drilled into studs if you're already using mirror adhesive.

@digital21llc 2 жыл бұрын

I was about to pay twice as much for a smaller mirror on Amazon until I saw this video. Thanks Matt!

@EeveeLO6 2 жыл бұрын

Thanks

@Christian-wr4ge 3 жыл бұрын

Nice set-up. It was really well explained too. I appreciate it I will probably do the same :)

@MattTolbers 3 жыл бұрын

Thanks Christian and no problem!

@talktorohit54 2 жыл бұрын

Thanks for the video. Planning to do the same. You could have just put the clips which came on on studs directly. If they are 3 ft wide their must be at least two studs to put the clip in.

@MattTolbers 2 жыл бұрын

I actually did put them where studs were for most part, but screws not very deep and hardly goes into wood so I added extras.

@vinnylolar7374 3 жыл бұрын

I like it brother Cousin Vinny ✌️✌️

@MattTolbers 3 жыл бұрын

Thanks champ! Let's hangout soon 👊

@Fabian.chavez1 2 жыл бұрын

Installing these this weekend, wish me luck! Thanks for the info. I did go with J Molds, unfortunately Home Depot currently does not carry them so I had to source them fronLowes

@MattTolbers 2 жыл бұрын

Hope install goes well bro!

@Fabian.chavez1 2 жыл бұрын

@@MattTolbers thanks!

@karlaw1thak 3 жыл бұрын

Thank you for the recommendation I bought the mirror you recommended at Home Depot just wish you would have recorded you actually putting them up! Lol

@MattTolbers 3 жыл бұрын

Nice bro it's pretty simple. Just Measure the width total of the mirrors you will put up and then cut the j mold at that length if needed. Then measure the height you want the top at and mark it and then mark the bottom where the j mold will go. Use a level so you can get the j mold straight and then start nailing it in or screwing it in. Then put mirror on top and hold it while you screw in the mirror clips. Make sure it's holding up well, add extra clips if needed and you should be go to go :)

@truthhurts7529 Жыл бұрын

Great video man! How would you suggest us hanging these mirrors in the workshop against metal I beams? Maybe attach 2 x 4’s to the metal beams and then hang the mirrors?

@James-oh1wp 29 күн бұрын

Nice job ! I’m about to do the same … curious why you didn’t use adhesive glue as well ?

@heyheythecat 2 жыл бұрын

I did the same setup at home, like a dance studio. The issue I have is even tho the mirrors are flush next to one another, the reflection won't be as flush (this is especially visible in the video between 2nd and 3rd mirrors, same issue with mine.) I think probably due to thinness of these mirrors (1/8"). However the incredibly cheap price justifies the purchase.

@MattTolbers 2 жыл бұрын

Maybe try putting some kind of glue to hold it tighter to wall in middle, that should help. Mine look plenty good for my use, but if you want closer to perfection you’d have to get those thick really big mirror which would obviously cost a lot more but that’s the next option I know of.

@CaminDaR 2 жыл бұрын

Hey, what did you use to cut off the excess j-molding?

@GayleGrantDocGrant 3 жыл бұрын

Great video/ideas here Matt..I wonder if you could use construction glue to hang up these mirrors?

@MattTolbers 3 жыл бұрын

The mirrors aren’t very heavy, so I’m sure you could. I personally wouldn’t do it for the chance it falls and break though

@biblecharlie 3 жыл бұрын

just bought everything. I'm only using one mirror (3 foot by 5 foot). I'm a little nervous about these little nails holding the J Track at the bottom with the weight of the mirror though. But the holes are so small you have to use the nails.

@MattTolbers 3 жыл бұрын

I was at first but it's held perfect. You could always drill little bigger holes and put bigger nails or screws in if you want.

@peeteapee 3 жыл бұрын

@home gym reviews where did you purchase the weight horn attachment for the power rack? Those are neat, Id like them for my power rack as well.

@MattTolbers 2 жыл бұрын

There from Titan Fitness as is the rack. I have an older video if you want to check it out. Sorry for super late response, just saw this.

