Cheap simple bike stands you can make at home

Рет қаралды 163,544

5 жыл бұрын

Though I have a "real" bike stand, I like to use these two simple ones when I don't need something super stable, need to do something that's quick or to wash my bike so that I don't get the commercial stand wet. The materials can be found at any hardware store and they are so simple that instructions are not really needed. Just take a good look at how they are put together and it can easily be figured out.
PVC Snap-saddle: amzn.to/2DYUcEF
If you need something sturdier:
Bikehand Repair Stand: amzn.to/36auvuG
The Heavy Duty version: amzn.to/2XL7Lh1
The Park Tool Stand: amzn.to/2XflVIz
The Sportneer: amzn.to/2ZO4iB1
Floor Stand: amzn.to/2AKNXCN
As an Amazon Associate I earn from qualifying purchases

Пікірлер: 70

@AhmedAdly11 Ай бұрын

I have been searching for nice ideas for a way to elevate my bike for doing odd jobs on it and this wall mounted one is just incredible. I love it to bits and thank you so much for sharing! The floor stand is also just great. I am going to make them both.

@timharrelson7372 5 жыл бұрын

Bravo, this is the best bike repair stand i have seen on KZfaq. Well done Tony.

@TonyHob 5 жыл бұрын

LOL, at least it's cheap

@arumblue1973 3 жыл бұрын

Been watching loads of videos on how to build a bike stand. All good ideas, but this one's simplicity is perfect and effortless! Well done!

@TonyHob 3 жыл бұрын

Thank you!

@fatfinger7436 4 жыл бұрын

If you would have painted that flange white, your wife would never have known it was there! Thanks for the idea👍

@Uri18 3 жыл бұрын

Even if it wasn't cheap, it's simple! Thanks a lot for sharing.

@TonyHob 3 жыл бұрын

I guess "cheap" is relative. That plate that goes on the wall is a bit pricey for what it is.

@lawmat93 4 жыл бұрын

I did two separate searches today about cheap tool set and cheap bike work stand and found your videos very helpful thanks!!!

@downtoridemtb 5 жыл бұрын

Genius! I will be making something very similar except I will make it in a way that it will attach to my bench vice.

@jen3800 4 жыл бұрын

this is by far the best one of all!! Bravo sir !!

@ModernNeandertal 3 жыл бұрын

Thanks for the video. I am going to copy the stand that holds bike by the seat post.

@adamf.8564 4 жыл бұрын

This garage door bike stand:) is awesome :).

@bscu0493 5 жыл бұрын

Good to see some new MTB content! I enjoy you videos on the Diamondbacks. Keep it coming!

@TonyHob 5 жыл бұрын

Thanks, I know the quality is lacking but hopefully the info can be useful to some. thanks again

@gabifernandez7494 4 жыл бұрын

awesome video!! thanks for the help man ill make exactly like this..

@eleudson 3 жыл бұрын

Very nice! Thanks.

@videodobaguio Жыл бұрын

Amazing man! Thanks for sharing!

@1977philc 3 жыл бұрын

Nice simple ideas

@voren_ 4 жыл бұрын

Useful vid!

@TheBongorock 4 жыл бұрын

I was trying to figure out where the hell to mount it then I found your video. Our homes are very similar on the garage and it will work perfectly! Thanks for adding the difference for road bikes or I never would have thought about it till I was going back to replace it. :)

@TXX279 3 жыл бұрын

Excellent 👍

@naldilima6258 4 жыл бұрын

VERY GOOD BOY!

@anangberkah 3 жыл бұрын

Wowwww... Niceeeee

@bigmikefrompa.3063 3 жыл бұрын

Awesome! Like it! I seen this on another channel (MTB Alex) I'm going to make one. Cheap bike repair stand. Thank you for great video!😊👍 Got new sub.

@ansmfella 2 жыл бұрын

Simply the easiest and best looking DIY repair stand I've come across here on KZfaq. Much gratitude for the idea. This is the one for me. Question: how has the PVC elbow held up over many uses? Strong enough over time, or chance of cracking down the road?

