Once I saw you with the Max 2k clearcoat I knew it would come out great
@PREDATOR07 Жыл бұрын
The best clear coat in a can
@francophysique51927 ай бұрын
I got a turbo can of 4k clear, will it leave my car looking good? 🥺
@unknowmysteries59252 ай бұрын
So no paint? Just clear?
@ccxfrank10923 күн бұрын
Im wondering too @@unknowmysteries5925
@toycoma98Ай бұрын
Mask the entire car, you wont see overspray on the exposed surface but you can feel it, also surrounding vehicles can get overspray. 400 grit is too coarse, 600 to 800 would be good. Mineral spirits is too harsh, use sprayaway glass cleaner (ammonia free) or alcohol. Might as well clear the headlights, but with final 1000 grit.
@jaimerodriguez637415 күн бұрын
I’m a professional body shop guy this is accurate
@user-me3nr6no9p19 сағат бұрын
Absolutely do not clear the headlights 😂
@evs8716 сағат бұрын
You have to UV resistant clear the headlights are sanding or it will fail so quickly @@user-me3nr6no9p
@BjorgenEatinger10 ай бұрын
The most difficult part is the taping.
@slammingbrutaldegeneracy25618 ай бұрын
Honestly
@joseconstante13216 ай бұрын
Do you have to tape
@internetexplorer73036 ай бұрын
@@joseconstante1321 masking tape would be advised so you don't spray your glass by accident
@joseconstante13213 ай бұрын
Can I send it down with 400 grit paper then spray the 2K over it and that's it real question LOL
@Its_about_that_time2 ай бұрын
Nope. its spraying without getting it to drip.
@shaneintegra Жыл бұрын
Wetsand the clearcoat with a high grit, then buff it all out n it'll look good
@brandonsantillan6336 Жыл бұрын
Wym buff it out how do you do that
@self-madejacobo8281 Жыл бұрын
@@brandonsantillan6336you can use really high grit sandpaper or a compound that shops sell to make it smooth
@evemito11 ай бұрын
Thanks 4 this comment
@mcskittlez615910 ай бұрын
@@self-madejacobo8281what compound?
@fistfirst73559 ай бұрын
@@brandonsantillan6336buffing means polishing
@furtalance_xАй бұрын
Awesome. Only sanding and clear coat. Fantastic. Dude
@seniorxj2931 Жыл бұрын
I use the same clear. Best clear coat in a spray can for sure!
@krashdown102 Жыл бұрын
Beats a full respray
@flyinghighlm839110 ай бұрын
I've used 2k clear on several older vehicles. It surely qualifies as good enough. Trick I learned was heavier coats are better than light ones. Looks good from 20ft but most importantly stops the clear coat peel from spreading :)
@eDriftingAway9 ай бұрын
So my roof is dirty and crusty. How do I clean it the best to look at the clear coat that is left?
@joseconstante13213 ай бұрын
So wash my car let it dry use 400 grit paper then use 2K and spray it on there and that's it
@senorbonbonАй бұрын
@@joseconstante1321did you come up with the solution
@senorbonbonАй бұрын
@@joseconstante1321did you find out the answer
@HappyCave-tq9nr26 күн бұрын
The longevity of this finish? I'm guessing 18 months? The problem is that, if not removed completely, the failing clearcoat underneath the newly applied clearcoat exemplifies that old Jewish proverb: If you build your house on sand... 😅
@rikityrik9 ай бұрын
I really don’t think there’s anything wrong with doing it this way. I used to work in a RV paint and body shop and we did it for customers from time to time. If the paint is in pretty good condition go for it. Your project turned out awesome!👍
@HeartTurnedToStoneАй бұрын
Looks great! After seeing your results, I'm going to try this on my BMW. Glad you said it took 2 cans - I would have only bought 1.
@MarlonBrndoКүн бұрын
You did hear this was "not the right way to do it"
@talking_tree_0451 Жыл бұрын
I actually thought about this in my sleep the other day I’m glad you made a video on this it like tickles my brain
@APerez8911 ай бұрын
Tickle deez
@TonyYesi11 ай бұрын
@@APerez89nutz
@TopVillain Жыл бұрын
Honda is notorious for this issue and they have done nothing to fix
@147dad Жыл бұрын
Dude my clear coat is chipping away on the front bumper , I’ve been pretending I don’t see it 😂
@dannymiller718711 ай бұрын
@@147dadget one of those leather bumper/hood covers cars used to rock them all the time in the 90’s and early 2000’s my cousins 94 mustang had a real sweet leather bra on it. Make that shit cool Again I’ll follow your lead.