@SahitiSeemakurti 2 жыл бұрын

Will these screws go into concreate? I want mirrors in my basement and the walls are concreate . What do i have to change so that these mirrors can be nailed into concreate?

@user-pe9ko8ck2y 2 жыл бұрын

Hanging on concert wall any ideas ? i can't drill holes because of i rent

@thekukoo12 2 жыл бұрын

Are these tempered with safety backing?

@EastCoastReefer 9 ай бұрын

Any distortion or inconsistencies with the magnification?

@johnhyun8 2 жыл бұрын

Thanks! One question: did you use any adhesive on the back of the mirror??

@MattTolbers 2 жыл бұрын

No adhesive was used. They’re not very heavy and once you have them straight up against wall the weight doesn’t really pull outward so nails or screws should be fine

@sarahfilipski6598 3 жыл бұрын

We are a little concerned about the sturdiness of the plywood wall in our basement that we want to attach these to. Do you think they would be fine resting on the ground and anchored to the wall? What would be your recommendation?

@MattTolbers 3 жыл бұрын

They are very light so your plywood wall should hold it easily. The only thing is you want them to be in straight and flat position as much as possible because the mirrors aren’t super thick and if they get a bend in them it can distort the reflection image.

@simonisraelian9149 2 жыл бұрын

I just bought three of these 36 x 60 mirrors. I just made new gym in basement. Do you have any ideas on how to attach this j brackets to cement wall ?

@MattTolbers 2 жыл бұрын

I’ve never done that so I don’t, but I’m sure it can be done. There’s gonna be some pro on KZfaq or google showing how it’s done.

@SilverbugInc 6 күн бұрын

How do you cut the j mold?

@jfrank2689 2 жыл бұрын

You have to find the studs in the wall

@kelleylarsen1937 2 жыл бұрын

can you write on these mirrors with erasable markers?

@emilyfoster4564 2 жыл бұрын

We bought these mirrors today, a total of 5 for 2 different walls. We are stuck on the j molding though. We wanted a long piece (so it goes the whole way across without having a bunch of smaller oeices and alot of places do not ship them as long as 10 or 12 feet. Did you get the 6 foot ones from home depot? If so, did you have problems with leveling?

@MattTolbers 2 жыл бұрын

Yeah I just used the 6 foot ones. No issues they line up well next to each other and will be plenty strong

@CoLdBLaDe 2 жыл бұрын

Nice set up, can I please get the link to the J molding?

@MattTolbers 2 жыл бұрын

Sorry I’m super late but here’s link www.homedepot.com/p/Masterpiece-Decor-72-in-Silver-J-Mold-82007/205598138

@dolender77 3 жыл бұрын

heads up that the mirrors listed here are .15 inches, however the anchors/mounts recommended are for .25 thickness mirror. be careful on that. Lowes has a .25 mirror at the same price but whether you want the added weight when hanging is a question to consider.

@tradermos1851 3 жыл бұрын

Saw the thicker lowes mirror too which is 50lbs vs. this home depot one that is 30lbs. Is there any advantage going with the lowes one?

@leokennedy4894 3 жыл бұрын

God dam Stewie griffin grew tall. Good vid.

@MattTolbers 3 жыл бұрын

😂

@aluminum7586 2 жыл бұрын

I would drill the holes into the studs.

@MattTolbers 2 жыл бұрын

You could do that, but it’s so light you don’t really need to.

@mark.brewster 3 жыл бұрын

Do you have a link for the j molds you used ?