@TonyHob 2 жыл бұрын

I didn’t realize it’s been over 2 years! I still use the stand several times a week and no problems. On a curious note, I never glued the elbows at the top of the vertical part. This allows it to “expand” for wider tires and takes some of the stress out. I think it has helped to make it more durable.

@ansmfella 2 жыл бұрын

@@TonyHob awesome man. Again, thanks for sharing and for your time in response. Happy trails and Keep the rubber side down!!

@riffmeisterkl 3 жыл бұрын

I made the pvc stand as well but needed to fill the bottom with sand to stop it falling over.

@TonyHob 3 жыл бұрын

That’s a good idea!

@Energybikesamara 3 ай бұрын

Велосипед должен крепиться за раму, а не за подседельный штырь. Это обеспечит лучшую стабилизацию велосипеда. Держатель рамы должен быть регулируемый для разных размеров рамы и мягким во избежание царапин.

@brianlastname192 4 жыл бұрын

Saw this exact same setup on J.farro's video from 2013.

@TonyHob 4 жыл бұрын

yep, I mention that I saw it on another channel in the video. Just did not remember who at the time

@eyeonart6865 3 жыл бұрын

Clever

@ilyasilyas9704 4 жыл бұрын

That is great. What is that base called that's mounted on the side of the garage?

@TonyHob 4 жыл бұрын

It's a galvanized floor flange, should be available at you local Home Depot or hardware store.

@ilyasilyas9704 4 жыл бұрын

Thanks!

@lucasforbes5596 4 жыл бұрын

What did you use to make the clamp part on the hanging bike stand??

@lucasforbes5596 4 жыл бұрын

What did you use to make the clamp for the bike stand on the garage?

@TonyHob 4 жыл бұрын

It’s called a PVC snap tee, available at hardware stores

@bigmikefrompa.3063 3 жыл бұрын

@@TonyHob I thought you cut it out,that's even easier, lol. Thank you. PVC snap tee,Okie dokie

@carlgneumann6216 2 жыл бұрын

Nice idea, but odd place to install the flange. PVC stand like

@TonyHob 2 жыл бұрын

can't see it on the video but my bikes and tools are right behind that wall. It just makes it convenient.

@leftylou6070 2 жыл бұрын

That PVC fitting you used is called a "T".

@maarcheen 3 жыл бұрын

How long does the pipe need to be to make sure your pedals aren't hitting the garage? I'm thinking at least 18", but if it's too long it might sag or bend.

@TonyHob 3 жыл бұрын

the one I'm using is 12", it clears the pedals.

@maarcheen 3 жыл бұрын

@@TonyHob awesome really appreciate it. This is an awesome hack just what I was looking for. Thank you!!

@nicolehill5348 3 жыл бұрын

Would the pipe tee hold a ebike’s weight 50lb

@TonyHob 3 жыл бұрын

I don’t think the system will hold it. It would probably tear it out off the wall

@kurtbernal3951 3 жыл бұрын

what is the thing that you put in the wall

@TonyHob 3 жыл бұрын

It's a floor flange

@crazyman3431 4 жыл бұрын

Followed all directions and my bike keeps falling over any ideas ? Seems like the pvc pipes are extremely weightless.

@TonyHob 4 жыл бұрын

Johnny Perez you might need to make the outriggers longer. Also make sure they are completely flat. Mine is rather stable but more so if I use the rear wheel.

@crazyman3431 4 жыл бұрын

Tony's Hobbies thks dude I’ll try that!

@jen3800 4 жыл бұрын

subscribed!!

@kurtbernal3951 3 жыл бұрын

what do you call that base

@TonyHob 3 жыл бұрын

Galvanized floor flange

@ioann235 2 жыл бұрын

That door stand might ruin your door coz the frame is made to resist only the Normal use of the door. You can start with a Christmas tree support.

@TonyHob 2 жыл бұрын

After three years it is holding up well

@MaNuLaToROfficial 2 жыл бұрын

that bike looks bad A$$! im jealous!

@TonyHob 2 жыл бұрын

My old DB Atroz Comp. I sold it but was a great bike

@jen3800 4 жыл бұрын

i am posting a link on my webpage ( in development ) for my bike repair biz at bikeguy..ca and all my social media. this is the BEST idea yet for home repair and cleaning! Genius. Elegant Simplicity !!