@147dad11 ай бұрын
@@dannymiller7187 well unfortunately my Honda was totaled 😫, drunk driver ran a red , I no longer have a clear coat issue 😂😂
@smooth_ops294210 ай бұрын
@@147dadI do the same with my wife... 3 months now and im single. Still not sure who these kids are and why their calling me daddy though...
@147dad10 ай бұрын
@@smooth_ops2942lmao I’m supposed to be “babysitting” my brothers kids I’ve been hiding in the restroom for the last 30 minutes idk who these kids are 😂
@Wizkid4903 ай бұрын
Just be careful with that 2K clear. Super dangerous stuff. Technically, you should have an forced air mask, but at a MINIMUM, you should be using that outdoors or in a VERY well ventilated area with a respirator and paint cartridges.
@Forgiveusall014 ай бұрын
So you just sanded and clear coat... No paint?
@bfisher982610 ай бұрын
It even made the faded spots look good
@lexWest6122 ай бұрын
Thanks boss! After doing this I should have no problem selling this old civic.
@PastaIsNotNoodles2 ай бұрын
For cars that are renowned for being reliable, they have terrible paint. My civic’s lacquer is peeling on the rear tailgate.
@sele509 Жыл бұрын
I just came for the comments, lol. But to be fair, he did say it wasn’t the right way and just an experiment. So disclaimer there! 😊
@Dassick89Ай бұрын
The reason people dont do this is that the clear and base a bonded together when sprayed. Doing this means that the weak point is the base. Sure it works and it should last a while, but how long it lasts will be how good the bas coat is that you sprayed it to. Ive debated doing this because all my vehicles have this problem. But eventually ill just respray the whole thing in a single stage paint with some hardener from tractor supply for $100. Car paint is insanely priced now adays. From the prep to labor to the actual paint cost. Ill go with a tractor paint lol.
@DonsGreenNature2 ай бұрын
thank you lewis starting my paint project soon
@Boom-eo8htАй бұрын
Sanding by hand is crazy but more power to ya lol
@Sinsirink3 күн бұрын
It's not
@balentincamargo52484 ай бұрын
Are you repainting and clearing or just clearcoating
@KenzertYT2 ай бұрын
The clear under the new clear will continue to delaminate or fail but this works for a year or two or more, and it’s cheap, so fuck it lol
@whatugonnadu2 ай бұрын
If a proper prep and good 2k clear is used, it will not continue to peel. The new clear will provide the proper u.v. protection to prevent further failures.
@senorbonbonАй бұрын
@@whatugonnaduhey man, any tips? So do I first wash the car, then wet sand it with 800 gritt first, then use 1500 gritt , then tack rag , then 2 coats do clear coat?
@whatugonnaduАй бұрын
@@senorbonbon that pretty much covers it.
@senorbonbonАй бұрын
@@whatugonnadu would 800 gritt then 1500gritt be better than, 400gritt to 800gritt?
@whatugonnaduАй бұрын
@@senorbonbon depends on how bad the clear is. 600-800 to start to level it, 1500-2000 to smooth it out and remove the sanding marks.
@jewelofbeautyАй бұрын
Is there a full step by step video?
@DNOJ Жыл бұрын
That’s way better than where it was !
@sbe0001 Жыл бұрын
“I’m gonna teach you to fix your car, this ain’t the correct way just an experiment” wtf
I'm giving him the still made it work seal of approval. 👍 So many cars on the road are much worse condition than this and many auto body shops just spray on eurethane coats and wheel buff it down anyway. 😂
@garygarner4822 ай бұрын
I like single stage, with multiple colors., it's a lot of work, but the paint doesn't peel, 🎉🎉 it's awesome.
@chassnowden6496Ай бұрын
How long did this last? Especially without matching paint.
@jeremylarson7506 Жыл бұрын
Fantastic job bro!