@MattTolbers 3 жыл бұрын

Sorry if I'm late but here's a link. www.homedepot.com/pep/Masterpiece-Decor-72-in-Silver-J-Mold-82007/205598138?source=shoppingads&locale=en-US&mtc=Shopping-B-F_D29B-G-D29B-29_22_VANITIES-Multi-NA-NA-PLA-NA-NA-Bath_Mirrors&cm_mmc=Shopping-B-F_D29B-G-D29B-29_22_VANITIES-Multi-NA-NA-PLA-NA-NA-Bath_Mirrors-71700000039773661-58700004281122857-92700050322723376&gclid=CjwKCAiA6aSABhApEiwA6Cbm_-EDp3b0wRkOr2RZy_rdOuYVIERULZrAAsdT-3J0cNsySQXT0j3XIRoC01YQAvD_BwE&gclsrc=aw.ds

@rocky007123 3 жыл бұрын

Hey Matt, great review videos. Subscribed. A quick Question, i am 6'1, 195 pounds. I was thinking about buying the Ironmaster super bench Pro with many accessories (leg accessory for the decline, incline seat, chin up bar, the 12.25 inch pad, the cable tower and the lat row leg handle as well). What do you think about Iron Master super Bench pro along with those accesories ? I am not that huge into lifting heavy, can go up to 225 on the incline for a few reps and the same on flat and decline. Is this sufficient enough ? I looked up Rep AB and FBs but they are always out of stock and the rogue are too one dimensional.

@MattTolbers 3 жыл бұрын

Hey John, I think the Iron Master Super Bench pro is very interesting. It's a little funky in my opinion, but think it can work very well for people who just want a mini gym all focused around their bench. I personally think something like the Inspire Fitness FT2 with the bench and leg attachment is much better, but Obviously costs quiet a bit more. All those attachments for the ironmaster bench would take up a good amount of space and I feel the FT2 wouldn't take up much more and be able to do a ton more exercises. Or the scs bench with leg attachment and preacher curl plus a power rack would be amazing setup. I personally have not used the Iron Master bench yet, but that's my opinion based on what I've seen and experienced. Also not sure how stable the bench is with those attachments. Could be a pretty cool option for some though

@rocky007123 3 жыл бұрын

@@MattTolbers Thank you Matt, the inspire fitness FT2 is quite costly. But thank you for your honest review on the ironmaster super bench pro.

@rocky007123 3 жыл бұрын

Sorry for keeping on bugging you, but one last Q, if you have to choose a FID bench that would suit a 6'1 guy like me, which one would you recommend ? that i can purchase now without any Out of Stock stuff ? Thanks Again.

@Keeps- 3 жыл бұрын

If these break will it break into a lot smaller pieces ? Or the big sharp pieces ?

@MattTolbers 3 жыл бұрын

I’m not a glass expert and have never broken one some I’m not sure.

@jeremy_c9163 3 жыл бұрын

Using these mirrors and that specific J-Molding, are the mirrors perfectly flush to the wall? I'm worried the molding will push it a MM off the wall at the bottom then I'll bump into the mirror one day and break it! Great video BTW

@MattTolbers 3 жыл бұрын

Not perfectly flush, but my walls probably not even perfectly flat lol. They are pretty thin and have some give to them, they won't break from that.

@jeremy_c9163 3 жыл бұрын

@@MattTolbers Thanks for the reply! I actually just ordered the mirrors and j-channel you recommended. Going to use your link to get the clips too.

@DanesinTexas 3 жыл бұрын

I put two of these up recently, great price for the mirrors... unfortunately my drywall is so uneven, getting the mirrors levelled was a mess since they would bend slightly. Ended up just putting two up. Used that j-channel as well. Was planning a posting a video, but all the footage was basically me dropping f-bombs for like 30 straight minutes. Yours look much more even than mine. Good work!

@MattTolbers 3 жыл бұрын

lol thanks bro, mines not perfect either but does the job :)

@gaelicpatriot3604 3 жыл бұрын

Would these mirrors work if you were doing heavy deadlifts and pendlay rows or would the shaking be too much?

@MattTolbers 3 жыл бұрын

Should be fine as long as there mounted to a solid wall and your not slamming weight super hard

@gaelicpatriot3604 3 жыл бұрын

@@MattTolbers Sounds good, I was curious. Thank you

@sonofashepherd6668 2 жыл бұрын

Wait how tall are you? Ahahah jk In all seriousness, great video!!I appreciate the contents I will be doing this to my home gym. Quick question, do you think it would be possible to use J molding both on the bottom and top?

