The CHEAPEST Way to Permanently Fix Peeling Paint!

Рет қаралды 1,272,384

3 жыл бұрын

Welcome to the #1 Video on how to fix your peeling and fading paint on your car. DISCLAIMER: No fancy tools needed to complete this job! In this video we paired up with Paintscratch.com to bring you professional paint packaged up in a easy to use spray can. This guide will take you through the very basic steps of sanding down your faded paint, repairing it and then returning it to the original shine it had when it rolled off the factory line!
TO SUPPORT THE CHANNEL AND PURCHASE MERCH: paintsociety.bigcartel.com/
To share your project or ask questions please join our facebook group: / 440942309941585
Instagram: paint.society
Visit paintscratch.com for any of your paint needs for your car. I recommend at least 1 can of primer per panel, 2 cans of basecoat per panel and 1 can of clearcoat per panel. It is best to have extra because not all colors cover as easy.
Clearcoat: amzn.to/3qlJkmH
Sandpaper:
Faded Paint Job Pak: amzn.to/2Ov1llb
Clearcoat Sanding for buffing Job Pak: amzn.to/2MQ7OXA
Yellow Hand Sanding Block: amzn.to/3sUQtMI
Gray Scuff Pad: amzn.to/3pyzwoW
Buffing:
Buffer: amzn.to/3qEpKmh
CSI Polishing Kit: amzn.to/3rCrSeK
Other Products used in the video:
Kovax Dry Guide Coat: amzn.to/2ZWzyws
Eastwood Guide Coat: amzn.to/3rq6mKs
3M Respirator: amzn.to/3cHjVkq
Paint Suite: amzn.to/3sSs3TL
3M Plastic: amzn.to/2MAdF2B
Automotive 1.5 Tape: amzn.to/2YjKWlo
Wax and Grease Remover: amzn.to/39TsYeK
Water Based Cleaner: amzn.to/3tNbERZ
Tack Rag: amzn.to/3bYWC5g
Bulldog Prep and Clean: amzn.to/3ciS8X3

Пікірлер: 801

@Munky332 3 жыл бұрын

Dunno why, but I prefer these at-home in your own garage paints more than the ones in the big booths with the complex gear. I guess its because I'm more of a DIY guy and seeing this kind of stuff helps me see it from how a professional painter would "attack" a project like this and how they think about it, versus how I would think about it.

@analazcano6475 Жыл бұрын

And to oeave your car in there for 2 to. 3 weeks, and they may even drive your vehicle huge no no

@catsmeow5566 Жыл бұрын

It came out better than a "professional" job on a vehicle that my insurance covered. The body shop left me with orange peel texture on the paint & took 2 months to get it back to me.

@250r6 Жыл бұрын

I never really knew much about auto body work i always saw it as a really difficult project that the average joe in his garage could not achieve like a professional paint shop but these videos give me a bit of confidence and makes me want to try it out myself also really satisfying to watch

@MTLJack 3 ай бұрын

the thing is , those big booths allows to paint wider, whole car and bigger areas. Way better ventilation and paint dusts extraction. You can't say 'at-home' is better than big booths lol , thats just too immature. When you paint at home, your whole house inside is exposed to the paint dusts as well. If you smell the paint spray, you breath it.

@Munky332 3 ай бұрын

@@MTLJack Did I say it was *better* in any context above? I said I preferred a vid where a dude who does this day in and day out can look at a project and say "here's how we're going to approach this and get good enough results that can be replicated by DIY'ers at home" I understand the detriments of painting at home, I've done it five times now on entire vehicles, and several other times on smaller parts.

@Pillzb3rry 3 жыл бұрын

I appreciate you doing these "spray can Jobs" because it motivates me to do them. Please do more!