@WillFull_Truth8 ай бұрын
All right you convinced me 2kis the way
@backintogear90715 ай бұрын
Members only jacket lol. I'm barely old enough to remember that
@soulheaven924322 күн бұрын
crazy part is, Members Only still makes nice jackets
@slimsherman581822 күн бұрын
He's the last Member 😅
@Mr_Gabbles9 ай бұрын
I’m bout to do my whole ‘02 accord like this. Won’t be perfect but it already ain’t perfect sooo
@fattireale7520 күн бұрын
Once I saw the Members Only jacket, I knew it would come out great.
@corypalmieri75082 ай бұрын
Aren’t you supposed to avoid the 2K from hitting your skin?
@lx11alex2 ай бұрын
This is a cheap fix on a cheap car. Do not do this on a car you care about. Also don't use mineral spirits use wax and grease remover.
@whatugonnadu2 ай бұрын
Please....go check out channels with professional auto painters. Most of them have videos of how to do this simple fix properly and affordably at home
@urbansolis2 ай бұрын
Please let me know what channels those are. Need to watch them asap
@jonathanlong73752 ай бұрын
@@urbansolis I would watch somebody like Paint Society he’s had some really informative videos on these type of diy paint jobs
@sk8erdude3216 Жыл бұрын
You clean with wax and grease remover or rubbing alcohol. Not mineral spirits.
@outlandishbottle9279 Жыл бұрын
Isn't mineral spirits just for bare metal?
@FarikoPacer Жыл бұрын
@@outlandishbottle9279mineral spirits is like a baby version of lacquer thinner.
@joshuameldru4004Ай бұрын
Mineral spirits will leave a residue that will allow for fish eyes to appear
@toycoma98Ай бұрын
or ammonia free sprayaway glass cleaner
@The1Music2MyEars2 ай бұрын
So many DIY guys say it's easy, and then break out the 2k. You need a face shield respirator for something as poisoning as that. That no longer makes it as easy as these vids are saying
@ajhamm20209 сағат бұрын
What is it that makes it so toxic? Is it too dangerous to use a cartridge respirator outdoors?
@IsaacMendoza0301 Жыл бұрын
Dam that’s real nice I’m gonna have to do that soon
@thegman4759 Жыл бұрын
That still looks great I'll have try this on my truck roof noone will see it anyways
@notorious_4043 Жыл бұрын
you could go down even to a 160-200 grit for the clear removal, maybe even down to 120 grit. And for home paint jobs, using low pressure air (40-60 psi) you can blow off the car in between coats to help minimize the dust trapped on the surface to cut down on the cut and buff at the end
@Fhwgads11 Жыл бұрын
That’s pretty aggressive, you’d have to come back up to 400 (ideally more like 800) unless you want sand scratches all throughout your clear. The risk of going through the exposed paint would be way too high if all you want to do is just re-clear
@NjBoriG35 Жыл бұрын
120 is crazy
@bubahercsooshhercules42923 ай бұрын
400 is the lowest I’d go tbh
@toycoma98Ай бұрын
120grit, you are insane
@soulheaven924322 күн бұрын
400 is close enough..I go 600 grit at most
@alexdyess5143 Жыл бұрын
It looks good but the dry sanding with such a rough grit is scary, could’ve took too much off
@asliozgulgokdemir72254 ай бұрын
U didn’t use any paint right ? Just a clear coat?
@johnny076525 ай бұрын
Thank you! I have a 2005 Acura which is in pretty good shape except the clearcoat and I don't want to pour a lot of time or work into it because with 215K miles and at almost 20 years old I don't plan on keeping it much longer so a fix like this is good to make it look good for the rest of its realistic life (the interior has irreversible damage like cracked dash and perforated seats that are tearing between perforations)
@mustang.3 ай бұрын
Have a 2007 Camry and trust me. My interior was worse than you could imagine happen aftwr what monstrosity you already described. Google Toyota cheap interior issue on 2007-2010 Camry and Lexus if you want to know. The dashboard would melt and stick to your hands. I got it fixed by going to one of those car seat and upholstery shops, they put a faux leather same color as my dashboard and now my dash looks brand new. The upholstery all over the car got changed as well and it looks brand new. Now was thinking to get the car poloshed but wanted to paint clear coat, which the paint shop duped me out of by claiming he will do it all, but did a bad job of polishing ( no wet sanding, just polished portions of the car and then shampooed and slightly waxed)
@brbert0211 ай бұрын
You could put a couplenlayers of base on before the clear because judgingbby how much clear was missing the base had probable started fading too, but thats not bad if someone just wants an improvement and notba perfect paint job, do you know how well its held up?