@kellittaa 2 жыл бұрын

Niceeee , on Amazon they are so pricey.

@MattTolbers 2 жыл бұрын

Glad it was helpful!

@ivo3777 3 жыл бұрын

Would you mind send link of the j molding pls thank you

@MattTolbers 3 жыл бұрын

www.homedepot.com/pep/Masterpiece-Decor-72-in-Silver-J-Mold-82007/205598138?source=shoppingads&locale=en-US&mtc=Shopping-B-F_D29B-G-D29B-29_22_VANITIES-Multi-NA-NA-PLA-NA-NA-Bath_Mirrors&cm_mmc=Shopping-B-F_D29B-G-D29B-29_22_VANITIES-Multi-NA-NA-PLA-NA-NA-Bath_Mirrors-71700000039773661-58700004281122857-92700050322723376&gclid=CjwKCAiA6aSABhApEiwA6Cbm_-EDp3b0wRkOr2RZy_rdOuYVIERULZrAAsdT-3J0cNsySQXT0j3XIRoC01YQAvD_BwE&gclsrc=aw.ds

@ivo3777 3 жыл бұрын

@@MattTolbers thank you 🙏!!!

@MattTolbers 3 жыл бұрын

No problem!

@devinmcnamara5025 3 жыл бұрын

How many screws/anchors do you need per mirror?

@MattTolbers 3 жыл бұрын

With the J mold on the bottom I used about 5-6 anchors per mirror.

@beanswtf 2 жыл бұрын

Wow these are almost $60 now. Crazy but still a good option

@B_HarTz Жыл бұрын

$60? You mean $90? Lol

@CrimeSaga Жыл бұрын

Did he mention that he was 6' 1 at all"?? 😂

@uberlifter 3 жыл бұрын

Not sure you covered this but will this work for a taller guy say 6'1?

@MattTolbers 3 жыл бұрын

I’d watch the full video again, I explain and demonstrate it for a visual. I’m 6’1 also and yes it does

@holycrapthatsalotofketchup253 3 жыл бұрын

@@MattTolbers he was being sarcastic hahaha

@MattTolbers 3 жыл бұрын

I hope so 😂

@Lobi10879 2 жыл бұрын

Literally every homedepot is out of stock now for these mirrors 🥲

@MattTolbers 2 жыл бұрын

Dang sorry to hear that! Hope they restock soon

@kianmerrills 3 жыл бұрын

Bought £100+ mirror couple months later smashed to bits thanks barbell 😂

@MattTolbers 3 жыл бұрын

Dang 😂

@alanwalsh3274 3 жыл бұрын

Is that a glass or acrylic mirror?

@MattTolbers 3 жыл бұрын

Glass

@alanwalsh3274 3 жыл бұрын

@@MattTolbers nice thanks man

@frightenedrabbitfan 11 ай бұрын

They’re $85 now

@kalilka5697 2 жыл бұрын

I can't find them at Home Depot

@MattTolbers 2 жыл бұрын

I’d try calling a few locations. After gyms closed demand went way up.

@Rafael-ox5ou 3 жыл бұрын

Wait are you 6'1" I'm not sure I got that....😆

@MattTolbers 3 жыл бұрын

Yes sir!

@AaronBishop-st2ow 11 ай бұрын

Assembly by myself was not too hard. I took my time and followed the diagrams. I particularly like the pictures and names of the exercises organized by muscle groups on the front of the kzfaq.infoUgkxKJHyBZ9I1py9vVi-XLpEBg0y-qmdhn3q . Considering the number of exercises it has a relatively small footprint. I needed a machine that was not too tall because I only have 79" headroom in my cabin and this was just over 78". It is easy to use, seems to be well made, and I am pleased with my purchase. I am doing upper body muscles on Monday and Thursday. Lower body exercises are being done on Tuesday and Friday. Not using it on Wednesday, Saturday, and Sunday. I am a reasonably fit 66 year old man and this is a great workout.