@wiggitywhitefox 3 жыл бұрын

For real tho been talking about rattling my 88 d21 work beast but this is helping even more

@buakawfan333 3 жыл бұрын

I had a crushed wing panel, quoted £300 minimum to get it replaced. Got my own panel for £60 and lets say about £60 on paint, primer, lacquer, tac cloths, sanding pads and rubbing compound. I won't include all the tools haha I had to get a torque wrench, socket set and ratchet, spanners. But those things I needed anyway and will be used for all sorts of things in the future. All sorted, looks great and I learned a lot about the process. It did take a bit of time though. One thing I would recommend to anyone is when sanding, use a sanding sponge as it's more flexible and soft, not the paper which is tougher and has pressure spots. Also, don't give up, learn as you go and adapt what you do.

@FindShindoHere 3 жыл бұрын

@@buakawfan333 j

@coryjackson6034 Жыл бұрын

@PutOnTheGlasses thanks good prep talk you just talked me into it 😃

@johnburch6927 2 жыл бұрын

I am still amazed at how well the 2k clears flow out, and the gloss/finish is absolutely incredible as a result. Imagine, out of a rattle can.

@docz3ro231 2 жыл бұрын

I've been using it on a 91 F-150 that I'm working on and it's legit. I'll never use another clear coat.

@Aikaramba12 Жыл бұрын

@@docz3ro231 what kind of respirator do you use?

@mule666 Жыл бұрын

@@Aikaramba12 come on man

@flyingsodwai1382 9 ай бұрын

Looked good enough to me that I would consider doing a whole car.

@jewelleryaddict 7 ай бұрын

I recency did our outdoor patio furniture was so surprised it came out so well. Love spray painting have been doing for years but the new products are the best, less problems then the older sprays. .

@vyseerx 2 ай бұрын

Brian is a PhD in painting. He is a super good guy. He is a great teacher as well. Thanks Brian for all you do. I get the feeling that had he not chosen painting, he would have been a philanthropist/ professor ! Have a blessed day Brian !!👍👍

@mgmaier75 2 жыл бұрын

I can't tell you how much I love watching your videos over and over and over and over.Great Rattle can finish!!

@Seeeeyaaaa 3 жыл бұрын

Brian you're an absolute gem mate, one of the best Pro/Diy paint guys on KZfaq. Fantastic Channel!

@michaelpuente3352 2 жыл бұрын

“Your hands are your best friends” - this man ain’t never tell a lie

@elelegidosf9707 Жыл бұрын

Especially when you're a single man

@harrynazarian3184 3 жыл бұрын

Daaaaamn, see I love it when you show off your rattle can skills because I connect with you as a DIY'er. Money has been a bit tight because of COVID and all, so I can't go out and get a paint gun, water filters, and a proper compressor. But when you do videos like this, I am floored at the amazing end product. Thank you so much for this video. Absolutely gorgeous.

@DonBMW 3 жыл бұрын

Wish I had homies like this dude! As always great work. No one even comes close and with spray cans. Totally doing this.

@ashshahzad6773 3 жыл бұрын

Really loving this home series. These tutorials are so helpful and realistic. Great job buddy as always! 👍

@philtucker1224 2 жыл бұрын

Brian that car looks so good and it’s just the sort of job I would tackle for my kids and their family cars. I’ve been doing little repair jobs on family cars for 40 years now but I’ve learnt so much more in the last few years following you! Thank you buddy!

@derekcook499 3 жыл бұрын

Thank you for making these videos. Ive been able to make my cheap honda civic look so much better on a tight budget and boosted my confidence doing body work

@cadejohnson4799 3 жыл бұрын

Thank you for all your work and information. I always loved painting before, without knowing some important steps. You have stepped MY painting game up. My project is a 95 Chevy Impala going back to gloss black

@samt3306 3 жыл бұрын

This is exactly the video I needed! The cab of my S10 is 50% peeling clearcoat. I'm happy to see a DIY process that could make it more presentable! Fantastic job as always!

@PaintSociety 3 жыл бұрын

Thanks !!

@D9412G 3 жыл бұрын

Your an excellent teacher Brian! You clearly explain each step of the process. Keep the videos coming!