@miqhxelvАй бұрын
Painting over 400 is crazy
@liiita6981 Жыл бұрын
Ohhh so he's a painter too niiiiiiice
@ambientsounds141611 ай бұрын
It came out super hazy, because the rattle has not got enough preasure and any kind of wind would cause oversprays. Can you show the after cut and polish?
@wetuhtang701911 ай бұрын
Think u forgot the most important, (wet sanding)
@m_recon5092 Жыл бұрын
So after you use sand paper ,you clean the area and then just use clear coat?
@josiahshane3339 Жыл бұрын
So brother all You did was re apply clear coat? No paint and it turned out that good? That’s sweet man thank you !! Have a car similar color and condition have you had any issues since you did it? How’s it turn out after buffing?
@godalmightyismysavior197 Жыл бұрын
It’s probably cause the area he sanded wasn’t through the base coat went through just some clear coat
@gustavrodriguez9109 ай бұрын
@@godalmightyismysavior197Is that ideal?
@tossedsalad5532Ай бұрын
Great job
@georgeyoung6132 ай бұрын
Great results. I ordered the same 2k clear coat almost a year ago. I have just been debating myself on how to prep the car. Thank you for the video. It gave me the push I needed to jump in. Much respect 🙏 🫡.
@AlrightMykol5 ай бұрын
By paint do you mean using actual paint or just clear coating it?
@brianadams874810 ай бұрын
So you sprayed right on top of the clear coat oxidation?
@APerez8911 ай бұрын
Good shit Luis! You made me feel confident in doing it. I jusy got done using some mcguires conpound shit but i can still see the oxi marks so maybe ill do this in a few months. I was worried about doing this wrong and drips and unglossed surfaces as i did with desk top several days ago. Lol
@Carnage488 Жыл бұрын
Give me an excellent idea 😂 but how long did it last ?
@senorbonbonАй бұрын
Any answers?
@jcel5870 Жыл бұрын
Thx for the advice my truck needs this. Gonna attempt this
@adamjlogeren6628 Жыл бұрын
How’d it go?
@jcel5870 Жыл бұрын
@@adamjlogeren6628 got most of my materials just waiting for the wind to stop, since I only have a car port. I Wana out up some tarps to help with the wind but the wind has been nasty lately
@ImLvgging Жыл бұрын
any update?
@DumpsterFien11 ай бұрын
If you do this do yourself a favor and wet sand with high grit wet sandpaper. Like 1 or 2 thousand grit. 400 is a bit harsh.
@LJC58655 ай бұрын
For painting or window tint... IT WILL BE WINDY THAT DAY PLUS 2 MORE. SONOVAMFRRRRRRRARGH
@1995RangeRover Жыл бұрын
Good results!
@ralphjackson630911 ай бұрын
You should really be adding plastic at the bottom to at least protect the unmasked areas from overspray, other than that, nothing beats that 2k aerosol clear!
@rikutakahashi43817 ай бұрын
Did he duplicolor then clear or did he just clear it?
@wagwanyute6 ай бұрын
Doesn't mineral spirit leave residue?
@holdenbaldassi36974 ай бұрын
All it needs now is a good cut and polish and coating and it would look mint.
@jacobshank936210 ай бұрын
I would definitely get a plastic car cover for the car, cut out what you’re spraying and tape edges again. Otherwise you risk overspray on your other panels, plastic
@nollieflip111 ай бұрын
Just did this and you left out the painting part before doing the clear coat. Now it looks like I sanded the shit and then did just clearcoat. It looks terrible.
@kolejim90169 ай бұрын
😂
@raffikkiz3 ай бұрын
Went too hard with the sanding or your paint is too far gone. He didn't paint it. Only clear coat.
@NoLongo4 ай бұрын
2k is the real deal and dangerous because of it. Full respirator like in the vid, minimum.
@Gnik41447 ай бұрын
I just plastidipped my accord back in the day when the roof was bad lol nice video though
@StevenGbuh16 күн бұрын
How has it held up? Been thinking about doing this to my hood and roof
@DestinyA832 ай бұрын
How long does it take before it starts to wear??