@meepmonster750 Жыл бұрын

Dad?

@ronaldbartlett898 3 жыл бұрын

Fantastic results as always from you Brian. You explain everything so well with your knowledgeable experience. Only through your expert advice was I prepared to even consider attempting to respraying parts of my car with metallic paint, covering previous owners respraying shrinkage marks. I’m well pleased with my results now. Thanks a million!

@GarageNoise 3 жыл бұрын

Great video Brian! I'm impressed with how well the clear laid down out of an Aerosol can.

@nilebrixton8436 Жыл бұрын

I've been putting off on repairing and retouching the paint job of my 15 yrs old car. this video shows I can do it with limited tools. I appreciate the step by step instructions.

@Ruffianthystoic 7 ай бұрын

As a used car dealer you've helped me so much getting ish done. Thank you !

@PaintSociety 7 ай бұрын

Awesome!

@legitjay4021 2 жыл бұрын

Awesome! my car was recently stolen & sprayed black so I gave up on fixing the paint but now after watching your video I got some motivation to fix it!

@eyesalooking Жыл бұрын

This is the most helpful video for the step-by-step DIY video that I have watched. We only have a hood to do that has lifted clear coat, so this is the video I needed to see.

@meejmuas8686 2 жыл бұрын

Thanks for dropping all of the paint knowledge. Greatly appreciated

@msvideos234 2 жыл бұрын

YES!!! finally something doable for minor fixes. thanks, dude!

@alexscruggs8792 2 жыл бұрын

Hey Brian, How are you doing today? Your channel is a great help to me. I’m trying to get back in to painting but I’m doing more mechanic work that ever. Thanks for the tips!

@stendecstretcher5678 2 жыл бұрын

Thank you for making these videos. I've been able to make my old Toyota Corolla look so much better on a tight budget and boosted my confidence doing body work.

@markadoss6705 Жыл бұрын

Enjoy watching DIY at home. Keep these videos coming! Even explaining everything is key! Rite on !!!😊😊

@brendanmatthys3788 3 жыл бұрын

That's honestly such a close colour match! I almost can't believe that wasn't blended! With a cut and polish on the rest of the car (maybe a flowcoat on the rear bumpter) that civic can look brand new

@user-dd9og1qk1c 2 ай бұрын

Your video is still helping people 3 years later! Great teacher..me as a student not so much. Would love a follow up on how to fix things like uneven basecoats and rough appearances. 🙃 Totally messed up and clear coated over it…and now I get to look at it under a protective layer..smh..beginner mistakes for sure.

@popejbryant 3 жыл бұрын

I just bought paint scratch products to repaint my engine bay. Glad to see y'all using them

@gerardofollano8417 Жыл бұрын

Amazing results from a can, prep work is everything.

@ericpecana5529 Жыл бұрын

Thank you so much to show us your talent and technique to paint a cars special with rattle cans for DIY. As a newbie for painting a cars such a bit scary to be mistake. But now got a confidence to do it.. And just like you said " don't over think it, it's just a paint" thank you 😊

@MegaSunRise3 3 жыл бұрын

Wow, that was a really impressive result! Out of a spray can... I wouldn't believe it if I hadn't seen the process

@gergemall Жыл бұрын

Wonderful video, you are a wonderful instructor . I appreciate your tutorial. I liked the saying ‘ don’t over think it , it’s just paint ‘ BRAVO . BEST VIDEO FOR THIS ON KZfaq.

@santosrodas3174 3 жыл бұрын

Amazing, keep up with the good work brother. Congratulations for everything that you do.

@MrMurph111 3 жыл бұрын

Paintwork is not easy to get it right and you make it look so easy. Thanks for all the tips and tricks for us layman.

@chrischeezer 3 жыл бұрын

wow... great job with that clear coat. I painted my whole car in my garage with cans as well. Great video.

@DuckDiggler 2 жыл бұрын

How'd it turn out?

@KeithSWD 2 жыл бұрын

I have a black colour Chrysler/Dodge Neon 2005 2.0L with a similar problem! Though, i just cannot find "Perfect Match" spray cans here in Cape Town, unfortunately. But after having watch your videos, I am now motivated and/or confident i can do this too with any quality spray paints i can get around. "Don't overthink it, it's just paint!"

@antonychadburn1404 Жыл бұрын

Absolutely brilliant guidance and advice. Keep up the good work.

@lilwank9602 11 ай бұрын

just did this on my 2007 Acura TL Type-S in Kinetic Blue pearl. My rear bumpers clear coat was so shot. Looks brand new! Paint Scratch got a perfect color match

@on-site4094 2 жыл бұрын

Your wisdom and experience is very educational & useful thanks for keeping it simple

@reydogmotor 2 жыл бұрын

Excellent video on how to not over think it…😎. I on the other hand am afraid of starting something that won’t come out as good but I’m pretty sure it will look much better than my old ugly faded paint on my 1994 red mustang. The main reason I don’t drive it is how it looks. I feel comfortable stepping up to paint it myself, thanks and keep the videos coming. You have a great way of teaching, short and direct.

@jimmorris8966 5 ай бұрын

Brian; I do not commit very often but you are very impressive. I try to stop video and write down needed information (paint, sand paper to use) an 1:02 second was said WoW a lot of notes and then you compiled it all at the end of the video. After watching you makes me feel I could paint a whole Chev S 10, out of a spray can.

@trollmanrs 2 жыл бұрын

WOW what a difference with just rattle cans. Been watching a number of your video's in prep for doing some paint & clear touch ups on my daughters red Alfa Mito. Keep up the good work. subbed from England :-)

@Pallidus_Rider 3 жыл бұрын

Videos just keep getting better. Love this series 👍

@yourhandlehere1 2 жыл бұрын

Rollas! I've been driving a '68 for about 34 years now. Needs a lot of "pretty" work, missing a few things. It's been an awesome little car/micro hot rod/trail runner, racing atv's through the woods, powerline roads, road trips, it can haul a trailer...hell I even drug a broke down roll-back wrecker across a parking lot one day. Hauled a long wheel base full sized Chevy truck on a homemade trailer about 75 miles (that was fun, and by fun I mean scary as hell, weighed 3 times more than the car). It's all 60'd out right now, flat black, fat 4 spoke Crager's on back, skinny stock on front, traction bars. Everything aluminum on the engine is polished except the head, polished brass radiator top. It's like, oh look at that worn out old car...but when you open the hood you hear angels singing.

@jmemixx Жыл бұрын

Seems too hard I’m just gonna torch it for insurance money 😃

@clarkkent4991 Жыл бұрын

Every time I watch one of your vids I get more and more excited to try to paint my 1987 Nissan 300ZX!!!🏆🏆🏆🏆

@myleshansel7950 3 жыл бұрын

Great video, I have learned so much from you're videos as I repair my dually fender.

@frankgomezjr7520 11 күн бұрын

Great job as always my brotha 🎉

@furtalance_x Күн бұрын

That was excellent work man..

@Work_G 3 жыл бұрын

Sometimes even when you have access to air compressor air spray gun for small jobs just easier to take spray can! Great results!

@Ashroyer86 Жыл бұрын

One of the best paint channels on the tube.

@TheMightybasstone Жыл бұрын

i didnt think you could put primer over clear coat..... I needed this info THANK YOU!!!

@EyeAmWhoEyeAm 27 күн бұрын

Brother hands down the most best can spray job i have ever seen job well done 👌👍👏👏👏👏👏🙏💜☮️🕊️🕯️🌟✨

@francoissaintine5161 Жыл бұрын

At some point, I am going to do this in my car ( Chevrolet Traverse 2015). Lately, I started noticing osmotic blistering gradually began to form on the hood paint. May God bless you ! This will definitely save me so much money if I apply these skills.