@baddonkey755 ай бұрын
My oaint chipped down to the netal so i have to fill it after sanding and smooth then do paint process. Any tips for filling 😊
@bramoldenziel6373Ай бұрын
You said primer paint clearcoat. But it looks like you just removed the clearcoat, cleaned it and resprayed it with clearcoat. Is that right or did you remove some steps in your process? Would like to try the same thing!
@therealsolo23 Жыл бұрын
It’s better than what it was. It’s actually what i was thinking of doing just haven’t had time since ive been lazy. And who cares no one is gonna look at the top part anyways
@EsotericHashira3 ай бұрын
I respect it
@Bonked_YT Жыл бұрын
pretty
@anthonygallo6417Ай бұрын
I like to use if it’s not sun faded like that and just little scratches or some overspray or something I just wet sand, clean it up and then clear it
@Heartsanime7 ай бұрын
Didn't the sanding leave scratch marks on the parts where there was almost no clear coat left?
@juanchavez98362 ай бұрын
Go ahead and buff it lol
@firstname-qq3xp6 ай бұрын
how is this turning out long term now?
@kioop25944 күн бұрын
Wait sorry this may be dumb but when he says painting he means with the clear coat correct? Or is he actually painting the vehicle with a blue color. Sorry if that sounds eumv
@ianl56692 ай бұрын
Every real body guy is laughing there ass off
@tgw23018 сағат бұрын
Should’ve shown us after the buffing
@spookyduzit2 ай бұрын
You made it happen though. Nice work
@brightkreations13007 ай бұрын
mmmm 🤔 did you use an oil remover or cleaner after the mineral spirits!! then use a micro cloth.. then use the clear coat???
@brandonwebb77719 ай бұрын
good job
@sneakerempire6306 Жыл бұрын
How many coats did you put
@christopherwright68148 ай бұрын
You should be using denatured alcohol to clean not mineral spirits. Mineral spirits is for cleaning after using oil based paints. It will leave a residue behind on the surface when used the way you used it here
@jsavoy1 Жыл бұрын
I need to do mine also. How many cans did you use?
@3n3ly7m9 Жыл бұрын
He said 2 cans
@New-Breed-Drywall-And-Paint6 күн бұрын
You sanded and then put a clear coat without painting and it looks like that now ?
@Lightsoutaustin2 ай бұрын
That overspray must look horrible
@elchinolas7778 ай бұрын
I don’t see the paint spray you use for this ?
@Nathank9277 ай бұрын
I’m sure that there’s over spray all over the car 😓cover the vehicle
@bayfinest19384 ай бұрын
Did you paint the top first or just clear coat ?
@balentincamargo52484 ай бұрын
Thats what im thinking
@gewfoneАй бұрын
Just sand and clear coat
@bayfinest1938Ай бұрын
@@gewfone thanks buddy
@EnriqueHernandez-qt9pp7 ай бұрын
I Didn't understand, did you paint with actually blue paint or just sand and clean it and then just apply the clear coat? Am I right cause i have the same problem in my car so I'd like to fix it myself
@joseconstante13216 ай бұрын
That's what I got but I think when he said he painted it he means he sprayed the clear coat
@baddonkey755 ай бұрын
Finna do this to my whole car
@klejdirusta36435 ай бұрын
I don’t get it, so you just sanded and then clear coat no paint at all?
@keithf79766 ай бұрын
Follow up the 400 grit with 600 grit
@hakman239 Жыл бұрын
Wet sanding to fix the roof then buff
@ricebowlasmr Жыл бұрын
i’m gonna use black car paint on mine today and see how that goes. it obviously won’t be as nice but the clear coat is so bad that i don’t have the time to sand it all off
@Arraxis Жыл бұрын
Spraying black paint on messed up clear coat? That will be a disaster...
@ricebowlasmr Жыл бұрын
@@Arraxis it worked out great actually
@NjBoriG35 Жыл бұрын
I have a black car too did u sand first or add clear
@altairtheeagle Жыл бұрын
Lol hermano, man this was brave. Sand it down with 800 grit and water with a block, less scratches to fill for a smoother surface but it’s not a repair that will hold or look great
@jasonfranks10966 ай бұрын
That’s. Great airesol clear
@MyRcGoSlow Жыл бұрын
How much was the 2k ?
@seniorxj2931 Жыл бұрын
There about 24 bucks on Amazon. It's literally the best clear coat in a spray can.