@adellantte3755 3 жыл бұрын

Got the same problem with my car clear is peeling off.Now it's time to sort things out.Thx Brian amazing job again!

@mikedodd9294 Жыл бұрын

love these videos! Using your techniques just did my 2014 Porsche bumper cover in Guards Red (easy solid color) bumper with 3 cans of base and 3 cans of 2k clear, looks perfect. Granted I already own a rotary buffer, DA polisher, and years of 3M sandpaper. Doesn't have to be a beater to use these techniques.

@chrisrobles2012 3 жыл бұрын

I thought it came out just fine without the buffing job. Great job from a spray can .

@itchy7727 5 ай бұрын

Good job Man ! Helping the working class !

@TRUKER96 Жыл бұрын

Just received everything I ordered from your links to fix the peeling clear on my wife’s car

@piggawigga4929 Жыл бұрын

Thanks for posting videos like this saves thousands of dollars.

@johnf6267 Жыл бұрын

Best instructor on you tube for the DYI.

@DesiJattUk 3 жыл бұрын

Wow awesome job bro with spray can I learned something new today thanks for sharing

@jasonchristopher2977 8 ай бұрын

IDC what anybody says, being able to paint a car with rattle cans and have a gr8 finish like this takes talent. I've seen some untalented jobs that u can just tell they didn't do prep work at all. Just scuff and spray. I get its not a new or million dollar car but we can do a decent job no matter what. Thanks man. Gr8 job

@MrJoebiz24 3 жыл бұрын

Incredibly concise and detailed video. I'm stocked up on elbow grease. The car is next. Thank you! (Oh, and subbed).

@mikeammargon6847 3 жыл бұрын

Thanks for the videos and the inspiration... im gonna try to temp fix my car until I do a complete paint job.. keep up the great work

@robinmuster4695 8 ай бұрын

Your paint skills are amazing!!

@aprilgates4937 2 жыл бұрын

Wow! Great job. Looks fantastic

@chronoszeus9267 3 жыл бұрын

Brian, The Spray Paint Master! Wow!

@Snicker60515 2 жыл бұрын

I wanna do the roof of my car like this. And the clear is just beginning to fail in 4 separate spots, so it shouldn't be too much of a hassle to get it looking nice again. I wanna get my paint to the point where it'd be worth it to do a professional grade coating on it and all I really need to make it better is the roof and the front and rear bumpers. Thank you Brian for sharing your technique!

@ScooterBlia2 2 жыл бұрын

I recently picked up a 2002 WRX as a daily beater car. The roof is entirely clearcoat peeled and there are some dings and dents. While I'd love to clean up the car professionally, there's so much deferred maintenance that it doesn't make financial sense to dump money into a professional body/paint job. Absolutely enjoy these videos and going to take on fixing some of the imperfections yself.

@bigmikez3128 3 жыл бұрын

Loving these videos bro and the civic is coming out real nice man!

@jamesbracy7809 Жыл бұрын

Thanks for sharing your expertise on this issue.

@GoneUnder 3 жыл бұрын

Awesome job! Thank you for all the help touching my old Tacoma.

@paulmc9314 3 жыл бұрын

Dude I did 2 years learning panel beating in college. They do not include painting in UK in these courses it's one or the other. Your videos are insanely good very detailed if lecturers could teach only half as good as you do on here there would be much better techs out there. One video I would love to see is painting outdoors a lot of people myself included don't have a unit or a garage big enough to paint in. So it comes down to picking your day carefully or using pop up shelter. Great video dude

@twinturbobmw535xi7 Ай бұрын

This is also my problem , not having a garage or anywhere to Mimic a “paint booth”. My only option is doing it on a day when there’s hardly any wind. Lol.

@MrsUnique437 2 ай бұрын

Thanks for the in-depth video

@vab007vab Жыл бұрын

You explanined everything so well. Gave me the confidence to try it because its doable. Thank You

@PaintSociety Жыл бұрын

You’re welcome 😊

@blackharvest5865 Жыл бұрын

I have a 1990 Honda and the back top coat is peeling so I'm Glad there is an affordable not to difficult way to fix this

@geobigntall3830 Ай бұрын

Best one I’ve seen yet great content

@bmindful 2 жыл бұрын

Wonderful vid 💪🏾 greatly appreciate your time and knowledge sir🙏🏾

@Rudeman780 4 ай бұрын

Dude !!! You make anything look good

@dirtyketchup 2 жыл бұрын

Can I ask a question? You mentioned that you didn't want to spray over the areas that still had good paint, and I noticed you kept true to that with the primer. It was a little harder to see with the base coat footage. Did you end up spraying the entire panel with the base coat, or did you leave some spots untouched? Same question for the clear…

@yeliu Жыл бұрын

Yes! I have the same question after watching the base coat portion a few times. Brian, please provide us some clarification if you don’t mind. Thanks!

@ramcentralstation Жыл бұрын

amazing work! I love your videos, very motivating.

@robinsonnunez2129 3 жыл бұрын

Love this jobs, I’ll be doing my Sienna peeling hood soon

@imthedudemane 3 жыл бұрын

Thank you so much man, bless your family!

@apoettker82 Жыл бұрын

I'm about to do this to an Infinity G35 Coupe. Thanks for the great video

@naorl8866 25 күн бұрын

Amazing diy job looks profesional!

@Peelerusa Жыл бұрын

I just finished the roof and trunk lid of a 2002 Honda Civic using your method and it went smoothly, although the metallic silver paint came out a little streaky. Since this was my first attempt at automotive painting, I am very happy with the over all finished product compared to how it looked prior. I used Spray Max 1K base and 2k Clear coat to achieve 3 coats of each, waiting the prescribed times for each coat to flash, but somehow ended up with some streaks in the base coat, so If anyone has an idea what I did wrong that may have caused the streaks, please let me know. All that's left is to wet sand the orange peel and polish it after the clear cures. I watched numerous KZfaq videos and this Paint Society tutorial was by far, the best. Thanks for posting it.

@xXPandakXx Жыл бұрын

Try watching his can spray paint video about like 5 months ago on how he minimized streaking on a panel

@jayantoine669 2 жыл бұрын

Fantastic video mate. I’m going to try this method on my Dad’s car.

@octane_rl4659 6 ай бұрын

Great video! easily explained, and great results!

@tv-ll5bl 2 жыл бұрын

Amazing results 👍very inspiring

@mando-hondadc2992 3 жыл бұрын

This car coming g out so nice. The level of detail

@godfamilycountry4211 3 жыл бұрын

Sweet. Always learn so much as a sub to your channel. Thx for taking the time to teach us. Looks great for low budget.👍

@sully3s 2 жыл бұрын

Thank you thank you thank you! Great info! I bought an e36 bmw that’s in pretty good shape but the clear coat is peeling and I’ve got some rust in a few spots. I’m gonna go for some paint repair using what I’m learning in your videos.

@rachelblack3816 2 жыл бұрын

"Don't overthink it, it's just paint!" Those words alone give me the confidence to try something like this. Thank you, sir.

@neverfoldent562 2 жыл бұрын

I gotta learn this guys way, the way it comes out is like new you would never know the difference..

@larryk.watson2778 3 жыл бұрын

You really produce absolutely wonderful content

@JavierLopez-po2dv Жыл бұрын

Is amazing how great you are with this painting work and the tutorial is excellent too thank you

@garethplaysdrums 3 жыл бұрын

Awesome video. Looks fantastic 👍👍👍

@husky1232 3 жыл бұрын

Come out really nice for rattle can nice job thank you Brian for the video

@vincentdoubt 2 жыл бұрын

Amazing skill . for the car more than 10 years , worth to try this method . looking at the result , I think you might prepare to paint the whole car .